the customer has CUCM in the inventory database of LMS 4.1. He has all accesses from LMS to CUCM. One phone 7961 is seen in the UT report. When the customer click on the CUCM in the inventory - there is no IP phone registered in the CUCM.
the customer has CUCM in the inventory database of LMS 4.1. He has all accesses from LMS to CUCM. One phone 7961 is seen in the UT report. When the customer click on the CUCM in the inventory - there is no IP phone registered in the CUCM. What is wrong?:-( See the attachment.
I have deployed the NAC Solution. NAC Software version = 4.8.2 and Agent version = 4.8.3.1.The solution is working fine but the Cisco IP Phone CP9951 is getting restart after applying NAC (or port profiles) at some time interval. Time is not fixed but it doesn't seem stable. Sometimes, it is just disconnected while using the Phone and sometimes when you log-off or restart the PC.The Cisco IP Phone CP8945 is working fine in all cases.We are getting the message of "Phone not registered" and active call is getting disconnected.
I am working in Private IT company. The facility is having 4000 users and it is a high resliency site having two core switches and nearly 40 access switches. All core and access switches are 4506E switches and odd vlan is taking core-1 and even vlan is core-2. We are having cisco ip phones 6921 connected as daisy chain.( Phone is connected to access switch and the desktop is connected to ip phones). The Ip phone are getting registered cisco call maneger server. The call manager one leg is connected to one core switch and another one is core 2 same like my DHCP server.
For all vlans the the default gateway is my firwall. The voice needs to hit the call manager, hence we have implemented a source routing to call manager for the voice vlans. the problem is once we down the Core-1 some of the IP phones are not getting registered no matterit is on odd or even vlan. The same issue for Core-2. We suspect that there might be some issue in the DHCP server for voice vlan routing. But server team is saying that there is no issue with the DHCP server.Now network is vulnerable that if any core switch is down my voice ip phones will be down.
I have a problem with my SIP trunk config. I can receive calls, but unfortunately I cannot dial. I found out why, and it is because I have one main registered number from TISP, and I am trying to dial with the phone number from the block. That is why I am receiving unauthorized messages when I enable debug ccsip messages. I called TISP and they said that I should always use main number and to send my number via P-Asserted id. or via P-Preferred Id. how to configure this ? I found only this conf.
Commands: dial-peer voice tag viace-class sip asserted-id pai or ppi
I tried with this but it didn't work. I don't know where to say what I need to insert , and instead of what .
Any OID to determine the number of registered AP's on a WLC (specifically the AIR-CT2504).
I've got both of the Airespace MIBs and have browsed through them but I can't seem to find the correct location. I can find a list of all of the AP's registered but our monitoring software doesn't have the ability to 'count' that index. As such, I'm looking for a count/summation of the total number of registered AP's via SNMP.
how I could possibly get all my e-mails of which I send my clients through my outlook to be registered on my Home-outlook, Office-Outlook and my mobile-outlook? like on the server? something similar to when you open yahoo or G-mail from any given location you can view your sent Items,inbox etc.
We are upgrading from Callmanager 4.0(2a) to new hardware and the latest version. We have Callmanger 4.0(2a) and would like to upgrade to the newest version, at least to CUCM 8. We already have the new hardware that is compatible, smartnets and licenses. After looking at the matrix sheet it appears (there were several different upgrade routes but I could only find documentation for upgradring to 7.1(2) and 7.0(1) from 4.x so I am going with 7.1(2)) should we go:
from 4.0(2a) to 4.3(1)
from 4.3(1) to 7.1(2)
from 7.1(2) to 8.0(1)
this gets us to 8 which we can then upgrade to 8.5 or 8.6
So, we have 4 servers, 2 old (Pub, Sub) and 2 new (Pub, Sub). What is the best plan of attack here:
1) Backup 4.0(2a), then do an inplace upgrade on old hardware from 4.0(2a) to 4.3(1). Then backup 4.3(1) and do another inplace upgrade on the same server to 7.1(2). Then load 7.1(2) on the new hardware and restore backup from 7.1(2) on the old hardware. Then backup and inplace upgrade to 8.0 on the new server?
Or
2) is there any way to not have to "touch" or do an inplace upgrade on the old hardware running 4.0(2a), and just run a backup on it, load 8.5 on the new server and import the data over from the backup?
What vmware i have to use to install cucm 7. vmware workstation 7 or vmware server or exsi 4 or 5. Any correct link to download and vmware config settings.
We have a Cisco 4404 WLC and and about 70 Cisco 1131 APs. I am very new to the Cisco WLC and I need to know how to view its AP registration and unregistration logs. We have a AP that has unregistered and we can't seem to find what switchport it was attached to. It would be useful to know the IP address and ideally any CDP information it had. Unfortunately you can only view this information in the WLC if the AP is registered, but at this point it is not.
I have a Inspiron m5010 laptop and I'm getting the issue where "wireless configuration- notification dll has not been registered, program will not work correctly." How to find the drivers and what to download?
I've looked in many places but cannot see how or if it is possible to configure a phone, in CUCM to have a feature ring instead of the normal ring.In CUCME you go into the ephone x configuration mode, and assign the DN to the phone with the button xfx command. What this gives you is a slightly different ring tone when a call comes through. If I am not mistaken it is the same ringtone they use on the show "24".Is there a way to do this "feature" with CUCM?
I have a problem with my Cisco 7961 phones not registering on my CUCM 8.6 install on ESXi 5. Weird because I have Cisco IP communicator phones that register with no problem. You guys know what I can be missing. I have restarted the CUCM and services multiple times. The phone log on my phones say it can't find dhcp and DNS unknown host but my CUCM is configured by IP address. I also attached some screenshots
I have a CUOM 2.3 and CUCM 7.0 installed, we are planned to have a major upgrade to CUCM to 8.5 soon, do i need to upgrade my CUOM ,since CUOM is a Network management system? If CUOM to be upgraded to 8.X do we need to purchase the upgrade license? Is OM 2.3 to 8.X is a direct upgrade?
My Customer today have CUOM 2.3 and CUCM 7.1.3. He is planning to do upgrade CUOM 8.6 and CUCM 8.6. My question is: Is it possible to do upgrade CUOM directly to 8.6? If CUOM to be upgraded to 8.X do we need to purchase the upgrade license?
Looks like I still have an issue with LMS to recognize the IP Phones in UT as IP Phones. SNMP RO on Call Manager is enabled and is green in CM (e.g. topology) - so SNMP get is basically fine. The Phones are recognised as End Devices in UT.
As far as I understand, now if I start a Phone Aquisition, the CUCM is polled by LMS to gather additional information about the phones. So it seems there is a problem with the SNMP polling of the Call manager?
Cisco LMS 4.0: Is able to forward SNMP traps (ver. 2c) received from device registered with it to a configurable IP address? • Traps contain the original Device Agent IP to identify the source (Not the IP of LMS)?• Is possible to configure one logical IP address or Domain Name for redundant LMS:Cisco Security Manager 4.1:Is able to forward SNMP traps (ver. 2c) received from device registered with it to a configurable IP address?• Traps contain the original Device Agent IP to identify the source (Not the IP of Security Manager)? • Is possible to configure one logical IP address or Domain Name for redundant Security Manager?
bit of a newbie to this call manager stuff but I was having a bit of a play earlier and for the life of me I can not see an easy way to list which directory numbers are in a particular pickup group. I can see the list of pickup groups and how to assign the directory number to a pickup group but surely there's an easy way to find out which numbers are in a particular pickup group???
I was thinking, is there a way to view a report on the configured numbers within CUCM? E.g. not only extension numbers but hunt pilots and other things such as that? Rather than manually going to each page.
I am trying to configure my ASA 7.2(4) to inspect SCCP traffic from a CUCM v7.I have been advised that the ASA device needs to support the version of Skinny I am running.What version of Skinny does ASA 7.2(4) support? How can I find out what version my phones are using?
I have a 2951 which i want to integrate to the CUCM and wish to plug a Siemens ISDX into it which is the best card to use NM-HDV2-1T1/E1 or WIC2-2MFT-T1/E1? its QSIG
I got a brand new wireless router and made it the first in line with my cable modem. This is necessary because I want to take advantage of all the features in the new router. I put the RTP300 behind the first router and switched off DHCP and connected the internet port into one of the 4 regular ports on the back (typical configuration for a pass through router).So everything works perfectly for any computer attached to the router (they can access the internet etc). The only problem I have is the VOIP doesn't work. If I pick up my phone it says this device is not registered to a phone number.
In CUCME if you do not configure any translation rules and leave the system mainly at default, when a call is routed to the PSTN the CUCME system sends the true calling party ID which would be a users extension number. Is it correct to assume that a CUCM server based system, when too left at the majority of default (without translation rules or stripping etc) that it will send the true calling ID to the gateway?
We have CUCM & lync server setup and its working fine if any one calling each other with DNS load balancing. But customer want ot use Cisco ACE 4710 instead of DNS LB.We have configured Cisco LB and deploy but when CUCM user calling to lync user call going to disconnect after 4 sec and also Lync users unable to make call to CUCM.And also LB deploye between share point but when users are trying to open web session that time web page going to show page cannot display.
I used WPS on my DIR-655 Rev B1 FW 2.03NA to register a Brother HL-2270DW Wifi laser printer and my Mac can never wake it up to print. It always works fine from all my Windows machines.It appears as xxx.xxx.xxx.6 on my network. But the router only shows its IP as 0.0.0.0 on the STATUSWireless page and I can't find any way to change that. My assumption is that the Mac can't find it because of this, but I'm not an expert on WPS.Maybe I should take it out of WPS and just assign it a fixed IP using DHCP Reservation. Or is there another fix? I haven't ruled out the Brother OS X printer driver, but it and the printer's firmware are both up to date.Two odd things:
1. I can ping the printer from my PCs but the Mac can't find see in and it's not a Firewall issue.
2. I can see the brother printer in Finder's Shared devices: so it sees it but refuses to interact.
I'm trying to get the phone VPN function working from a Cisco 7965 phone. I can connect fine to the SSL VPN via a normal PC. When I try from a phone, it tries to connect and returns with: "VPN Authentication Failed"
yet, when I look on the ASA with "sh vpn-sessiondb anyconnect" I can see the phone has connected fine:
Username : fred Index : 17 Public IP : x.x.x.x Protocol : AnyConnect-Parent License : AnyConnect Premium, AnyConnect for Cisco VPN Phone Encryption : AES128 Hashing : SHA1 Bytes Tx : 2417 Bytes Rx : 676 Group Policy : SSLClientPolicy Tunnel Group : SSLClientProfile Login Time : 15:05:53 GMT/BDT Fri Aug 19 2011 Duration : 0h:00m:38s Inactivity : 0h:00m:08s NAC Result : Unknown VLAN Mapping : N/A VLAN : none
I have a CME that has a FXO card, I can call the CME's number from an on-site phone and it works just fine, but when I try from my cell phone it picks up but doesn't give the dial-tone like it's suppose to, but if I hook an analog line to the phone line I can call that no problem from my cell?
I have a CME on the other end of my MPLS network. When troubleshooting phone issues i setup a phone on the CME system in question and point its TFTP server to the address of the CME router. Now, i need to point this phone to another CME but it keeps registering with the previous one no matter what i do (the TFTP server is pointed to the new CME). I have tried turning off the auto register, and i have deleted the ephone and its mac address all together but it always registers with the wrong CME.
I am moving an IP Phone from one subnet to another subnet.I have deleted the IP Phone configuration in call manager(System version: 7.0.1.11000-2); however, when adding the same device (same MAC address) again in the call manager, the call manager associates the phone with the old IPv4 address (even though the phone is turned off). The phone is booting up and getting a different IP address on the new subnet, and is always in the "Registering" state. The phone has the right CM IP, TFTP IP, etc. the only difference is the phone IP address and the IP address that the CM is showing in the phone device configuration. I also tried resetting/rebooting and restore phone to default factory setting but it doesn't work, i have few more devices on this new subnet that are working fine.
Is-it possible to manage Cisco phone by web interface? (Manage transfertdiversion... of IP phone)When i go to http://ip_cisco7961 and i give permissions in settings of user (web Access: Enabled)I have only information in read only.