Cisco :: Configuration Archive Sync (LMS 4.0.1)
Jun 21, 2011
I have a question about a daily archive sync job. I have the job set to run by device type groups. My question is, when I delete or add devices, will they automatically be added to the job?
View 1 Replies
ADVERTISEMENT
Nov 13, 2011
we have an LMS 3.2 in which it cannot archive the configuration for a couple of routers. The output is the following:
Failed to fetch the configuration. Check the dcmaservice.log for details. TELNET: Failed to establish TELNET connection to x.x.x.x - Cause: connect timed out.
The issue is that i have configured all devices to be accessed through SSH first and then through telnet. I have tested SSH access from LMS with putty.
View 2 Replies
View Related
Jul 8, 2012
We have LMS 3.2 software. But the RME module can't running because notification error.
View 4 Replies
View Related
Jun 7, 2013
I tried to update Sync-archive for the device but it fails.
View 8 Replies
View Related
Mar 18, 2012
Iam using LMS 3.2. In short, there is 2 type of router, 2800series and 2900series. These device already join to TACACS server. When I try to sync archive I got:
- failed on 2900series
- successful on 2800series
I have doing same config (credential, snmp, protocol for sync archive), for those device on ciscoworks but why I find the error??
View 5 Replies
View Related
Jan 10, 2012
I'm having trouble syncing the config archive for some of my nodes.
I get the error 'partially successful' (see attatched PNG).
I've looked in the dcmaservice.log (also attatched), and I can see the extended error message:
[ Wed Jan 11 09:49:30 CET 2012 ],ERROR,[Thread-2137],com.cisco.nm.rmeng.dcma.configmanager.DeviceArchiveManager,getLatestConfigFileVersion,168,CM0021: Version does not exist in archive $1 Cause: Version may have been deleted
[ Wed Jan 11 09:49:30 CET 2012 ],INFO ,[Thread-2137],com.cisco.nm.rmeng.dcma.configmanager.DeviceArchiveManager,getSysObjectID,425,SYS OID
I would like to check the file structure / permissions, but since I don't know what '$1' refers to, I'm stuck.
View 2 Replies
View Related
May 3, 2012
I have a not-so newly installed LMS4.2 Linux appliance. Here is my configuration archive summary:
Config Archival Status
No. of Devices
Successful 7 Failed 1338 Partially Successful0 Total1345 Configuration Never Collected 1338
[Code].....
Which seems to mean that SSH does not work, which is false as I manually connects to the device from the LMS host successfully. Network devices access is authenticated against ACS servers using TACACS+ so there should be no problem with credential discrepency here.
View 1 Replies
View Related
Oct 13, 2011
I've inherited a server running Ciscoworks LMS 4.0 to manage our plethora of switches. Running 'Configuration > Configuration Archive > Synchronization' against a Catalyst 3750 switch called switch1 successfully retrieved the Running, Startup, and VLAN configs.Running the same command the following day on switch1 failed and returned this in the job execution result:Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Admin > Collection Settings > Config > Config Job Timeout Settings I modified the job result wait time setting to be 600 seconds, tried again and received the same timeout failure. I have also seen this same Failed message on other devices, but have never actually received the configs for them, so I feel switch1 is a better place to start.What are the first things I should check in CiscoWorks for a problem like this? Is there a particular software revision I should be on with LMS 4.0? What timeout value should be used for Archive Synchronization?
View 1 Replies
View Related
Nov 15, 2011
On our cisco 3750 switches we can take config backups with the archive command. After every "write mem" it rights the config to our backup server. We would like to do this also for our asa 5520 with version 8.2(2). I also searched in the command reference guide, but I can't seem to find the proper command to do it.
View 2 Replies
View Related
Nov 15, 2011
We have ASA running code 8.0.4 with Active/Standby for quite long time. Today when we gave the command wri standby it started sync the config to standby ASA but waited forever.when we checked the show failover, we got the following result.
This host: Secondary - Active
Active time: 1928633 (sec)
slot 0: ASA5540 hw/sw rev (2.0/8.0(4)) status (Up Sys)
Interface PERIMETER-MGMT (10.12.8.1): Normal (Not-Monitored)
Interface OUTSIDE (86.36.xx.xx): Normal (Waiting)
[code].....
When we console to Standby ASA and tried to save (wri mem), we got the following error and also please note the hostname has become default...?
ciscoasa(config)# wri memory
Building configuration...
Command Ignored, Configuration in progress...
[FAILED]
and when we tried to give following command we got this error:
ciscoasa(config)# copy running-config startup-config
Source filename [running-config]?
%Error reading system:/running-config (Configuration temporarily locked)
ciscoasa(config)#
I see here the standby ASA IPS module is down, but can that issue cause not sync the config backup and writing to nvram (save config)..?
View 1 Replies
View Related
Jul 7, 2011
I have 2 5508 controllers in a mobility group. Any good way to keep the configuration between the 2 controllers synched up?
I thought about copying the config from my primary controller to the secondary controller, but I would think there is a more elegant way to make this happen.
View 5 Replies
View Related
Sep 4, 2011
config collection is failing.in detail its partial success(config fetch is success but archieve is failed).
View 1 Replies
View Related
May 6, 2012
How can I configure the CiscoWorks to automatically update the config files when a configuration change occurs.
Like in LMS 2.1:
Resource Manager Essentials > Administration > Configuration Management > General Setup
Change Probe Setup
Listen to Syslog Messages
View 1 Replies
View Related
Aug 25, 2011
I beleive in the past these devices could not be managed bij RME config management, but now it says in the supported device table:The following features are supported:Network Topology Layer 2 ServicesFault ManagementInventory CollectionConfiguration Deploy Protocols: TELNET, SSH, TFTP, RCPConfiguration Fetch Protocols: TELNET, SSH, TFTP, RCP.The password and enable pasword are correct and simply work when I try a telnet from the server.The gui is not CLI but menu driven.RME just says:TELNET: Failed to establish TELNET connection to 10.1.1.7 - Cause: Authentication failed on device 3 times. PRIMARY-RUNNING config Fetch Operation failed for TFTP. Could not detect SSH protocols running on the device.
View 13 Replies
View Related
Sep 25, 2012
I am getting some weir behaviour in my LMS 4.2 setup. I am doing and Archiveupdate job and am receiving a partial success for roughly 1400 devices. Here is some output.
Execution Result:
STARTUP
CM0057 PRIMARY STARTUP Config fetch SUCCESS, archival failed for
xxxxxx Cause: CM0210 Unable to generate
processed config Action: Verify that archive exists for device.
RUNNING
[code]...
I went on and checked the dcmaservice log file.I found the following entry at the same time of this particulair job
ERROR,[Thread-72920],com.cisco.nm.xms.xdi.pkgs.SharedDcmaIOS.analyzer.IOSConfigletRules,loadRules,42,Could not locate configlet rule file : com/cisco/nm/xms/xdi/pkgs/SharedDcmaIOS/analyzer/IOSConfigletRules.ser
[ date taken out ],ERROR,[Thread-72920],com.cisco.nm.rmeng.dcma.configmanager.DeviceArchiveManager,archiveNewVersionIfNeeded,1115,CM0210 Unable to generate processed config
I then searched if I had the IOSConfigletRules.set file on the box. And no it is not there. My question is this the reasson that I have som manny partial sucess archive results?
View 2 Replies
View Related
Nov 22, 2012
In our organisation we have multiple Nexus 5000 switches, which Cisco LMS 4.2.2 cannot get the running-config and startup-config from with the Archive Management process. When it does try to get them, I get a error as follows:
*** Device Details for SF-DERA-01 ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> TFTP,SSH,SCP
[Code].....
View 17 Replies
View Related
Oct 17, 2012
I have a number of devices such as Cisco Call Manager, or Cisco Wireless Controllers, etc that I want to remain in DCR but would like to exclude from the Config Archive process. Is there any way of excluding an individual device from this process?
View 3 Replies
View Related
Jul 28, 2012
We have LMS 4.1 with more than 150 devices.Config Archive is failed for around 20 device.
11- Cisco VG248 ( Cisco analogue gateway)
7 - Cisco call manager
2 - Wireless Lan controller
For this device- discovery, Inventory Collection ,Fault Discovery, Topology Data Collection ,etc are successfull.
View 3 Replies
View Related
Jan 25, 2012
we have the following problems with lms 3.2 on windows. Archive management and inventory collection fail.
The following messages we get:
DCMA0055: URN_NOT_FOUND : urn "JRM" : Not found !!
DCMA0077: Could not create job. Check dcmaclient.log for more details.
Someone recommend to remove the following files ctmregistry and ctmregistry.backup.Will this fix the issue?
View 1 Replies
View Related
Feb 24, 2011
The bootloader used by the device is U-Boot, which is also licensed under the terms of the GPL. Sadly these parts are missing from the source code package provided by D-Link. Therefore I am asking you to add the U-Boot sources to the provided archive or post them here in the forum.
View 12 Replies
View Related
Jan 29, 2013
I'm trying to do configuration archiving in Prime Infrastructure 1.2 with a 5508 WLC (7.4).The job always fails (Admin -> Background Jobs) with the following error (see attachement):"SNMP: Failed to establish SNMP connection xxxx - Cause: Device is Unreachable. Check the ReadOnly community string." I double checked the SNMP credentials, they do match. For testing I also added a Public community just for the PI. Same result.Am I missing something?Is this not intended for Wireless Controllers?
View 5 Replies
View Related
Oct 14, 2012
I have a Cisco 3845 with the archive command configured:
archive
path tftp://x.x.x.x/$h
write-memory
time-period 60
The archive command works with the execution of the write mem, but with the "time-period" doesn't work.This is the show version of my 3845:
NTP_Server#SH VER
Cisco IOS Software, 3800 Software (C3845-SPSERVICESK9-M), Version 12.3(14)T7, RELEASE SOFTWARE (fc2)
Technical Support: [URL]
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Thu 23-Mar-06 01:59 by pwade
[code].....
View 1 Replies
View Related
Aug 30, 2011
I can't install or extract any file or archive downloaded through shared connection from the 1st PC via a LAN ... tried new LAN and tried switch the LANs but doesn't work always a CRC error when extract an archive or file corrupted when install anything downloaded:this is what I tried so far
-tried download and extract on a 2nd installed windows (I have dual boot) and its same CRC error
-tried another non built-in LAN card pci-E x1 and its the same CRC error
-tried restore bios to default and its same CRC error
-tried putting a laptop on the same line instead of my PC and it works no errors no problems
View 9 Replies
View Related
Feb 7, 2013
I am having a problem with a Cisco 887M-K9 which keep dropping it sync.I have tried 2 different locations and both time it dropped sync after 15 or minutes where other routers are working fine. [code]
View 8 Replies
View Related
May 8, 2011
i am on pc i want same outlook on mac no delete on main xp pro home office pc. would like to received and send email from new mac book pro: fully synced between both?
View 1 Replies
View Related
Feb 15, 2012
Do you happen to know a software (free) wherein you can manage to change the background wallpaper of all workstations in the network?
View 5 Replies
View Related
Jan 14, 2013
I want to sync some folders of my office computer with my computer at home.Which is the best method to do this? I know one solution is to save the files in the cloud, but I don't want to save my files on any other server.I think another method is to do this with a local ftp server, e.g. on my NAS but is this secure?Are there any other methods or rather is the ftp method a good idea?
View 1 Replies
View Related
Mar 16, 2011
I'd like to sync my laptop to my pc. My pc is connected to the inet via modem, and my laptop through the wifi device connected to the top of the modem. Is it possible to sync the two? I'd like to be able to access both my pc (& my external hard drive connected to my pc) from my laptop. From what I've read, it's not possible unless both computers are on a wireless connection. I'm using Windows XP on my pc, and Windows 7 on my laptop.
View 3 Replies
View Related
Mar 28, 2011
having a little trouble with NTP on my routers + cannot find any decent documentation on this one.
below is a chain of routers in the NTP comms path
Internet Time Source
V
V
[Code].....
View 1 Replies
View Related
May 1, 2011
I know that with the Nexus switches that we must use the management port and the management vrf for services such as NTP, SNMP etc. I have this configured on my 5548 and it still will not sync with NTP. [code]
View 5 Replies
View Related
Dec 4, 2011
I setup one acs v5.3 in one server in NYC and another acs v5.3 in SJC.I want to make the acs.nyc as primary and acs.sjc as the secondary, how do i setup it up?
View 1 Replies
View Related
May 17, 2012
I have a pair of ASA5520, each has a CSC-SSM module, all specs and licences match and the ASA failover between active and passive firewalls works as expected. However, I am unable to get the two content modules to sync. ASA are running 8.4... and attach diagram show cabling. Each CSC-SSM uses it's connected port as a gateway, although I've tried using both primary and standby IP.
When I try to sync the devices as per the Trend Micro instructions I get the error: "InterScan for CSC SSM could not establish a connection with the failover peer device. Please verify network connectivity with the peer and that the peer is functioning properly, then try again."
All interfaces are up/up. I cannot see the other CSC-SSM in either ASA's arp table. Neither CSC-SSM can ping the other, and none of the guides I've found so far details the pre sync config of the CSC-SSMs.
View 6 Replies
View Related
May 16, 2011
sync status is on the device, is what I see trying to connect to my outlook, I had to change laptops and I can't remember how to sync with outlook?
View 1 Replies
View Related