Cisco Firewall :: ASA5505-BUN-K9 - Number Of Users
Jan 21, 2013
I say the answer is ten. That means ten hosts can be behind the firewall and hit the internet. The eleventh doesn't get to go out. I'm being told by a coworker that the "10" in the part number refers to the number of IPsec VPN peers.
Who's right?
I say if you want an unlimited number of users on the inside to be able to get to the internet, you need the ASA5505-SEC-BUN-K9
Mfg. Part: ASA5505-SEC-BUN-K9
Mfg. Part: ASA5505-50-BUN-K9
Mfg. Part: ASA5505-BUN-K9
Cisco ASA 5505 10-User Bundle includes 8-port Fast Ethernet switch, 10 IPsec VPN peers, 2 Premium VPN peers, Triple Data Encryption Standard/Advanced Encryption Standard (3DES/AES) license ASA5505-BUN-K9
View 2 Replies
ADVERTISEMENT
Feb 24, 2011
I have a normal setup of ASA5505 (without security license) connected behind an internet router. From the ASA5505 console I can ping the Internet. However, users behind the Firewall on the internal LAN, cannot ping the Internet even though NATing is configured. The users can ping the Inside interface of the Firewall so there is no internal reachability problem. In addition, I noticed that the NAT inside access list is not having any hit counts at all when users are trying to reach the internet.
When i replace the ASA5505 with a router with NAT overload configuration on it, the setup works normally and users are able to browse the internet.
The ASA5505 configuration is shown below.
hostname Firewall
interface Ethernet0/0
description Connected To Internet Router
switchport access vlan 10
[Code].....
View 2 Replies
View Related
Jul 5, 2012
How many user accounts i can create to a Cisco ASA box? Say for example a Cisco ASA 5510 or Cisco ASA 5520?
View 5 Replies
View Related
Apr 20, 2012
I have 10 user license for Cisco ASA, i have to use this ASA for client connectivity. Can i do NAT of more than 10 users with this license? What i understand is NO.
But as per Below explaination looks like, i can if i am not doing default routing? Actually i just need to add a specific Route towards client DMZ interface on my ASA, no default route, so can i use more than 10 concurrent sessions with this license?
View 5 Replies
View Related
Aug 2, 2011
How can I filter my local lan's URL requests? Is it possible to have some sort of list like...
Default_User_Group
*.microsoft.com/*
*.mydomain.com
*.google.com
Then only allow certain ip's access to the entire internet like this...
Internet_User_Group
It would be nice to possibly be able to add the rules to users in my domain, then associate the domain account with an IP OR have them login to view webpages.
View 12 Replies
View Related
Aug 5, 2012
My VPN users are able to access IPV4 resources, but not IPV6, all of my other user who are not VPN users are able to access everything V4 and V6. So my network goes:
IPV4 flow = FIOS > ASA5505(IPV4 Router) > Switch > ipv4 Clients
IPV6 flow = FIOS > ASA5505(IPV4 Router) > switch > win2k8 (IPV6 Router / Tunnel) > ipv6 clients
View 1 Replies
View Related
Apr 16, 2013
This is a feature that I have researched for by looking at ISRs G2 data sheets and cisco.com website.The number of users that can be supported or the recommended number of users per router chassis/model is not mentioned anywhere.However this is mentioned in the Cisco 880 ISR data sheet. What are the number of users that can be supported or the recommended number of users on Cisco 1900/2900/3900 ISRs?
View 4 Replies
View Related
Apr 24, 2012
I have a question regarding the number of computers connecting to a single wireless router. I want my internet connection at home to be used only by my laptop. I have my connection secured by password and etc, but I was wondering if there is a setting I can use to control the number of computers connected to a wireless router?
View 2 Replies
View Related
Apr 15, 2013
I am considering deploying several of these for our church to provide internet access. When reading the manual, I found on the last few pages that the device only supports a max of 63 users at a time. Is that correct? If so, any way to add more ?
View 1 Replies
View Related
Apr 17, 2011
Im using AIR-LAP1142N-N-K9 access points (it supports b/g/n). Somestimes the AP has up to 80 users connect to it.SOme recommends the AP should have between 25-35 users max.Any one know the recommend maximum number of users connect to a AP? And how can you tell the traffic going through the AP is congested?
View 1 Replies
View Related
May 16, 2012
Can i connect about 12 devices (laptops and mobile phones) to a 8 mbps or 16 mbps wifi router?
View 1 Replies
View Related
Nov 14, 2012
I was at a site recently and tried to load a windows anyconnect package but got an error saying there was not enough memory on the system to do this. They already have a mac one but wanted windows for future use.
128 Flash
256 Mem
ASA Version 8.4(4)1
asa844-1-k8.bin
View 1 Replies
View Related
Feb 28, 2012
Is it possible to configure WLC so that only one user can connect to wireless network at a time with one login? We have WLC5508 (7.2.103.0) web authentication with LDAP (Active Directory).
View 2 Replies
View Related
Apr 26, 2013
I wanted to know if anyone can say with certainty how many clients can stay connected 'Aironet 1140 series. I state that I should connect WiFi in about 350 clients.
View 6 Replies
View Related
Feb 16, 2012
I have a ASA5505 and setup SSL VPN. My users can connect to the VPN but can't get access to any of the internal servers.
View 3 Replies
View Related
Sep 4, 2011
I´m trying to upgrade a Customer's ASA 5505 base license from 10 to 50 users (ASA5505-SW-10-50=). But the reseller sent a ASA5505-SW-50-UL= license instead. I tried to register that license and the following messaged appeared.
Wrong Sku(s) 'ASA5505-SW-50-UL=' for 'ASA5505-K8' : Device contains following licenses 'ASA5505-SW-10,ASA5500-ENCR-K9'
Serial Number = JMX1235Z0TZ
same platform type as the failed serial number. An upgrade request is not allowed. open a Service Request using the TAC Service Request Tool at [URL].As an alternative you may also call our main Technical Assistance Center at 800-553-2447.Sincerely,Cisco Systems Licensing.
I tried to contact TAC for assistance but It's not possible because that kind of service is outside the parameters of the service contracts associated with my cisco.com profile.
View 3 Replies
View Related
May 16, 2012
I am able to successfully connect to my ASA5505 via AnyConnect via a mobile device. Upon doing so, I lose internet connectivity. My access list appear to be correct to I'm sort of at a loss.
[code]....
View 6 Replies
View Related
Nov 17, 2011
Is there any significance to the parameter "firewall-group" in the command
firewall vlan-group <firewall-group> <vlan-id>…<vlan-id>?
In other words is the series of commands
firewall switch 1 module 3 vlan-group 1,2
firewall vlan-group 1 100,101,102
firewall vlan-group 2 200,201,202
exactly equivalent to
firewall switch 1 module 3 vlan-group 3
firewall vlan-group 3 100,101,102,200,201,202
or
firewall switch 1 module 3 vlan-group 1,2,3
firewall vlan-group 1 100,200
firewall vlan-group 2 101,201
firewall vlan-group 3 102,202
All three of these options associate the same set of vlans to the FWSM but using different groupings. As far as I can tell, these groupings have no functional significance either on the switch side or the FWSM side. These are simply three different ways of specifying exactly the same thing? Am I correct?
View 2 Replies
View Related
Feb 26, 2013
I have some problem with the ASA 5510 ver 7.0(6). My manager wants to keep this as backup. tried lots of things but still users not able to access internet nor can i ping anywhere.For example when i ping 4.2.2.2 i dont get any reply.The runing config is below for ur ref :
HQ-ASA-01# show running-config
: Saved
:
[Code]......
View 9 Replies
View Related
Jan 25, 2012
I purchased the license P/N: ASA-CSC20-250U-1Y with Description: ASA 5500 CSC-SSM-20 250-User License Only Renewal (1-year)
But I had a mistake because I need support to 500 users. Now, to solve my mistake I want to know Do I can purchase another ASA-CSC20-250U-1Y to provide the 500 users suppor?
I mean, ¿are two (2) ASA-CSC20-250U-1Y equivalent to the 500 user license listed below?P/N, ASA-CSC20-500U-1Y with Description: ASA 5500 CSC-SSM-20 500-User License Only Renewal (1-year)
View 1 Replies
View Related
May 17, 2011
i have asa 5505 with the asdm v5.2 (4), and the asa v7.2(4). This platform has a base license. if i upgrade adsm and asa on v6.2(1) and v8.2(2) if I lose my license and that you need to activate them? i configured site to site vpn (this firewall and the another) that i lose my configuration if i upgrade my firewall.
View 2 Replies
View Related
Jul 14, 2011
I've recently upgraded my old firewall from a PIX to an ASA5505 and have been trying to match up the configuration settings to no avail. I have is that I can't ping the new firewall on it's inside interface, despite having "icmp permit any inside" in the running config. Secondly, the server I have on there ("Sar") can't connect out to the internet.I've included the ASA's running config incase anybody can see if something stands out. I have a feeling it's either not letting anything onto the inside interface, or there is no nat going on. Lastly (and possibly relevant), the firewall is actually going at the end of a vlan, which is different to the firewall's inside vlan number. I don't know if this is actually the problem because the server can't connect out even if connected directly into the firewall.
View 32 Replies
View Related
Jan 9, 2013
Internet ISP -> Juniper SRX 210 Ge-0/0/0
Juniper fe0/0/2 -> Cisco ASA 5505
Cisco ASA 5505 - >Inernal LAN switch.
1. Internet is connected to Juniper Ge0/0/0 via /30 IP.
2. Juniper fe0/0/2 port is configured as inet port and configured the Internal public LAN pool provided by the ISP. And this port is directly connected to Cisco ASA 5505 E0/0. Its a /28 pool IP address. This interface is configured as outside and security level set to 0.
From Juniper SRX, am able to ping public Internet IPs (8.8.8.8).
Issue:
1. From ASA am unable to ping public ip configured on Juniper G0/0/0 port.(/30)
2. From ASA no other Public internet IP is pinging.
Troubleshooting Done so far.
1, Configured icmp inspection on ASA.
2. Used the packet tracer in ASA, it shows the packet is flowing outside without a drop.
3. Allowed all services in untrust zone in bound traffic in Juniper SRX.
4. Viewed the logs when I was trying the ping 8.8.8.8 in ASA. It says "Tear down ICMP connection for faddrr **** gaddr **
View 2 Replies
View Related
Apr 1, 2013
I'm trying to troubleshoot an ASA5505.
The original goal was to block "Mumble/Murmur" (a voip app) traffic, which runs on TCP/UDP 64738, both inbound and outbound, except to a certain host (63.223.117.170).
However, when nothing I tried seemed to make a difference, just to troubleshoot, I decided to try blocking all inbound traffic. I first disconnected ethernet port 0/0 to ensure that it was cabled correctly and the outside interface went down when I did. That worked as expected, so I confirmed I had the right interface and it was cabled correctly.
I then applied a "any any deny ip" rule as the first element in the outside interface access_list, as you can see below. However, it appears to have had no real effect and the hit count is very low (it should be astronomical).
show ver
Cisco Adaptive Security Appliance Software Version 9.0(2)
Device Manager Version 7.1(2)
Compiled on Thu 21-Feb-13 13:10 by builders
System image file is "disk0:/asa902-k8.bin"
[Code].....
View 4 Replies
View Related
Mar 26, 2011
I have some tunnels which terminate to my home router. I'm allowing the other ends of the tunnels to use my voice setup. I need to prepend *67 to all called numbers which don't originate from my house. I don't want people calling my home number based on the caller-id number they see when someone across one of the tunnels calls.
So if 5008 calls 212-333-4444 I want it sent to my provider as *672123334444. If 5001 calls a number, I don't want it touched. Can I do this? I can use IOS or CUCM here.
View 13 Replies
View Related
Sep 29, 2011
I am using ASA5510, and I would like to know if we should reset the number of Hits for ACL ? Actually this number increase in front of each ACL. Is there any specific configuration ?
View 4 Replies
View Related
Sep 10, 2012
Is there a cisco best practice on the maximum number of NAT statements on a Cisco ASA? We have a 5520 and a coworker is adding static NAT policies so a vendor can monitor around 1,029 nodes. The problem is each node inside is a 10.X.X.X and to keep the IPs from overlapping with other customers the vendor monitors they would like us to NAT to a 172.16.X.X scheme.
View 3 Replies
View Related
Jan 5, 2013
What is the max number of policies can ASA 5525X supports ? I dont find it in the datasheet.
View 5 Replies
View Related
Apr 12, 2011
On my Pix515E ASDM console I quite often see large surges in the total number of connections. I would like to find a convenient way to see what (or who) is causing this.
The command Show Local gives the answers but it returns details of each connection and I can't see a way to omit the detail. Show Conn Count just gives the total. Ideally I would like to get a summary of the number of connections (TCP/UDP) for each inside host.
On a related matter I have used........
static (inside,outside) 12.34.56.00 2.34.56.00 netmask 255.255.255.0 tcp 400 100 udp 200 ..........to limit the number of connections to a subnet.This works and I see errors in the syslog when the limit is exceeded but when I change the limits and apply the changes, the syslog errors still show the previous limit being reached. How can I make changes to these connection limits take effect (without reloading the Pix)?
View 3 Replies
View Related
Sep 27, 2011
How can I find the serial number at Cisco PIX-515E ?
View 2 Replies
View Related
Apr 13, 2013
I am trying to find the part number for the Cisco SMARTnet Maintenance 8x5xNBD for the Cisco ASA5510-SEC-BUN-K9. I browse cisco website, tried dynamic config tool, forums etc but no luck.
1: How to know the part number for it.
2: Which tool can be used to find smartnet or other Maintenance details/partnumbers
3: Is there any specific tool other then Dynamic Config to generate BOM.
View 1 Replies
View Related
Feb 15, 2010
Showing Your firewall has a version number null which is not supported by ASDM 6.2(5). I received this error when trying to run asdm on my asa 5505. I upgraded image and asdm trying different versions. I used many different versions of java all to no avail.
View 4 Replies
View Related
Jul 3, 2011
I would like to order module card CSC-SSM with premium plus license but i don't know which part number with have : Plus license: Adds anti-spam, anti-phishing, URL blocking/filtering and content control
i saw part number ASA5510-CSC10-K9 but it standard license and it dont'have adds anti-spam, anti-phishing, URL Blocking/frltering and content.
Note;i use ASA 5510.
View 1 Replies
View Related
