Cisco :: CSC-SSM-20 Renew License To Support 750 Users?
Jan 8, 2012i have CSC-SSM-20 i want to renew the license to support 750 users for 3 years if i have base license only also if i have base and plus?
View 1 Repliesi have CSC-SSM-20 i want to renew the license to support 750 users for 3 years if i have base license only also if i have base and plus?
View 1 Replieswe have a customer with a ASA 5510 with a CSC module in it. The device tells us the Base license has expired. The new license has been renewed - after - the grace period. The Trendmicro site tells us the Base license is valid until 21 october 2013 but the CSC refuses to acknowledge this. The module is able to fetch updates form the Internet so it does not look like a connection problem to me (it also has a plus license which is also valid till far into 2013 and that one works).Is it possible that the current license key is "dead" and the CSC expects a new license key because the grace period was expired?
View 1 Replies View RelatedI have 10 user license for Cisco ASA, i have to use this ASA for client connectivity. Can i do NAT of more than 10 users with this license? What i understand is NO.
But as per Below explaination looks like, i can if i am not doing default routing? Actually i just need to add a specific Route towards client DMZ interface on my ASA, no default route, so can i use more than 10 concurrent sessions with this license?
i have bought the below licenses for the ASA5510 to upgrade from 2 to 250 users and yet i can give access to 2 users only.
L-ASA-AC-M-5510=
L-ASA-AC-E-5510=
Kindly find attached the "show version"
I´m trying to upgrade a Customer's ASA 5505 base license from 10 to 50 users (ASA5505-SW-10-50=). But the reseller sent a ASA5505-SW-50-UL= license instead. I tried to register that license and the following messaged appeared.
Wrong Sku(s) 'ASA5505-SW-50-UL=' for 'ASA5505-K8' : Device contains following licenses 'ASA5505-SW-10,ASA5500-ENCR-K9'
Serial Number = JMX1235Z0TZ
same platform type as the failed serial number. An upgrade request is not allowed. open a Service Request using the TAC Service Request Tool at [URL].As an alternative you may also call our main Technical Assistance Center at 800-553-2447.Sincerely,Cisco Systems Licensing.
I tried to contact TAC for assistance but It's not possible because that kind of service is outside the parameters of the service contracts associated with my cisco.com profile.
Currently we have a CISCO 3020 VPN Concentrator to terminate Lan-to-Lan tunnels and have our mobile workers connect via CISCO VPN client (300 users-employees and contractors-). Since this device is coming to an EOL this year we purchased a CISCO 5520 (below are the current licenses on it)
The licensing seems rather complicated, therefore this is my question:
- What VPN solution do you recommend for our users and contractors? it is my understanding the CISCO VPN client does not work with ASA 5500 series devices
- Is there a license needed to deploy VPN solutions for our remote users(employees/contractors)?
Getting the following alarm from my ISE:Cause:Base License Enforcement Details: Base concurrent users exceed license allowable count.Currently only using 1656 out of 2000 base licenses so I'm not sure what the issue is. Running 1.1.2.145 patch 3.
View 1 Replies View Relatedis it strange to have a valid license fro FL-WEBVPN10-K9 but not able to download the latest anyconnect for my router?
View 0 Replies View RelatedI have few question with WLC 2504 with 25 License AP. Our customer have SSID around 30 SSID then, is it possible to create WLAN around 30 SSID on WLC 2504? becuase i had tried to do it on WLC4404-25 License that can do or create WLAN with 30 SSID.
View 12 Replies View RelatedI purchased the license P/N: ASA-CSC20-250U-1Y with Description: ASA 5500 CSC-SSM-20 250-User License Only Renewal (1-year)
But I had a mistake because I need support to 500 users. Now, to solve my mistake I want to know Do I can purchase another ASA-CSC20-250U-1Y to provide the 500 users suppor?
I mean, ¿are two (2) ASA-CSC20-250U-1Y equivalent to the 500 user license listed below?P/N, ASA-CSC20-500U-1Y with Description: ASA 5500 CSC-SSM-20 500-User License Only Renewal (1-year)
What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.
View 1 Replies View RelatedI’m stuck in some problem with installation of LMS4.0 in customer site.
- we purchase a LMS4.0(CWLMS-4.0-100-K9) but couldn’t install it on Windows server 2008 R2 64bit because those things don’t support each other.
- I need to upgrade the LMS4.0 to LMS4.2 that is supporting Windows server 2008 R2 64bit.
- So, I ordered following items via product update tool (url...) [code]
- In this status, how to install LMS4.2 with license for 100 devices? If I install R-PI12-BASE-K9 first, can i enter a licese for 100 devices for CWLMS-4.0-100-K9 into PI1.2?
I have just moved my desktop to another house and now I cannot access the Internet. I have a USB adapter which has connected to the hub and has an excellent connection but it keeps trying to aquire network address. Then stops and starts again.
[code]...
i have flushed dns cache and i do not know how to renew dns suffix.
View 1 Replies View RelatedI lost connection for a moment on my computer last Sunday, it connects with a very strong signal but doesn't renew the IP address. I tried Run>cmd>/release>/renew and got a message saying something like "Cannot contact your DHCP server" (something like that anyways)
[code]....
i'm running xp sp3, but it is not completely updated. (i was offline for about 8 months and missed tons of updates, still slowly getting things up to date but not there yet.) i install new programs all the time, but none that seem to coincide with this particular problem.
starting a few days ago, my internet randomly goes out. when i try to "repair" my connection through network connections, it says windows cannot renew the ip address. going to command prompt and trying ipconfig/release or ipconfig/renew gives a message about RPC not available. however, a simple reboot fixes everything. for a few hours or so.
i haven't been able to pinpoint exactly when the problem occurs. i often leave utorrent and peerblock running when i go to work - no other programs running - this is what first alerted me to the problem, coming home to find that at some point my internet went down and downloads didn't finish. just this evening i was surfing the web, watching youtube videos, when suddenly my connection went out. this time, only firefox was running, so not a problem with utorrent or peerblock. something else is causing the problem.
We have a client that was using Eap TLS i think and their PKI Cert have expired. I took some notes so I appologize if this question is incomplete. ACS 4.2 is also being used. ?
How to renew these certs?
I am having some issues with my internet connection. release and renew method and using Google's DNS server.
Since last week, I have not been able to connect to the internet. I have had some trouble with this in the past when booting up, but usually I can manually select our wireless network on my own and it works fine. But since last week, I have not been able to connect at all. On the Wireless Connection Status, it showed Limited or No connectivity. I tried the repair button in the Wireless Network Connection Status Support tab, and that told me that I cannot connect because I could not renew my IP address.
View 7 Replies View RelatedProblem connecting to my girlfriends internet connection, just tried connecting for the first time and came across this limited or no connectivity message, using the cmd/renew IP address method did nothing and have no errors regarding any network adapters under the device manager.After doing the IPCONFIG /all function I get the following:
Windows IP configuration:
----Host name-----------: Steven-2720dfbd (This is my home host name so should have changed?)
---Primary Dns suffix-----:
---Mode Type------------: Unknown
---IP Routing Enabled----: No
---WINS Proxy Enabled---: No
[code]...
I can connect wired but not wirelessly. I get limited or no connectivity. When I try to repair I get the message "cannot connect to dhcp server. request has timed out"
View 2 Replies View RelatedI have two computers - one that is a newer mac with no problems getting on to the wireless home network (from which I'm posting). The other is an older Dell desktop running XP and using a wireless card. I'm trying to setup the desktop on a new network (has worked on other home networks in the past) and I keep getting the "Limited or No Connectivity" and the network repair fails because it can't renew the IP address. In the IP config, I'm getting the default 169.254.x.y.
View 10 Replies View RelatedI'm trying to go wireless with a desktop PC running Windows XP SP2. I've got a 2WIRE router which works fine when plugged into the computer via an ethernet cable. I purchased a Netgear N300 Wireless USB adapter and installed it - it seems to be working fine.
The trouble is that my wireless connection shows "limited or no connectivity," although the signal strength is "very good." When I try to repair the connection, it tells me that I could not be assigned an IP address.
At the moment I'm working via the Ethernet cable with no difficulty. why the wired connection works but the wireless (from the same router) doesn't, even though it should?
So I have decided to register here and see where that gets meWhen I try to repair my wireless network connection, it gives me the error: "Unable to renew your IP address" accompanied by a little bubble that says something about limited or no connectivity. Other computers are working fine, so I doubt it's the modem.If I try to go into the cmd and type in "ipconfig/release" it says that it's already been released. Then when I type in "ipconfig/renew" it takes a while, but tells me something along the lines of "unable to connect to your DHCP server."I've tried the winsock fix and that hasn't done me any good. I've also tried: netsh winsock reset, netsh int ip reset reset.log, and netsh winsock reset catalog. All useless.[CODE]
View 7 Replies View RelatedI wanted to connect to the Internet but my laptop has this message: " Your IP address lease has expired. DHCP was unable to renew your lease." I cannot connect to the Internet. What should I do?
View 1 Replies View RelatedWe currently are using a self-signed cert (for PEAP machine authentication) that was created on an ACS 3.3 appliance. That cert was manually installed on our laptops when they were configured for wireless conenctivity.My problem is, that self-signed cert will soon be expiring and I am not sure what needs to be done to issue a new cert AND deploy it to my Windows XP Pro clients without a service interruption. If possible, I'd like to leverage our exsiting AD infrastructure for this, but I need some direction, and time is of the essence!!
View 2 Replies View RelatedI have several Cisco WAP4410N access points. They are configured to automatically obtain an IP address through DHCP. This works fine, but I've discovered when the DHCP lease expires, the access point doesn't renew it. It continues to use the same IP address but does not renew the lease. If I reboot the access point, it will renew the lease again.Is this a known issue with the WAP4410N? Is there any way to work around this, other than setting a static IP address or rebooting regularly?
View 9 Replies View RelatedI use this computer at work and at home on wireless network. At work it has been fine but at home I sometimes get the "Limited or no conectivity" message. I have not tried any solutions yet as it usually goes away if I reboot and if that does not do it taking it to work (where it works FINE) and then back home ususlly fixes the problem. Last night I was able to go online and google something but when I clicked on a link it did nothing for several minutes and THEN told me I had 'Limited or no conectivity' where just a few minutes before I was 'connected' signal strength 'excellent'. When I click on 'repair connection' it tells me it can not renew IP address.As stated I have not tried anything, changed anything, and there is no one else using computers on the network
View 1 Replies View RelatedI have not been able to connect to the wireless connection. I have had some trouble with this in the past when booting up, but usually I can manually select our wireless network on my own and it works fine. But since last week, I have not been able to connect at all. On the Wireless Connection Status, it showed Limited or No connectivity. I tried the repair button in the Wireless Network Connection Status Support tab, and that told me that I cannot connect because I could not renew my IP address.I have tried a few different things, such as doing an ipconfig /release and /renew. Schools coming up, and itd be nice to have internet access on the laptop as well as our desktop.
View 1 Replies View Relatedwe have one mac, ipad, phones and one win 7 laptopinternet on that laptop Im using is horrendous. I am positive the problem is due to Ip conflict because recently I started getting the message about it,URL.
View 19 Replies View RelatedI purchased this pocket wifi last year and I use it with my iPad and used to use it with my current LAPTOP. It still connects to the iPad, but will not connect to the Laptop anymore, the laptop says it cannot renew IP address.
[code]....
My computer stopped connecting a few days ago. It had been working great until then. I have two other computers in the same wireless environment and they are working great. I've done all the preliminary checks and had all the settings checked by Comcast (my internet provider) but they were not able to evaluate the problem without cost. I've been unemployed for the last two years so I need to find another option to correct this issue. Every time I attempt to connect, windows says that they are unable to renew the IP address. Limited or no connectivity is shown. I've also noticed that If I leave the home where I'm trying to connect, I'm able to connect to outside sources like Wayport or any other network without any problem. My router is a Linksys Model #WRT320N. It's working just fine with the other computers in the house. I tried cleaning out all my "preferred networks" in the wireless Network Connection Properties but that didn't work either.
View 14 Replies View RelatedLaptop suddenly not connecting to Internet. Have tried clicking repair but no luck. Totally lost now - just keeps saying unable to IP address. Wireless network connection msg says limited or no connectivity... IP address says 169.254.98.210- nothing under default gateway.
View 14 Replies View Related