I'd like to sync my laptop to my pc. My pc is connected to the inet via modem, and my laptop through the wifi device connected to the top of the modem. Is it possible to sync the two? I'd like to be able to access both my pc (& my external hard drive connected to my pc) from my laptop. From what I've read, it's not possible unless both computers are on a wireless connection. I'm using Windows XP on my pc, and Windows 7 on my laptop.
View 3 RepliesI am looking for a good software solution to create a Dropbox-like sync between my desktop and laptop. In other words, when I modify the files in a particular folder on one computer I want the changes to be automatically synced to the local disk on the other computer (I don't want to have to be accessing my files from a network share -- I want local access to them once downloaded). If it would be easier to set something like this up through a server, I do have an old computer lying around that could be re-purposed for such a task.
View 2 Replies View RelatedI've recently bought a wdtv live streamer to play all my music and videos.
Firstly, my setup. Wdtv live connected via USB3 to 1tb wd elements hdd. Also connected via rj45 to router. Laptop on same network, but wireless.
My first question concerns transfer rates. When sending any kind of media to the networked drive from my laptop, I'm only getting transfer speeds of about. 2 mb/s. I thought I would get much more than this as when the wdtv streams to my iPad, it will need faster speeds than this.
The second question is just to make my life easier. Is there any way I can set up folders on my laptop to automatically sync with a chosen folder on the networked hdd? Just to save any effort on my part really
What I want is if I import a cd using iTunes into my library, it will automatically see it and copy it across to the hdd so I can play it over the network.
As an aside, would it be easier to store my whole iTunes library just on the networked drive?
Recently I've been working with the ACS 5.2 (Installed on VMWare). At the beginning I was using a Win Server 2003 Enterprise edition AD, and there was no problem with the AD and the CA Authority. Because some of my customers use Win Server 2008 I change the AD platform to Win Server 2008 Enterprise edition (x64).I don't really have a great experience with Win Server Platforms and, for what I've seen, the Win Server 2003 Services deployment is easier than the Win Server 2008 is.
So, when I used the Win server 2003 I could not only synchronize the ACS with the AD but also use some groups created on the AD to perform the Network Access Authentication. When I try to do the same with the Win Server 2008 AD the ACS and the Server get Synchronized but when I want to add the groups for the Authentication purposes there is no one, absolutely nothing... so I cannot do any test.Also I looked for information about the compatibility between the ACS 5.2 and the Win Server 2008 platforms and at the end the platforms are compatibles.
Domain support with these operating systems seems to be hit and miss.I have 11 computers connected to a domain and I was wondering what the best way to back up the files on the workstations to the server would be. The server has a mirrored raid array and online backup as well. Just checking to see what the best way to do this would be. I am having trouble with the offline files sync / online files sync with these operating systems.
View 1 Replies View Relatedi am on pc i want same outlook on mac no delete on main xp pro home office pc. would like to received and send email from new mac book pro: fully synced between both?
View 1 Replies View RelatedDo you happen to know a software (free) wherein you can manage to change the background wallpaper of all workstations in the network?
View 5 Replies View RelatedI want to sync some folders of my office computer with my computer at home.Which is the best method to do this? I know one solution is to save the files in the cloud, but I don't want to save my files on any other server.I think another method is to do this with a local ftp server, e.g. on my NAS but is this secure?Are there any other methods or rather is the ftp method a good idea?
View 1 Replies View Relatedwe have an LMS 3.2 in which it cannot archive the configuration for a couple of routers. The output is the following:
Failed to fetch the configuration. Check the dcmaservice.log for details. TELNET: Failed to establish TELNET connection to x.x.x.x - Cause: connect timed out.
The issue is that i have configured all devices to be accessed through SSH first and then through telnet. I have tested SSH access from LMS with putty.
We have LMS 3.2 software. But the RME module can't running because notification error.
View 4 Replies View Relatedsync status is on the device, is what I see trying to connect to my outlook, I had to change laptops and I can't remember how to sync with outlook?
View 1 Replies View RelatedI have a Nas4Free (FreeBSD) server on location A and another Nas4Free server on location B.
I need to regulary access to location B's some folder from Windows machine at location A. What is the best scenario for this?
I think to rsync those folders/files every night to location A, but then I think what if in the future there are many other locations (C, D, E, F) that need to be rsynced to location A, that will make location A need a very large harddisk space that maybe not available in the market or limit
by the hardware/BIOS support.
I tried to update Sync-archive for the device but it fails.
View 8 Replies View RelatedI am having a problem with a Cisco 887M-K9 which keep dropping it sync.I have tried 2 different locations and both time it dropped sync after 15 or minutes where other routers are working fine. [code]
View 8 Replies View RelatedI have a question about a daily archive sync job. I have the job set to run by device type groups. My question is, when I delete or add devices, will they automatically be added to the job?
View 1 Replies View Relatedhow do i get a mac g3(old) to see my windows 7 system. my windows 7 can see my mac but ican not get the mac laptop to see the win 7 desktop. i need to be able to get the mac to use the win dvd drive to load mac osx(no cd/dvd drive in the mac).running mac os9.2 on mac currently, would like to upgrade, i have the mac osx disk.
View 1 Replies View RelatedI have an issue whereby my Windows 7 (Professional 32bit) Toshiba Satellite Pro laptop is losing its ability to resolve DNS when connected wirelessly to my BT Homehub (combined ADSL modem/wireless router). I have had the same laptop and Homehub for over two years and this has only started happening in the last couple of weeks. I cannot pinpoint any h/w or s/w changes that have been made and could account for this behaviour.When the issue occurs (typically after 15-30 minutes of normal internet browsing) I can no longer view web sites or ping, for example, www.google.com. I can, however, ping the Homehub and localhost by ip address. Some other non DNS-reliant services such as Skype, email etc may continue to work also.The only way I have found to reliably regain working DNS is to restart the laptop. Other attempts, such as disabling/enabling the NIC releasing/renewing IP and flushing DNS cache have no effect.
- disabling all AV/firewall software - the problem remains.
- Several restarts and finally a full factory reset of the Homehub - no joy.
- uninstalled/reinstalled the wireless NIC (Realtek RTL8191SE) and made sure I have the latest drivers.
- Removed all other devices from the network to ensure there is no IP clash.
- Laptop rolled back to a known good restore point.
I have an XP laptop on the same wireless network that does not suffer from this issue, so I know the actual connection is not at fault. I use the Windows 7 laptop on another wirelsess network (at work) and it is rock solid for 8 hours +. So, it looks to be something specific to the combination of the BT Homehub and the Win 7 laptop.Worth noting, before anyone suggests doing so, the wired NIC on the Windows 7 laptop does not work so I am unable to connect directly to the Homehub with an Ethernet cable.By default the laptop is set to obtain its DNS servers and ip address from the Homehub via DHCP � the resultant ipconfig looks like this:
C:Users
lennox>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : GLOWZ9297647K
Primary Dns Suffix . . . . . . . : internal.rmplc.net
Node Type . . . . . . . . . . . . : Hybrid
[code]....
I have a XP home SP3 as a server. My wired pc's all can see and connect to the server. I am now trying to add the wireless laptop running 7 Home. I can see my wired 7 Ultimate in the network window. I cannot see my server running XP.
View 1 Replies View RelatedMy windows 7 wireless laptop does not see my XP desktop computers (hard wired to my router). My windows 7 wireless laptop can access the internet via the 2.4gh band of my new dual band router.
My XP desktop computers can see my windows 7 wireless laptop and access shared files.
I just upgraded to a new dual band router. The prior router was a single band and my windows 7 wireless laptop could see my XP desktop and access shared files.
how I get my windows 7 wireless laptop to be able to see my wired XP desktop computer?
I am trying to set up a ICS on widows 7 through my laptop. My LT has 2 Adapters. One Ethernet and one wireless. I am plugging in through the Ethernet.I am to trying to set up ICS for my iPhone and iPad. When I set up the ICS my iPhone picks up the network but says it is unable to connect after typing in the pass.I have enabled sharing. I then went and turned security off. Tried connecting again and it allowed me To connect. It says I was connected but my iPhone says it is on 3G.
View 2 Replies View RelatedI am trying to sync the vizio wireless tv to the router. I need the security code for the ubee router?
View 1 Replies View RelatedMy desktop PC don't have the opportunity to make sync between the computer and my phone, (Samsung Galaxy SII ) via Wi-Fi. There is no Wi-Fi in my Desktop PC, and I use cable to the Internet.so that they can talk to each other via Wi-Fi connection.
View 3 Replies View RelatedHow do I resync my wireless microsoft keyboard and mouse. I just switched out my power supply unit and now my keyboard and mouse is not working. It is a model 3000 and has a white usb receiver
View 1 Replies View RelatedAfter the upgrade in v1.00.16 Annexe A, I've a problem ADSL sync with the WAG120N, the router don't need the sync, how to back the v1.00.12 Annexe A.
View 1 Replies View Relatedhaving a little trouble with NTP on my routers + cannot find any decent documentation on this one.
below is a chain of routers in the NTP comms path
Internet Time Source
V
V
[Code].....
I know that with the Nexus switches that we must use the management port and the management vrf for services such as NTP, SNMP etc. I have this configured on my 5548 and it still will not sync with NTP. [code]
View 5 Replies View RelatedI setup one acs v5.3 in one server in NYC and another acs v5.3 in SJC.I want to make the acs.nyc as primary and acs.sjc as the secondary, how do i setup it up?
View 1 Replies View RelatedIam using LMS 3.2. In short, there is 2 type of router, 2800series and 2900series. These device already join to TACACS server. When I try to sync archive I got:
- failed on 2900series
- successful on 2800series
I have doing same config (credential, snmp, protocol for sync archive), for those device on ciscoworks but why I find the error??
I have a pair of ASA5520, each has a CSC-SSM module, all specs and licences match and the ASA failover between active and passive firewalls works as expected. However, I am unable to get the two content modules to sync. ASA are running 8.4... and attach diagram show cabling. Each CSC-SSM uses it's connected port as a gateway, although I've tried using both primary and standby IP.
When I try to sync the devices as per the Trend Micro instructions I get the error: "InterScan for CSC SSM could not establish a connection with the failover peer device. Please verify network connectivity with the peer and that the peer is functioning properly, then try again."
All interfaces are up/up. I cannot see the other CSC-SSM in either ASA's arp table. Neither CSC-SSM can ping the other, and none of the guides I've found so far details the pre sync config of the CSC-SSMs.
Ive just installed Windows 7 on my PC and created a homegroup with the wizard but my laptop isnt detecting the homegroup so i cant "join" it.
My pc is wired to the router and my laptop is wireless.
I have been atte;ting to connect to m home wifii but all it says is "cannot connect" I can see the connection then once i attempy to connect it disappears and i must restart to try again. I tried turning wifii off and on again on the laptop.I checked the password on another device and I am entering it correctly. Ive reset the IP address and reset the router.
[code]...
My HP laptop with windows XP OS will not connect to the internet as long as the local network connection is connected, this trend just started recently, the local network is connected to two Toshiba Cash registers for Polling/ price changes.
View 19 Replies View Relatedmy new laptop is not detecting my modem.its windows7 os
View 1 Replies View Related