Cisco :: LMS 3.2 Archive Management Failing?
Sep 4, 2011config collection is failing.in detail its partial success(config fetch is success but archieve is failed).
View 1 Replies
ADVERTISEMENT
Cisco :: LMS4.2.2 - Cannot Do Archive Management On Nexus 5K
Nov 22, 2012In our organisation we have multiple Nexus 5000 switches, which Cisco LMS 4.2.2 cannot get the running-config and startup-config from with the Archive Management process. When it does try to get them, I get a error as follows:
*** Device Details for SF-DERA-01 ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> TFTP,SSH,SCP
[Code].....
Cisco :: LMS 3.2 / Archive Management And Inventory Collection Failed
Jan 25, 2012we have the following problems with lms 3.2 on windows. Archive management and inventory collection fail.
The following messages we get:
DCMA0055: URN_NOT_FOUND : urn "JRM" : Not found !!
DCMA0077: Could not create job. Check dcmaclient.log for more details.
Someone recommend to remove the following files ctmregistry and ctmregistry.backup.Will this fix the issue?
Cisco :: LMS 3.2 Cannot Sync Archive
Nov 13, 2011we have an LMS 3.2 in which it cannot archive the configuration for a couple of routers. The output is the following:
Failed to fetch the configuration. Check the dcmaservice.log for details. TELNET: Failed to establish TELNET connection to x.x.x.x - Cause: connect timed out.
The issue is that i have configured all devices to be accessed through SSH first and then through telnet. I have tested SSH access from LMS with putty.
Cisco :: LMS 3.2 RME Can't Sync Archive
Jul 8, 2012We have LMS 3.2 software. But the RME module can't running because notification error.
View 4 Replies View RelatedCisco :: LMS 4.2 Configuration Archive Fails?
May 3, 2012I have a not-so newly installed LMS4.2 Linux appliance. Here is my configuration archive summary:
Config Archival Status
No. of Devices
Successful 7 Failed 1338 Partially Successful0 Total1345 Configuration Never Collected 1338
[Code].....
Which seems to mean that SSH does not work, which is false as I manually connects to the device from the LMS host successfully. Network devices access is authenticated against ACS servers using TACACS+ so there should be no problem with credential discrepency here.
Cisco :: LMS 3.2 Sync Archive Is Not Working For WLC
Jun 7, 2013I tried to update Sync-archive for the device but it fails.
View 8 Replies View RelatedCisco :: LMS 3.2 / RME 4.3 - Updating Archive Automatically?
May 6, 2012How can I configure the CiscoWorks to automatically update the config files when a configuration change occurs.
Like in LMS 2.1:
Resource Manager Essentials > Administration > Configuration Management > General Setup
Change Probe Setup
Listen to Syslog Messages
Cisco :: Configuration Archive Sync (LMS 4.0.1)
Jun 21, 2011I have a question about a daily archive sync job. I have the job set to run by device type groups. My question is, when I delete or add devices, will they automatically be added to the job?
View 1 Replies View RelatedCisco :: VG248 Configure Archive Fails?
Aug 25, 2011I beleive in the past these devices could not be managed bij RME config management, but now it says in the supported device table:The following features are supported:Network Topology Layer 2 ServicesFault ManagementInventory CollectionConfiguration Deploy Protocols: TELNET, SSH, TFTP, RCPConfiguration Fetch Protocols: TELNET, SSH, TFTP, RCP.The password and enable pasword are correct and simply work when I try a telnet from the server.The gui is not CLI but menu driven.RME just says:TELNET: Failed to establish TELNET connection to 10.1.1.7 - Cause: Authentication failed on device 3 times. PRIMARY-RUNNING config Fetch Operation failed for TFTP. Could not detect SSH protocols running on the device.
View 13 Replies View RelatedCisco :: 3750 / Configuration Archive Job Times Out (LMS 4.0)?
Oct 13, 2011I've inherited a server running Ciscoworks LMS 4.0 to manage our plethora of switches. Running 'Configuration > Configuration Archive > Synchronization' against a Catalyst 3750 switch called switch1 successfully retrieved the Running, Startup, and VLAN configs.Running the same command the following day on switch1 failed and returned this in the job execution result:Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Admin > Collection Settings > Config > Config Job Timeout Settings I modified the job result wait time setting to be 600 seconds, tried again and received the same timeout failure. I have also seen this same Failed message on other devices, but have never actually received the configs for them, so I feel switch1 is a better place to start.What are the first things I should check in CiscoWorks for a problem like this? Is there a particular software revision I should be on with LMS 4.0? What timeout value should be used for Archive Synchronization?
View 1 Replies View RelatedCisco :: LMS 4.2 Partial Success In Archive Jobs?
Sep 25, 2012I am getting some weir behaviour in my LMS 4.2 setup. I am doing and Archiveupdate job and am receiving a partial success for roughly 1400 devices. Here is some output.
Execution Result:
STARTUP
CM0057 PRIMARY STARTUP Config fetch SUCCESS, archival failed for
xxxxxx Cause: CM0210 Unable to generate
processed config Action: Verify that archive exists for device.
RUNNING
[code]...
I went on and checked the dcmaservice log file.I found the following entry at the same time of this particulair job
ERROR,[Thread-72920],com.cisco.nm.xms.xdi.pkgs.SharedDcmaIOS.analyzer.IOSConfigletRules,loadRules,42,Could not locate configlet rule file : com/cisco/nm/xms/xdi/pkgs/SharedDcmaIOS/analyzer/IOSConfigletRules.ser
[ date taken out ],ERROR,[Thread-72920],com.cisco.nm.rmeng.dcma.configmanager.DeviceArchiveManager,archiveNewVersionIfNeeded,1115,CM0210 Unable to generate processed config
I then searched if I had the IOSConfigletRules.set file on the box. And no it is not there. My question is this the reasson that I have som manny partial sucess archive results?
Cisco :: Sync Archive Failed LMS 3.2 Using TACACS
Mar 18, 2012Iam using LMS 3.2. In short, there is 2 type of router, 2800series and 2900series. These device already join to TACACS server. When I try to sync archive I got:
- failed on 2900series
- successful on 2800series
I have doing same config (credential, snmp, protocol for sync archive), for those device on ciscoworks but why I find the error??
Cisco :: LMS 4.2.2 / Can Exclude Device From Config Archive
Oct 17, 2012I have a number of devices such as Cisco Call Manager, or Cisco Wireless Controllers, etc that I want to remain in DCR but would like to exclude from the Config Archive process. Is there any way of excluding an individual device from this process?
View 3 Replies View RelatedCisco :: LMS 4.1 Config Archive Is Failed For Around 20 Devices
Jul 28, 2012We have LMS 4.1 with more than 150 devices.Config Archive is failed for around 20 device.
11- Cisco VG248 ( Cisco analogue gateway)
7 - Cisco call manager
2 - Wireless Lan controller
For this device- discovery, Inventory Collection ,Fault Discovery, Topology Data Collection ,etc are successfull.
Cisco :: LMS 4.1 Sync Archive Partially Successful On Some Devices
Jan 10, 2012I'm having trouble syncing the config archive for some of my nodes.
I get the error 'partially successful' (see attatched PNG).
I've looked in the dcmaservice.log (also attatched), and I can see the extended error message:
[ Wed Jan 11 09:49:30 CET 2012 ],ERROR,[Thread-2137],com.cisco.nm.rmeng.dcma.configmanager.DeviceArchiveManager,getLatestConfigFileVersion,168,CM0021: Version does not exist in archive $1 Cause: Version may have been deleted
[ Wed Jan 11 09:49:30 CET 2012 ],INFO ,[Thread-2137],com.cisco.nm.rmeng.dcma.configmanager.DeviceArchiveManager,getSysObjectID,425,SYS OID
I would like to check the file structure / permissions, but since I don't know what '$1' refers to, I'm stuck.
Cisco Firewall :: ASA 5520 Configuration Backup With Archive?
Nov 15, 2011On our cisco 3750 switches we can take config backups with the archive command. After every "write mem" it rights the config to our backup server. We would like to do this also for our asa 5520 with version 8.2(2). I also searched in the command reference guide, but I can't seem to find the proper command to do it.
View 2 Replies View RelatedD-Link DIR-825 :: How To Add U-Boot Sources To Provided Archive
Feb 24, 2011The bootloader used by the device is U-Boot, which is also licensed under the terms of the GPL. Sadly these parts are missing from the source code package provided by D-Link. Therefore I am asking you to add the U-Boot sources to the provided archive or post them here in the forum.
View 12 Replies View RelatedCisco :: Prime Infrastructure 1.2 - Unable To Configure Archive Of WLC 5508
Jan 29, 2013I'm trying to do configuration archiving in Prime Infrastructure 1.2 with a 5508 WLC (7.4).The job always fails (Admin -> Background Jobs) with the following error (see attachement):"SNMP: Failed to establish SNMP connection xxxx - Cause: Device is Unreachable. Check the ReadOnly community string." I double checked the SNMP credentials, they do match. For testing I also added a Public community just for the PI. Same result.Am I missing something?Is this not intended for Wireless Controllers?
View 5 Replies View RelatedCisco Switching/Routing :: 3845 - Archive Command Time-period Does Not Work
Oct 14, 2012I have a Cisco 3845 with the archive command configured:
archive
path tftp://x.x.x.x/$h
write-memory
time-period 60
The archive command works with the execution of the write mem, but with the "time-period" doesn't work.This is the show version of my 3845:
NTP_Server#SH VER
Cisco IOS Software, 3800 Software (C3845-SPSERVICESK9-M), Version 12.3(14)T7, RELEASE SOFTWARE (fc2)
Technical Support: [URL]
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Thu 23-Mar-06 01:59 by pwade
[code].....
Home Network :: Can't Install / Extract Any File / Archive Downloaded Through Shared Connection Via LAN
Aug 30, 2011I can't install or extract any file or archive downloaded through shared connection from the 1st PC via a LAN ... tried new LAN and tried switch the LANs but doesn't work always a CRC error when extract an archive or file corrupted when install anything downloaded:this is what I tried so far
-tried download and extract on a 2nd installed windows (I have dual boot) and its same CRC error
-tried another non built-in LAN card pci-E x1 and its the same CRC error
-tried restore bios to default and its same CRC error
-tried putting a laptop on the same line instead of my PC and it works no errors no problems
Cisco :: LMS 3.2 Job Browser Failing
Jan 13, 2011When I select Job Broser I get the following crash, LMS 3.2, server has been restarted but I continue to get the error. [code]
View 4 Replies View RelatedCisco VPN :: 891 - VTI Failing And Not Reinitializing
May 1, 2011I'm running a Cisco 891 it has both crypto maps and ipsec VTI's running on the external interface. The cryto maps are for sites that do not have a cisco router and the Tunnels are for the sites that use crypto maps work perfectly fine. But I much prefer using unnels as it gives a routable interface, ospf works ect.
The tunnel interfaces will periodicly fail (Line protocol down) at no set interval, they will then not come back up again. To bring them back up I either have to shutdown and then re-enable the interface or run "clear cry ses rem *.*.*.*"
Logging with isakmp and ipsec errors provides the following:
55801: *May 1 10:31:16.015: ISAKMP:(0):Can't decrement IKE Call Admission Control stat incoming_active since it's already 0.55802: *May 1 10:31:16.015: ISAKMP:
[Code].....
Cisco :: VRF Collector Job Failing (LMS 4.0)
Nov 29, 2012My VRF Collector job has started failing. I have attached the contents of the vnmcollector.log file after setting debug level to DEBUG.
View 1 Replies View RelatedCisco :: Boot From Tftp Failing?
Aug 5, 2011I've got a fully working 877w that I'm trying to get to boot from tftp, but I just can't seem to get that going.I have a tftp server running and can copy images back and forth without any trouble.I have this in my config:boot-start-markerboot system tftp c870-advipservicesk9-mz.124-24.T2.bin 192.168.1.200boot-end-markerDuring the boot process I get an error message that says there is a missing or illegal ip but I really don't see how that can be as my tftp server is 192.168.1.200 just like my config says.
View 16 Replies View RelatedCisco :: VPN Failing Between Two Pix Devices (DEBUG)
Oct 3, 2012My tunnel had been running fine for a couple of months. Now, not so much.Here is some debug.
View 6 Replies View RelatedCisco WAN :: 1921 IOS Upgrade Failing
Mar 31, 2013Any issues upgrading the IOS on a 921 router.How can i create a certificate for the new IOS? I've never had to do this for other IOS 15 upgrade?I've confirmed the IOS is not corrupt and if i upgrade the router in ROMMON the router boots correctly.
View 1 Replies View RelatedCisco Firewall :: ASA 5520 Not Failing Over
Mar 13, 2013Im preparing a lab and I have 2 ASA 5520's. I have configured them for failover so the Primarys config will replicate over to the Secondary. They are connected via a 3560 switch. the switch ports are configured as access ports on vlan 1. Spanning-tree portfast is enabled
Firewall (Primary)
Cisco Adaptive Security Appliance Software Version 9.1(1) Device Manager Version 7.1(2)
Compiled on Wed 28-Nov-12 10:38 by buildersSystem image file is "disk0:/asa911-k8.bin"Config file at boot was "startup-config"
[Code].....
Cisco :: 871 - LMS 4.1 Software Distribution Failing
Mar 20, 2012I'm currently unable to upgrade certain devices since Cisco Prime incorrect believes there is not enough room in the flash partition.For example.
Getting the following error messsage trying to upgrade some Cisco 871 routers: "Catastrophic - SWIM1200: Selected Flash partition requires minimum (28 MB) to upgrade selected software/image."The images are around 18 MB in size. Why does Cisco Prime thinks its 28 MB in size? Bug?
Cisco Routers :: Failing RV016 Or ISP?
Jan 22, 2010I have a rv016 that's been in 24x7 operation since I bought it a few years back. It is out of warranty. It is connected to three cable modems on WANs 1-3. Behind it are a bunch of PCs getting IPs via DHCP. There is a gateway to gateway vpn tunnel setup on wan3 to a rv082 at another site. There is a forwarding entry for http to an internal http server. Everything else is pretty much default.
The router is primarily used to aggregate bandwidth for uploading large numbers of photos. The systems behind the router initiate the uploads and the router automatically load balances the outgoing bandwidth.
This was all working fine until just recently. The ISP is Knology who is upgrading each of the 8m/768k cable modems to 25m/5m. They are also moving from DOCSIS 1 to DOCSIS 3. They are currently in the middle of this upgrade and have upgraded the modems to DOCSIS 3 as well as the speeds to 12m/2m. The problem is that the rv016 Network Service Detection, which is set to "Default Gateway" indicates that the modems fail randomly. Usually only one will be failed, but up to two will fail the Network Service Detection simultaneously.
Knology insists that there is nothing wrong with their modems. I have removed a modem from the rv016 when Network Service Detection indicates it is in a failed state and connected it directly to a computer. It will work, but it has a different IP address and default gateway. As soon as I connect it back to the rv016, it works there too, but on the original IP address and gateway. I've only tried this test this twice so far, so it is a bit inconclusive.
Speed tests behind the rv016 are the same as directly connected to one of the cable modems. The router works normally as it has for years. Nothing else is acting funny.
So my question is, is the rv016 failing or is the ISP having problems?
Cisco :: LMS 4.2 Backup Failing Randomly
Jun 4, 2012Backup failed on 2012/06/03 at 22:02:52. REASON: Unable to proceed with the backup operation as some files are being accessed by jobs. Reschedule the jobs such that the backup job does not coincide with other jobs.
Randomly the backup for lms 4.2 is failing. it has suceeded but majority of the time its failing. i have tried changing times but nothing seems to work. previously we were running 4.0.1 and had noproblems with the backup time.
Just found the bug
CSCtz29665
URL
SFTP Connection Failing?
Dec 4, 2012I set up a connection from a laptop (Windows 7) that goes through a LAN proxy server to a secure ftp server (Windows Server 2003).The sftp server is assigned a public ip address.I opened the firewall at the destination and allowed port 22 traffic to the sftp server. Well, the connection is failing.I know for a fact the connection from the client laptop is making it to the sftp server.If I issue this command on the client laptop:
telnet sftpserver 22
The DOS screen clears and tells me the type of SSH server I'm connecting to. While this connection is still active, I logged into the destination sftp server and did a netstat command. I can see the address of the proxy server in the "Foreign Address" column of the netstat results. I also can see the proxy server address when I look at the Application Log on the sftp server, so I know the connection is making it to the sftp server.
I beleive the problem is the control port (return traffic) from the server back to the client. Something is being blocked or is misconfigured. I always thought the router negotiated the control port, and that the control port didn't need to be put into any firewalls.
Internet Failing On Certain Devices?
Dec 16, 2012For everybody else in the house the internet works fine on their devices, however, on my laptop and ipod it will often not allow me to connect for ages, but then finally connecting (without me changing anything)
View 3 Replies View Related
