Cisco :: LMS 4.1 - Email Setting Option?
Nov 24, 2011
I have installed cisco lms4.1, seems to berest all working fine. But am not finding a option to enable email seetings options to send reports. I have already set smtp servers, through whihc threshold alerts are trigering, but am unavle get best practice reports. as per document, email setting option is available under Reports>reports settings. But I cant see email setting option under report setting, only 'set report path' is available.
View 1 Replies
ADVERTISEMENT
Dec 20, 2010
I have been trying to setup my DIR-655 A4 (Firmware 1.34NA) router to send me email notifications on new firmwares, when the log is full and every Saturday. So I have a schedule already created for sending the emails on Saturday and I also have the option to send notification of new firmware checked. Now I have settings, similar to the following, under email settings.
View 14 Replies
View Related
Feb 28, 2010
setting up the email notifications. I need the log emailed to me during a certain time of the day and it wont email anything. Even when I am in the log and push the email now, it does nothing. I've tried setting it up through hotmail, lmsn live, and gmail. None of them work. What am I doing wrong or what do I need to do?
View 9 Replies
View Related
Sep 5, 2011
I've recently purchased a domain name from GoDaddy, and I'm having trouble setting up my server, which is running Windows Server 2003, to run email using the domain name. Before purchasing, I was using a free domain from DynDNS and it worked using it as an domain address. I'm wondering if maybe I have to set up the DNS on GoDaddy to foward the email protocol to my server.
View 2 Replies
View Related
Aug 8, 2012
I have a question about NAT behavior on FWSM 4.0. The problem is email server (Company A) cannot connect to email gateway (Company B) on the outside network and it randomly happen. I got this error from server guy "Detail: xlate has blocked the connection between A’s mail gateway and B’s mail gateway". It work fine again after clear xlate on firewall. [code]
1. How FWSM create xlate table like that? I mean it look like NAT0 for 158.137.21.26 but it doesn't has any nat rule for 158.137.21.26 on firewall.
2. What does it mean "connections 24" at the first of line? In the normal time, I only see the connections is 0 like the second line of xlate
3. After clear xlate global 158.137.21.26, the first line of xlate table is gone then email server can connect each other. Does is a bug on FWSM? or This is a normal NAT behavior of FWSM.
View 1 Replies
View Related
Mar 21, 2011
I deleted an incoming email titled troy from my email inbox by mistake I need to recover this email as it came from my son in bali [URL] edited by moderator: Deleted Email address to prevent Spam
View 1 Replies
View Related
Mar 25, 2012
Any problem while using SFTP option in ACS5.3.I am trying ot use host-key sync command but giving below error.
ACS/admin(config-Repository)# host-key sync
% Error: First character must be a letter
% Error: Invalid ip address or hostnameSOK-S12-ACS-1/admin(config-Repository)# host-key sync% Error: First character must be a letter% Error: Invalid ip address or hostname
As per documentation this command needs to be added directly.
View 3 Replies
View Related
Jul 4, 2012
Does the two listed POE switch ports on the 880 series routers are active out of the box (default) or is configuration or extra parts required as internet pictures appear to show what looks like a power connector new to the POE ports?
View 8 Replies
View Related
Feb 7, 2012
In one of our regional office I want to terminate 2 Internet links on a single 2811 Router and use both the links as primary and backup to enable site to site VPN. This also gives redundancy option if primary link fails. The Router has total 3 FE ports.
Current setup is terminating one internet link only on the router and establish site to site VPN to our HQ
ISP_Router--------------ASA_Firewall---------------------L3_sw_3560--------------------users
View 1 Replies
View Related
May 8, 2011
I see the WS-SVC-AGM-1-K9 was EOL Jan 2010 ,What is the suggested Product Migration Option? Also if any is using this WS-SVC-AGM-1-K9 I would like some feedback ,Our problem is listed below and we are wondering of the WS-SVC-AGM-1-K9 will work ?
Looking at the best option to detect attempts at cracking our SIP servers. We see connections from scanners on the internet trying to brute force SIP passwords reasonably often, and would like to be alerted to them happening. Essentially we see hundreds of SIP registration attempts or Invites from the same IP, and this is how we know it is dodgy.
View 1 Replies
View Related
Jun 29, 2011
I have a lap top that someone else uses, is there anyway I can set some setting that erasing the history is not an opinion?
View 1 Replies
View Related
Apr 22, 2011
I can't have found toolbar option in my computer. How can I find tool bar option on my computer?
View 1 Replies
View Related
May 23, 2013
I have 2 Catalyst 3750-E and I have to make a uplink beetwen them with optic fiber but the uplink will be at 1GB not with 10GB but the default port speed is 10GB on the optional module.I have a CVR-X2-SFP but I don´t know the cli command to convert the Te3/0/1 and Te3/0/2 on Gigabit Interfaces for SFP, what is the command?
View 1 Replies
View Related
Jul 16, 2012
Im trying to find an affordable Cisco switch with similar capabilities and features as the WS-C3560X-48T-S (L2/L3 routing as in IP Base, dual power supply, etc.).
View 2 Replies
View Related
May 8, 2011
I see the WS-SVC-AGM-1-K9 was EOL Jan 2010,What is the suggested Product Migration Option? Our problem is listed below and we are wondering of the WS-SVC-AGM-1-K9 will work ?,Looking at the best option to detect attempts at cracking our SIP servers. We see connections from scanners on the internet trying to brute force SIP passwords reasonably often, and would like to be alerted to them happening. Essentially we see hundreds of SIP registration attempts or Invites from the same IP, and this is how we know it is dodgy. If the Anomaly Detector can alert us to this type of traffic, it will be much easier to stop them quickly.
View 1 Replies
View Related
Nov 14, 2011
We have Cisco 6509 switch, in which DHCP is enabled and now we have WDS(Windows Deployment server) that needs option 60 to be enabled on DHCP scope for deplyoing OS remotley to PC's. Where to get sample configuration to enable the option 60.
View 1 Replies
View Related
Apr 17, 2013
I upgraded the firmware to latest and apparently i've lost couple of options inlcuding TCP Dump in diagnostic as well as I cannot find how to disable/enable an ethernet port.
View 5 Replies
View Related
Aug 1, 2011
Does there are plans to include support AES256-CTR (vice AES256-CBC) in IOS code?
View 2 Replies
View Related
Feb 12, 2013
ragarding AP AIR-CAP3502I cannot learn option 43 from MS server but it can learn the DHCP ip address. We have 2 sites that option 43 does not learned by new AP's but other site works ok. I tried also to delete and add the dhcp scope and same issue. My temporary solution will be creating the DHCP pool with option 43 and 60 in the access switch and it work ok, new AP's able to show in the WLC. I just need more information why site AP's cannot learn the option 43 of the MS server but other site AP's work ok. Is this IOS bug? AP's issue? MS issue?
View 6 Replies
View Related
Aug 4, 2012
i m configuring a 887 router for ssl vpn. The goal is to configure full tunnel mode, so the client connect to the webpage generated by the router, it logs in, it has the "application svc" window where you can download the client and connect. Problem is everything is working except for the fact that the window with the ssl application doesn show up at all and so clients can't download the client and connect.
this is the relevant part of the configuration:
ip local pool sslvpnpool xxxxx xxxxxx
ip http server
ip http authentication local
[Code]....
View 3 Replies
View Related
Nov 5, 2011
just got new hardware and decided to try the newer USB port for IOS upgrades. I could not get the switch to recognize my 2gig flash drive. Do I need a proprietary stick or special format?
I also noticed when I removed it the switches crash dump and rebooted?
View 12 Replies
View Related
Jan 14, 2012
I have sf300, i didn't found the option to telnet it. default IP of the switch is 192.168.1.254, i can access it by HTTP.
also i'm not able to attach IP phone on voice vlan & computer on vlan 1 ,please share the step by step guide how to access the switch by telnet.
& how to make voice vlan 2 for IP Phones & Vlan 1 for PC.
View 3 Replies
View Related
Dec 29, 2011
I just purchase the Cisco Router RVS4000 vpn and I am having problem configuring the VPN option. I just try all way I could imaging, but somehow something are missing and I don't know what it is. Here are a image of my current configuration.
No matter the change on my configuration, the status always in down.
View 1 Replies
View Related
Oct 10, 2011
I can't access the internet through my home pc. I can't setup a new connection because I'm missing the network icon. It was fine a few days ago but somehow somewhere I've lost the icon. I have tried to restore but couldn't bo back that far.
View 1 Replies
View Related
Jan 27, 2011
I was using my little PC laptop and it fell, and suddenly the internet doesn't work.It doesn't show me any wireless option at all (in bottom right corner. or in control panel)and in "Network Connections"there isn't the wireless option as there used to be.Now it only has 'LAN or high speed internet"I've tried looking at old threads but haven't found anything suited.Is there a way to reactivate? I've tried everything I can think of! (laptop has no CD drive)
View 2 Replies
View Related
Aug 14, 2011
I have an adsl router and windows 7 ultimate. The connction status sometimes show's limited connectivity when I click on disconnect and connect again it prompts for troubleshoot connectivity problem, on clicking this it runs a few checks and brings up a window saying connectivity has been fixed and then my internet work's fine. This problem sometimes does not occur all the time. Sometimes after i switch on the router and then the wifi switch it connects just fine.
View 1 Replies
View Related
Sep 2, 2011
I just spilled water on my companies Dell Latitude D630 and it didn't start. On the D630 I signed onto a domain. When I put the hard drive from the D630 to a Dell D620 the domain option is grayed out. The only option is to log onto locally. Is there anywhere to get the domain option back?
View 8 Replies
View Related
Mar 4, 2013
I'm looking to replace my Thomson router with a router capable of being programmed so it can turn wireless off at a certain time.
View 8 Replies
View Related
Apr 18, 2011
I have an old computer (xp circa 2005) and I would like to connect to my n router wich is using wpa2. The old computer doesn't seem to have wpa2 as an option, is there anything I can do?
View 1 Replies
View Related
Mar 11, 2011
My D-Link DIR-628 is at the far end of my house (next to my desktop and cable modem) and my PS3 and laptop are at the other end of the house in my living room. I'm not sure what's in my walls but it is NOT WiFi friendly!
[code]....
So I was thinking about buying a cheap N router and flashing it with DD-WRT and putting it in the living room.
I'd like this 2nd router to:
(a) Plug into the PS3 thereby "upgrading" it's crappy wireless card to something faster
(b) Have it act as a WiFi repeater to boost coverage on the far side of the house.
So is this going to work the way I'm describing it here? That's my current understanding based on what I've read, but I want to make sure I'm not missing something before I order the hardware.
View 1 Replies
View Related
Apr 16, 2013
I had purchased Dell Studio 15 in 2009-2010 and before few days back i had formatted my system and installed Windows 7 ultimate SP1. Now i am not able to get the option of Bluetooth. i am sure the issue is with driver of it. Some way to reinstall the driver or make it working properly.
View 2 Replies
View Related
Dec 10, 2012
I am trying to configure Cisco SG300-52 switch for the first time and stuck without CLI configuration option. The configuration can be done using GUI, however, configuring using CLI would be more comfortable (as I am used to work with CLI of other Cisco switches)..
I was able to lo gin to switch using SSH, but the CLI appears in MENU format and was not able to find any way to go to CLI mode.
As per some blogs, in SG300 switches CLI mode can be accessed using Ctrl + Z in Menu, which did not work either in my case.
Switch is running with latest firmware version Sx300 Firmware Version 1.2.7.76.
View 2 Replies
View Related
Mar 28, 2011
Our campus using WisM (WS-SVC-WISM-1-K9) as wireless controller , Cisco 1130 access point and Cisco Secure ACS 4.2 Solution Engine 1113 Appliance as radius server. For username and password, ACS will export the data from Oracle database (production DB). The problem that we are facing right now is password that store in oracle database is in encrypted format. Base feedback from our database administrator, the encryption is done by oracle - application layer and cannot be decrypt back. In Oracle they call it "Oracle Stored Procedures"
My questions :
1- Can Cisco Secure ACS 4.2 work with Oracle 10G or 11G?
2- Is there any option to tackle the encrypted password? Can ACS handle the "Oracle Stored Procedures" function?
View 2 Replies
View Related
