We're running LMS 3.2 with DFM 3.2, and at some point within the last month, email notifications from DFM have stopped flowing. DFM is trapping events as they occur and these are viewable through the portal, but notifications that should be going out as email and SMS messages have stopped.
[code]...
Backups going back beyond when this is believed to have stopped working are available if something needs to be restored. If that's the direction I need to go, how do I restore just the DFM portion of the database? If backup restore is not the way to proceed, what other advice can be provided.
I have been trying to setup my DIR-655 A4 (Firmware 1.34NA) router to send me email notifications on new firmwares, when the log is full and every Saturday. So I have a schedule already created for sending the emails on Saturday and I also have the option to send notification of new firmware checked. Now I have settings, similar to the following, under email settings.
setting up the email notifications. I need the log emailed to me during a certain time of the day and it wont email anything. Even when I am in the log and push the email now, it does nothing. I've tried setting it up through hotmail, lmsn live, and gmail. None of them work. What am I doing wrong or what do I need to do?
DIR-655(A3) 1.33NAb02_HNAP_beta I used to be able to send notifications on log full etc... When my ISP was still allowing outbound email w/opt out of block on port 25. This worked on my old DI-524, and used to work on my DIR-655.In an effort to clamp down on spam my ISP formerly SBC now AT&T began requiring SSL. Secure Authentication is not required. With the ever increasing concern for controlling spam DLink really needs to get in gear and provide the support customers need and back the efforts of ISP's to control spam. Otherwise it's wasted code occupying space. On that note if space is a concern, need space for the code ~ throw SecureSpot out !
[URL]
On the Outgoing Server (SMTP) Settings window click Edit and verify:
# Server Name - displays smtp.att.yahoo.com. # Port - displays 465.
Note: When updating the secure server settings, check SSL checkbox first to update the port setting.
* Under Outgoing mail (SMTP), the box next to server requires a secure connection (SSL) is checked. This works flawlessly with Thunderbird and other mail clients therefore it is clearly a shortcoming of the firmware on the DIR-655 i.e. no SSL? This is totally inadequate.
I have a 4507R that will be using track and sla for failover/failback on two WAN circuits going out of my switch. Is there a way to configure an email notification, or some other sort of notification to let me know which route is being used, especially when the failover kicks over to by backup route.
I have 2 Cisco 5508 Wireless LAN Controllers.They are NOT connected to a WCS.Is there a way to configure the 5508's to send email notifications when an AP drops off line?Is not is this functionality available with either a WCS or new NCS?
I have been a loyal customer of a hosting company for over 10 years. The main reason I have a dedicated server is to eliminate those shared-hosting issues.For the past 4 years the service has been getting crappier. In fact; this week alone the ftp stopped working, mysql stopped working, and email.It is now to the point I have to move all my domains, mssql databases, mysql databases, email servers and countless files.I have been contemplating to set up my own dedicated server (Mac) and hook it up to my ISP. Most of the websites I host are local - only one or two are national/international.
I have a question about NAT behavior on FWSM 4.0. The problem is email server (Company A) cannot connect to email gateway (Company B) on the outside network and it randomly happen. I got this error from server guy "Detail: xlate has blocked the connection between A’s mail gateway and B’s mail gateway". It work fine again after clear xlate on firewall. [code]
1. How FWSM create xlate table like that? I mean it look like NAT0 for 158.137.21.26 but it doesn't has any nat rule for 158.137.21.26 on firewall.
2. What does it mean "connections 24" at the first of line? In the normal time, I only see the connections is 0 like the second line of xlate
3. After clear xlate global 158.137.21.26, the first line of xlate table is gone then email server can connect each other. Does is a bug on FWSM? or This is a normal NAT behavior of FWSM.
I deleted an incoming email titled troy from my email inbox by mistake I need to recover this email as it came from my son in bali [URL] edited by moderator: Deleted Email address to prevent Spam
Am running LMS 4.0 on windows 2003 server, i would like to disable or remove notifications with the EventName 'ExceededMaximumUptime' and 'BackupActivated' on the device fault summary view. How do i achieve this? This will be useful in only monitoring fewer notifications.
We have a 2800 router which is configured as a Voice Gateway. For some reason, yesterday we started getting DFM notifications like the one below. We seems to get an active messages every few 10mins or so, then a few minutes later the message will clear before becoming active again...
EVENT ID = 0009NK2 ALERT ID = 0000QTM TIME = Tue 21-Jun-2011 16:06:50 BST STATUS = Active SEVERITY = Critical MANAGED OBJECT = XXXXVG1 MANAGED OBJECT TYPE = Routers.
I am having an issue at one of our remote agencies whereas we are getting numerous mac-flap notifications on our switches. This has become kind of a hinderance as we are getting tired of seeing these messages. The end users havent been complaining.
It's usually occurring with the same mac-addresses over and over. Upon further investigation, we found the mac-addresses are all on laptops which have both wireless and wired nic's. There are wireless AP's (cisco 1242's) in use which they can connect. We also found where the error is popping up as they move from wireless into docking into their docking station which has a lan cable attached. I was under the assumption that the wireless mac and wired mac were different numbers and therefore if the wired was up simultaneously with the wired, as it switched over, they shouldn't get a flap.
Is there a way to get notifications (emails) when the external ip changes and the rotuer updates dyndns?i need to get an email about this change of ip. The only constraint is it has to work without a computer attached to the router as it would have to be powered on 24/7 So ip change notifiers like trueip or ipcheck won't work as they are programs that run in a computer.
We're currently evaluating Cisco Prime LMS 4.2.Something we've been trying to achieve for the past couple of days is to have LMS notify us when a Microsoft Host is Unreachable, and then to notify us once that alarm has cleared (the Microsoft Host is Reachable again).
We're at the point where the Microsoft Host was discovered, LMS incorrectly identified it as a Cisco Call Manager, so we changed it's identity to non-cisco device > microsoft host > microsoft host. LMS currently has the device listed as being in the 'Questioned' state. SNMP timeout has been set to 15 seconds, and the SNMP community is correct.
Being new to LMS Prime, and having not received any training on the product to this point, we turned to the admin guide, but we couldn't find anything that goes into detail for how to manage the notification for non-Cisco devices.
Is what we're trying to achieve possible with Cisco Prime LMS 4.2? We just want to be able to receive simple 'host unreachable' notifications for Microsoft servers, and the corresponding 'cleared' notifications once the server is back online.
I have an issue with my lms 4.2 installation.I have created a fault notication group which sends me an email when an alert is active on a device.Some of the devices are deleted from the inventory, but when I restart my deamon manager. I receive alerts for all the devices I have deleted in the past.I get this email in my inbox.When I check "Monitor - SNMP traps - fault notification group" I can't see any of the devices for which I receive the email alert?
EVENT ID = 00024PS TIME = Fri 01-Feb-2013 11:03:59 CET STATUS = Active SEVERITY = Critical MANAGED OBJECT = switch MANAGED OBJECT TYPE = Switches and Hubs
I have installed cisco lms4.1, seems to berest all working fine. But am not finding a option to enable email seetings options to send reports. I have already set smtp servers, through whihc threshold alerts are trigering, but am unavle get best practice reports. as per document, email setting option is available under Reports>reports settings. But I cant see email setting option under report setting, only 'set report path' is available.
I think I've done a wrong move and cancel my company e-mail address.I'm not familiar with this , but is it pssible to restore.??..and if so be as clear as possible for each step to do cause I'm not a computer wiz in that stuff.
I am having almost an Identical issue. It seems that I can do anything I want on the internet, but the second I open hotmail all the problems start. Issues occur on both FF and IE. As with you I am able to continue to get some information on sites that are currently open (for example I will get incoming IMs, although I cannot send replys, and my stream on facebook continues to update). Once this happens I cannot open any new webpage or use the wireless on ANY other device in my house (iphones and printer); wired devices seem to have no issues. I have done everything as far as resetting, updating firmware etc to my router with no luck. I have a netgear dual band router, computers with Windows 7 64bit. It seems that accessing Hotmail on the iphones does not trigger the same issue...
Someone tricked me by sending false email and gained control of my email address. I tried to log on and change my password but I cannot. How can I regain control. I am not experienced with computers. I would also like to learn more about computer basics to start.
I had the email host setup a test account for me to use. I have tried logging in to the email account on four different networks. On three of the four networks, I can successfully log in to webmail. On the fourth network, I cannot. Why would one network block access to this certain pop host? I am running an Apple Airport Extreme router, and I have not set it to close any ports--at least not knowingly . Need getting pop mail to work on a network?
