Cisco :: Edit SSID Password On 5508 Controller
Oct 3, 2012Been a while since I have conf'd a controller. I believe its WLAN/edit/security/layer2 and below psk format edit the password?
View 2 Replies
ADVERTISEMENT
Cisco Wireless :: 5508 - Same SSID With Different Dhcp Scope On Same Controller
Aug 10, 2011I have a 5508 WLC controller at the HQ with the employee ssid ,the dhcp scope on the ssid is 10.120.0.0/16 network.
However,I want this same ssid to be brodcasted to a remote site using HREAP access point but with different dhcp scope 10.102.0.0/16.
I have tried creating another interface for the remote site with a different dhcp scope(10.102.0.0) but the controller wont allow me create another wlan with same ssid that existed before to apply the new interface created for.
Cisco Wireless :: 5508 Second Guest SSID On Controller Not Giving DHCP Out
Feb 28, 2013i have two 5508 ver 7.3.0, one is the primary and one is the guest controller. mobility is up and running. i have an exising guest ssid working with wpa2-psk and web authentication and its working fine but i require a second guest ssid that only uses a wpa2-psk for ipod/ipads as i cant use passive client on primary controller. i presently have the one vlan range and dhcp setup on the guest controller to give addressing to either ssid. i know you can have multiple ssid setup on the guest controller but in other sites i have only had one guest connection comming from the primary controller, just a primary controller on each sites was only creating one link to the same guest controler.
View 3 Replies View RelatedCisco Wireless :: 4404 Guest Anchor Controller With 5508 Foreign Controller?
Aug 12, 2012I know that the 3600 series APs are not supported on the 4404 WLC. However, would the following scenario be supported? I would like to use the 4404 (software rel. 7.0) as a guest anchor with a 5508 (software release 7.2) as the foreign controller supporting series 3600 APs. I ask because the APs do not need to join the guest anchor.
View 7 Replies View RelatedCisco Wireless :: 5508 Foreign Controller And 4400 Anchor Controller?
Jun 2, 2013We have a customer that have 2 5508 as primary and backup controller and a 4400 as an anchor controller. We plan to upgrade the 5508 to 7.3.112.0 and the 4400 is already 7.0.116.0. Will there be any issue if the anchor controller is not the same code as the foreign controller? Do I also have to upgrade the acnhor controller to 7.0.240.0?
View 2 Replies View RelatedCisco Wireless :: 5508 Assign Single Ssid To Multiple Interface Groups By Assigning Ssid To Multiple AP Groups
Aug 26, 2012Is it possible to assign a single ssid to multiple interface groups by assigning the ssid to multiple AP groups?
I have buildings geographically dispersed that are configured with multiple vlans in interface groups so that I can maintain an addressing scheme of dhcp assigned addresses per building. Each building is also further grouped as AP groups. I'd like to know if by assigning the same wlan ssid to each of the AP groups, will I maintain addressing integrity for each building? I'm thinking it will work.
Do the buildings have to be outside AP range of each other to avoid problems?
5508 controller
7.2.110.0 code
6 buildings
6 interface groups
1 ssid
Cisco Wireless :: Switching Between SSID Within Wi-Fi Controller AIR-CT2504?
Sep 6, 2012I configured a 2504 controller with two LWAPP Access Points, and I'm using two SSID's on the same controller, the problem is when the user tries to switch between SSID's he gets an error message saying that the other network is unavailable but if he disconnects from the first network and then connects to the other it works fine !.
View 5 Replies View RelatedCisco Wireless :: 1250 AP - How Many SSID Can Be Created In 4404 Controller
Jul 7, 2011How many SSID can be create in a 4404 controller and also in standalone 1250 AP? How many VLANs can be created in eac one?
View 2 Replies View RelatedCisco Wireless :: 7500 Controller - Maximum Number Of SSID
Apr 15, 2012Is there a limit to the number of ssid's that can be supported in h-reap mode? I need to deploy at least 4 but the documentation does not necessarily say. I'm deploying these ssid's on a 7500 controller.
View 1 Replies View RelatedCisco Wireless :: 5508 Roaming From AP On Same SSID
Feb 12, 2013I have an issue where I have an AP in one room and another in another.When I walk from one room to the other, I lose signal but manages to see the SSID and join.But, I cannot seem to surf the Internet, I have to manually disconnect and reconnect. Normal wireless routers I reconnect seamlessly without any manual disconnect & reconnect.Currently using cisco 5508 and ap2600.
View 8 Replies View RelatedCisco Wireless :: 5508 / How To Map Two Different Subnets To One SSID
Dec 12, 2012we have two offices in same city at different location however we are planning to bring both the office at same location.Now lets say site A has controller 5508 configured with 24 AP's with 10.10.10.x subnet for internal SSID and Site B which is shifting to Site A campus has different subnet ( 10.10.20.x ) for same SSID.Site B has no controller since they had connection with H-reap and they were using different subnet for internal SSID ( 10.10.20.x ) .....Now i need to add their AP's in Site A controller which will be extended wireless LAN however we would like to keep same subnet ( 10.10.20.x ) what Site B has for wireless clients which is really confusing me ....I have already client subnet for site A with 10.10.10.x /24 subnet and nearly 200 users are already using this wireless client subnet.... How do i add their ( Site B ) subnet / 10.10.20.x with same SSID configured which is globally only one SSID ?
limitations :I can not create new SSID for site B since same will be broadcasting even in Site A AP's ?Is this possible to map one more subnet of site B to existing SSID with already different subnet ( 10.10.10.x ) ?
Cisco :: 5508 / C6509 - Using WLC For DHCP For One SSID?
May 17, 2011We have a network of multiple WLCs: 5508, 4402, WISMs in two C6509 all running version 7 software. We have about a dozen SSIDs and we need to provide DHCP to the one public SSID (which like the other SSIDs span across all controllers) and to do so we thought of using a spare router, Linux workstation or DHCP server on the controllers. We are not sure if using the controllers is an option since we have multiple controllers. Is there a way to setup DHCP on a WLC and tell the others to use that WLC for DHCP for the one SSID?
View 3 Replies View RelatedCisco Wireless :: WLC 5508 Cannot Change SSID
Dec 6, 2012I have an issue where I cannot get clients to change SSID. I have two SSID, one WPA2 secure, one open guest. The secure is locally switched via Flexconnect and the guest is centrally switched. Both of them work. I have been able to test this and both work as intended. The problem is that once you connect to one of them, either secure or guest, you cannot then change to the other. The only way to change is to delete the dhcp entry from the scope and then do it.
Fast SSID change is enabled. I also have debug client output from when the client fails when you try to switch which I will include below. I also pulled some wireshark captures and those show me that the DHCP ack packets are trying to give the client the ip address from the incorrect/previous scope. So basically it's like FAST SSID change is not working and the client is never being disassociated properly??
I am totally stumped and even though the client will most likely not be switched between SSID that often I would still like to know the solution.
Cisco 5508 running 7.2.110.0
Cisco 3502 LWAPP
windows server 2008 dhcp server
[Code].....
Cisco Wireless :: Configure Multiple SSID On Aironet 3600i AP Via 2504 Controller
Apr 3, 2012Can I configure Multiple SSID (Guest/Corporative) on Cisco Aironet 3600i AP via Cisco 2504 Wireless controller?
View 1 Replies View RelatedCisco Wireless :: SSID / VLANs For Guest / Staff With 3600 And 2504 Controller?
May 2, 2012We are deploying 3600 AP's with a 2504 and would like to create multiple SSID's that are mapped to unique VLANs so we can control the traffic at the Firewall. We have the 2504 up and running with AP's but there appears to be no where in the 2504 controller Web GUI to configure a VLAN mapping to an SSID. Any pointers to documentation on how to configure?
View 1 Replies View RelatedCisco Wireless :: WLC 5508 - Second DHCP Server For Second SSID?
Apr 22, 2012I have Internal DHCP Server configured on the Cisco WLC 5508 and all is working fine. DHCP Range is 192.168.1.100 to 192.168.1.245. Now I created another SSID but I want clients connecting to this SSID get specific IP's or from a specific range. WLC has no option to bind a DHCP pool to a specific IP so what I did I checked the option to "Override DHCP" and added the IP of my firewall WLC is connected to and setup a DHCP Pool on that firewall as 192.168.1.89 to 192.168.1.94 (192.168.1.88/29).
Client can connect to the second SSID but can't grab and IP address, what am I missing ?
Cisco Wireless :: 5508 Single SSID / Two ACLs
Jul 16, 2012I am setting up a Cisco 5508 wireless controller and was looking for some feedback or assistance. Basically I already have my guest SSID configured and functioning. Created an interface group containing my vlans and applied the created ACL "Guest Policy - internet only", which is also working.I want to setup a second SSID called "staffstudent" and use RADIUS for authentication. I have already created two separate network policies on the radius server: staff and student. Each only allows certain user groups. I want to be able to differentiate on the controller side which profile they are logging in on and then apply the correct ACL. I have two currently configured: one for staff and one for student. It appears to me that since you have to apply the ACL at the interface level I cannot use both since my interface is accepting both staff and students. Is there a way I can filter them using RADIUS so that when they login RADIUS can return a "student" value and then apply the correct ACL? Same for staff?
View 2 Replies View RelatedCisco Wireless :: WLC 5508 Multicast Between SSID's And Vlan's
Dec 12, 2012is it possible to multicast between 2 different SSID's that are associated to 2 different VLAN's?
View 2 Replies View RelatedCisco Wireless :: 5508 Best SSID Practices For Really Old Devices On WEP
Jul 26, 2012setup a WEP SSID on my 5508 controllers. THat being said, I have multiple sites with extremely old scan guns that only do 104bit wep. I plan on locally switching this SSID and using static WEP 104bit key with MAC authentication, and then ACLing to limit my inherent security issues/exposure once someone compromises my WEP key. [code]
View 4 Replies View RelatedCisco Wireless :: 5508 - Internal DHCP / Two SSID?
Jun 28, 2012We created the management interface, an internal DHCP scope in same subnet, and Two SSID tied to the same management interface:
- when we connect to the first SSID we have and IP address
- but when we connect to the secone SSID: impossible to get an ip address - auth and association are OK
Cisco :: 5508 - Block Inter SSID Communication
Oct 25, 2012I have a wireless network with LWAPPs and 1 WLC 5508. How to block communication between SSIDs (clients in different SSIDs bassically) and whether that is even possible from the controller? I'd like to mention that communication between clients whithin the same SSID is already blocked.
View 4 Replies View RelatedCisco Wireless :: WLC 5508-7.0.116 / Multiple SSID To 1 WLan
Sep 26, 2012On a wlc 5508-7.0.116, can I set up 2 ssids that map to one wlan/vlan/subnet. I thought you could but I don't have the means to test without breaking production.
My goal is this:
Ssid red open
Ssid blue wpa 2
But all clients on the same ip subnet
Cisco Wireless :: 5508-HA / SSID Not Broadcasting After Reload
Jan 28, 2013I have Build a 5508-HA Cluster (7.4.100.0) , hat to reboot this cluster due to Licens install.After the reboot atleast one of the SSIDs was not broadcasting anymore, even the checkbox was checked.
What did I do:
Installed the Licenses @ Freiday 12:00
@17:15 reload active WLC, wait till controller is up again (a few minutes pingable)
@17:25 force failover to first controller.
check a few SSIDs but not all, those who where check are ok.
@monday 07:00 clients complaining not seeing the SSID (some where connected)
Cisco Wireless :: 5508 - SSID For IPad / IPhone
Jul 27, 2012on a 5508 WLC can we create new SSID for I PAD / IPHONE Users without having ISE, only I phone / I PAD are allowed to be authenticated rest all should be denied. IS this possible?
View 8 Replies View RelatedCisco Wireless :: 3502 - WLC User Rate Limit On Guest SSID Anchor Controller
Jul 30, 2012We have been deploying 3502 APs remotely to locations with full T1s that backhaul to where I sit at HQ. Both the foreign and anchor controller are here at my location.
I am seeking to rate limit per user the bandwidth each client will get on the guest internet ssid. As you know this traffic is encapsulated in capwap between the AP and the controller so I cant use a standard ACL on the switch or router.
We are trying to keep the guest internet access usage in check on the T1 at any given site so the other ssid's & local lan traffic is not overly competing for the bandwidth.
I found the place to edit the default profiles in the controller but the documentation really isnt clear on best practices.
So I put it to you my fellow wireless engineers to suggest how you are implementing bandwidth management on your wireless guest internet.
Oh and here is my hardware & software levels.
5508wlc - forgeign
4402wlc - anchor
Software Version7.0.230.0
Cisco :: 5508 How To Grant Wire Access To A Wireless Ssid
Jul 25, 2011I have a wireless lan controller (5508) broadcasting 2 SSID's, once is a secure vlan grabbing an ip address from a local dhcp server and getting access to the internal network, and the other ssid is for a guest vlan where the dhcp server is in a remote site and internet access is off a circuit in our data center which is accessed over a wan. The secure ssid's vlan is defined on the local switch, but the guest vlan is not defined on the local switch.the ap's in the respective sites are trunked to the core switch and the switchport config is : [code] it's trunked b/c we have both vlans going across this physical connection.I would like get the guest vlan a wired connection, ie. off a switchhub, but not sure how to do that as this guest vlan is not defined on our local network.
View 1 Replies View RelatedCisco Wireless :: 5508 - Any Simple Way To Do URL Redirect On Open SSID
Sep 4, 2012I have an open SSID on 5508 controllers - configured as anchors and need to redirect wireless clients to the wireless help page automatically once they have connected and opened their browser.I've read all through the web auth and pass through discussions on here but nothing seems to be quiet right for me - unless I am completely missing something.
View 5 Replies View RelatedCisco Wireless :: WLC-5508 Authorization Failed To Create SSID
Nov 17, 2011I have two WLC-5508 for 50 AP's deployed. One is primary controller & other is secondary.Recently noticed an unknown "authorization failed, no sufficient privileges for user" message poping up while making configuration changes in WLC. Specificly when trying to create an new SSID. WLC Authentication is local. This message poped up earlier once or twice but it didnt prevent from making changes that time.
View 3 Replies View RelatedCisco Wireless :: WLC 5508 - Mapping SSID With Authentication Protocol
Aug 28, 2012My customer wants to have mapping of WLAN SSID with different authentication protocol as show below .
1: EMP-M for Mschap
2: EMP-G for Peap GTC
3: EMP-T for TLS
For example EMP-M SSID users should be connected with only PEAP(MSCHAPv2) and not on other methods like PEAP-GTC/EAP-TLS .
customer is currently having WLC 5508 and using ISE for AAA . Any tip how we can do the above requirement through WLC .
Cisco :: 5508 - Set Up Guest SSID With Auto-Anchor Feature
Mar 7, 2013I am trying to set up a guest SSID which will be separate from other corp SSIDs. I have read about this auto-anchor feature and I have a basic idea. Here are some questions about the network design
1. Can Cisco 5508 with 7.2.111.3 code do NAT? I mean can I use the anchor controller also as a gateway to Internet or do I need another device such as FW or router to do the job?
2. I want the guests to get IP address in 192.168.0.0/24 range. On the anchor controller I will need an interface in this range, correct? However on the internal controller I won't need this interface. The guest ssid will be associated with the management interface on the internal controller, correct?
3. I want the guests to get IP address from general DHCP server. Does DHCP request have to come out of the new interface in the 192.168.0.0/24 range? However this interface will be connecting with the FW. It won't have connection back to the internal network to reach the DHCP server. The management interface will have the route to the DHCP server. Is it possible to use management interface for this SSID but still let traffic to pass through the Guest interface?
Cisco Wireless :: 5508 - Mobility Group Same Ssid Multiple WLC
Apr 7, 2013I have a 4400 and a 5508 WLC in the same location We want to be able to roam between ap joined to both the 4400 and the 5508 using only one ssid
Do I only need to create a mobility group and add both WLC then create only one WLAN on one of the controllers and it will be shared across bot WLC.
Cisco Wireless :: WLC 5508 - AP LWAPP With 2 SSID / DHCP Differences?
Jul 22, 2012I need raise a especial configuration to 34 APs LWAPP associated to WLC 5508 with IOS 7.0.220
This is the Scenario:We have 34 APs LWAPP with 2 SSID (Corporative & Guest), with 2 DHCP different. The Guest SSID receive IP to DHCP from WLC while SSID Corporative receive IP from Microsoft DHCP. The AP On Site are Local and the Foreign AP are configured like H-REAP (H-REAP Local switching and Learn Client IP Address are marked)
Here is the thing, I need configure a new WLAN (Pruebas) for add to 34 APs (Local and Foreign) but this new WLAN must be receive IP from a New Microsoft DHCP
Firstly I configured a new Physical interface and linked to New WLAN (Pruebas) however i don't know how configure the AP and the DHCP because I want that the AP deliver IP addresses depending the Locality.The last because the SuperScope from DHCP is divided in various subnets and because the IP from the AP will be in another VLAN
What Is Ssid Password Is Netgear 600
Dec 23, 2012what the ssid password is netgear 600
View 3 Replies View Related