Cisco LAN :: Failed To Upgrade ASA5505 License From 10 To Unlimited Users
Sep 4, 2011
I´m trying to upgrade a Customer's ASA 5505 base license from 10 to 50 users (ASA5505-SW-10-50=). But the reseller sent a ASA5505-SW-50-UL= license instead. I tried to register that license and the following messaged appeared.
Wrong Sku(s) 'ASA5505-SW-50-UL=' for 'ASA5505-K8' : Device contains following licenses 'ASA5505-SW-10,ASA5500-ENCR-K9'
Serial Number = JMX1235Z0TZ
same platform type as the failed serial number. An upgrade request is not allowed. open a Service Request using the TAC Service Request Tool at [URL].As an alternative you may also call our main Technical Assistance Center at 800-553-2447.Sincerely,Cisco Systems Licensing.
I tried to contact TAC for assistance but It's not possible because that kind of service is outside the parameters of the service contracts associated with my cisco.com profile.
View 3 Replies
ADVERTISEMENT
Aug 17, 2011
I want to upgrade "inside hosts" from 10 to unlimited on a ASA5505-BUN-K9, Do I have to buy Security Plus license ( L-ASA5505-SEC-PL =) ) before activating ASA5505-SW-10-UL ?
View 3 Replies
View Related
Apr 20, 2012
I have 10 user license for Cisco ASA, i have to use this ASA for client connectivity. Can i do NAT of more than 10 users with this license? What i understand is NO.
But as per Below explaination looks like, i can if i am not doing default routing? Actually i just need to add a specific Route towards client DMZ interface on my ASA, no default route, so can i use more than 10 concurrent sessions with this license?
View 5 Replies
View Related
May 21, 2013
i have bought the below licenses for the ASA5510 to upgrade from 2 to 250 users and yet i can give access to 2 users only.
L-ASA-AC-M-5510=
L-ASA-AC-E-5510=
Kindly find attached the "show version"
View 6 Replies
View Related
May 10, 2011
I want to confirm if the upgrade license (ASA5505-SW-10-UL=) is backward compactible with PIX 501 firewall device? though pix 501is end of life bit i want to verify if the upgrade license for asa5505 will work with it?
View 4 Replies
View Related
Jan 19, 2012
I am having Cisco 3845 series router with c3900-universalk9-mz.SPA.151-4.M2.bin IOS . I want to install new Licence on it for DATA. When i am trying to install licence on it i am facing the error "% Error: License installation failed with error: XML parsing failed".
View 4 Replies
View Related
Feb 17, 2012
I have few licenses to be installed in my c2911/k9 router but there were errors while installing the license. [code]
View 5 Replies
View Related
Jan 8, 2012
i have CSC-SSM-20 i want to renew the license to support 750 users for 3 years if i have base license only also if i have base and plus?
View 1 Replies
View Related
Sep 19, 2011
have a ACS 5.2 version installed on Vmware . I purchased below liscense
Product Name : L-CSACS-5-LRG-LIC=
Product Description : L-CSACS-5-LRG-LIC= : ACS 5 Large Deployment License (Electronic Delivery)
When i am trying to upgrade the liscense i am getting an Error " Liscense file installation failed : The liscense file must contain single base liscense "
View 2 Replies
View Related
Jul 2, 2012
I have Cisco ASA5505 8.2(5) connected with Cisco 5520 8.2(1) via IPSEC tunnel, I was able to SSH from the inside 5520 to inside IP of the asa5505. but I after I upgrade the license to security plus at 5505 I lost the SSH and ASDM to inside IP of 5505 from the inside network of the 5520. however I still can use SSH and ASDM on outside IP of 5505.
I did a lot of testing to make it work but I couldn't I added SSH 0.0.0.0/0 inside and outside also I added acl on both interfaces. when I did a trace on the outside interface from the private network of 5520 to 5505 inside IP I got IPSEC spoofed by the way that trace only works with security plus because I try to test on all my other firewalls 8.2(5) it shows nothing and all my firewalls can accessed from the private network 5520 except the one with the security plus!
View 11 Replies
View Related
Jun 8, 2011
I have a spare ASA5505 w/Base License that we want to use as the router/firewall between our wi-fi network and our secondary internet connection. Currently we have a NetGear box as the router there and it is on its last legs. In order for the ASA w/Base license to be able to issue over 150 IP address via DHCP which license do I need to purchase for it.
View 7 Replies
View Related
Sep 5, 2012
I'm trying to install performance license on ACE 4710 appliance and it was failed. [code]
View 11 Replies
View Related
Aug 28, 2012
a client of ours bought an ASA5505-BUN-SEC-K9, and it was working fine, for some reason (beyond me) they flashed the memory and configuration in an attempt to fix smoe problems they were facing. Now they are faced with the dilema that the SEC license is no longer visible and usuable, so how can they recover this license knowing that they have bought the bbundle mentioned above?
View 1 Replies
View Related
Jun 12, 2013
i've checked in on one of our 5510's and also on a 5505 but i don't seem to find the license duration (i.e "perpetual).is this normal or just an IOS or platform specific? [code] Cisco Adaptive Security Appliance Software Version 8.2(5)
View 1 Replies
View Related
May 19, 2011
I have a guest network and lately I have been experiencing troubles with some users.The symptom, as I create a username and password and type'em in a laptop the authentication fields in the web authentication page don't keep the data as if I didn't type anything
WLC 4402-50
Version 7.0.98.210
View 7 Replies
View Related
Dec 26, 2011
My cisco representative tells me that I am limited to 10 IP addresses for my 10 user license on an ASA 5505 even though the Cisco documentation specifically states that a 10 user license allows the maximum DHCP clients to 32 IP addresses.
I want to have 30 computers get IP addresses from the ASA, but don't need any but one or two to get outside the internal network. Is this possible with a 10 USER license.
View 19 Replies
View Related
Sep 27, 2011
My cisco representative tells me that I am limited to 10 IP addresses for my 10 user license on an ASA 5505 even though the Cisco documentation specifically states that a 10 user license allows the maximum DHCP clients to 32 IP addresses.
I want to have 30 computers get IP addresses from the ASA, but don't need any but one or two to get outside the internal network. Is this possible with a 10 USER license.
View 1 Replies
View Related
Dec 18, 2011
we have a cisco ASA5505 with base license and 3 interface configured. Internal 192.168.1.1/24 DMZ 172.16.0.1/24 Outside 20.20.20.20/24 The DMZ is configured to allow the traffic pass to the outside interface only (base license allow only traffic to one interface) in order to let clients on this network to browse internet. On the outside interface there's a nat configuration that let the port 443 to be natted to an in internal server. Is it possible to let the clients in DMZ to access to the internal server on port 443 from the outside interface?
View 3 Replies
View Related
Apr 9, 2012
Currently we have a CISCO 3020 VPN Concentrator to terminate Lan-to-Lan tunnels and have our mobile workers connect via CISCO VPN client (300 users-employees and contractors-). Since this device is coming to an EOL this year we purchased a CISCO 5520 (below are the current licenses on it)
The licensing seems rather complicated, therefore this is my question:
- What VPN solution do you recommend for our users and contractors? it is my understanding the CISCO VPN client does not work with ASA 5500 series devices
- Is there a license needed to deploy VPN solutions for our remote users(employees/contractors)?
View 3 Replies
View Related
Jan 15, 2012
The installation of an ACE-4710 throughput upgrade license licence (ACE-AP-02-UP1) failed with an error message :CH01AC03/Admin# license install disk0:ACE20111213081741975.lic.Installing license... failed: No space left on device. [code]
View 4 Replies
View Related
Aug 2, 2011
How can I filter my local lan's URL requests? Is it possible to have some sort of list like...
Default_User_Group
*.microsoft.com/*
*.mydomain.com
*.google.com
Then only allow certain ip's access to the entire internet like this...
Internet_User_Group
It would be nice to possibly be able to add the rules to users in my domain, then associate the domain account with an IP OR have them login to view webpages.
View 12 Replies
View Related
Jan 21, 2013
I say the answer is ten. That means ten hosts can be behind the firewall and hit the internet. The eleventh doesn't get to go out. I'm being told by a coworker that the "10" in the part number refers to the number of IPsec VPN peers.
Who's right?
I say if you want an unlimited number of users on the inside to be able to get to the internet, you need the ASA5505-SEC-BUN-K9
Mfg. Part: ASA5505-SEC-BUN-K9
Mfg. Part: ASA5505-50-BUN-K9
Mfg. Part: ASA5505-BUN-K9
Cisco ASA 5505 10-User Bundle includes 8-port Fast Ethernet switch, 10 IPsec VPN peers, 2 Premium VPN peers, Triple Data Encryption Standard/Advanced Encryption Standard (3DES/AES) license ASA5505-BUN-K9
View 2 Replies
View Related
Aug 5, 2012
My VPN users are able to access IPV4 resources, but not IPV6, all of my other user who are not VPN users are able to access everything V4 and V6. So my network goes:
IPV4 flow = FIOS > ASA5505(IPV4 Router) > Switch > ipv4 Clients
IPV6 flow = FIOS > ASA5505(IPV4 Router) > switch > win2k8 (IPV6 Router / Tunnel) > ipv6 clients
View 1 Replies
View Related
Nov 30, 2012
2 Interface (at the moment Same Security Level same-security-taffic permit)
interface Vlan12
nameif STI-Netz
security-level 100
[Code].....
I I try to ping a Host in the ITCS Network (i.e. 192.168.50.10) from the STI Interface I get the error that it failes to locate next hop. I'm quite confused buceause this network are direct attached, so the routes should be fine:
6Nov 30 201215:01:16110003192.168.3.990192.168.50.100Routing failed to locate next hop for icmp from NP Identity Ifc:192.168.3.99/0 to STI-Netz:192.168.50.10/0
View 18 Replies
View Related
Feb 16, 2012
I have a ASA5505 and setup SSL VPN. My users can connect to the VPN but can't get access to any of the internal servers.
View 3 Replies
View Related
Mar 25, 2013
Getting the following alarm from my ISE:Cause:Base License Enforcement Details: Base concurrent users exceed license allowable count.Currently only using 1656 out of 2000 base licenses so I'm not sure what the issue is. Running 1.1.2.145 patch 3.
View 1 Replies
View Related
May 16, 2012
I am able to successfully connect to my ASA5505 via AnyConnect via a mobile device. Upon doing so, I lose internet connectivity. My access list appear to be correct to I'm sort of at a loss.
[code]....
View 6 Replies
View Related
Apr 2, 2013
I have ASA5540 with 1000 SSL-VPN License, then I would like upgrade from 1000 to 2000. Which part I have to add between
L-ASA-SSL-1000=
L-ASA-SSL-1K-2500=
ASA5500-SSL-1000=
View 1 Replies
View Related
Nov 15, 2012
We are currently preforming the upgrade from WCS v.7.0.230.0 no NCS 1.1. When we select the Lic file we get an error message "Unable to add any license without an NCS (L-NCS-1.0-K9) license." The file name is WCSUPG20121115142018448.lic.
View 2 Replies
View Related
Aug 11, 2011
My client is having a 5505 which supports 2 SSL peers as per now and we want an upgrade . I had a look into GPL and I was confused with two of the following part numbers . Which one should I go for as both of these look same for me and there is a huge difference in price .
ASA5500-SSL-10
ASA 5500 SSL VPN 10 Premium User License
ASA-AC-E-5505
AnyConnect Essentials VPN License - ASA 5505 (25 Users)
View 4 Replies
View Related
Feb 10, 2012
Not abe to upgrade the IOS image PIx7.0 from earlier version 6.3 in to my old Pix-525 FO(Secondary unit) license box .
Is it possible to upgrade without Primary unit (Unrestricted License) ?
View 6 Replies
View Related
Oct 12, 2011
I have a two ASA HA and I'd like to upgrade the license to ASA5500-SSL-250. I need to know if i have to purchase one license (ASA5500-SSL-250) for the Active unit and one license (ASA5500-SSL-250) for the standby unit.
View 3 Replies
View Related
Dec 17, 2012
I have a Cisco ASA 5505 device with basic (default) license, currently all my reirections, VPN's, VLAN's(3 Vlan's) etc are configured on the same and are working fine.Now i need to upgrade my basic license to "Security Plus" for some additional features, if i upgrade it directley is there any complications in present rules, below is my doubhts
1. if i upgrade, did it change any of my present configurations ?
2. is there any name change or property changes for VLAN's or VPN's
3. did it affect the firewall functions
4. If anything goes wrong, can i restore it in to my old state using my previous dump.
View 1 Replies
View Related
