I have a XP home SP3 as a server. My wired pc's all can see and connect to the server. I am now trying to add the wireless laptop running 7 Home. I can see my wired 7 Ultimate in the network window. I cannot see my server running XP.
View 1 RepliesI planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View Relatedi've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
i am facing the same problem now but am using windows 2003 server
View 1 Replies View RelatedI have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies View RelatedIs there an iTunes Server for WHS 2011 available?
View 3 Replies View RelatedAfter getting New Workstations, I wanted to connect that to the SERVER but Windows 7 could not log into domain of our server with Windows Server 2003. Besides following the proper process/steps. I am able to use the printer and internet shared through SERVER though.
View 2 Replies View RelatedI've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
I know the best thing one should do is install an ISA server and an Active Directory Domain Controller on separate servers. But for some reason, I want to configure my Windows Server 2003 as an ISA server as well as an Active Directory Domain Controller. What can happen to my server making it run improperly. For example, my ISA server will function mainly as a Firewall, I wonder if all the rules I create in ISA server determine what I mean it should work or I have to consider any affection from Active Directory DC to those rules?I have to ask this question because I've already installed both ISA and AD DC on my Windows Server 2003, already created an Allow. All rule (just for testing connection) in ISA server but I can't ping from all the clients to my server, all the clients can ping each other and the server itself can ping to all clients. I just think that may be the affection from AD DC to my AllowAll rule in ISA server.
I successfully created some rules that worked greatly as they should work but when I hadn't installed AD DC yet (just installed ISA), however right after installing AD DC, it still worked well (this made me think that AD DC didn't affect to how ISA works). Then I configured a little related to DNS server, and maybe something I don't remember exactly and now I can't ping from my client PC to my server. My network is virtualized using VMware 8 workstation and GNS3, at first there is no need of GNS3 because I just want to test my internal network (some clients connected to the internal interface of ISA server). Depending on VMware that I can't be sure if it is some fault of VMware or any other thing but my configuration on the servers.
I have Call Of Duty installed on 2 desktop computers and a laptop.When I make a multiplayer LAN server on one of the desktops, the other desktop finds it but the laptop can't. So I don't know if the laptop is simply only connected to the internet, and the network is only on the two desktop computers, or if they have to be connected to the network to be connected to the internet (so the laptop is connected to the network, and there's a totally different problem going on), or what.Assuming that I just need to connect the laptop to the network, should/can I add it to the network between the two desktops, or do I need to make a totally separate network for it, or what? And how do I do it?
View 1 Replies View RelatedI've got this problem about accessing a file server in my work office.
First, I used to have a desktop PC connected via ethernet cable to a wireless router (there's only one connection in this office but there are two of us, so we set up a router), and I was able to acces the file server by typing "\SERVERNAME" in the RUN command windows. I brought my laptop and I connected it to the router via wireless. After I tried accessing the server the same way I used to (typing "\SERVERNAME") but I got the "Windows cannot acces \servername". Well, I said, I'll try by connecting via ethernet cable, but I couldn't connect either. The only way I can access is by disconnecting the internet cable off the router and plugging it in my laptop's ethernet port. But the issue is that we've only got one connection and some other people connect wirelessly too. I can't understand why if connecting an ethernet cable to the router's LAN port, I was able to access the server from my desktop computer but when I tried the same way from my laptop I could not.Internet connection works fine in my laptop. Networks settings are ok i think. My laptop has Windows 7 and my desktop has Win XP.
my laptop is re-staring when access the server
View 1 Replies View RelatedMy laptop connects wirelessly via router to RoadRunner/internet and work well.I want to physically (ethernet) connect my laptop (via it's docking station) to a print server and then in turn to a printer."link" light is on, on print server however "pinging" 192.168.0.10 (factory default) fails.
View 9 Replies View Relatedhow do i get a mac g3(old) to see my windows 7 system. my windows 7 can see my mac but ican not get the mac laptop to see the win 7 desktop. i need to be able to get the mac to use the win dvd drive to load mac osx(no cd/dvd drive in the mac).running mac os9.2 on mac currently, would like to upgrade, i have the mac osx disk.
View 1 Replies View RelatedI have an issue whereby my Windows 7 (Professional 32bit) Toshiba Satellite Pro laptop is losing its ability to resolve DNS when connected wirelessly to my BT Homehub (combined ADSL modem/wireless router). I have had the same laptop and Homehub for over two years and this has only started happening in the last couple of weeks. I cannot pinpoint any h/w or s/w changes that have been made and could account for this behaviour.When the issue occurs (typically after 15-30 minutes of normal internet browsing) I can no longer view web sites or ping, for example, www.google.com. I can, however, ping the Homehub and localhost by ip address. Some other non DNS-reliant services such as Skype, email etc may continue to work also.The only way I have found to reliably regain working DNS is to restart the laptop. Other attempts, such as disabling/enabling the NIC releasing/renewing IP and flushing DNS cache have no effect.
- disabling all AV/firewall software - the problem remains.
- Several restarts and finally a full factory reset of the Homehub - no joy.
- uninstalled/reinstalled the wireless NIC (Realtek RTL8191SE) and made sure I have the latest drivers.
- Removed all other devices from the network to ensure there is no IP clash.
- Laptop rolled back to a known good restore point.
I have an XP laptop on the same wireless network that does not suffer from this issue, so I know the actual connection is not at fault. I use the Windows 7 laptop on another wirelsess network (at work) and it is rock solid for 8 hours +. So, it looks to be something specific to the combination of the BT Homehub and the Win 7 laptop.Worth noting, before anyone suggests doing so, the wired NIC on the Windows 7 laptop does not work so I am unable to connect directly to the Homehub with an Ethernet cable.By default the laptop is set to obtain its DNS servers and ip address from the Homehub via DHCP � the resultant ipconfig looks like this:
C:Users
lennox>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : GLOWZ9297647K
Primary Dns Suffix . . . . . . . : internal.rmplc.net
Node Type . . . . . . . . . . . . : Hybrid
[code]....
My windows 7 wireless laptop does not see my XP desktop computers (hard wired to my router). My windows 7 wireless laptop can access the internet via the 2.4gh band of my new dual band router.
My XP desktop computers can see my windows 7 wireless laptop and access shared files.
I just upgraded to a new dual band router. The prior router was a single band and my windows 7 wireless laptop could see my XP desktop and access shared files.
how I get my windows 7 wireless laptop to be able to see my wired XP desktop computer?
I'd like to sync my laptop to my pc. My pc is connected to the inet via modem, and my laptop through the wifi device connected to the top of the modem. Is it possible to sync the two? I'd like to be able to access both my pc (& my external hard drive connected to my pc) from my laptop. From what I've read, it's not possible unless both computers are on a wireless connection. I'm using Windows XP on my pc, and Windows 7 on my laptop.
View 3 Replies View RelatedI am trying to set up a ICS on widows 7 through my laptop. My LT has 2 Adapters. One Ethernet and one wireless. I am plugging in through the Ethernet.I am to trying to set up ICS for my iPhone and iPad. When I set up the ICS my iPhone picks up the network but says it is unable to connect after typing in the pass.I have enabled sharing. I then went and turned security off. Tried connecting again and it allowed me To connect. It says I was connected but my iPhone says it is on 3G.
View 2 Replies View RelatedI use a Buffalo Nas LinkStation WXL server to back up my files and data. It has been working perfectly and we have saved some files and data in it.However, we turned it on one day and it had disappeared from the list of Computers on the network and for a while now we haven't been able to get in. It is not showing in the list of Computers in Network and its webpage keeps coming back as "Unable to Connect" or "Taking to Long to Respond".The server is visible on the router's webpage under DHCP Clients List and we can ping the server and get a reply. But none of the laptops on the network can view it neither can I (the administrator) get access to it via its webpage?
View 1 Replies View RelatedMy friend and I bought Acer Aspire 5741's about 9 months ago and neither of us has had any problems until now. My friend went to connect to the internet via wireless router yesterday to find that there was limited connectivity (no internet access). We assumed it was a router issue and I gave her a number of things to check but all seemed ok with it. I went to her house to look at it today and when I ran the connection troubleshooter got "windows can't communicate with.......... (DNS server)". I connected my laptop via her router and everything was fine. I brought her laptop back to my house and tried to connect to the internet via my router and got exactly the same 'DNS' message - my laptop again connected without any problem.
I have re-booted the routers, laptops, network adapters etc and also checked the wireless adapter settings on both laptops, which appear to be the same. I have re-set the TCP/IP stack and have also tried ipconfig /release and /renew - none of which seems to have made any difference. The results of ipconfig/all are:-
Windows IP Configuration
Host Name . . . . . . . . . . . . : Debbie-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
I am running a small network of 30 pc. I have installed windows server 2003. Now i want to upgrade it to server 2008 but before that i want to test windows server 2008. That is why i,m looking online for a copy of windows server 2008 with reg key. Is there any good and trusted place to get windows server 2008.
View 1 Replies View RelatedI am working remotely & unable to access my company's 'ftp server'. The 'box' stated "NO SUCH INTERFACE SUPPORTED'. I have just bought a new Acer laptop & it'll be a complete waste if I can't use for work.
View 4 Replies View RelatedI have a dedicated windows server 2008 r2 enterprise.I am running an SSTP VPN but only have 2 IP address to connect to the internet on.My issue is that one of the IPs is for the IIS7 etc and the other is for VPN use.How can I apply the same IP to more than one user allowing them to connect all at one.There are in total about 5 users who want to use the VPN service and I dont really want to pay.How do I apply the same IP to all accounts and allow them to connect and all use the same IP at once.
View 5 Replies View RelatedI have a new computer with windows 7. Will be terminal for a server using xp.My computer detects the server but I do not succeed to access with username and password.
I have done the following:
Changed workgroup name to same as the rest of the terminals.Changed computer name to same as my previous computer in the network.Previous computer read only chosen username (+ password) when accessing.This new computer reads both computernamechosen username (+ password) when trying to access.
I suspect that username is not approved due to "double-name" ?
I've setup the vpn on my Windows Server 2008 R2 box, I now need to do the firewall part - whats the easiest way of doing this as I can see there is a VPN Wizard on the PIX, or can I just open up the ports on the firewall?
View 6 Replies View RelatedIve just installed Windows 7 on my PC and created a homegroup with the wizard but my laptop isnt detecting the homegroup so i cant "join" it.
My pc is wired to the router and my laptop is wireless.
I have been atte;ting to connect to m home wifii but all it says is "cannot connect" I can see the connection then once i attempy to connect it disappears and i must restart to try again. I tried turning wifii off and on again on the laptop.I checked the password on another device and I am entering it correctly. Ive reset the IP address and reset the router.
[code]...
My HP laptop with windows XP OS will not connect to the internet as long as the local network connection is connected, this trend just started recently, the local network is connected to two Toshiba Cash registers for Polling/ price changes.
View 19 Replies View Relatedmy new laptop is not detecting my modem.its windows7 os
View 1 Replies View Relatedi want to execute my project in lan so i need ip address in laptop.
View 1 Replies View RelatedI have a laptop computer with windows 7 and I want to add a security code.
View 1 Replies View Relatedi cannot connect the wireless net work , but wire though can possible
View 1 Replies View RelatedI have 4 Win 7 comps and 1 XP laptop. The XP laptop can see all the comps on the network, but when I click on any of them it comes up with a login & password prompt. I never set up any network password on any of the PCs, 7 or XP. I tried the standard username/password for the comp I was trying to access & the pc I was using and every other combo I could think of. What password is it asking for?
View 1 Replies View Related