Ping Server But Can't View It On Any Laptop On Network
Feb 28, 2012
I use a Buffalo Nas LinkStation WXL server to back up my files and data. It has been working perfectly and we have saved some files and data in it.However, we turned it on one day and it had disappeared from the list of Computers on the network and for a while now we haven't been able to get in. It is not showing in the list of Computers in Network and its webpage keeps coming back as "Unable to Connect" or "Taking to Long to Respond".The server is visible on the router's webpage under DHCP Clients List and we can ping the server and get a reply. But none of the laptops on the network can view it neither can I (the administrator) get access to it via its webpage?
View 1 Replies
ADVERTISEMENT
Nov 14, 2012
I'm having an HP laptop with windows 7 installed on it, but cannot view available wireless network. under network and settings i can see the wireless network card, which means the wireless drivers has been installed. but can't view my wireless network but other computers are viewing my wireless network.
View 1 Replies
View Related
Jun 19, 2012
We have a new building coming online. It is a layer 3 connection (OSPF) between our core and this building. I have a handful of VLANs configured at this building (using VTP) and I'm having a problem with only 1 of them (the printer VLAN).From the print server (a virtual machine who's host is directly attached to our core switch - a Cisco 6509), I can NOT ping any of the printers at the remote building. But I can ping the gateway for that vlan (which is on the L3 switch/router for the building - a Cisco 3750X).However, if I put a laptop on that vlan at the building, I can ping the print server as well as the other printers.
I ran a traceroute from the print server to the printer's IP address and after hitting the building's router, the requests just started timing out.
I double, triple, and quadruple checked the laptop and printer configurations. In my troubleshooting,I even created a DHCP scope and added the ip helper-address to the interface vlan. My laptop, connected to a switchport on that vlan received the IP address, DNS server info, etc. from the DHCP server (which is on the same vlan as the print server). From my laptop, I could get to all of our internal web servers. I configured the firewall to allow that IP range internet access, and had full internet access on my laptop.But still, I could not ping my laptop or the printers from the print server.
No change in the traceroute.
I then created a vlan interface on the access layer switch (a stack of Cisco 2690Ss) that the printers and my laptop were connected to.From the print server I *could* successfully ping that vlan interface.Traceroute went right to it (3 hops from print server - core switch, router at building, vlan interface on distribution switch).But I could still not ping the laptop or any printers from the print server.
I even wiped out all config related to this vlan - the vlan interfaces on the distribution switch and the L3 switch, deleted the vlan itself, the router network statement, etc. Then rebuilt it all over again.Same results. I've compared every line of config for this vlan to other vlans where this problem is NOT occurring and can find no difference.
View 6 Replies
View Related
Dec 22, 2012
I have been accessing my webmail account everyday for the past 3yrs with not problem until this week. Stopped working mid week. No changes to computers. Have 3 and none will access this site any longer. Just times out. Sometimes I can ping and other times not. Can log onto other networks and access with out any problems. My ISP says it is not their problem. (Site is [URL]).
View 1 Replies
View Related
May 7, 2012
I have a wired desktop PC (HP dx2480) running XP SP3 connected to a LinkSys Wireless 4-port router, and a laptop (Lenovo X61) running XP SP3 connected wireless to the same home network (192.168.0.x). The LinkSys connects by cable to a DSL router for internet access. Both PC and laptop get DHCP IPs from the Linksys (which I have hard-coded - mapped MAC to IP). They are on the same Windows Workgroup "HOME". Both Desktop and Laptop have same Windows User Logins. My desktop had a virus attack (trojan), which I removed and re-installed XP SP3 (from HP disks). Since then the PC seems to have "network sharing and discovery issues" on the network.
- The wired PC CAN ping the laptop, but laptop CANNOT ping PC.
- Both laptop and PC CAN access the internet.
- The laptop and PC COULD NOT see each other on Windows Workgroup, or see shares. This got resolved once I added IPX/SPX/NetBios Protocol on both the wired and wireless NICs on both PC/laptop respectively. NOTE: Before adding this protocol, I double-checked that File-Printer Sharing was enabled on both NICs, Windows Firewall had File-Print Sharing as exclusion. I tried everything including disabling firewall on both, disabling McAfee scanning on both, disabling Firewall on Linksys, but nothing worked.
- The laptop CAN see the NAS (Seagate GoFlexHome - connected by cable to LinkSys) using Seagate Dashboard software and direct IP. The PC CANNOT access the NAS using the Dashboard software but CAN access through direct IP. The NAS is named "goflex_home", which both can discover as \goflex_home from explorer.
- The laptop CAN see ITunes Home Share from a NAS, but the PC CANNOT see any home shares on the NAS (or from the laptop). I even added Home Sharing TCP/UDP ports as exceptions on the Firewall on the PC, but it still doesn't work.
- Some blog checking the node type on IP addresses given by DHCP. The laptop has Node Type "Hybrid", and the PC has "Unknown". I even went to PC regedit.exe and modified the and Change EnableProxy to 0 or 1 (instead of 2 that was in the PC as default).
- I have used SG TCPOptimizer on both laptop and PC to revert to Windows default?
View 5 Replies
View Related
Apr 20, 2011
i have a new smc router and my local ip address and remote ip addresses are very similar. The remote ip address is updating my dns server but i am unable to ping it. Its something like 122.61.xxx.1 ?
View 8 Replies
View Related
Feb 20, 2013
I currently have 2 e4200 wireless routers. The first router is connected to 3 devices via ethernet, and the 4th port is connected to my other e4200v2 which is set as bridge mode. The main router is at one end of the house, the second bridge mode router is at the other end.My wireless devices are connected to the main e4200v2, along with all the wired clients.
When wirelessly connected to the 2nd e4200 (the bridged one) I cannot connect to or ping any wireless clients that are connected to the main router. (For example, in my bedroom I am connected with my computer to the 2nd bridged router, and I am trying to ping my other computer that is wireless connected to the main router. I am unable to ping to this computer. When I am conected wirelessIy to the mian router, than I am able to ping the other wireless computer on the same router. Note:I am able to access any hard wired devices to the main router, regardless of which router I am connected to. The issue only appears to be when trying to connect to a wireless device that is connected to a different router than the device I am connecting from.Both routers are setup on the same subnet mask with firmware Ver.2.1.39.145204
View 9 Replies
View Related
Nov 29, 2011
I'm trying to transfer filed from my laptop to my pc but I'm having problems. First of all both comps are running on windows 7 64 bit. Its weird because out of the 4 computers I have in the house, all of them can see each other EXCEPT my laptop, which cant be seen by any other computers, and when I'm on the laptop I can't see any others.I setup a home network with pass protect off, sharing on etc... on my laptop and no other computer can see it. I think somethings up with the connection though. On this computer I'm on right now, my connection sais "network" and not my actualy connection name. On my laptop, (I have a ethernet plugged in, wireless works also, tried both) when I'm connected it sais Bell~ (my internet name). So my laptop shows my internet name even when its connected through ethernet, but my desktop sais network, not the name
View 18 Replies
View Related
Jan 26, 2012
I installed window server 2003 in a old Pentium III server as a standalone test server. Now I want to use it as a print server and connected it to the domain. I can ping workstations and other servers from that test svr. But i cannot ping that test server from the work stations.
View 2 Replies
View Related
Jan 21, 2012
My laptop is an HP zv6000"Pavillion" running XP SP3. I can't veiw any wireless networks in network connections thought the laptop is sitting next to it. I have tried putting in a preferred network, both secured and unsecured changing settings on my router as I went. I tried various settings including WPA-PS2 which is in the network connections. I have the wireless turned on WLAN is on.
View 1 Replies
View Related
Jul 15, 2011
I have an office server set up to about 10 computers. We hired 4 new people and had to set up their computers on our network. Set up was easy and quick as usual. But when I was done, the other computer users, and even the new ones were complaining about not being able to access the DEFCON5 (name of our server) folder to get what they needed. Basically the only workstations that show up when I click Network are the computers I added the other day, and the computer that is used more than any other computer (the CEO's). We can still access the files by typing the location as \DEFCON5****** and find what we need. But not everyone at my office is computer savy (no body is) and I would like to not have to keep running around and showing everyone this.
View 1 Replies
View Related
May 21, 2012
how to view what is displayed on xpclient on server 2003
View 1 Replies
View Related
May 30, 2011
I have deployed 7 appliances 5.2.0.26.4 CSACS-1121-K9 whose 6 are performing AAA authentications while the last one is is the primary and is the master for configuration and log collector.
Since this morning, I cannot access anymore the view where I can see all Radius authentication for today. I obtain the following message:The server workspace storage for on demand transient reports is full, please try again later or contact administrator to increase on demand transient report storage capacity?
Moreover, if I generate other report, I have the message:18002: iPortal generate report failed.I could find some information which makes references to a Cisco bug CSCtb98071, as below:
Launching a shared report in the ACS 5.1 Monitoring and Report Viewer displays an iportal error for a particular scenario.
#Symptom: You will see the following iportal error message when you launch a shared report:
#iPortal generate report failed.
#
#Conditions: This error occurs when you add a report to a group in the interactive viewer and save it as a shared report.
#Workaround: Avoid using the option Add Group from the interactive viewer for hyperlinked column entries when you save the report as shared
However, I am not adding any report to any group, so I don't understand why this error appears and how to solve it.
View 8 Replies
View Related
Jun 5, 2012
why does my laptop not even show any view wireless networks.In the wireless connection status box, it only says properties, disable but where it should say view wireless networks there is nothing! It is blank. Why is this? And how do I get it to view my wireless networks? I have tried a wireless usb adapter which I use for my other laptop. That usb adapter is comptabile with both WEP and WPA and the computer does not pick up the software. I don't know what else to do.
View 5 Replies
View Related
Sep 29, 2011
i am facing the same problem now but am using windows 2003 server
View 1 Replies
View Related
Apr 12, 2013
I am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80 .... 85. The screen has only the option for 1 video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?
View 5 Replies
View Related
Jan 4, 2012
in another location from my desktop that is only using my wired network, or do they both have to have wireless? I say this cause under those conditions i noticed that with my net book next to my desktop i am able to share files with one being wired and the other being wireless.
View 1 Replies
View Related
May 6, 2012
How to view all network traffic on your router not just your computer? Using wireshark. Window 7 and Ubuntu.Without using any enhancements like airPcap or Turbo cap.
View 4 Replies
View Related
Jan 18, 2011
i want to view computer screens on my network how can i do this without them knowing?
View 3 Replies
View Related
Nov 10, 2011
We have in host webserver that hosts several website, Outside our network i can view each and everyone of them just fine. However inside our network I can't view any of them. I'm able to ping each site by both ip and by name. I just can't displayed them. I've loked into the DNS and everything seems fine there. We tried hard coding the sites into our host files but we still can't pull them up.
View 2 Replies
View Related
Dec 30, 2012
I have several network cameras within my home. Some are Panasonic. How can I view the image without using their cgi. I just want to view the camera image within my security program. How can I do this?
View 1 Replies
View Related
Apr 24, 2011
my laptop is conneted to the internet everything works,is there a way to show what the 8 characters are?(win xp)......for instance with win 7 there is simply a box to check that says SHOW CHARACTERS
View 5 Replies
View Related
Apr 28, 2011
I have a DIR655 and I used to get to see my website from within my network. After a recent crash, I can now only see my website from outside my network.
View 11 Replies
View Related
May 31, 2011
I am unable to view windows 7 HP systems in my network places on a windows server 2003 domain. How do I rectify this?
View 3 Replies
View Related
Feb 26, 2013
i want to know if someone here know how to observe the network performance? and u know what kind of software that can do the observation on the network performance?
View 6 Replies
View Related
Jan 4, 2012
I have a new apple airport extreme wireless router and have done all the port forwarding and gave the camera a static address and cannot view my camera outside my network. I also have done the dyndns service also. I will note if I change the http port in the camera settings to say 82 I get a black screen and cannot view my camera till I switch back to port 80. Reason why I want to do this is I need to view my camera for more then 60 seconds.
View 5 Replies
View Related
Apr 19, 2012
I have a camera set up in my kitchen and it works and I can view it in our house, on other computers or my iphone. But I can't view it from my work or anywhere outside our wireless range.It is a DCS-920. I have opened port 80, and checked it with a port checker and it says its open. I have bell as a provider with a 2 wire 2701hg-g modem.I read on here about someone else not having a gateway address or primary DNS. I don't know what to put in there. My camera address is 192.168.2.20.
View 4 Replies
View Related
Mar 12, 2011
I have successfully setup the camera at home, that I can use the mydlink website to view. But when I go to work and open my IE to view, it does not connect to the camera. Do I know to do something at the router to make it unblock or some sort?
View 1 Replies
View Related
Apr 7, 2011
The server is on a different network and the desktop is on a another network.I can ping the server but i can't access any drive on the server.
View 1 Replies
View Related
Jan 6, 2011
Able to establish wireless connection to broadband router but cannot browse internet as it seems unable to resolve site names.Unable to ping DNS server from the pc, get request timed out message
View 9 Replies
View Related
Jun 9, 2012
Recently i changed internet service provider and i went up to a 24 Mbps line, though i can only reach a 8 Mbps service due to my location.
The problem is that surfing the internet has gone all kinds of wrong. Every page takes at least 20 secs to open and the response to online games has the same, or even more, delay. Checking my emails also takes quite some time.I tried connecting through the ethernet cable & the wireless connection(not at the same time). I even tried making a static ip. Same results, i can't seem to browse.
View 4 Replies
View Related
Sep 5, 2012
I have built two servers,a cacti server and a syslog server.They are both in vlan 30.Both servers can ping each other and can ping the gateway.Now the problem is the cacti server can ping hosts in vlan 100 but the syslog server cant.I am using a subnet mask of 255.255.255.248.
View 1 Replies
View Related
May 7, 2012
I insert data from two clients.(1 window server 2003,2 XP clients ) the two client print paper and the printer is shared printer. At the same time two clients print paper and the printer stop working. So I restart my two clients and server. After restart the clients cannot ping to server.
View 1 Replies
View Related
