Cisco :: Prime LMS 4.2 Browser Hanging
Sep 14, 2012
We have Cisco Prime 4.2 installed Windows 2008 R2 server, I am facing problem when I am going under Report>Fault & events or any other section, the browser gets stuck in loading page and become unresponsive. If I restrart the Daemon manager service it works fine for some time and again start giving problem in two or three hours time interval.I also face the same problem when I go to Admin > Job browser window.Does any one face the same problem,I have changed the host name of thserver using script and also generated new SSL certificate and I tried with diffrent browsers but problem is still persisting.
View 1 Replies
ADVERTISEMENT
Dec 8, 2011
Using Cisco Prime 4.1 and it looks like garbage in Safari. Any chance that there is browser support besides IE?
View 1 Replies
View Related
May 9, 2013
I'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2. I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration to Prime Infrastructure goes well. I am planning to follow Cisco's recommendation to run Prime LMS and Prime Infrastructure in parallel for a time and migrate individual functions.
My real question is about Syslog handling. All of the managed devices are currently sending Syslog data to LMS. As a last step in the migration, is it possible to change the IP address of the Prime Infrastructure server to replace the Prime LMS server so that the Prime Infrastructure server will just start getting all the Syslog data, or do I need to go change hundreds of managed devices to point to a new address?
View 2 Replies
View Related
Mar 12, 2013
What is the relation between: cisco NCScisco Prime LMSCisco Prime infrastructure.As i orderd a Cisco Prime infrastructure from a Cisco Partner and what i got is :
x2 cisco NCS appliances
x1 DVD cisco prime infrastructure
x1 DVD Cisco prime 4.2
View 4 Replies
View Related
Oct 26, 2011
I'm running (C7200P-ADVENTERPRISEK9-M), Version 12.4(24)T4, RELEASE SOFTWARE (fc2) on a Cisco 7204VXR (NPE-G2). Currently, the router has about 200 VLANs configured on dot1q subinterfaces.
Now, the router hangs everytime we try to add a new Vlan.
Is there a well-known bug with the IOS version?
View 1 Replies
View Related
Sep 24, 2007
When I power on our ASA 5510 it just hangs on "Launching BootLoader...".
I've managed to get into ROMMON before it attempts to launch the bootloader and tried to restore an ASA image but it said disk0: failed to mount.I've copied the console output but am not sure if it is useful to diagnose the problem or not (and is quite long)
View 9 Replies
View Related
Apr 13, 2012
I have some issues with win 7 64 bit pro. I have 3 computers on a cat 5 wired home LAN using a DGL-4500 router and in yhe same homegroup. All are gigabit capable. 2 are regular PCs, one is an HTPC. All have the latest drivers.1) File transfers never exceed 12% of the network capacity.2) If I transfer from computer A to computer B's public folder, I can transfer 1GB in a few minutes. However, if I attempt to copy/paste a file from Computer B's public folder to computer A, computer A takes forever "discovering" the file, then gives some absurd transfer time, say 11 hours for the same file.3) If however I go to computer B and paste the same file into Computer A's public folder, the transfer takes only a few minutes.
4) If at any point during scenario #2 I right-click B's public folder from A during a transfer, I get the spinning circle forever which 90% of the time results in Explorer hanging and requiring the process to be killed/restarted.
View 4 Replies
View Related
Jan 18, 2012
Hanging up our cordless phones briefly interrupts our wireless connection. Just long enough to be disconnected from online games.We are using DECT 6.0 Vtech phones (definitely not 2.4 ghz phones)We have verizon FIOS internet (not DSL)I've tried changing channels in the modem with no success.
View 5 Replies
View Related
Mar 29, 2012
I have a client that has a newer Dell T310 - 8GB - Xeon 2.4, SBS 2011. Just went to a clients to move the office from one building to the other, couldn't log into the server so went to the terminal and saw the machine wasn't responsive in windows - users still able to access files and Quickbooks. I had to force shut down the machine.Now I fire it up, it gets to the login screen, and when I log in it gets stuck on the welcome screen. I can get into safe mode, i do not see any errors in event viewer that jump out. Hard drive lights are blicking like crazy at the welcome screen. But still can't get into it, and then the machine seems to lock up.
View 19 Replies
View Related
Mar 28, 2011
I'm using a Cisco 2821 router to provide temporary Internet access for a private network of about 300 users for a conference at a hotel. The hotel has provided me a public IP address for the WAN side. On the LAN side I have a 10.x.x.x /8 subnet with the router providing DHCP and NATing (overload) across the WAN interface.
Users can pick up an IP address and access the web. Light web pages such as Google tend to load without issue, however if a user does something that takes more time, such as streaming a Youtube trailer or opening an RDP session, the connection will freeze.
It doesn't appear to be related to bandwidth availability. Pings return on average 10-15 ms. However, I will get a request time out about every 10th continual ping. Steaming video will load about 4-6 seconds worth of data, then will appear to freeze without dropping. Doing something like speedtest.net will send a large amount of data then will hang, without ever ending the conversation.
This doesn't happen when I plug a laptop directly into the hotel public Internet line. They also don't have issues with their network similar to this.
I do not have any ACLs, etc. loaded. The router is basically wide open as far as I can tell. I don't see the router resources getting used much at all.
View 1 Replies
View Related
Mar 5, 2011
i have 2851 router and it is hanging when i login on it while it is hanging it gives me the following error message: [code]
View 2 Replies
View Related
May 3, 2012
I received a new 2504 today, I consoled on and powered it up. I see the boot sequence starting all the services. Unfortunately that's about all I can do - i try to terminate the Auto-install script but even pressing the Enter key has no effect. I can ping the 2504 but HTTP just times out. The console cable and terminal software are fine (I use them daily on a number of Cisco devices). I have done a factory reset but the same thing happens.
So, I'm thinking the unit needs to be RMA'd ?
This is what is on the current session :- [Code] ........
View 4 Replies
View Related
Oct 30, 2011
I have 3 locations connected with MPLS connectivity … 2 mbps , 2 mbps branches and 4 mbps and I have Cisco 1841 router ?Last few days I am facing problem that Cisco 1841 router’s Lan port suddenly stop working and connectivity get disconnected.In this stage branch offices can reach up to CISCO 1841 WAN port.
( I have changed 2 different router assuming router problem but issues remain same, Hence No hardware problem )
View 3 Replies
View Related
Dec 16, 2012
I have a 2911 router hanging/freezing at random times, could work fine for a week then crash, or sometimes, could only go a few hours, completely random with timing. The onyl fix is to manually pull the power and reinsert.When this happens, all services/access stop working, including nothing on console access.This was on 15.2.1.T1 which im aware, has a few bugs, so i upgraded to 15.2.1.T2.The issue continued, so I swapped out the 2911 with a brand new one. The issue is still present.
One interesting thing, is when the router crashes/freezes, all lights appear to remain on working as usual, but when i unplug any of the ethernet links, the lights still continue to remain flashing and on for the ethernet LEDs, even once i have fully removed the cat6 cable.
View 8 Replies
View Related
Dec 21, 2010
I'm using two WRV210 Linksys Cisco Routers to create a tunnel between two places with a pppoe adsl internet connection.I made several tests with new 2.xxx and old 1.7xx firmware, and nothing changes.Try to reset to factory defaults, and nothing changes.I have two problems:
1) The router crashes after a time working, usualy around 24 hours, sometimes more, sometimes less. The lights still flashing, but nothing happens, no VPN traffic and no ping response from the router, and of course, no internet access. I could see just that the router works a bit hot, but, I think that is normal.
2) The VPN IPSEC was configured, and both configurations are identical. All value are the same, I am using the dyndns service. So, the VPN quickly connects and I can ping and access remote computers. Windows Folders, VNC, IT'S REALLY WORKS FULL. WORKS REALLY FINE. PERFECT.
BUT, when the router crashes, as I've told on problem 01, after remove the power cord and insert ir again, the VPN don't reconnect.On log's, I could see that it's say that has no preshared key. [code] But, it worked before. Nothing changes, nothing, the router just restarts. No configuration was lost, (I checked the VPN IPSEC TAB), but says that have no preshared key,The unique way to restablish the connection is go on the VPN IPSEC TAB, and change symetrical any configuration, as change MAIN MODE to AGGRESSIVE on both routers.So, now are as MAIN. Tomorow probably it will crash, so, I will have to restart both routers, and change to AGGRESSIVE. So, when it happens again, i will have to back to MAIN.
View 19 Replies
View Related
Feb 22, 2012
The firewall on my RVS4000 appears to hang when ever I use Netflix. If I disable the firewall and re-enable it it works for a while and then stops again. My IP address is in the Approved Client IP Addresses so it is excluded from the URL filtering and Web reputation rules.
View 5 Replies
View Related
Sep 2, 2012
My Cisco 2960 Switch hanging problem (does not work or LED light), when i removed SFP module slots its working fine.
View 1 Replies
View Related
Jan 13, 2011
When I select Job Broser I get the following crash, LMS 3.2, server has been restarted but I continue to get the error. [code]
View 4 Replies
View Related
Sep 10, 2012
It started when I couldn't connect to a specific website for 2 days. I had to change my IP to get on again, and when I did I got a message from the admin saying that I had been blocked automatically because my browser was using upwards of 200 connections at a time. He made me check all the browser settings for it, and everything was still set at default. I didn't download any program or add-on, I did nothing special. It started out of the blue. I did virus scans, I reinstalled firefox and opera (the browsers I use). At this point I have no clue what the problem is.
View 4 Replies
View Related
Apr 24, 2012
Since downloading constant guard and Norton on my computer, I can connect to a wireless router but cannot open a web browser. My network diagnostics says could not make HTTP/HTTPS/FTP connection.I have tried many different things. IP configuration is correct. It will ping out to the internet and receive back without a problem.
View 8 Replies
View Related
Jun 20, 2011
I want to see the IPs that are on browser games, but I haven't found a way.Does anyone know how I could go about doing this, or at least tell me what computer language this would take, or any other information you have? I'm talking about games such as Runescape, Clubpenguin, or Roblox.I would also like to know how to see IPs on bought games such as Diablo 2 or Unreal Tournament 3.
View 3 Replies
View Related
Nov 26, 2012
I have acquired a Cisco 881 router and have installed CCP express onto it. The router is set to factory default and I am using IE9, Java is also installed.i try to log in using the default IP of 10.10.10.1 through the browser and the log in box pops up, I type the default "cisco - cisco" to log in, the box disappears but then nothing, just a blank browser page, CCP express refuses to boot up.PC's firewall and security programs are turned off.Pop up blockers are deactivated in browser.Flash is installed.I've tried downgrading my version of Java to various versions and doing a hard reset but still no luck.I've tried CCP Express versions 2.6 & 2.7.I have tried from 2 different PCs.I have also tried from Firefox with the same result.I am able to access the router from console and CCP full version.
View 10 Replies
View Related
Feb 14, 2012
I have my device configured, and it has an IP, subnet, etc.I currently have it connected with serial port to my laptop and used PutTy to get into it,
However, despite it having an IP, I cannot use the web browser with it! This is driving me mad. I want to use the web browser and not the CLI for everything. it has a BVI1 IP as well as an Ethernet address.
View 2 Replies
View Related
Jun 12, 2012
I recently installed LMS 4.2 appliance and I noticed that the web administration page was really slow. I checked the CPU utilization in VMware and it was at 55%.
View 1 Replies
View Related
Feb 24, 2012
have doubt, now my system is under my company domain,is there possible my network admin can watch my browser history
View 1 Replies
View Related
Apr 18, 2012
Email works, pinging www.google.com works, but cannot get anything with browser. I was using Chrome. But having same issues with IE and Mozilla. Second computer on network is not having any issues.
View 1 Replies
View Related
Oct 18, 2011
I am able to use the lap top but not my desk PC.Browser keeps "failing" to recognize the DNS ? or my ports are blocked by a previous firewall ?
View 19 Replies
View Related
Sep 15, 2011
I accidentally deleted my wireless adapter, so i re installed it in device manager, and now i can't connect to anything except my router, when i check internet options, it tells me that i'm connected to the internet. I can go on the internet on this other laptop and desktop computers, xbox and whatever else, just not the other laptop (it's an hp pavillion dv6000 btw)
View 1 Replies
View Related
Oct 16, 2012
We have a server with lots of home videos on. We currently run HFS so that the files can be accessed by anyone on the home network and download them.
What software would I use to be able to stream the videos in realtime through a browser?
View 4 Replies
View Related
Aug 3, 2011
I have recently run into an intermittent and annoying problem. My LAN connection always shows that it is connected, but once every few hours, IE8 will not be able to connect. Usually, after about 5 minutes, the browser will find its bearings and start working again.
View 14 Replies
View Related
Jan 28, 2013
Let me start with what the problem is. Some pages like google open very fast while some takes a lot of time and sometimes do not load at all.I tried pinging certain websites along with mygame website mabinogi.nexon.net and the request timed out. I tried a few solutions
1) Switched browser and it didn't seem to work (Even the client I use for the game Mabinogi disconnects every 5 to 10 mins)
2) Tried changing the DNS to OpenDNS and it still didn't work
3) Tried using network on safe mode with networking and still I got the same result. That is some pages take a lot of time while others load soon.
View 1 Replies
View Related
Oct 12, 2012
I am experiencing the same problems except different setup. I use avg and spybot as my security.The problem is that I cannot use any browser be it firefox or chrome or IE. I can't even update my avg or spybot. I can type in my router and get that. I have a laptop, which I am using now, that is working fine with the internet. Even my 360 is able to connect so I can watch netflix.I have "flushed" the connection, I have used winsock, and macshift. I'm running AVG and Spybot with spybot coming back clean but I have a gut feeling it won't work.I have run sfc /scannow and there is some files missing. I inserted my original disk into the cd-rom and refuses to detect the cd after so many tries. I reset the router and computer several times. I tried running sfc /scannow in safe mode but didn't run[CODE]
View 11 Replies
View Related
Oct 24, 2011
dns lookup failed, on all web browser (IE, Google, Firefox). I did ip and winsock reset, did networking ins safe mode, it will ping my ip address but will not ping any other address. My computer (running Vista home premium) says that I have internet access but it does not work. This happened on one computer and then on another one about 6 days later and they both are wired to a router.
View 4 Replies
View Related
