Cisco :: What Are Equivalent Models From Netgear / Dlink And HP
Mar 10, 2013I am intetested in Cisco 2960 ttl models, but need to justify my choice over other brands.What are the equivalent models from netgear, Dlink and HP.
View 1 Replies
ADVERTISEMENT
DGN2200 - Connecting Netgear Modem With DLink Router?
Dec 24, 2011how can i connect a Net gear DGN2200 wireless modem router to a D link DGL4500 wireless router ??
View 1 Replies View RelatedCisco WAN :: What Is The Equivalent Command On IOS-XR 4.3.0
Jan 10, 2013I want to configure this:
ip vrf TEST
rd 65500:1
route-target export 65500:1
route-target import 65500:1
bgp next-hop Loopback500
on IOS-XR 4.3.0
What is the equivalent command on IOS-XR?
route-policy TEST1
set next-hop 1.1.1.1
vrf TEST
address-family ipv4 unicast
import route-policy TEST1
Cisco WAN :: What Is Equivalent For OTV For 6500 VSS
Mar 17, 2011what is the Equivalent for OTV for 6500 VSS,curently we r connected over L3 MPLS.
View 5 Replies View RelatedCisco WAN :: What Is TOS Value Equivalent To DSCP Value AF31
Dec 3, 2011I am wondering what is the TOS value equivalent to DSCP value AF31? I am wondering what is the TOS value equivalent to DSCP value AF31?I have tried to use the charts but I couldn’t understand how to convert it.
View 5 Replies View RelatedCisco WAN :: Second LAN Card On Models 1841 / 1941
Dec 18, 2011When two Routers Models 1941 (Main Router) and 1841 work connected with HSRP, and a second LAN card is added to each one of them If i connect the GE 0/1 and Fe 0/1 of each of one of them To FireWall1 (in cluster with FireWall2) AND i connect the second LAN (Added) of each one To FireWall2 (in cluster with FireWall1) If FireWall1 will failure , How can Router 1941 know, to move traffic from GE 0/1 to the second LAN card connected to FireWall2 (which is in charge now, by cluster definition)
View 2 Replies View RelatedCisco Wireless :: Are There Multiple Models Of AP541N
Nov 6, 2011We are considering order the AP541N for our network. A few questions...
1). Are there multiple models of the AP541N? or just one cisco part number?
2). I am assuming the basic antenna comes with it. If this is something that I need to buy seperate.
3). Are there part numbers for the POE injector? Need to know part numbers on the AP541N and the poe injectors?
4). We would buy a couple of these and run them in cluster mode. My understanding is that I won't need a controller. Do I need to buy a certain model to use the clustering or is that available on all the AP541N?
5). Can I have this talk to active directory to authenticate users? Is that tough to do? Do I need install some kind of agent on a domain controller? I have configured the ASA to use Active Directory for authentications. Should it be any more difficult that that?
I have setup a few other Cisco APs before and am generally familair with wireless. But, I am not a "wireless expert" and don't have any experience with this particular product.
Cisco Firewall :: Which Model Is Equivalent To Fortigate 310B
Sep 10, 2011My customer is looking for cisco firewall which is equivalent to Fortigate 310B.
View 2 Replies View RelatedCisco Wireless :: AP 1552 Is Equivalent Of Local Mode?
Jun 24, 2012I found this sentence in 1552 AP guide."AP1552 comes only in the Bridge mode and the mode cannot be changed. A mesh access point performs CleanAir function and also serves clients on the assigned channel similar to the way the Cisco Indoor CleanAir AP3500 (nonmesh mode) operating in LMAP mode serving clients on its assigned channel. The mesh AP also monitors the spectrum only on that channel."We want to use this AP as a local AP ( not for mesh deployments) and serve our wireless clients. The main thing why we need this is just operating temperature. Is it good choice? Does it will function as "normal" local AP or we will have any problems , because of that "mesh" mode?
View 12 Replies View RelatedCisco Routers :: RV082 - What Is QuickVPN Equivalent For Linux
Dec 22, 2011I want to connect from a Linux station to RV082, is it possible? What software can I use and with what configuration?
View 2 Replies View RelatedCisco Wireless :: Equivalent Of Linksys E3000 Router?
Oct 24, 2010What is the equivalent with Cisco of the Linksys e3000 router (dual band/dual radio/802.11n) ?
View 0 Replies View RelatedCisco Application :: Passdetect Command Equivalent In CSS 11503?
Sep 11, 2011what is the "passdetect" command equivalent in CSS 11503 load balancer. software version 8.20.
View 3 Replies View RelatedCisco WAN :: Show Etherchannel Summary Equivalent For 10008?
Dec 19, 2012Anyn equivalent command of show etherchannel summary for a 10008 router running 12.2(33)SB9 ?
View 1 Replies View RelatedDifferences Between Two Models Of 3850 Switches?
Mar 4, 2013We are looking at doing some switch replacement. These switches will be in for ~7 years.We need POE for a VOIP phone system, and 10gb uplinks back to the core. We want to have the ability to go POE+ in the future.
We were quoted from our vendor for:WS-C3850-48P-S with 2x715w Power supplies. It looks like the data sheet says that to get POE+ you need 2x1100w or 1x1100w & 1x715w. Do we need to step up to the WS-C3850-48PF-S?
Implement Based On Newer Models Of Cisco Switches
Mar 13, 2013(eth ports routing only) and a layer 2 switch into a cluster of two layer 3 switch clustered. I have looked at Cisco 3550 EMIs with HSRP but I would like to implement based on newer models of Cisco switches.
View 6 Replies View RelatedCisco :: Can Two Different Models Of 1400 Series Bridge Communicate
Sep 24, 2012We have acquired few AIR-BR1410A-A-K9 AP's that are for US only. I am in Pakistan. For our market, Cisco proposed AIR-BR1410A-E-K9. This is fine as it is listed on their website as well.However, since we also have the "A" model and now the "E" model, can we place an A model on one end and an E model on the other and make them communicate with each other?
View 3 Replies View RelatedCisco Routers :: Difference Between Models ASA5505 And RV042
Jul 10, 2012I am planning to build a site to site vpn tunnel, connecting 2-3 satellite office to the main office.After searching the product, I really don't understand the difference between models like the ASA5505 and RV042.Can I need to use ASA5505 in the main office while RV042 in the stallite offices? Or can I use RV042 (or upper) in all the office and it is enough for vpn tunnel?If it is the case, what is the benefit of ASA series over the RV series?
View 1 Replies View RelatedCisco Wireless :: AP Models Which Support 5500 Series?
May 25, 2012are there any AP models which support 5500 series and dont support 4400 series. Actually we are looking to get some new AP with higher bandwidth and External Antenna How to differentiate between AP models with clean air feature supported and not
View 5 Replies View RelatedCisco Application :: ACE4710 Deployment Models Required
May 31, 2011ACE 4710 deployment model. We'll be doing an eval later in the year, but I'm just looking to understand the architecture.We have a stack of 3750 switches with a single VLAN (10.1.1.0/24). Connected to that stack is a pair of web servers (10.1.1.5 and 6) that we want to provide load balancing/failover for. Some of the clients are located right there on that same VLAN. Other clients may be coming from other spots in the infrastructure.It sounds like I could put a pair of 4710s connected to that stack of switches, in a single arm deployment? And then the virtual IP and the real servers would all be 10.1.1.0/24. Maybe use an etherchanel to connect each 4710 to two 3750s?
View 9 Replies View RelatedCisco Wireless :: 541N - Models Of AP To Achieve Cluster
Feb 14, 2012I have one AP541N and need to extend the wireless network with a second wireless AP. Which models of AP can I use with the AP541N to achieve a 'cluster', please? Is it just with a second AP541N or can I use other Cisco APs to achieve the cluster?
Am I correct in thinking that doing this will allow wireless clients to 'roam' seamlessly between the two APs?
Cisco Infrastructure :: 5510 - Equivalent Of Netstat Command On Router
Jul 30, 2003Is there any way to see on what ports a Cisco 5510router is listening to just like a "netstat -an" on UNIX would do. I could easily do a portscan to give me this report but would prefer having the information through a show command.
View 4 Replies View RelatedCisco WAN :: ASR1001 BDI Configuration Equivalent To BVIs And Bridge-groups?
Jul 26, 2012I have been asked what the equivalent of bridge-groups and BVIs is for an ASR1001 and I am struggling to find an example.If we have this IOS configuration:
bridge 1 protocol ieee
bridge 1 route ip
!
interface GigabitEthernet0/1
bridge-group 1
[code]....
What would be the equivalent for an ASR1001 with IOS XE?
Cisco Switching/Routing :: 3570 Stackable Switches Models
Jun 23, 2012I want to be sure for this before ordering: is the Enterprise-class stackable switches "WS-C3750X-48T-S" model can be stackable with "WS-C3750G-48TS" model.
View 5 Replies View RelatedCisco Switching/Routing :: Decipher Differences Between Two Models Of 1921?
Mar 7, 2013I am trying to decipher the differences between the two models of the 1921 router. One has an IP Base IOS and the other has a Security IOS. I have an ASA so I don't think I need all the Security IOS bells and whistles on an internal router. Although, does the IP Base IOS allow for trunking and sub interfaces? I definitely need that and on CDW's website it says that the 1921-Sec/K9 w/ Security IOS includes 802.1Q and that spec is not listed on the 1921/K9 IP Base IOS model.
View 3 Replies View RelatedCisco Wireless :: AIR-CB21AG-W-K9 / Can't Add Data Points Under RF Calibration Models
Jun 1, 2011I am able to view clients, rogue APs, rogue clients etc, but the information is faily inaccurate. Thus, I am trying to calibrate using the RF calibration models. I have created a new model and am attempting to add data points.After adding the client MAC, selecting the floor plan and clicking next, the floor plan loads and a message pops up stating: "Could not enable S60 across all relevant controllers on this floor". I click OK, and select "point" as the calibration method. When I place the calibration point on the map and click GO I am presented with the following message: "Failed to initiate data collection. Please make sure your client is connected on the wireless network and then try again." Both of these messages can be seen in the attached screenshots.
I have confirmed that the client is associated to an AP located on the map.I have confirmed connectivity of the client.I have used both the Cisco AIR-CB21AG-W-K9 (CCX V5) and the integrated intel wireless card (CCX V4).I am running WCS 7.0.172.0, MSE 7.0.201.204, and WLC 7.0.116.0.
Cisco Switching/Routing :: Equivalent Command To Configure On Nexus 5596
Jun 21, 2012what is the equivalent command to configure on the Nexus 5596? OS version 5.1(3)N2(1) Catalyst 45k ip igmp snooping vlan 1036 mrouter interface Po20
View 1 Replies View RelatedSetup 2 Routers DLink DIR-655 / DLink DI-524 On Same Network?
Apr 25, 2012I have been putting up with rubbish wireless signal down one end of my house now for quite some time. So I thought I have a spare wireless router and I could put it down there but I am sure ts not as easy as just plugging it and away you go.
Network Setup
Router 1 is a D-Link DIR-655
Router 2 is a D-Link DI-524
I need to know how to setup Router 2 so it basically become just a wireless access point
Cisco Switching/Routing :: Equivalent Command To Show Int Summary On The Nexus 7000?
Nov 20, 2011tell me if there is an equivalent command to Show int Summary on the Nexus 7000?
eg
MYCISCOSW01#show int summary
*: interface is upIHQ: pkts in input hold queue IQD: pkts dropped from input queueOHQ: pkts in output hold queue OQD: pkts dropped from output queueRXBS: rx rate (bits/sec) RXPS: rx rate (pkts/sec)TXBS: tx rate (bits/sec) TXPS: tx rate (pkts/sec)TRTL: throttle count
[code]....
I find it a useful command on the 6500 to spot high traffic flows.
Cisco Wireless :: 3502s / Mixing AP Models - DHCP Versus DNS For Controller Discovery
Jan 3, 2011I'm adding some additional AP's (3502s) to an environment that is all 1131AG AP's. The DHCP is configured for DHCP option 43 for remote sites for layer 3 discovery. Since only one AP mode can use option 43, I've added a DNS entry for cisco-lwapp-controller in my local domain.My assumption here is that the new 3502's will be able to use DNS for discovery, while any additional 1131AG would continue to use DHCP option 43. will this work in a mixed environment?The new AP briefly showed up on my controller, but then disappeared. The LED is cycling red, green, off - indicating it is still in the discovery process. Could I effectively remove the option 43 in DHCP and have all AP's use DNS? Is this as reliable as option 43? What is the best practice for discovery?
View 6 Replies View RelatedTP-Link Dual-Band Wireless :: Difference Between Two Models / Wdr7500 And Tl-wdr4900?
Mar 31, 2013Region : Argentina
Model : TL-WDR4900
Hardware Version : V1
I am about to buy one of these two models tl-wdr7500 and tl-wdr4900 that look exactely the same and I am trying to figure out what is the difference between them?
Cisco :: 3560 Trunking With Dlink
Apr 1, 2012my current network setup is like this.. a cisco 3560 is connected on an access port to an adjacent dlink stack. i want to enable trunking between the cisco and the dlink. what i know is that dlink doesnot support per vlan STP while dlink only run single instance of the STP.. how can i make the trunking possible without messing with the network.
the idea that i have is to run MSTP instance on the 3560 so that it appears as a single STP to the dlink switch and then all good. is there any other way to do that. if i just make both the adjacent ports on both the switches as trunk and connect them, will it cause any problem in terms of STP issues or convergence ?
DLink DIR-615 Keeps Disconnecting?
Jul 3, 2011So far I have tried doing a factory reset, power cycling, upgrading my firmware, and changing my channel [even though there weren't any interfering networks on the same channel in my area].
This problem started a while ago and has been going on for several months now. I will lose access to the internet for a brief period of time [1-2 seconds], but this is very annoying. I will exit conversations on MSN, downloads will stop sometimes, and it is virtually impossible to play online multiplayer games since I keep losing connection every five minutes or so.
The connection works just fine when I connect my modem directly to my PC.
How To Connect Two Dlink 604
Jan 3, 2012I have two d link 604 and want to connect both together so that any pc connected to the repeater can connect to the internet. I am running win xp sp3,p4,2gb,asus p4p800-vm with all updates and firmware of router updated.
View 7 Replies View Related