Windows IP Configuration Do Not Flush DNS Resolver
Sep 1, 2011I tried ipconfig /flushdns and ipconfig /renew in cmd and got these errors: Windows IP Configuration Could not flush the DNS Resolver Cache: Function failed during execution.
ADVERTISEMENT
Have To Flush DNS Cache To Access PC?
Feb 7, 2011I have to do ipconfig /flushdns from my Laptop to access my PC, on my local network, for some reason when the Laptop is booted up.After that all works like it should. I made a batch file to do that command during Windows start up. Is there any reason why I have to do this or is it just something quirky with Windows?Both computers have Windows 7 Pro 64 bit. Both use the same DNS servers.
View 8 Replies View RelatedNo Internet Connection After DNS Flush?
Sep 1, 2011I have not been able to get onto the internet in about 2 days now. I know my modem (2wire) is working correctly, I spent 2 hours checking it thoroughly with my internet provider. I have checked various websites and have flushed my DNS, brought back my computer to it's original manufactured settings, I even deleted and re-installed the network device but still I am only able to access my local network. I'm wondering if there are any other suggestions for fixing my computer
View 7 Replies View RelatedSharing :: Flush Dns And Clear Prefetch Cache?
Feb 27, 2013I have been encountering a can't find server (not page not found error 404) message in two ways. Either using a hyperlink to open a new web page or returning to a tab will yield this error. Refreshing the page will render the page properly.The two cures I have found that look to be the most promising are to run ipconfig /flushdns from the command prompt and to clear the prefetch cache.
View 18 Replies View RelatedCisco :: Flush / Delete Devices From Prime LMS 4.1?
Dec 3, 2011Discovery got a little messed up when importing from LMS 3.1
Basically I want to flush all devices from all the different LMS modules. If I delete all devices from Device Management they seem to stay in Topology Services / Device Discovery / Data Collection etc.. They keeps the old device in their own database.
Is there a way of flushing all devices from all these different modules. I'm going to re-import them with a clean CSV import file.
Belkin Routers :: F7d6301 - Device Flush Red Color Instead Of Green
Jan 14, 2013i have an internet but my f7d6301 v1 not working ...the device flush red color instead of green
View 1 Replies View RelatedWindows 7 Lan Doesn't Have A Valid IP Configuration?
Oct 9, 2012I know this question seems to come out a lot but I can't seem to fix it. I am a college student and my internet has worked 100% fine until I went home this weekend and came back. It worked this weekend when I brought my computer home and when I came back today it gives me this error when I try to troubleshoot. The only thing that could have changed is when I went home I set my DNS to be openDNS because it makes a huge difference there, but I changed it back when I got here. I don't know if that would matter, but unplugging and restarting are doing nothing.
View 3 Replies View RelatedWindows 8 - Ethernet Doesn't Have Valid IP Configuration
Mar 16, 2013I'm using an ethernet cord to connect to my internet and it has been working well until Thursday morning when I turned on my laptop (Windows 8) to see a yellow triangle sign in the bottom right hand corner, in front of the ethernet connected symbol. Since then I haven't been able been able to access the internet from my computer. When I hover over it, it says that it is an "Unidentified network" and there is "No internet access". I've run the Windows 8 troubleshooting and it says that the problem found was ""Ethernet" doesn't have a valid IP configuration", but I'm unsure how to fix it.
I'm thinking that the problem is to do with my computer rather than my network, because I've tried another laptop (Windows 7) through the same ethernet cable and connection and the internet works fine on the other laptop. I've tried so many fixes that I've found online, with none of them actually working. Yesterday I even tried a full system reset, where I reinstalled Windows 8, repartitioned and wiped everything off the hard drive, but it still appears have the exact same problem.
Today I also purchased and tried a new ethernet cable which didn't work, so I then purchased a USB to Ethernet adapter, to make sure that it wasn't my ethernet port on my laptop that was faulty. That didn't work either, and the same problem still remains.
Windows Vista - Domain Name Server Configuration Error
Jul 21, 2011I can't seem to get the browser to properly show spacing.So I was browsing the internet normally, then all of the sudden, I'm disconnected. When I reconnected, I was able to access the network, but unable to connect to the internet. After attempting to diagnose the issue, I got the "There may be a problem with your Domain Name Server Configuration."can't connect to well known host microsoft.com.
View 9 Replies View RelatedWindows 7 64bit - Ethernet Doesn't Have Valid IP Configuration
Apr 4, 2013I have the same problem in running win7 64 powerline adapters all 3 light green stable and getting "doesnt have a vaild IP config" error msg
Windows IP Configuration
Host Name . . . . . . . . . . . . : ****-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]...
Easy Way To Export Windows Configuration To Bind Config
Jun 13, 2012I have inherited a working but ancient Win 2000 DNS/Web Server on a T1 line and need to update it to a more modern Linux system. Is there a relatively easy way to export the windows configuration to a Bind config that I can modify?
View 1 Replies View RelatedCisco :: LMS 4 Didn't Change Default Configuration Of Windows
Aug 18, 2011I recenly installed LMS 4 on a windows 2008 R2 system , I didnt change the default configuration of windows or ciscoworks.I just added devices and configured basic things on the LMS system .when I open ciscoworks on the server itself it starts a browser session on http port 1741 and then changes automatically to https even though the default config is browser security disabled on ciscoworks.I try to open a browser session on a mgmt station to the cisco server , it didnt work in https ( I did get the login screen but couldnt log on , probablly something to do with the certificate ) , so I open http on port 1741 and it worked , I was able to log in .After a few Hours for some strange reason I didnt have access any more from the mgmt station not in http nor in https , the only way was to access it from the server itself.I went and changed the default setting of the secure browser on LMS 4 hopping that would work , I was asked to restart the ciscoworks service for the changes to take affect , I tried to restart it but it was unsuccesful so I restart the whole server. when it came up ciscoworks didnt work most services didnt start ( like the web server ,tomcat and all the manual services and ciscoworks deamon)
View 1 Replies View RelatedCisco Routers :: RV042 Configuration With QuickVPN In Windows 7
Oct 1, 2012I've been working on getting a client to Gateway configuration going for quite some time now. Had it working with a different Cisco single wan router that failed. The user replaced the router with an RV042 and we are trying to get the QuickVPN to once again connect to the router as it did before the replacement. Previously we did connect successfully with Windows 7 clients.
Router: RV042 v3 firmware 4.0.4.02-tm Quickvpn version 1.4.2.1
what i keep getting in the log is the following :
2012/10/02 12:55:07 [STATUS]OS Version: Windows Vista
2012/10/02 12:55:07 [STATUS]Windows Firewall Domain Profile Settings: ON
2012/10/02 12:55:07 [STATUS]Windows Firewall Private Profile Settings: ON
[Code].....
Local Area Connection Doesn't Have A Valid IP Configuration - Windows 7?
Aug 1, 2012So I built a PC recently, using Powerline for Internet access. At first the PC wouldn't connect to the Internet so I moved the wireless router and the Powerline plug into another room and plugged them directly into the wall socket (previously they were plugged into an extension lead). I got Internet access on my PC, but 2 laptops and another PC were having trouble connecting to the Internet using Wi-FiWhen I moved the router and Powerline plug back to their original place, my PC wouldn't connect again (all other computers could) and I got the "Local Area Connection doesn't have a valid IP configuration" error from the network troubleshooting tool.So it's either I'm the only one that does get Internet when I move the router, or I'm the only one that doesn't get Internet when the router's in its normal place.[CODE]
View 3 Replies View RelatedCisco AAA/Identity/Nac :: ACS 4.2 Configuration With Windows 2003 Active Directory?
Apr 22, 2011i have installed system (Windows Server 2003) and i have configure Active directory for testing and configure one user under it ( TEST01)now on the same machine i have installed Cisco ACS 4.2.i'm trying to Authenticate (TEST01) using ACS but it's not working, i can't even see the logs under EVENTVIWER. simple and easy to configure since both AD and ACS is on the same machine.
View 4 Replies View RelatedCisco AAA/Identity/Nac :: Delete Proxy Configuration On Secure ACS 4.1 For Windows?
Feb 6, 2012We have a pair of ACS 4.1 servers (Windows Server 2003 R2). Let's call them ACS1 and ACS2. We don't want either one of them to proxy to any AAA server, including each other. We're using mostly TACACS authentication.
While troubleshooting a general problem, I'm guessing that one of us did this on ACS1:
pressed the Network Configuration button,saw the Proxy Distribution Tableclicked (Default)moved ACS1 from the AAA Servers column to the Forward To column.
So, essentially, we're telling ACS1 to proxy all requests to itself, which doesn't seem to make sense. I don't know for sure whether it should work when configured to "self proxy," but in that state, it does not authenticate anyone and gives merely "Internal error" as the reason.
If I change the configuration so that "ACS2" appears in the Forward To column, and I move "ACS1" back to AAA Servers and restart, ACS1 starts responding correctly to TACACS requests. Of course, ACS1 is just proxying all requests to ACS2, so having two servers isn't doing much good.
I cannot simply remove ACS1 from the Forward To column and leave it empty. The interface complains that it can't forward to zero servers. Of course, on ACS2, there are no servers in the Forward To column, since we never touched the Proxy Distribution Table there.
Is there any way to return the Proxy Distribution Table to its default setup, that is, no servers appear in the "Forward To" column?
We're planning to upgrade to version 4.2 very soon, so this question is mostly academic, unless the same problem exists in 4.2.
For full disclosure, I should mention that the problem we were troubleshooting was loss of connectivity to our Windows Domain Controllers from our ACS servers. We had missed adding some exceptions in our firewalls to allow for four new DCs. As far as we can tell from testing, connectivity to the DCs is now fine. The firewall rules group ACS1 and ACS2 together, so connectivity should be the same, and ACS2 authenticates users correctly.
Cisco Wireless :: Configuration Between Controller 2504 And Windows 2008?
Nov 25, 2012I am actually working in configuring a wireless controller 2504 integrated a windows 2008 server as radius server for authenticating the network users registered in a windows active directory database. The Radius server is a Windows 2008 Server with the rol of Network Policy Server.
I have been following a pair of documents in Internet, but it doesn't work yet.
Which authentication method should i use?...the Windows 2008 NPS doesn't work wtih LEAP, should i use PEAP or there is an another recomendation to authenticate the windows active directory users?
configuration tested working between a cisco wireless controller and Windows 2008 NPS as Radius Server for authenticating the windows network users.
Local Area Connection Doesn't Have A Valid IP Configuration (moved From Windows 7)
Feb 17, 2011I have a problem with a direct crossover Ethernet connection between two computers. One is a Win XP laptop, the other a Win 7 64 bit desktop. I have a USB adapter on the desktop and the laptop used that to share internet with the desktop. This setup worked fine until today. There have been no network hardware changes nor software changes but the desktop's power supply recently failed and had to be replaced. After that was done I tried today to plug the adapter and cord back in and use the connection but it will not work. The connection from the modem to the desktop works fine but the connection from desktop to laptop will not detect internet access, says "Local area connection doesn't have a valid IP configuration" and has limited connectivity. Other than a new power supply absolutely nothing has been changed.
View 7 Replies View RelatedWindows 7 Desktop - Local Area Connection Doesn't Have Valid IP Configuration
Oct 3, 2012Have a Windows 7 desktop connected to a Netgear Router via a cable modem. Computer network is setup a Home Network / Access Type: Internet. Error Message:"Local Area Connection" doesn't have a valid IP configuration. Problem is fixed but the problem starts again the next time I start the desktop. Receive the error message once again.
View 7 Replies View RelatedLocal Area Network Doesn't Have A Valid Ip Configuration Windows 7 32bit
Jul 30, 2012I am using hp pressario C7000 with window 7 32 bits. Can not access the internet. The reports 'local area network doesn't have a valid ip configuration'.
View 1 Replies View RelatedCisco Switching/Routing :: 6509 Convert CatOS Configuration To Native IOS Configuration
Jul 17, 2012I am position to migrate from CatOS 6509 switch to native IOS 6509 switch. long time ago, there was some site to convert automatically based on copy and paste onto the tool, but i can not find.
Does anybody know how to convert CatOS configuration to Native IOS configuration ? It is not IOS change, but it is configuration convert.
D-Link DIR-655 :: Does Auto Configuration Overrides Manual Configuration
Dec 14, 2012I have webcams that need port 8081 opened and I did that, everything worked fine until my DIR655 jammed up and power cycling it and the modem 3-4 times DID not make it work: no internet access and it was definitely a DIR655 problem. So, out with the paperclip to do the big reset, causing me to lose my configuration. When "most" of it came back up with my new config (I had screen prints), all was okay EXCEPT the webcams. Addresses and ports were all configured properly, address was fixed too on the client computer rather than use DHCP. I had a DNS relocation service running (DYNDNS) for the WAN side, but that address (My IP) didn't change either. I tried EVERYTHING. Finally, I realized in all my screwing around that I had enabled UPnP in my application, something I hadn't done before, but did this time as a desperation move. UPnP had always been checked off in the router. So.....I REMOVED my port forwarding and virtual server settings (either one worked before), and voila, everything working, Is this a normal occurrence, that if you have UPnP running, that this auto configuration overrides any manual configuration?
View 2 Replies View RelatedBelkin Routers :: Update F9L1101 N600 DB Wireless Dual-Band USB Adapter From Windows 7 To Windows 8
Nov 25, 2012My new Windows 8 computer is not wi-fi capable, I bought the adapter but it only works with Windows 7, they have a link to upgrade to Windows 8 but I don't know where to go from there.
[URL]
Sharing Kxp1121 From Windows 7 64bit To Windows Xp Pro 32bit
Dec 15, 2011My win xp pro 32bit cannot add network printer kxp1121 from win 7 64 bit which is using epson lx series 1 (80). Request driver ' unknown Inf'
View 1 Replies View RelatedWindows 7 64bit Networking With Windows 2003 32bit?
Apr 18, 2012I wan to access a folder shared on windows 2003 server 32bit from a Windows 7 64bit ultimate WS. but after asking password, beside giving correct password, it asks again and agian and do not show folder
View 1 Replies View RelatedCan't Logon To Windows 2003 From Two Specific Windows 7 Workstations?
Sep 18, 2012We have a network of approximately 20 computers, network printers, and one Windows 2003 Server (used simply as a file server). I have an issue with two specific Windows 7 Pro workstations that just will not logon. The username and password details we're using are correct, but the server rejects them. I can logon using the same account from any other Windows 7 Pro workstation, or Windows XP station, so I know the issue is specific to the two workstations communicating with the server.
Both afftected stations show Logon attempted by: MICROSOFT_AUTHENTICATION_PACKAGE_1_0 error 0xC000006A which all searches on Google point towards incorrect login credentials, however I've tried plenty of perfectly valid login credentials and they don't work either.I've tried checking that the 128bit option on the Windows 7 machines is disabled in file sharing etc.
Cisco VPN :: RV042 Quick VPN Windows 7 64 Without Windows Firewall
Aug 29, 2011I have an RV042 setup for quick vpn access.The remote computer in question is a win 7 64bit. The PC uses McAfee SAAS firewall. This disables the windows firewall.
1. I can connect to the vpn with SAAS disabled and windows firewall enabled.
2. I cannot connect to the vpn with both windows firewall and SAAS disabled.
3. I cannot run SAAS and windows firewall together to check if this would work.
I need to figure out what windows firewall is doing to allow the vpn to connect, and so how do this with windows firewall disabled. I can then leave the windows firewall disabled and enable McAfee SAAS.The message quickvpn provides when it fails to connect is that the remote gateway is not responding. The client logs show that the tunnel had been opened but it was unable to ping.
Dell With Windows Vista Not Connecting To HP With Windows 7?
Sep 8, 2012using same network but don't see each other. Why?
View 2 Replies View RelatedSharing :: Windows Xp Home Cannot Connect To Windows 7?
Dec 31, 2011I have a win xp laptop which connects via wireless to a cheap belkin router I have a Win 7 pro laptop which is hardwired to the router. The Win 7 machine is NOT set up for home groups. We are all on the same workgroup.
I have added the user name from the XP machine to the Win 7 pro machine with admin rights. I shared a folder on Win 7 and added the user name and gave read/write rights. I have no software firewall.
When I try to connect via win explorer via the workgroup I see the Win 7 machine (after 10 seconds). I see 'User' folder which I can browse and I see the folder that I shared but I can't access it. Access denied...
Cisco VPN :: ASA 5510 With Windows XP And Windows 7 VPN Clients
May 10, 2010We have a working configuration for L2TP-IPSec connection from a native Windows XP client to the ASA 5510. When trying to set up a connection from a Windows 7 client, the connection fails with the message that all SA proposals are unacceptable? Is this coexistence possible, and what parameters would I have to change to get this working. I have understood that the Windows 7 client requires som higher security proposals, but have not found what these are. And at the sam time we are concerned about not destroying the VPN connection for our existing XP clients.
View 8 Replies View RelatedPrinter On Windows 98 Shared But Not Seen By Windows 7?
Apr 8, 2011Trying to share printer from old 98 with new 7 machine
View 1 Replies View RelatedWindows 7 Unable To Ping Windows XP?
May 20, 2011My Win7 laptop was unable to ping another WinXP within the same network. When I first got this Win7 laptop, I experienced this problem. The WinXP laptop has no problem pinging the Win7 system. A visiting friend changed the setting on the Win7 laptop and suddenly the two laptops were able to talk to each other. I wiped the WinXP laptop a few weeks ago. Since then, the Win7 laptop is again unable to ping the WinXP. I have googled for many hours now. I tried just about all the methods that make sense to me but still cannot ping from Win7 to WinXP. How I can reestablish communication between these 2 systems on the same network?
View 5 Replies View RelatedCannot See Windows 2008r2 Via Windows Explorer
Apr 20, 2012I have this test windows 2008 r2 server. I can connect to the internet on this server.However my client xp machine, cannot see the server via windows explorer. I can however ping the windows 2008 r2 server. Using the servers ip of 192.168.1.230 Another thing is I cannot also remote to the server on the internal LAN. Using RDP.I ve even tried with firewalls turned off on the server for some mins.
View 1 Replies View Related