Cisco Firewall :: Asa 5505 Cannot See Videos Through This
Aug 4, 2012
We have an ASA-5505 running 8.2(1) with a Bosch DVR 600. When a machine is on the local subnet, it can see the video; however, when it's moved to the DMZ, the unit can be accessed, but all video screens are black and an java script error pops up as follows: URl This message does not pop up when on the local subnet. Additionally, in the login screen, there is a language selection, and sometimes all languages are blanked out. There is a space for them, but they don't display. I've tried this on a half a dozen machines, either XP or Win7 with IE8 and IE9, and they all do the same thing. I disabled http inspection, but that doesn't work. I also did a packet capture, and the only packets that traverse the ASA.
We were having a discussion of ios firewall vs. asa for smaller clients(less than 50). On using ios firewall(zbf or cbac)and an asa 5505/5510. One of the arguments brought up on using ios firewall on the router is that a router will do an ip sla failover. I have configured a number of isr's for this and i know it works good.
I have a Cisco ASA 5505 in our office. We are currently using Interface 0 for outside and 1 for inside. We only have 1 Vlan in our environment. We have two three switches behind the firewall. Today the uplink to Interface 1, to the firewall, on the switch went bad. I want to setup a second inside interface on the firewall and configure it as failover incase this happens again. I want to attach it to the other switch. Can I do this? If so, what do I need to do? would it only be a passive/standby interface?
setting up an ASA 5505 to be used as a firewall between a BT internet router(BTNet service) and a Cisco 3560 Lan switch. BT have presented me with a cisco 3800 series router with the following details:
Network Address Network Mask BTnet NTE Router LAN Address
There are 2 Gigethernet ports on the back of the router port Ge0/0 is connected to the BT NTE and the status light is flashing green. Int ge0/1 is connected into port int e0/1 of the ASA but i am unable to get any connection.
I'd like to see some REAL LIFE comparisons of ASA firewall throughput (a bit like this one for ISR G2 Routers - [URL].
The reason I ask is that I recently upgraded a firewall from an ASA5505 to an ASA5520 on a small network where the only outside connectivity was a single 10meg Internet circuit with an IPSEC VPN (not landed on the firewall but on a router) to another site.
When I swapped out the firewall the users noticed a big improvement. The firewall is not doing anything out of the ordinary - no IPS or VPN, just standard state full inspection.
I have been working with ASA 5510,20,40,80 but not with 5505 this vlan and its interfaces are quite confusing.Just want to know how it works and its connectivity to Cisco Switch.Do i have to put the interface of the switch in the same vlan as i am creating the interface vlan in firewall ?Now the switch port connecting to this Eth1 interface should also be in the same vlan ? i.e vlan3 ?? or it will be in trunk ? The default configuration shows the eth0 with no access vlan and interface eth1 with access vlan 2... does it mean the eth0 is in vlan1 ? (Nativ Vlan ) ???
I have a cisco asa 5505 firewall. Is it possible to block secure websites in it like [URL]? I have already tried regular expression filtering but it filters only http traffic.
I am trying to configure our ASA 5505 so that our users can access our ftp site using [URL] while inside the firewall. Our ftp site is setup so that you can reach it by either browsing to the above url or by browsing to ftp://99.23.119.78 but we are unable to access our ftp site from either route while inside the firewall. We can access our ftp site using the internal ip address of 192.168.1.3.
Here is our current confguration:
Result of the command: "show running-config" : Saved:ASA Version 8.2(1) !hostname ciscoasaenable password qVQaNBP31RadYDLM encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Vlan1nameif insidesecurity-level 100ip address 192.168.1.1 255.255.255.0 !interface Vlan2nameif ATTsecurity-level 0pppoe client vpdn group ATTip address pppoe setroute !interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!ftp mode passiveobject-group service DM_INLINE_TCP_1 tcpport-object eq ftpport-object eq ftp-dataport-object eq wwwaccess-list ATT_access_in extended permit tcp any host 99.23.119.78 object-group DM_INLINE_TCP_1 access-list ATT_access_in extended permit tcp any interface ATT eq ftp access-list ATT_access_in extended permit tcp any interface ATT eq ftp-data access-list ATT_access_in extended permit tcp any interface ATT eq www access-list 100 extended permit tcp any interface ATT eq ftp
New to the ASA 5505 8.4 software version, but here is what I'm trying to do:
-Single static public IP: 16.2.3.4 -Need to PAT several ports to three separate servers behind firewall -One server houses email, pptp server, ftp server and web services: 10.1.20.91 -One server houses drac management (port 445): 10.1.20.92 -One server is the IP phone server using a range of ports: 10.1.20.156
Basically, need to PAT the ports associated with each server to the respective servers behind the ASA 5505. Is anything missing from this config? Do I need to include a global policy for PPTP and SMTP? [code]
I'm integrating a Cisco ASA5505 with a Websense proxy. I have a configuration setup where we have four routers which are used for Internet access. There are two VLAN's - Guest and Private. What I would like to achieve is making the use of available bandwidth by load distribution via GLBP, and filtering users web traffic. Two routers will be used for a GLBP group in one VLAN, and the other two routers will be used for GLBP in another VLAN.The users are connected to a Cisco 2960 switch and are in their respective VLAN's. I'm planning a 802.1q trunk to a Cisco ASA from the 2960 switch, carrying both VLAN's.What I would like to know is if there is a CSC module (or similar) which has Websense installed on it, and if it is possible to setup the ASA5505 in transparent mode to filter the traffic in this way? Hopefully this would allow multiple users to take advantage of the additional bandwidth, and not be restricted by using a traditional proxy setup which where all web traffic would be originating from a single MAC address.
I have an issue with my firewall,each time i configured a trunk port in the firewall and connect a sw 2960S with a trunk port also, all the interfaces in the Firewall go down ( virutal intertaces, inside, outside , dmz) , also another switch 3750 that is connected to another port in the firewall( access port only) it start to a new negotiation of spanning tree.What could be causing this problem? the firewall didnt sedn bdpdu i think the IOS of the firewall its a 8.2
we are planning on connecting a new aquired company to ours soon?We will connect the remote site to the HQ via a D3. I've been told we will need to have a firewall between them and us for a time. I was thinking of terminating the D3 connection at the remote site of 80 users. Can I use the asr as a firewall as well, to protect the HQ from the Remote site - or should I use a seperate appliance?I was thinking of a asa5505 but, am concerned with bandwidth limitations of the box?
I want to configure an ASA 5505 in transparent mode (7.x). Somehow, I got it to work.. but i need some kind of step by step description. I just want to connect it with outside on a route .. inside in my LAN. Its working now with one ASA. But in the Web Interface the Interfaces inside and outside are down.. but its working.
I have some 1080p video files on my PC. Since my PC isn't powerful enough to play the files smoothly, I have been streaming the content to my PS3 using Windows 7 media sharing.
This works well with no noticeable loss of quality.
My problem is that I have to go into the services on my PC and restart the WMPNetworkSvc service every time I switch the PS3 on, otherwise the PS3 doesn't detect the PC.
wat is wrong with my new ps3 160 gig it want at all play videos but i still have full access to going on sites and on top of that i cant get rid of trend micro in the tool bar
When I upgrade the ios on switches, I just create int vlan1 assign it an ip and subnet, then tftp to my pc that is plugged into the switchport using the download-sw command.
I am not sure how to do this on the asa. Do I just plug my pc into port 0 which the documentation says is mapped to vlan 1 with and ip of 192.168.1.1? I tried this by making my pc's ip 192.168.1.2 but am unable to ping the asa. Do I have to change the security level or anything?
I’ve been using a Cisco ASA 5505 Security Plus bundle for two years now without any problems. My previous Internet Service Provider was routing the external IP I was leasing directly through to my internal network without NAT which my ASA 5505 was working well with. Thus, I had configured my 5505 to provide NAT to my inside network which includes two subnets one for my workstations and internal "private" resources and a DMZ to provide access to my webserver, email server and two domain name servers; but restrict access to my internal; resources. i recently changed my ISP to Verizon FiOS (which is providing me with 25 Mb bandwidth at a fraction of the cost of my old T1) which is set up to provide 5 Static externally facing IP numbers for my email, webserver and name servers;. The problem is the Verizon router doesn’t support my use of the ASA Appliance (at least not the way it is currently configured. Verizon recommend I purchase a business class router and use it in place of the one they provided with my installation. With this in mind, I bought a Cisco RVS4000. I have configured it to use the primary external IP number and have internet access; however, the new router is providing NAT addressing which the ASA is in conflict with (they are both using the same NAT IP range). I'm assuming the ASA 5505 is expecting to have access to the external IP addressed (since that is what it was getting before) and NOT NAT address. How to configure the new router to either provide access to the five static external “real world” IP to my Cisco ASA Firewall. However, I just need to get my ASA 5505 back in the loop and would prefer to do this rather than go back to the Verizon router combined with a low end firewall. So, my questions are: Does the ASA 5505 expect real world External IP numbers? Or can it work with NAT addresses being fed to it from the router? And, if so, how do I configure the access rules and other items which are currently mapping to external numbers?
I am configuring a Cisco ASA 5505 firewall.In the office there is 1 x SBS 2008 server and 5 x PCs, all sat behind a Netgear DGN1000 ADSL router.We want to implement a ASA 5505 for added security.I have configured the internal interface of the Cisco ASA 5505 to be 192.168.0.1 - this is connected to local switch. The client PCs use 192.168.0.1 as their default gateway.I have configured the external ASA 5505 interface to be x.x.x.217. [code]Change the current router status from Router/Firewall/Modem to Modem only (Bridge mode). The ASA 5505 has its outside interface connected into one of the LAN ports of the netgear. The lan port has an IP of 192.168.0.254.
when i am booting ASA firewall i am getting the following error.
<0>Kernel panic - not syncing: Attempted to kill init! and it stops and will not work. check below the whole log file
how can i solve this issue?
Log file: Evaluating BIOS Options ...Launch BIOS Extension to setup ROMMON Cisco Systems ROMMON Version (1.0(12)11) #4: Thu May 1 14:50:05 PDT 2008 Platform ASA5505 Use BREAK or ESC to interrupt boot.Use SPACE to begin boot immediately. Launching BootLoader...Boot configuration file contains 1 entry. [Code]...
Over the course of the past three days, our ASA 5505 firewall has shut down twice. I looked through the Field Notices and it looks like this was a problem identified several years ago that was resolved for units built after June 1, 2007. The serial number on our unit is not in the "effected" range.
theres something wrong with my computer, Youtube works fine, but videos on facebook, and other websites dont work. Even when i watch live sports streams, it doesnt work. The video takes ages to load, and keeps freezing and lagging. I have tried many websites and none of them work
PC is connected through the router to the internet connection but internet cannot access the video from the YOUTUBE my pc operating system is Microsoft Windows Professional (5.1, build 2600) and processor is intel(R) pentium(R) 3.20GHz.
i have my laptop which i use at school okay and when i try and watch youtube videos at school it works fine but as soon as i try and watch them at home it just buffers and buffers and never loads, its definitely not the internet connection as my dad/mum/brother/ps3 can all watch youtube videos, and i dont know why this is happening.
I use to could be able to watch videos and listen to music, and download at optimal speeds, I could even watch HD if I wanted to, but now all of a sudden (starting at least 3 weeks ago) videos, downloads, and music seem to run super slow no matter what quality I have it on. It takes 5 minutes to buffer a 3 min video, and if I want to watch a show, it take like 2 or 3 hours to fully buffer. My internet still goes fast, and I have trendmicro antivirus, as well as ccleaner, i updated my drivers, i have ie9 and adobe flashhplayer 11.1, i updated everything in windows update, i unplugged the modem for awhile and shut down more often, and opened it up and blew all the dust out. I don't know what else to do. I do have a cisco E2000 wireless router if that's a problem, and both my ps3 and my computer are on the connection, but my computer was working fine with both on the same connection for a year. I go on the http:192.168.1.1 cisco place, and i renewed ip settings, and nothing worked.
HD (1920x1080) TV sees and plays all SD mpg (720x576) stored on a Lacie network drive. Now working in HD (1920x1080) and find that the TV does not even see the mpg files, let alone play them. If I convert the HD files to SD they are then visible again. It seems odd that a HD TV cannot see and play HD videos.
Lenovo core2duo Desktop XP Pro works OK to internet when hard wired to router.Marvell 88E8057 network card with latest May 2011 drivers on XP. Both a gateway laptop and an HP laptop also work hardwired.When I use a Wireless Access point, it works fine with the laptops. However, when I use the Lenovo desktop connected directly by wire to the WAP, I only get "partial" internet access.I can ping yahoo, I can get a google page. But any "thick" content seems to be blocked.I can't play any youtube videos on the Lenovo via the WAP, or view websites with rich content.I get the youtube page, but it hangs on play. the laptops work wether wired to the router, or wired to the WAP. With any content including youtube.
