I have a question regarding the number of computers connecting to a single wireless router. I want my internet connection at home to be used only by my laptop. I have my connection secured by password and etc, but I was wondering if there is a setting I can use to control the number of computers connected to a wireless router?
View 2 RepliesI am considering deploying several of these for our church to provide internet access. When reading the manual, I found on the last few pages that the device only supports a max of 63 users at a time. Is that correct? If so, any way to add more ?
View 1 Replies View RelatedI wanted to know if anyone can say with certainty how many clients can stay connected 'Aironet 1140 series. I state that I should connect WiFi in about 350 clients.
View 6 Replies View RelatedFor our children, we use the parental control feature of the DIR-615 (RevD, FW4.11b15), which works excellently. I use the whitelist feature, so only trusted web sites can be accessed. Unfortunately the DIR-615 only has 10 entries in that list and I will soon need more. So I wonder if there is another D-Link router that offers a bigger list with maybe 50 or even 100 entries?
View 4 Replies View RelatedHow to find out the upper limit of ACL on CISCO876-SEC-I-K9 router. How to measure performance parameter on the same as BGP is running on this router.
View 1 Replies View RelatedCan i connect about 12 devices (laptops and mobile phones) to a 8 mbps or 16 mbps wifi router?
View 1 Replies View RelatedThis is a feature that I have researched for by looking at ISRs G2 data sheets and cisco.com website.The number of users that can be supported or the recommended number of users per router chassis/model is not mentioned anywhere.However this is mentioned in the Cisco 880 ISR data sheet. What are the number of users that can be supported or the recommended number of users on Cisco 1900/2900/3900 ISRs?
View 4 Replies View RelatedI say the answer is ten. That means ten hosts can be behind the firewall and hit the internet. The eleventh doesn't get to go out. I'm being told by a coworker that the "10" in the part number refers to the number of IPsec VPN peers.
Who's right?
I say if you want an unlimited number of users on the inside to be able to get to the internet, you need the ASA5505-SEC-BUN-K9
Mfg. Part: ASA5505-SEC-BUN-K9
Mfg. Part: ASA5505-50-BUN-K9
Mfg. Part: ASA5505-BUN-K9
Cisco ASA 5505 10-User Bundle includes 8-port Fast Ethernet switch, 10 IPsec VPN peers, 2 Premium VPN peers, Triple Data Encryption Standard/Advanced Encryption Standard (3DES/AES) license ASA5505-BUN-K9
Im using AIR-LAP1142N-N-K9 access points (it supports b/g/n). Somestimes the AP has up to 80 users connect to it.SOme recommends the AP should have between 25-35 users max.Any one know the recommend maximum number of users connect to a AP? And how can you tell the traffic going through the AP is congested?
View 1 Replies View RelatedI would like to know about asa 5500-x. Does it supports application visibility and granular control for different applications. Moreover bandwidth control based on different users and different applications
View 1 Replies View RelatedIs it possible to configure WLC so that only one user can connect to wireless network at a time with one login? We have WLC5508 (7.2.103.0) web authentication with LDAP (Active Directory).
View 2 Replies View RelatedHow many user accounts i can create to a Cisco ASA box? Say for example a Cisco ASA 5510 or Cisco ASA 5520?
View 5 Replies View RelatedHow to control the speed and datausage for different users in wifi using java.
View 3 Replies View RelatedI have some tunnels which terminate to my home router. I'm allowing the other ends of the tunnels to use my voice setup. I need to prepend *67 to all called numbers which don't originate from my house. I don't want people calling my home number based on the caller-id number they see when someone across one of the tunnels calls.
So if 5008 calls 212-333-4444 I want it sent to my provider as *672123334444. If 5001 calls a number, I don't want it touched. Can I do this? I can use IOS or CUCM here.
I am currently at a standstill when it comes to our desired set up for the following:Originally we purchased an iPad app called Luminair, which works as a DMX board. The idea was to be able to control a set of light fixtures hard lined into a Linksys WRT54G router, which would then allow us to control the lights with the iPad and the Luminair App.After quite a long time and a lot of different settings, I've found myself at this point:We recently were able to connect and control our lights from DMX Workshop, an application running on a Windows 7 64bit connected directly to the fixture through a standard ethernet cord. Both the computer and fixture are set at a 2.x.x.x IP address and a 255.0.0.0 subnet. To allow the two systems to connect andw work with each other, the speed had to be throttled from 100Mb to 10Mb.
I've now tried to introduce the Linksys WRT54G router in between the computer and the fixture hard lined with ethernet cables. My hope is to establish a connection with this setup, and then swap the computer for the iPad.Is it possible to set up the Linksys to a 255.0.0.0 subnet? And do you think it needs to be at this subnet and a 2.x.x.x IP to allow it to work?Also, is it possible to throttle the speed in the router to 10Mb as well, because if it is trying to connect at 100mbps, I am confident it will not work.
Sports bar with many Tv's playing differnet games, want the ability to have tables select the tv and hear the audio for their TV,Each table to have set of small speakers and a dial to select the tv.
View 1 Replies View RelatedI just installed Windows XP Professional on my Toshiba-X205 laptop and I am having a problem getting the OS to detect my NIC. I can not remember how to go into the control panel and configure settings so the OS will detect my wireless network or should i say i can not get my OS to detect my NIC so i can to connect to my wireless network. I think i may need to install the device driver for the NIC but i don't remember which driver i need for the NIC of my laptop and i can not find it on the Toshiba website, not supported anymore.
View 1 Replies View RelatedI have a fairly simple WLC 2100 configured to control two APs. We had a power outage a few days ago, and though the WLC was on a surge protector, it did not come back up properly after the outage. The STATUS light sticks at amber and I can't get any console response. At this point I'm not sure what to do except replace the WLC, though I'm loathed to do that as our budget was just cut substantially for next year and we're trying to turn nickels into pennies.
View 4 Replies View RelatedI am trying to connet to the internet but it keeps telling me the radio on my 802.11 network adapter is still disabled. Use the hardware radio control switch enable it.I have had this laptop since 2004, I was on the internet before I got my new gateway laptop with vista windows. I went an turned on the emachine laptop and I don't no how to connect back to the internet. This has windows xp on it. I use to be able to run both machines.
View 1 Replies View Relatedproblems with laptop, one of which is i am unable to get wireless connection again, no network connections are appearing in control panel?
View 5 Replies View RelatedI have a Toshiba Tablet PC that came with the configfree software. It worked fine for a while but then it started giving connectivity problems. I tryed to disable Configfree by all means possible to no avail. Then I decided to uninstall it successfully, but I still can't return the network connections control to windows. It seems like it is still under configfree. My guess is that some internal switch at the registry level is still saying that the wireless control is not windows.
View 1 Replies View RelatedRegion : UnitedArabEmirates
Model : TL-WR941ND
Hardware Version : Not Clear
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : etisalat.ae
How to controller wireless bandwidth in WE941ND.
just i purchase cisco access point and I tried to access control panel to setup wireless security but the page i issued not display 192.168.1.245, there is any wayes to connet device web base ??
View 4 Replies View RelatedI have connected the USB drive. I can copy file to the drive, but I have not figured out how to set users or groups I see the Access part of the screen open then close before I can set permissions. I just started with this today, so I figure I am doing something wrong. Everyone can access the files now, but I want to control who can, how do I do this?
View 2 Replies View RelatedMy sister had Time Warner road runner cable hooked up today. They gave her a Ubee combo modem and router in one box. When she tries to connect, it does not show up on the list of wlan connections in taskbar. I went thru network settings to try and set up the Ubee and it pops up in a few seconds, then tells you to hit next button and then ask for a 4 to 8 digit pin number which it says is on the modem.
View 1 Replies View Relatedi just need to know how to find my wep number on my computer cant seem to find it
View 3 Replies View RelatedI have a situation where I have tenants connecting to my wireless network and paying towards the internet bill. I am able to control this by using MAC filtering, but I have just realised that this only works for wireless clients.
Is there a way to replicate this for the router's Lan ports? Or possibly even just disable Lan access. The router model is a D-link DSL-2750U.
I am trying to use the Parental Control feature. I can't use Cisco Connect as there currently isn't an update for this router for Mac OSX Lion The firmware version in the support site hasn't been updated for ages, and I am running the latest (v 1.0.04) The Parental control tab, that is supposed to appear in the web browser interface isn't there. It's supposed to be, but doesn't show up.
View 5 Replies View RelatedRegion : Spain
Model : TD-W8968
Hardware Version : V1
Firmware Version :
I have a TD-W8970. In settings "Bandwidth Manager" there is an option to put a value between 1 and 8, but does not specify which is better (1 or 8). What the value to give more priority to a computer to another?
Just installed the E3200 and use to have a WRT54G. Wanted the N Band.Noticed two major deficiencies.
1) this device does not have Internet Access Policy option and the Parental Control interface is unbelievably poor?There are very few options to work with in terms of time of day to turn on and off blocking access. (Half hour increments only, not 5 minutes increments that I was use to). The "FROM" Field has AM only and the "TO" filed has PM only. This means if you wish a device to have access pass Midnight, you can't, or if you wish to block beginning in the AM, you can't. Furthermore there are no day selections, just School Night and Weekend Night. What if you just want to block school Night. You can't "turn off" weekend. Is there a way to gett full Internet Access firmware into this device.
2) When using Parental Control the devices to restrict access are only displayed by default names. I have 8 devices on the LAN and half of them say Network Device. Any way to identify them by a device name or MAC ID?
I have several laptops at home that connect via wireless connection tot he DIR_655. Using the MAC address of those laptops, I want to prevent them from going to certain websites.Under 'Advanced" and "Website Filter", I addes several domain names (websudoku.com for example). I selected "DENY computersaccess to ONLY these sites". I then saved settings.I then went to "Access Control". I clicked on "Enable Access Control".I clicked on "Add Policy" to cdreate a new policy for one of the laptops.When I boot the laptop and go to one of the websites, it still allows me access. The URL/domain name is correct.
View 5 Replies View RelatedI would like to see the full range of 24 hours for setting parental controls on devices. As it stands now, I can only select a block of time that starts in the PM and ends in the AM. This isn't very useful if for instance I want to limit internet while my kids are home alone after school, from 3 PM to 5 PM, or say on the weekends to limit it from 7 AM to 5 PM. Just a suggestion that would make life a bit easier!
View 1 Replies View RelatedRegion : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP :
Setting up access control for one PC. I just want to block all internet access to one PC during a certain time. It seems like my only options in the Access Control page in the GUI is to block websites or domains.