Cisco Firewall :: CSM 4.3 And Tufin Connection Of Interface
Jan 22, 2012A Cisco engineer told me hat CSM 4.3 has a Interface to Tufin . How to confirm that ?
View 3 Replies
ADVERTISEMENT
Cisco Firewall :: Switch ASA5510 Outside Interface Connection
Mar 10, 2011Our ASA 5510 is running 8.0(5). We recently upgraded the license from base to security plus. By doing so the capacity of the the external port Ethernet0/0 and Ethernet0/1 should increase from the original FE to GE. But, we were still seeing 100 Mbps on our Ethernet0/0 interface. We figured that out that the provider switch is only supporting 100 Mbps which is a bottleneck for us.The provider will be upgrading there switches to 1 Gb switch.
We will have to swap the switch connections now from 100 Mbps to 1 Gb switch.What commands should we be familar ourself with?Though this will be doine in our maintenace window.All the transaltions/connections will be dropped in our production environment so we are kind of scared.
Cisco Firewall :: 5510 Http Connection On LAN Interface
May 26, 2011I am replacing an old Fw with a New ASA 5510 and I have a problem with a TCP Connection on My LAN InterfaceI joined a picture of what I want to do. [code] From the PC,I can Ping the Video Camera But I can't connect to it with HTTP.I don't understand, Packet Tracert allow the Http packet too. [code]
View 7 Replies View RelatedCisco Firewall :: ASA 5510 - No Internet Connection On Inside Interface
Jan 3, 2012so i have a ASA 5510. The ASA is Connect with the Internet through PPOE DSL MODEM
The outside Interface get an IP. The Inside Interface get through DHCP from the ASA the Internet DNS SERVER (T-Online) But the HOST do not connect to the Internet because the DNS Server is timed out
Code...
Cisco Firewall :: Edge Router Connection For Outside Interface Of ASA 5520
May 1, 2013We have ASA 5520 firewall.For broadband Internet access, we have T1 Router(edge router provided by ISP) which provides public IP's 198.24.210.224 / 29. We have usable public IP's 198.24.210.226 - 198.24.210.230 with default gateway 198.24.210.225. We assigned 198.24.210.230 255.255.255.0 to the outside interface.
If we connect the ASA 5520 outside interface directly to T1 router, can all packets with destination addresses 198.24.210.224/29 reach the outside interface without using other device like another router or switches?I just assume that only packets with destination address 198.24.210.230(outside interface ip) can reach the outside interface from the edge router.Is it wrong assumption? If it is correct, then is there any way to route all packets with destination address 198.24.210.224/29 to the outside interface?
Cisco Firewall :: 5540 ASA Interface Input Error On Outside Interface
May 28, 2013We are having Cisco ASA 5540 having Cisco Adaptive Security Appliance Software Version 8.0(5)23 at certain time of moment daily wer are facing latency and packetdrop wherin when I checked for ASA Interface which gives me " Input Errors" on outside interface ,so can any one tell me what are the causes to get input errors on cisco asa outisde interface.
View 2 Replies View RelatedCisco Firewall :: PIX 501 / Can Traffic Goes From Inside Interface To Outside Interface
Oct 9, 2011I have Pix 501 firewall and I'm just configuring the device for "Email Server" to allowing POP/SMTP.
Inside Interface Address: 132.147.162.14/255.255.0.0
Outside Interface Address: ISP provided IP address
My question is can my traffic goes from inside interface to outside interface? (because the inside interface address not from 10.0/172./192.168 private address)Also I'm allowing internet from this email server (132.147.162.14) so what my access list to be configured? and what my subnet mask shoud be there?
Pix(config)#access-list outbound permit tcp 132.147.162.14 255.255.0.0 any eq 80
Pix(config)#access-list outbound permit udp 132.147.162.14 255.255.0.0 any eq 53
Pix(config)#access-group outbound in interface inside
Cisco Firewall :: ASA 5550 - Interface Failover / Interface Goes Down
Mar 18, 2013I've got a ASA 5550 firewall interface failover issue. (File attached).
when I shut down the inside interface Gi 1/1 of the left firewall(Active firewall), It failed to failover. but when I shut down the Gi 1/12 of the Core 1 switch, The firewall failover very well.
I followed this guide but I was not able to failover. [URL]
how can I configure so that when the Gi 1/1 or Gi 1/0 interface goes down, it can failover ? Code...
Cisco Firewall :: Failover ASA 5505 - Setup Second Inside Interface On Firewall?
Feb 19, 2012I have a Cisco ASA 5505 in our office. We are currently using Interface 0 for outside and 1 for inside. We only have 1 Vlan in our environment. We have two three switches behind the firewall. Today the uplink to Interface 1, to the firewall, on the switch went bad. I want to setup a second inside interface on the firewall and configure it as failover incase this happens again. I want to attach it to the other switch. Can I do this? If so, what do I need to do? would it only be a passive/standby interface?
View 1 Replies View RelatedCisco Firewall :: ASA 5520 - Routed Management Interface On Transparent Firewall?
May 5, 2013I have an asa 5520. How would I configure my dedicated management interface to be able to route off subnet while the firewall is in transparent mode?
View 1 Replies View RelatedCisco Firewall :: 3945 / Zone Based Firewall And WAN Interface ACL?
Mar 16, 2011I am getting ready to deploy a 3945 ISR to serve as an internet and core router for and remote site. I will be terminating a site-to-site VPN tunnel on it and also configuring a zone based firewall config between my "outside" (internet link) and "inside" (all internal nets). My question is about how to approach securing the WAN interface with the Zone based FW in place?what kind of ACL do I need beyond those allowing and restricting remote access to the outside ip?
View 3 Replies View RelatedCisco Firewall :: ASA5505 Can't Ping New Firewall On Inside Interface
Jul 14, 2011I've recently upgraded my old firewall from a PIX to an ASA5505 and have been trying to match up the configuration settings to no avail. I have is that I can't ping the new firewall on it's inside interface, despite having "icmp permit any inside" in the running config. Secondly, the server I have on there ("Sar") can't connect out to the internet.I've included the ASA's running config incase anybody can see if something stands out. I have a feeling it's either not letting anything onto the inside interface, or there is no nat going on. Lastly (and possibly relevant), the firewall is actually going at the end of a vlan, which is different to the firewall's inside vlan number. I don't know if this is actually the problem because the server can't connect out even if connected directly into the firewall.
View 32 Replies View RelatedCisco Firewall :: ASA 5505 Creating Interface Vlan In Firewall
May 3, 2011I have been working with ASA 5510,20,40,80 but not with 5505 this vlan and its interfaces are quite confusing.Just want to know how it works and its connectivity to Cisco Switch.Do i have to put the interface of the switch in the same vlan as i am creating the interface vlan in firewall ?Now the switch port connecting to this Eth1 interface should also be in the same vlan ? i.e vlan3 ?? or it will be in trunk ? The default configuration shows the eth0 with no access vlan and interface eth1 with access vlan 2... does it mean the eth0 is in vlan1 ? (Nativ Vlan ) ???
View 4 Replies View RelatedCisco Firewall :: 6509 ICMP Echo From Firewall Interface
May 1, 2011two 6509 chassis with VSS configuration.One of those chassis have one FWSM installed and the configuration is like this:
Switch: firewall multiple-vlan-interfacesfirewall switch 1 module 3 vlan-group 1firewall vlan-group 1 3-5,7,8,10,200 interface Vlan200 ip address 10.50.50.1 255.255.255.252end
I am not receiving icmp replays from the fswm interfaces if i try to ping 172.20.80.1 from 10.50.50.2.I do not see any debuging info in the logsI successfully ping 10.50.50.2 from the inside networks int the cat6500, but int the network 172.20.80.0, can not ping 10.50.50.2.
Cisco Firewall :: ASA5510 Firewall Interface Speed
Jul 21, 2011I have a ASA5510 and I have a question about the speed the ports can handle, here is one port:
-interface Ethernet0/2
- speed 100
-shutdown
- no nameif
-no security-level
-no ip address
it's ethernet and not fastethernet so I figure it will only go to 10Mbps, but at the same time I can hard code the speed to 100.
Cisco Firewall :: Unable To See Interface On ASA 5510 Firewall?
Jul 29, 2012I am unable to see 4th interface on my firewall i.e fastether0/3 on my firewall ASA 5510.
Below is the output.
ciscoasa# sh int ip br Interface IP-Address OK? Method Status Protocol Ethernet0/0 x.x.x.x YES CONFIG up up Ethernet0/1 x.x.x.x YES CONFIG up up Ethernet0/2 unassigned YES unset administratively down down Internal-Control0/0 127.0.1.1 YES unset up up Internal-Data0/0 unassigned YES unset up up Management0/0 192.168.1.1 YES CONFIG up up
Cisco :: DSL Connection - What Is Interface ATM0
Dec 12, 2012Could you explain me what "interface ATM0" is ? Is it virtual interface or physical ? And in this configuration ATM stands for Asynchronous Transfer Mode or anything else?
View 11 Replies View RelatedCisco VPN :: IPSec VPN Connection From DMZ Interface ASA 5510?
Oct 11, 2011I currently have an ASA 5510 setup with Dual homed ISP's and a remote access IPsec VPN setup to terminate at either interface. The first interface is named Outside and the second is simply called Outside-2. When outside the company(such as at home), the VPN client will connect on the Outside-2 interface and work normally. The problem is while testing on our DMZ, the VPN Client will not connect on the Outside-2 interface. It will try that interface fail to connect and then connect to the backup Outside interface. This isn't a huge concern because it still connects, but if we were ever to get rid of one of those connections, it would be nice to reliably test from our DMZ.
View 1 Replies View RelatedCisco WAN :: 2911 - Dialer Interface / No Connection
Jan 9, 2011having some issues with a configuration using a Dialer interface. The interface comes up and the VPN tunnel comes up, but cannot access any network resources or the Internet.
The things that concern me most are my access lists as I have the static IP address that we are assigned via PPPOE - the IP never changes, but not sure if I can define it in the ACL or if I should be using an ANY tag.
Note: I've changed some IPs and username for security reasons.
!version 15.0service tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryptionservice sequence-numbers!hostname C2911-OTO01!boot-start-
[Code].....
Cisco WAN :: ASA 5520 (Interface 1 And 2) Connection Settings
Feb 6, 2012I have attached setup like this :- This is the same scenarios as ASA with Dual WAN setup. But my requirement is different. I have added in ASA and configure sla is asa, all working fine. When one link goes down traffic pass through backup route. my sal config is below:-
sla monitor 100 type echo protocol ipIcmpEcho 10.5.5.120 interface Link1
num-packets 3 frequency 10
sla monitor schedule 100 life forever start-time now
show runn routes are :-
route Link1 10.5.5.0 255.255.255.0 10.4.4.5 1 track 10
route Link2 10.5.5.0 255.255.255.0 10.6.6.5 254
Is there any way that i can implement track on 2nd link to destination? because may be after Link1 failure when backup route was it would be able pass traffic to destination, may be link failure between Link router and Destination. Can i monitor backup link if that is active and traffic can pass to destination when 1st Link1 will fail.
Cisco Wireless :: WLC 5508 Management Interface Connection
Aug 1, 2010I'm setting up a new 5508. I've used the config from a 4402, have successfully connected to the Service port to manage the device, but for some reason cannot connect to the Management interface. In this case, port 1.
The service port is connected to a Catalyst switch and grabbed an ip address (10.2.x.x subnet) no problem. I can access the 5508 via https using the SP. However, port 1 is connected to the same Catalyst switch, but on a different vlan (subnet 10.20.x.x). Both ends show that the interfaces are up, I can ping the interface from any other host on the network, but when I try to manage the device via https I cannot connect. We are using WCS and I cannot add the device from the WCS. About all I can do is ping that interface.
Cisco WAN :: 1841 ADSL Interface Dropping Connection
Jul 2, 2012We have an ADSL2+ line from a WIC in a 1841, everything has been fine for the last few years and then the last few months the connection going down. When checking the interfaces the ATM0/0/0 is up up and the same for the dialer interface we are using, they are both up/up, but this still needs a reload of the router to be functional again, shutting the interfaces does not bring the connection back up.
I am not an expert on ADSL lines, I have never really had a problem with anything previously. The router was running Netflow to a network monitor wondering if this or logging was causing an issue with entries in the buffer??
Here is an output of show dsl int, would change the firmware, it has been fine all this time before though we are running IOS 12.4(24)T1 advseck9-m, as far as I can seen from our ISP the config for ADSL is all correct. [Code]
Cisco Firewall :: Sub Interface On ASA 5505?
Dec 10, 2012I want to creat sub int on ASA 5505 but when I am trying below command it show error.
------------------------------------
config t
int f0/0.3400
------------------------------------
My ASA software version is 8.2(5).
Cisco Firewall :: Sub Interface On ASA 5505
May 13, 2009Can we make sub interface on Cisco ASA 5505 model and if its possible then do that interface need to be upgraded into Trunk Port.
View 8 Replies View RelatedCisco Firewall :: PIX 525 Multiple Outside Interface?
Oct 16, 2012We are in the process of adding second isp for webhosting purposes .Is there any issue if we are making outside 2 interface on the pix .i need to host some websites through this new link ie isp2 .
PIX Version 7.0(7)
Cisco Firewall :: Add Second IP To Outside Interface Of ASA 5520?
Nov 15, 2011We have a block of addresses assigned to us by our ISP. We need to assign one of these addresses to a vendor we use for traffic to one of their internal devices. Lets say the address we gave them out of that block of addresses is 1.2.3.4
How do I add that address to the outside interface so that when traffic s sent to it that the traffic actually gets to the ASA as right now when we send traffic to that address it doean't make it to the ASA.
Cisco Firewall :: ASA 5510 - VPN From DMZ To Outside Interface
Mar 20, 2011Have an ASA 5510. Setting up a new DMZ zone for wireless and it will only have Internet access. What are the steps so that users on this new DMZ subnet can VPN into the Outside interface on the same ASA?
View 4 Replies View RelatedCisco Firewall :: 1841 NAT Out One Interface But Not Other With IOS?
Feb 27, 2012I am trying to figure out how to use a Cisco 1841 IOS router to take traffic from one interface and source NAT it out towards the Internet on one interface and at the same time NOT perform NAT when sending the traffic towards a different routed interface.
Here the RemoteSite has connectivity back to the MainCampus, but there is no need to NAT traffic from the one site to the other. They share the same umbrella of address space. However, the RemoteSite needs to have its Internet-bound traffic NAT'ed out to the Public Internet via a third interface. I know that I could just NAT everything out from the Remote Site and map the traffic back onto the same address space for intra-campus communication, but I'd rather avoid that and just NAT where I need to NAT it to the Internet.
I do have a caveat here: in the event that either the MainCampus or the Public Internet interfaces go down, I would like to failover traffic from the downed link to other good link. For example, I want to NAT all traffic (including "intra-campus" traffic) out via the Public Internet if the direct link to the MainCampus is down. For the other example, if the Public Internet direct link is down, I would just send out all traffic without NAT towards the MainCampus.
Cisco Wireless :: AP541n Losing Connection To Management Interface
Nov 1, 2010I have a client with an AP541n, most recent firmware installed. When he logs into the management interface (via IP using Google Chrome browser), it will work for a few minutes and then just disappear. If he attempts to reload the page he gets a message similar to a website being down (page cannot be displayed). The idle timeout has been extended to 4 hours, but this can happen at any point while logged into the interface.
View 1 Replies View RelatedCisco WAN :: Number Of Maximum Tcp Connection At Same Time On Interface Of 7200?
Feb 28, 2012i want to know a number of maximum tcp connection at same time on interface of my 7200 router,how i'll do that?any configuration, software?
View 1 Replies View RelatedCisco Firewall :: ASA 5510 - Web Interface And SSL VPN Pass Through?
Mar 1, 2011I have a trouble with Cisco ASA 5510. I configured an SSL VPN with bookmarks to some application. When the users make access to the Web Portal they have to login twice: one for enter in the SSL and one for enter in the application.
How to bypass double authentication?
Cisco Firewall :: Asa 5505 Cannot Telnet Or Ssh To The Outside Interface
Sep 9, 2011I setup a site-to-site VPN tunnel at the remote ASA5505. I am able to asdm to the outside interface but not ssh. I switch to telnet and still not allow me to access. I added an ACL to allow telnet any to the outside interface but still not working. In ASDM I see the log Here is the second issue. When I want to change the telnet back to ssh using ASDM I got the following error.
View 2 Replies View RelatedCisco Firewall :: DMZ Sub Interfaces Into Sub Interface Of Asa5510
Jul 5, 2012We have ASA FW 5010 in our organization and we have 4 DMZ's under the DMZ interface on ASA and all DMZ's are created on sub interfaces and assigned different VLANS on each DMZ's.
View 7 Replies View Related