Cisco :: Flush / Delete Devices From Prime LMS 4.1?
Dec 3, 2011
Discovery got a little messed up when importing from LMS 3.1
Basically I want to flush all devices from all the different LMS modules. If I delete all devices from Device Management they seem to stay in Topology Services / Device Discovery / Data Collection etc.. They keeps the old device in their own database.
Is there a way of flushing all devices from all these different modules. I'm going to re-import them with a clean CSV import file.
View 5 Replies
ADVERTISEMENT
Apr 9, 2013
I just got PI1.3, I'm new with it, and I don't know how to add devices. I have an 4500-X, an 3850 and 12 pcs. 2960S.
I see that are some out-of-the-box templates, but when i try to deploy, for example "medianet perfom" in Devices box I got "no data available"
What I have to configure on switches?
View 2 Replies
View Related
Feb 7, 2011
I have to do ipconfig /flushdns from my Laptop to access my PC, on my local network, for some reason when the Laptop is booted up.After that all works like it should. I made a batch file to do that command during Windows start up. Is there any reason why I have to do this or is it just something quirky with Windows?Both computers have Windows 7 Pro 64 bit. Both use the same DNS servers.
View 8 Replies
View Related
Sep 1, 2011
I have not been able to get onto the internet in about 2 days now. I know my modem (2wire) is working correctly, I spent 2 hours checking it thoroughly with my internet provider. I have checked various websites and have flushed my DNS, brought back my computer to it's original manufactured settings, I even deleted and re-installed the network device but still I am only able to access my local network. I'm wondering if there are any other suggestions for fixing my computer
View 7 Replies
View Related
Sep 1, 2011
I tried ipconfig /flushdns and ipconfig /renew in cmd and got these errors: Windows IP Configuration Could not flush the DNS Resolver Cache: Function failed during execution.
View 9 Replies
View Related
Feb 27, 2013
I have been encountering a can't find server (not page not found error 404) message in two ways. Either using a hyperlink to open a new web page or returning to a tab will yield this error. Refreshing the page will render the page properly.The two cures I have found that look to be the most promising are to run ipconfig /flushdns from the command prompt and to clear the prefetch cache.
View 18 Replies
View Related
Jan 14, 2013
i have an internet but my f7d6301 v1 not working ...the device flush red color instead of green
View 1 Replies
View Related
May 9, 2013
I'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2. I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration to Prime Infrastructure goes well. I am planning to follow Cisco's recommendation to run Prime LMS and Prime Infrastructure in parallel for a time and migrate individual functions.
My real question is about Syslog handling. All of the managed devices are currently sending Syslog data to LMS. As a last step in the migration, is it possible to change the IP address of the Prime Infrastructure server to replace the Prime LMS server so that the Prime Infrastructure server will just start getting all the Syslog data, or do I need to go change hundreds of managed devices to point to a new address?
View 2 Replies
View Related
Mar 12, 2013
What is the relation between: cisco NCScisco Prime LMSCisco Prime infrastructure.As i orderd a Cisco Prime infrastructure from a Cisco Partner and what i got is :
x2 cisco NCS appliances
x1 DVD cisco prime infrastructure
x1 DVD Cisco prime 4.2
View 4 Replies
View Related
Jun 1, 2012
Currently my home network is being switched via TrendNet TEGs80G unmanaged gig switches. I have been using them for about a year now with no issues. As my home network becomes more advanced, I recently just added a Cisco ASA5505, I am thinking about swapping those unmanaged devices, 4 of them, to managed. I was looking at the Cisco SG300-10 for upstairs, and a 16 port variant for my main core. These devices do not support full Cisco IOS cli, but they are manageable with a rich feature set nonetheless. My question is, should I swap the unmanaged devices with the more expensive Cisco devices, or just keep what works and save the money until I really need to spend it. As previously stated, my home LAN works just fine as it is, however my WiFi, NTV550s, server and workstations are all on the same network. Probably not the most secure but it is what it is without VLAN support.
View 11 Replies
View Related
Aug 15, 2011
I have installed my new E4200 and it works beautifully. I have several wirelss adapters and a few wired connections through powerline adapters. I also have a second VPN router attached to the 4200.I can see the wireless connected devices with the associated IP addresses. If I plug a laptop directly into the Cisco, I can of course see it.However, I can see none of the devices attatched to the powerline devices? I have a securty cam connected via the powerline and want to know the IP address. I checked with cisco technical support via chat and they said it is impossible. I have used 2 previous routers with the same configuration and can see all devices.
View 1 Replies
View Related
Jul 26, 2011
I have been trying to delete unwanted contacts from my contact list. I have done all of the things on your list and nothing works. Your old system was so much better'than this new yahoo mail. Why did you change something that worked, and was so much easier to understand?
View 1 Replies
View Related
Aug 5, 2012
i created a new wireless network by going to network instrastructure and right clicking on pk5000z ap and configure. then set up a network pop up asking for 8 digit pin from the router label i typed the pin in. now that i made a new network the new network shows up instead of my old network.i cant connet to my old network even if i type it in manually. ive tried to delete the new network in manage wireless networks. but it still shows up.
View 5 Replies
View Related
Apr 24, 2011
I get error message like "can't delete old iTunes downloader or something like that.
View 5 Replies
View Related
Sep 19, 2011
How to delete non existent domain
View 1 Replies
View Related
Nov 13, 2012
I recently cleared out a router. I did that by typing confreg 0x2142 in rommon mode. Once I was in enable mode
[code]...
View 3 Replies
View Related
Dec 22, 2011
I'm trying to automate our rollout process with kiwi cat tools. I want to copy a file via TFTP or FTP: Cisco tftp menu knows the latest ip address which it was connected to.
View 3 Replies
View Related
Jun 28, 2011
I've inherited some ACS appliances from another part of my organization. I need to keep most of the settings but want to remove all the AAA clients; and preferably not one-by-one. I don't see a way in the documentation and web searches have proven fruitless.
View 1 Replies
View Related
Mar 10, 2005
I was given a 510 PIX Ver 6.3(1)to reconfigure but have no information on the existing configuration and need to wipe it clean and start over how can I do this to get back to the factory default settings. I have tried the "monitor>" but I don't know the IP address of the PIX interface.and am not sure how to do the setup for recovering the password.
View 7 Replies
View Related
Oct 23, 2011
We are evaluating Cisco ACS 5.2 and I can not delete a service policy that was created. The message we receive is " the item that you are trying to delete is being referenced by other items". I am new to ACS, but I did go through each tab in the manager multiple times.
View 5 Replies
View Related
Oct 17, 2011
I had install third party CA cert and device cert into the WLC. I would like to ask is there any command can delete these certificate?
View 2 Replies
View Related
Mar 28, 2011
delete a lease from a DHCP scope on a WLC 5508? I'm using that unit as the dhcp server, no relay. I am unable to find anything either through the web or cli.
View 2 Replies
View Related
Dec 5, 2011
i'm at the moment not able to delete a licence from a 4710 Balancer. The Problem: We've this ACE from our Service-Partner, and on the chassis was a SSL-7500 licence installed. The file was deleted from the partner, but NOT uninstalled!
Now, the ACE works with this licence:
#show license status
Licensed Feature Count
[Code].....
View 6 Replies
View Related
Jun 25, 2012
on the acs 5.2 , how to delete specific log for user X, ?
View 3 Replies
View Related
Apr 22, 2013
I'm an ASDM 6.4 command line novice & I'm looking for the command to delete an unused vpn key, e.g. 'key1'.Or if there's a GUI method?
View 2 Replies
View Related
Jan 1, 2012
I have 3 versions of Net framework(2.0sp2, 3.5sp1, and 4.0) on my system Secunia wants all 3 versions updated.I am not for sure where they came from.can I delete NF2.0sp2 and 3.5sp1 and simply run with 4.0?
View 2 Replies
View Related
Jan 17, 2013
I'm trying to delete downloaded movies off my laptop to free up some space-I tried uninstall but realize it isn't a program-we want to keep only a couple of movies-no success...
View 2 Replies
View Related
Feb 26, 2012
I have a wireless PC laptop and a router that works fine. When I change rooms, there's competition from my neighbor's router and I want to remove it. When I "view wireless networks" I see their connection. When I go to "change the order of preferred networks" (hoping to delete it from there) it doesn't show up. If I go to "change advanced settings" I end up in the same place not showing the neighbor's wireless.
View 4 Replies
View Related
Jan 29, 2012
Have a long-time friend who is almost totally computer illiterate to whom I provide tech support. He uses MSN Explorer (MSNE) thru Verizon.net, which has been free up 'til now, but beginning March 1, 2012, Verizon is dropping it. I advised him to drop MSNE and switch to FREE Outlook Express (computer OS is XP) or Thunderbird. But as you might expect, he is averse to change. To keep MSNE, he had to subscribe to it and pay the $9.95 annual fee for the basic version, which he did today.However, he has apparently also had, but never used, a Hotmail address, and on the MSNE e-mail page, it shows in the left panel like a separate account. He wants to remove it from MSNE. I know nothing about MSNE; am used to Outlook Express and Thunderbird, both of which have simple access to accounts, including deleting them. I can find nothing in MSNE about deleting the Hotmail account.So how can he delete the link to his Hotmail account?
View 6 Replies
View Related
Feb 25, 2011
How to delete run command dropdown list
View 1 Replies
View Related
Aug 17, 2012
How can I remove the PIN code that's been configured in my computer. My computer shares in a home network that bumps everyone out whenever I go into the internet including the owner of the BELKIN network router to whom we are connected to the internet. I mistakenly connected into the network via the router's PIN Code resulting in my computer being configured and the rest of computers in the network being bumped out. Instead of just typing the passphrase/password I typed in the text box the PIN code for the Belkin router when it asked for the PIN code instead of just connecting into the internet without necessarily configuring my computer for the BELKIN router? how to remove the PIN code in my computer so that I do not bump everyone in the network.
View 1 Replies
View Related
Sep 27, 2011
I have a WRV210 router that is not allowing me to delete a VPN client that I had perviously set up. When I go to remove this client on the VPNVPN Client ACCESS table the s/w re-directs me to the Status VPN client table. There I cannot flag/check the disconnect box. I have version 2.0.1.5 s/w which is the latest.
View 0 Replies
View Related
Mar 20, 2013
I'm configuring a new 2911 running c2900-universalk9-mz.SPA.151-4.M4. In the config by default is "line 2" its not a vty, aux or console line and I can't remove it.
View 1 Replies
View Related
