Cisco AAA/Identity/Nac :: Errors In ACS View Server In ACS 5.2?
May 30, 2011
I have deployed 7 appliances 5.2.0.26.4 CSACS-1121-K9 whose 6 are performing AAA authentications while the last one is is the primary and is the master for configuration and log collector.
Since this morning, I cannot access anymore the view where I can see all Radius authentication for today. I obtain the following message:The server workspace storage for on demand transient reports is full, please try again later or contact administrator to increase on demand transient report storage capacity?
Moreover, if I generate other report, I have the message:18002: iPortal generate report failed.I could find some information which makes references to a Cisco bug CSCtb98071, as below:
Launching a shared report in the ACS 5.1 Monitoring and Report Viewer displays an iportal error for a particular scenario.
#Symptom: You will see the following iportal error message when you launch a shared report:
#iPortal generate report failed.
#
#Conditions: This error occurs when you add a report to a group in the interactive viewer and save it as a shared report.
#Workaround: Avoid using the option Add Group from the interactive viewer for hyperlinked column entries when you save the report as shared
However, I am not adding any report to any group, so I don't understand why this error appears and how to solve it.
View 8 Replies
ADVERTISEMENT
Mar 1, 2012
I got many certificates errors. When ISE Server tried to retrieve CRL: CRL verification failed - possibly signed by wrong or unknown CA,When client tried to connect using EAP-TLS: X509 decrypt error - certificate signature failure.
View 2 Replies
View Related
Feb 18, 2013
We are seeing daily erros on our ACS5.4 server like below:
View 1 Replies
View Related
Jan 25, 2012
After an upgrade from ACS 5.1 to 5.3 the view-logprocessor are not running any more. I also installed the newest patch 5.3.0.40.1. The installations are success but the view-logprocessor steal are not working.
View 2 Replies
View Related
Apr 24, 2011
After upgrading to 5.2.0.26 I no longer seem to have a dashoard on the ACS View/Monitoring section.
View 5 Replies
View Related
Sep 13, 2011
I have a AIR-AP1121G-A-K9 running c1100-k9w7-tar.123-7.JA2 (Autonomous)We have monitoring setup with Orion NPM and we consistently see output errors, Transmit discards and big buffer errors The users at the site have not reporting any issues but was wondering how to prevent these or are these normal?What causes the output errors on Wireless Radio ? How to troubleshoot further ?
Radio0-802.11G
Total Output Errors 0 47749
Small Buffer Misses
4 misses
139 misses
[code]....
View 1 Replies
View Related
Mar 11, 2013
Would like to check out is it possible binding Cisco secure ACS 5.x to support router/switch ios feature view - superview and parser command
Busines objective is assigning administrative roles, with different role based CLI access, using ACS5.X as backend server. a. Admin (allow all) b. network monitor (privlege # 7, enable view that can doing various show command and configure) c. support (privlege #1, read only)
View 2 Replies
View Related
Oct 5, 2012
We have a Cisco ACS 5.2 deployment (appliance). It has an existing integration with Active Directory. We utilize this with RADIUS to authenticate our wireless users and TACACS for managing our network equipment.The RADIUS reports are useful for other teams (outside my own) to be able to troubleshoot password and account lockouts (everyone forgets to change the password on their phone).I would like to allow this team and other access to view the RADIUS authentications report.
View 2 Replies
View Related
Jul 27, 2011
We have an issue with View db (Monitoring & Reports) backup on ACS, version 5.2.0.26. We have scheduled incremental backup daily and full backup monthly. Everything has been working well, but since yesterday following errors have appeared, and full and incremental backup stopped working:
Alarm Name
System Alarm [Incremental Backup]
Cause/Trigger
On-demand Full Backup failed
Alarm Details
CARS_BR_BACKUP_CREATE : -405 : Internal error: couldn't create backup file
Alarm Name
[code]....
We use same repository as always. Backup to the same repository works from CLI.
View 2 Replies
View Related
May 18, 2011
I am having trouble viewing all the Administration logs in ACS View. I have my Local Log Target set to a Maximum log retention period of 90 days. In ACS View I can display authentications that go back 90 days + However when I try and display the "ACS_Configuration_Audit" in View and perform a Custom query that goes back 90 days it will only display about 35 days of Admin logs.I know the logs are there because when I go into CLI and do a search like "show logging | i "ObjectType=Administrator Account" the Administration logs go back over a year.why ACS View cannot display all the Admin logs?The ACS is running v5.1.0.44 Patch 6 (Also experiencing this in a v5.2 ACS as well)
View 2 Replies
View Related
Apr 6, 2011
This is the error message I am getting on our ACS 5.1 appliance - is there anyway to purge the database or compact the file?
View 1 Replies
View Related
Jul 15, 2011
I have an office server set up to about 10 computers. We hired 4 new people and had to set up their computers on our network. Set up was easy and quick as usual. But when I was done, the other computer users, and even the new ones were complaining about not being able to access the DEFCON5 (name of our server) folder to get what they needed. Basically the only workstations that show up when I click Network are the computers I added the other day, and the computer that is used more than any other computer (the CEO's). We can still access the files by typing the location as \DEFCON5****** and find what we need. But not everyone at my office is computer savy (no body is) and I would like to not have to keep running around and showing everyone this.
View 1 Replies
View Related
May 21, 2012
how to view what is displayed on xpclient on server 2003
View 1 Replies
View Related
Feb 28, 2012
I use a Buffalo Nas LinkStation WXL server to back up my files and data. It has been working perfectly and we have saved some files and data in it.However, we turned it on one day and it had disappeared from the list of Computers on the network and for a while now we haven't been able to get in. It is not showing in the list of Computers in Network and its webpage keeps coming back as "Unable to Connect" or "Taking to Long to Respond".The server is visible on the router's webpage under DHCP Clients List and we can ping the server and get a reply. But none of the laptops on the network can view it neither can I (the administrator) get access to it via its webpage?
View 1 Replies
View Related
Apr 12, 2013
I am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80 .... 85. The screen has only the option for 1 video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?
View 5 Replies
View Related
Mar 21, 2011
we Bough new mcs server in order to install ACS 4.1,now acs is running on normal PC and its fully configured , so now i want to back up the acs database and the configuration file in order to install it in the new server so how to do that
View 4 Replies
View Related
May 9, 2011
I need to patch our ACS server to 4.2.0.124.17 from 4.2.0.124.6. My question is, do I need to apply the same patch to our remote agents? Cisco's documentation only states that both the ACS and the Remote Agents need to be 4.2.0.
View 1 Replies
View Related
May 23, 2013
I am wanting to generate a signing request for an ACS 5.3 box to send to a Microsoft CA. Is there anyone out there using a MS CA for eap-tls?
View 1 Replies
View Related
Dec 7, 2009
I'wont to upgade my ACS server 5.0.0.21 to 5.1 . I wont to use Active Directory . it's seem that in my curent version AD is not supported !
View 12 Replies
View Related
Apr 21, 2013
I am looking for any PDF, recomendation, link for best approach for secondary ACS as resiliency.
View 4 Replies
View Related
Mar 2, 2011
We have enabled EAP-TLS authentication for our wireless LAN end user in our network setup , And we have defined certificate on our old acs server 3.3 from a third party CA . I want to use the same certifcate which is being used in 3.3 ,how i can copy that certficate from 3.3 and get it installed on new acs 4.2 .
View 7 Replies
View Related
May 13, 2012
Question on this, is 5.2 backwards compatible with 4.2 appliance? If not, what is needed to bring the 4.2 appliance up to 5.2 and will the VMWare version work for the second system with the appliance as primary? Years ago I had 2 of them and replication worked flawlessly, but we had to take the one unit offline for another project and have never replaced it.
View 3 Replies
View Related
Jun 3, 2011
configure AAA (Radius server, access list) There are two devices An access point and cisco 881w. It is necessary to set up authentication through a radius server. You can configure detailed how to do this?
View 3 Replies
View Related
Nov 30, 2011
I'm having problems settting up a Guest NAC server to authenticate administrative users against a ACS 5.x server. In the ACS RADIUS Authentication log, I can see the user authentication is successful.In the AAA Diagnostics log, I can see the following warning:An Access-Request MUST contain either a NAS-IP-Address or a NAS-Identifier or both; Continue processing.
View 2 Replies
View Related
Feb 7, 2011
How to convert a 3140 CAM to a CAS ? if so what software / licensing would be required and is there a documented process
View 1 Replies
View Related
Feb 28, 2013
We are using ACS 5.3 with two servers in a distributed solution.All logs are collected on primary server so when this server fails all logs are lost.How can I enable log on secondary server also?
View 2 Replies
View Related
Nov 8, 2011
I have a cisco ACS 4.0 build 27 on windows 2003 server . My site was working fine when i was having a AD on 2003 server . Recently i have migrated my AD servers is 2008 .
After the migration the ACS is not authenticating the users . Now i have made a server with 2003 and made the site working . I need a solution to make it work using 2008 server is there any compatiblity issue between ACS 4.0 and 2008 server .
View 1 Replies
View Related
Dec 4, 2011
I setup one acs v5.3 in one server in NYC and another acs v5.3 in SJC.I want to make the acs.nyc as primary and acs.sjc as the secondary, how do i setup it up?
View 1 Replies
View Related
Mar 8, 2011
I'm currently working on ACS 5.1 to use it as AAA server for Netscout NGenius.I followed a guide for ACS 4.2 and tried to replicate the configuration settings in ACS 5.1.
- created a host profile on network devices and AAA clients having the same shared key with NGenius
- added three (3) NGenius required attributes in system administration > configuration > identity > internal users
- added attribute values to Internal User database
- created an access policy:
* identity pointing to Internal Users
- edit serverprivate.properties in NGenius server to match the requirements
I would like to have NGenius authenticate via ACS 5.1, but as of the moment there is an error message that I receive:
Unicentified error, Code=16510, Details: AV pairs do not match NGenius format ::<insert tacacs username here>, Severity 1, Code: 16510.
View 2 Replies
View Related
Jan 10, 2012
When I tried to import the file, there are two lines there, One is Certificate file, the other is for "Private Key File".
My question for you is, is this the private key of CA? My understanding has always been that the private key stays in CA only, not going to any other devices.
View 2 Replies
View Related
Sep 25, 2012
I had a working server running ISE version 1.1.0.665 but someone in the build room decided to pull the power out of the server rather than shutting it down correctly. I have booted the server back up however the web management page was not accessable. I have checked the server status and the end result is the Application Server in the "still initializing" stage. I have left the server for several hours and the status has not changed.
I know people have previously run into this issue but no one has posted any resolution or confirmed that a rebuild is the only solution. I have tried to create an on-demand backup but it seems to fail when attempting to provide the credentials (which are correct) for the FTP server.
View 1 Replies
View Related
May 18, 2011
getting a Cisco WLC to work with MS NPS server? We've done it before albeit with differnt code versions.
I have a Cisco 5508 WLC running 7.0.116.0 code hosting a WLAN configured for WPA2 with 802.1x for authentication. I have two Windows NPS servers configured as the RADIUS servers for EAP-TLS authentication. Via debug info on the WLC I can see the 802.1x handshake take place with the wireless client and the WLC as well as a successful transmission of an Authentication Packet from the WLC to one of the RADIUS servers. However on the WLC I see repeated RADIUS server x.x.x.x:1812 deactivated in global list and on the NPS server I'm seeing event log errors indicating "The Network Policy Server discarded the request for a user" along with the pertinent auth request info that I would expect the NPS server to receive from the WLC. Based on the WLC debug info I'm never actually getting to the EAP-TLS certificate authentication part. It seems the NPS servers don't like the format of the initial RADIUS authentication request coming from the WLC and so don't respond whcih in turn casues to WLC to switch to the other NPS server which produces the same issue.
View 2 Replies
View Related
Nov 1, 2010
I'm having issue with tacacs server(ACS 4.2), did the following test from the router:
Router1#test aaa group tacacs+ cisco cisco legacyAttempting authentication test to server-group tacacs+ using tacacs+No authoritative response from any server.I can ping the ACS server from this router though.
View 6 Replies
View Related
