D-Link DIR-615 :: Setting Up Email Notifications

Feb 28, 2010

setting up the email notifications. I need the log emailed to me during a certain time of the day and it wont email anything. Even when I am in the log and push the email now, it does nothing. I've tried setting it up through hotmail, lmsn live, and gmail. None of them work. What am I doing wrong or what do I need to do?

View 9 Replies


D-Link DIR-655 :: Setting Up Email Notifications

Dec 20, 2010

I have been trying to setup my DIR-655 A4 (Firmware 1.34NA) router to send me email notifications on new firmwares, when the log is full and every Saturday. So I have a schedule already created for sending the emails on Saturday and I also have the option to send notification of new firmware checked. Now I have settings, similar to the following, under email settings.

View 14 Replies View Related

D-Link DIR-655 :: Email Notifications When ISP Requires SSL / TLS Port 465?

Feb 22, 2010

DIR-655(A3) 1.33NAb02_HNAP_beta  I used to be able to send notifications on log full etc...  When my ISP was still allowing outbound email w/opt out of block on port 25. This worked on my old DI-524, and used to work on my DIR-655.In an effort to clamp down on spam my ISP formerly SBC now AT&T began requiring SSL. Secure Authentication is not required. With the ever increasing concern for controlling spam DLink really needs to get in gear and provide the support customers need and back the efforts of ISP's to control spam. Otherwise it's wasted code occupying space. On that note if space is a concern, need space for the code ~ throw SecureSpot out  !


On the Outgoing Server (SMTP) Settings window click Edit and verify:

# Server Name - displays smtp.att.yahoo.com.
# Port - displays 465.

Note:  When updating the secure server settings, check SSL checkbox first to update the port setting.

* Under Outgoing mail (SMTP),  the box next to server requires a secure connection (SSL) is checked.  This works flawlessly with Thunderbird and other mail clients therefore it is clearly a shortcoming of the firmware on the DIR-655 i.e. no SSL? This is totally inadequate.

View 5 Replies View Related

Cisco :: DFM 3.2 Email Notifications Have Stopped

May 12, 2013

We're running LMS 3.2 with DFM 3.2, and at some point within the last month, email notifications from DFM have stopped flowing.  DFM is trapping events as they occur and these are viewable through the portal, but notifications that should be going out as email and SMS messages have stopped.
Backups going back beyond when this is believed to have stopped working are available if something needs to be restored.  If that's the direction I need to go, how do I restore just the DFM portion of the database?  If backup restore is not the way to proceed, what other advice can be provided.

View 1 Replies View Related

Cisco :: 2504 - Email Notifications / Alerts From Controller

Jul 22, 2012

Can I configure the 2504 to send email notifications for particular alerts? how?

View 2 Replies View Related

Cisco Routers :: How To Setup SRP527W To Send Email Notifications

Sep 15, 2011

Where/how do we setup an SRP527W to send email notifications? Can't seem to locate the setting when logged in as admin.

View 1 Replies View Related

Cisco WAN :: 4507R - Can Email Notifications Be Configured In Case Of Network

Nov 1, 2011

I have a 4507R that will be using track and sla for failover/failback on two WAN circuits going out of my switch. Is there a way to configure an email notification, or some other sort of notification to let me know which route is being used, especially when the failover kicks over to by backup route.

View 2 Replies View Related

Cisco :: Way To Configure 5508 To Send Email Notifications When AP Drops Offline

Jul 19, 2011

I have 2 Cisco 5508 Wireless LAN Controllers.They are NOT connected to a WCS.Is there a way to configure the 5508's to send email notifications when an AP drops off line?Is not is this functionality available with either a WCS or new NCS?

View 1 Replies View Related

Cisco :: LMS 4.1 - Email Setting Option?

Nov 24, 2011

I have installed cisco lms4.1, seems to berest all working fine. But am not finding a option to enable email seetings options to send reports. I have already set smtp servers, through whihc threshold alerts are trigering, but am unavle get best practice reports. as per document, email setting option is available under Reports>reports settings. But I cant see email setting option under report setting, only 'set report path' is available.

View 1 Replies View Related

Setting Up Email Server Using Personal Domain Name?

Sep 5, 2011

I've recently purchased a domain name from GoDaddy, and I'm having trouble setting up my server, which is running Windows Server 2003, to run email using the domain name. Before purchasing, I was using a free domain from DynDNS and it worked using it as an domain address. I'm wondering if maybe I have to set up the DNS on GoDaddy to foward the email protocol to my server.

View 2 Replies View Related

Cisco Firewall :: FWSM 4.0 Email Server Cannot Connect To Email Gateway

Aug 8, 2012

I have a question about NAT behavior on FWSM 4.0. The problem is email server (Company A) cannot connect to email gateway (Company B) on the outside network and it randomly happen. I got this error from server guy "Detail: xlate has blocked the connection between A’s mail gateway and B’s mail gateway". It work fine again after clear xlate on firewall. [code]
1. How FWSM create xlate table like that? I mean it look like NAT0 for but it doesn't has any nat rule for on firewall.
2. What does it mean "connections 24" at the first of line? In the normal time, I only see the connections is 0 like the second line of xlate
3. After clear xlate global, the first line of xlate table is gone then email server can connect each other. Does is a bug on FWSM? or This is a normal NAT behavior of FWSM.

View 1 Replies View Related

D-Link DIR-655 :: Didn't Get Any Email

May 28, 2011

I have recently purchased six quantities of DIR-655 for my home use. When I registered them these six product, at the end of each registration, I got the message that I will get an email confirming the registration.I didn't get any email. I have checked my email span box and filter too.

View 6 Replies View Related

D-Link DIR-655 :: Email Being Intercepted?

May 11, 2011

I run a mailserver behind my router. I have port 25 forwarded as a virtual server. Not always, but often enough to be annoying, the connections show as being from the WAN port on the router instead of from the real origin. Is there any way to stop the DIR-655 from doing this?

View 12 Replies View Related

Wireless :: Deleted Item Email Troy From Incoming Email?

Mar 21, 2011

I deleted an incoming email titled troy from my email inbox by mistake I need to recover this email as it came from my son in bali [URL] edited by moderator: Deleted Email address to prevent Spam

View 1 Replies View Related

D-Link DIR-655 :: Can't Get Email To Work From Router

Feb 18, 2011

I can't get the email to work from the router.  It worked flawlessly for weeks then stopped working. I verified that the outgoing settings are still valid and that my antivirus is not blocking the email.

View 7 Replies View Related

D-Link DIR-655 :: Email Server Inaccessible Via WAN?

Jun 3, 2012

Up to this point, all the computers on the network accessed the e-mail server via the Windows name of the PC running the e-mail server.  However, one of the PCs will need to access e-mail from the WAN soon as opposed to the LAN, so I switched the server name in Thunderbird (e-mail client) to the actually fully qualified domain name of the server (registered at NO-IP, which redirects to the e-mail server at home).

The problem I am running into is that all the requests sent for IMAP or SMTP are being blocked by the router.  That's even though I added port forwarding rules for them.  The logs show messages similar to the following:

"Blocked incoming TCP connection request from to"

It doesn't make a difference if I change the endpoint filtering to "Endpoint Independent" either.  Any thoughts of what else I can try?  DMZ is not an option.

View 2 Replies View Related

D-Link DIR-655 :: Email Logs Not Working

Feb 8, 2011

Any way to get the DIR-655 to e-mail logs?  I have all the e-mail settings set properly, but when I request the logs to be e-mailed, I never get anything.  Its not in a spam folder either.I do have the DIR-655 behind a 2wire router/DSL modem.  I don't know if this is the problem, but I can send and receive e-mails from my computer which is connected to the DIR-655, so I don't think that is the problem.

View 6 Replies View Related

D-Link DCS-930L :: Cannot Set Up Motion Detection Via Email

May 31, 2012

 I've just successfully set up my network camera and as I was running through the advanced settings, what it wants from me when it comes to setting up images being sent to my e-mail. I've looked up some old threads to get a clue and thus far nothing works. Testing my entries results in "Invalid e-mail setting" 10 out of 10 times.

The setting format I'm trying to use is as follows:

-- smtp.gmail.com
-- 587
-- myemail@gmail.com
-- myemail@gmail.com
-- myemail
-- mypassword

My GMail account is POP Enabled (whatever that is) and I used the username for that e-mail for bother the Sender and Receiver fields, as well as that e-mails username and password.

I'm lost. I bought the camera so I could document my landlord's maintenance people "touring" my apartment while I'm at work, but I wasn't aware having it save screenshots would be so complicated.

View 2 Replies View Related

D-Link DIR-615 :: Sending Logs Via Email Using Schedule

Feb 21, 2012

DIR-615, HW rev. H1, FW v8.02

As the subject says... Sending logs using "On schedule" option doesn't work. I have my own personal email server I used to test this. When the router time reaches the defined "Start time" nothing happens. I tried both time formats (12h, 24h). The router does NOT initialize the process of sending the email. I see that in my server mail logs. If sent manually from Status -> Logs -> Email now, it works. If sent using "On Log Full" option, also works.

View 6 Replies View Related

D-Link DIR-655 :: Does Not Accept Any Email Address That Start With Number

May 29, 2011

Router does not accept any email address that start with a number. For example, if you want to set email address 1abcd@efg.com in the from field you will receive the following error: The given FROM address (1abcd@efg.com) is invalid. Same error if you use it in the to field.HW ver. A4 running firmware 1.35NA.

View 5 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1042ND Won't Send Out Email

Jan 24, 2013

Region : Canada
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3.12.22 Build 120424 Rel.39632n

I have a WR842ND with firmware 3.12.22 Build 120424 Rel.39632n. I can't seem to get the mail log emailed out. I've tried hotmail, gmail and ISP email ids. I know these will work as I've done it with my NAS and other routers. When I'm in the System Tools/System Logs/Mail Settings I have authentication enabled and I know I've put in the proper information including mail server outgoing mail names EG. smtp.live.com for hotmail.

I don't see any place to identify a non standard port IE. not port 25, to use. So when I try to send I get the Userid or password is wrong message. Do I have to configure something else.

View 5 Replies View Related

D-Link DIR-825 :: Can't Receive Email Through Windows Live Mail

Aug 9, 2011

I cant receive my email through windows live mail since i goit my router (i just got this problem with my hotmail account tho gmail work properly)

View 11 Replies View Related

TP-Link 3G/3.75G Router :: New Email Account Not Working Through TL-MR3420?

Nov 19, 2012

Region : Argentina
Model : TL-MR3220
Hardware Version : V1
Firmware Version :

Region : Sweden
Model : TL-MR3420
Hardware Version : V1
Firmware Version : 3.12.21 Build 120523 Rel.37880n
ISP : www.ownit.se

I recently got a new email provider with a webmail. But I can not access the email from my home network. I have tried both my computers so I suspect that it can have something to do with my router. I have also set up the new email account in Outlook and in other networks it works fine, also the webaccess works fine in other networks. It seems that the problem is only related to my home network.i have talked to my ISP provider and they say that all is opened in there network. i have tried to clone the MAC address and that did not solve my problem. I also read the one could change the MTU size from default 1500 to 1440, that did not work either.

View 2 Replies View Related

Blank Page Appears When Click Link In Email - 404 Not Found?

Jun 14, 2012

When a friend sends me an email with a link to click on when I click on ther link a blank page pops up with the words "404 not found". Why does this happen and is it a big problem. This problem just started to happen a few weeks ago. I never had a problem whenever a friend sent me an email with a link to click on.

View 6 Replies View Related

D-Link DCS-942L :: Change Subject Line Of Email Alerts That Are Sent?

Feb 8, 2012

Is there any way to change the subject line of the email alerts that are sent?  Right now mine are coming with the MAC address, date and time.  I would like to remove the MAC address and date and time so that I can sort them into one folder when I sort my email by subject.

View 7 Replies View Related

D-Link DIR-615 :: Laptop Setup To Connect To Exchange Server For Email

Apr 12, 2009

I'm hosting my email on an Exchange Server 2003 box and have my laptop (Vista Ultimate 32 bit) setup to connect to the exchange server for my email. This works fine through a LinkSys RV042 in one location and a LinkSys WRT54GC in another, but fails through the DIR-615 B2 (2.24 firmware) at home. I'm guessing it's blocking something needed for the MAPI connection.

View 2 Replies View Related

D-Link DCS-930L :: Motion Detection With Email Doesn't Work

Dec 4, 2011

I recently set up two cameras. I had set up one for motion detection and email to a gmail account. It seemed to work fine, but then for some reason the motion detection tab didn't show the room like it did before. It doesn't show any picture or anything like it did before, so I couldn't choose the squares to choose the detection area. This is through mydlink account->camera info->advanced settings, and logging in to the camera remotely.So I switched to the other camera, and got it working as of last week. But now, the motion detection doesn't work anymore? It appears to be related to the username/password for the email account. I can no longer send test emails, it says invalid username/password, though the exact same values worked last week, and I didn't change anything. I tried resetting it, then setting it again, but no luck.

View 5 Replies View Related

Cisco :: Disabling Certain Notifications In LMS 4.0?

Apr 27, 2011

Am running LMS 4.0 on windows 2003 server, i would like to disable or remove notifications with the EventName 'ExceededMaximumUptime' and 'BackupActivated' on the device fault summary view. How do i achieve this? This will be useful in only monitoring fewer notifications.

View 3 Replies View Related

D-Link DCS-942L :: How To Setup Receiving Email Snapshots And Video Clips

Aug 19, 2012

the 942L is up and running but I ain't getting no email snapshots nor video clips.I think the menu for setting up the "Video Clip" and "Snapshot" is severely lacking info for users like myself; what to type in the smtp field, the sender or recipient email fields, and especially not username and password. Do I put my email username and password there, or my MyDlink login email and password?

View 1 Replies View Related

D-Link DCS-942L :: Not Trigger Motion When Configured To Send Snapshots Over Email

Nov 9, 2011

On my new 942l, after 5 days of usage and tinkering with various settings, I cannot get the camera to obey the trigger=motion when configured to send snapshots over email. It does work when configured to send snapshots over email with trigger=always.Interesting enough the trigger=motion works just fine to upload snapshots to FTP. Yes, it uploads the pictures correcty on FTP detecting correctly movements, but it would not send those over email. To me it looks like a bug in the firmware that I have now a 100% repro.Are there any logs you want me to send to you for debugging?And : Is there a known workaround I can apply (reboot, resetup etc)?

Detailed description of the problem:I have setup the camera to upload snapshots to FTP AND send them over email for trigger=motion.This is what works : the snapshots are nicely uploaded on FTP , but not sent over email.Interesting : if I set trigger=always, snapshots will both be uploaded to FTP and sent over email. The moment I switch back to trigger=motion they go only to FTP and not over email.Even more interesting : the video clips work correctly with either email or FTP for trigger=motion.

What could cause this?The email (account, port, password) and FTP settings are definitely not a problem since I see pictures/videos in email or FTP with trigger=always.The motion settings are not a problem either since snapshots upload correctly on FTP when movements are detected.What it apears to be is the software is not reading or obeying correctly a certain combination of settings.I'm wondering if it has to do with the fact that for video clips the "email" and "ftp" are exclusive, but for snapshots they are allowed simultaneously. And somehow the logics get mixed up causing certain combinations of settings to now act out?

What else I tried?I tried many reboots, unplug followed by plug back in and so on.I tried saving and restoring the settings to/from a file hoping that will "reset" something.And I tried many combinations of settings, including changing the order I set and unset hoping a different code path that works will be hit.I did not try a restore to factory defaults since I installed the camera in a hard to reach place and if I restore to factory defaults i need to take it down connect it to a cable in order to redo the wifi settings.

View 7 Replies View Related

Cisco :: Does Prime Infrastructure 1.2 Have Sound Notifications

Mar 16, 2013

It has email and alarm notifications. But what about sound notification through PC speaker?

View 1 Replies View Related

D-Link DCS Network Camera :: 2130 Doesn't Send Notification Email On Motion Detection

Jun 2, 2012

Motion detection is setup - and I can see in the log and on the Live Video "Motion Trigger Indicator" that this part is working. I can also send test-emails, so the smtp is set up correct. In the Event Setup I have a valid server and a motion triggered event with the status ON. But no emails are sent . In the log there is also no indication of the server trying. Am I missing something - or is this not working for anybody?

And - there is no firmware beyond 1.0 for this model as far as I can see.

P.S. I am using a Gmail account for smtp, port 587 and using startTLS to send with,

View 1 Replies View Related

Cisco :: 2800 Router - Voice Gateway DFM Notifications

Jun 20, 2011

We have a 2800 router which is configured as a Voice Gateway. For some reason, yesterday we started getting DFM notifications like the one below. We seems to get an active messages every few 10mins or so, then a few minutes later the message will clear before becoming active again...
EVENT ID                = 0009NK2
ALERT ID                = 0000QTM
TIME                    = Tue 21-Jun-2011 16:06:50 BST
STATUS                  = Active
SEVERITY                = Critical

View 1 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved