Cisco Routers :: RV180W VPN Configuration / How To Choose Multiple Subnets
Jan 4, 2013
I have setup 15 x RV180W's so far for a particular client.They have requested that we add a Corporate Wireless VLAN for their laptop users (not guests) and add a Special Use WiFi VLAN for a particular mobile platform that is being deployed (in this case we need 2 separate WiFi VLANs to ensure compliance).Also, none of the VLANs can talk to eachother and they have their own subnets.I have the Wireless and VLANs setup, no problem... but I am having an issue wiht the VPN settings.I have the wired network's subnet working fine. But I do not know how to add the subnets for both Wireless VLANs to the traffic selection.The IP schemes will not allow me to just select a large subnet... here are some examples:
Wired VLAN: 10.10.x.y
Corporate WiFi VLAN: 10.15.x.y
Special WiFi VLAN: 10.18.x.y
x is the octet that defines the physical unit location (unit 1 = .23, unit 2 = .24, etc...) y is the octet the host.Since they are not in a contiguous block, I cannot just use a larger subnet mask.I can add multiple traffic selection rules to the ASA5515 at HQ, so that side of the tunnel is perfect... I just don't know how to add the three VLANs to the RV180. Is it as simple as using commas or semicolons?
View 1 Replies
ADVERTISEMENT
Sep 27, 2012
I have a RV180W and a EnGenius EAP350 Access Point. The EnGenius supports multiple SSID's and VLAN tags them. If port 1 on the RV180W has VLAN 1 untagged and VLAN2 tagged, any connection to the EnGenius always gets an IP from the VLAN 1, even though they are connected to the SSID which is tagged with VLAN2.
View 3 Replies
View Related
Sep 4, 2012
I am setting up a customer site. One side is RV180W and the other side is Checkpoint 500W.
RV180W side
LAN - 192.168.100.0/24
Checkpoint side
LAN - 172.26.1.0/24
VOIP - 172.26.2.0/24
Need to setup an ipsec tunnel between the site. However, from the RV180W side, I can only ping the VOIP network, but not LAN. I have heard that RV180W only can talk to one remote network via ipsec, correct? workaround this other than changing out the RV180W?
View 4 Replies
View Related
Jan 22, 2013
Here's what I want to do with my RV042: I have a bunch of devices, including a server, inside my network at 192.168.1.100
I've set up VPN using PPTP. It works, but if my clients have their own remote DHCP set up to 192.168.1.x, they can't get to the server. If their home DHCP is 10.x.x.x., everything works
I am considering changing my internal network to something obscure.
My server has two NICs. So I thought, I why not set one address up to 10.x.x.x But the two nets can't ping each other. I tried using "multiple subnet" on the RV042, setting up 10.1.1.1, but no luck.
View 1 Replies
View Related
Aug 5, 2011
We have 4 RV 042 routers and cisco router at HQ, we have Site to Site VPN tunnels in between, All branch offices are connected to HQ via S2S VPN tunnels
10.10.1.0/ 24 HQ
10.10.2.0/24 Branch 1
10.10.3.0/24 Branch 2
10.10.4.0/24 Branch 3
10.10.5.0/24 Branch 4
now lets say i am branch 1, i can access 10.10.1.0/24 network but cant access 10.10.5.0/24 network, means i dont have branch to branch connection, it should be through HQ, means my RV042 at brnach should fwd all traffic to HQ for another branches also. Under VPN tunnel if i try to configure remote destination 10.10.0.0/21 its not allowing me it says network overlaping with local network, how i can sole it, I know how to do in cisco, we can permit those networks in access lists.
View 1 Replies
View Related
Jul 25, 2012
I am struggling to configure my new RV180w router to accept a VPN connection from my Apple computers.
I wish to use IPSec with Group and Pre-Shared Key authentication. The RV180 has just replaced my 800 series ADSL router and I want my remote clients to be able to connect using either the VPN client capability built into the OS X operating system or the Cisco VPN Client software installed on their Macs.
So far, using the RV180's web setup screens, I have created a VPN Policy and a corresponding IKE Policy was created as well. I couldn't see anywhere to include the 'Group' name. I have created a user but wasn't sure of which Protocol to use so I am trying XAUTH.
At the client end some people are connecting using Cisco's VPN Client software Download Software - Cisco Systems
Some people, with OS X 10.6 and above, are using the Mac OS X network built-in VPN client.
We all connected without a problem to the previous 800 series router using IPSec with Group authentication and Pre-Shared key.
View 5 Replies
View Related
Aug 16, 2011
We have Point to point T1 environment where 3 additional WAN sites get internet access through our RV042. When we setup load balancing we have problems with https traffic, so we setup protocol binding for https and everything worked great from the local LAN. When trying to access https content from the remote LAN across the WAN the sites failed and I see no option to add additional subnets to the protocol binding. Is there a command line feature that supports adding additional subnets for protocol binding or is the local LAN the only option?
View 7 Replies
View Related
Nov 27, 2011
We have RV 042 deployed for internet access/firewall purposes. Due to growing number for Wireless devices and also to separate WLAN traffic from wired devices, we have created a separate VLAN/IP Subnet for the wifi devices. We are having trouble accessing the internet from the WiFi VLAN/IP Subnet. Cisco 3750 is layer 2 and layer 3 device. We have VLAN 1 (10.10.10.0/255.255.255.0), all wired devices and RV 042 are part of VLAN 1. Connectivity to internet from VLAN 1 is good. VLAN 2 (192.168.1.0 / 255.255.255.0) was created for wifi devices, 3750 does the inter-vlan routing, I have enabled the multiple subnet feature on the RV 042 and added 192.168.1.2 / 24 to the subnet list, we still have issues accessing internet from vlan 2 devices.
As a workaround, I shutdown vlan 2 and added 192.168.1.0/24 as secondary address to the VLAN 1 interface on 3750 and i was able to access internet from 192.168.1.0/24 network with wifi devices also on vlan 1, we want wifi devices to be on separate vlan / ip subnet. Looking at the documentation for RV series routers, it talks about supporting multiple subnets access to internet by enabling multiple subnet feature but it doesn't seem to work.Are there restrictions on having multiple vlans?
View 4 Replies
View Related
Apr 21, 2013
I got : RV180W router updated with the last firmware.Static IP for the DMZ host (Synology Server 212+) My problem is that I had try all combinaison since 10 days to get IP source in synology interface (to block IP's of bad connections...) but, I only see the RV180W adress....So impossible to block bad connections IP.
View 3 Replies
View Related
Feb 11, 2012
I have a pair of RV082 routers and I'd like to configure gateway to gateway VPN tunnel as described in a cookbook, "How to configure a VPN tunnel that routes all traffic to the Remote Gateway," (file name Small_business_router_tunnel_Branch_to_Main.doc). I followed this cookbook and found that my while the Main office has internet connectivity, the branch subnet doesn't have internet connectivity.
Routing does behave as advertised, where all traffic does go to the main office. However, the 192.168.1.0 subnet in the branch office does not get internet connectivity. I've read in other posts that the Main office router will only provide NAT for the local subnet, not the branch office subnet. Is there a way to configure the RV082 router to provide NAT for all subnets?
If not, which Cisco product will provide the VPN Tunnel connectivity as well as the NAT for all subnets? Can the RV082 be used as part of the final solution or are my RV082s a wasted expenditure?
Following is the configuration that I'd implemented, (real IP and IKE keys are bogus).
Gateway To Gateway
Remote Main Office
Add a New Tunnel
Tunnel No. 1 2
Tunnel Name : n1-2122012_n2-1282012 n1-2122012_n2-1282012
Interface : WAN1 WAN1
[code].....
View 2 Replies
View Related
Dec 15, 2012
I would like to ask if what is the difference between RV180W-E-K9-G5 and RV180W-A-K9-NA specifically the -E and the -A. As far as I know -A is the compliance code for Philippines. Am I right? If yes, what about -E? There is a documentation for wireless complaince on Aeronet devices but what about these SB products?
View 9 Replies
View Related
Apr 3, 2013
I have an SRP541W with two ADSL modems attached to it. Both are running bridged mode with PPPoE connections to two different ISPs, (TPG and Telstra Business Direct). The TPG connection is far cheaper, and has a much higher download limit. Sadly, if I leave the router in "load Balance" mode for the WAN, it "prefers" the Tesltra connection because it's faster. I want downloads for movies/music, Youtube, Internet Radio, etc, to go through the TPG connection. Is it possible to do this in the router, or would I need to set up a proxy server, (or some other external device/application)?
View 5 Replies
View Related
Mar 2, 2012
I've currently got my ASA (5505) serving a /28 public subnet. I've ran out of IPs, so my DC has issued me an additional /24 subnet that they have routed to my ASA. What needs to be done on my ASA so be able to use these new addresses? I've been trying to search and not been able to find a good answer (some say I shouldn't have to do anything, everything else references NATing, which I currently don't do and would rather not do).The servers I assign these to, I'd like them to have the public ip assigned directly to them.
View 5 Replies
View Related
Aug 26, 2011
I am setting up my home lab to practice and play around.I have VMWARE ESXi environment with two workstations as my servers.I would like to setup two domains with two domain controllers but i want each domain to have its own subnet.So this is my setup. I have Cable modem from cablevision , thay connects to my router which is Apple Airport which acts as the DHCP server. DNS server and default gateway. The network on the router is 10.0.1.xThen i have two switches . One is a 5 port unmanaged switch that connects to the three physical desktops .Then i have a Cisco small business switch SG200-08 that connects to my ESX servers and NAS. Now currently all is good and working but like i said all my machines physical or virtual get an IP that is 10.0.1.x and they get all this from the router. And i think i can setup two domains with two domain controllers without an issue and they will all get an IP address of 10.0.1.x. This is all good but i want to have one domain on one subnet and other on another so for example one domain will have 10.0.1.x and other 10.0.2.x. I am just not sure what i need to to get this setup like this. I know my SG200-08 supports vlans and i am pretty sure on the apple router you can only have one subnet i think. So can i do this with my current setup by setting up a DHCP server with two scopes ?
View 3 Replies
View Related
Mar 26, 2013
I have an ASA5510 that is connected to outside for WAN, inside for LAN (10.22.254.0/24), and a iSCSI switch plugged into Ethernet 0/3 (10.22.244.0/24). I can ping the Eth0/3 interface (10.22.244.1) but I can't ping across that interface from WAN or LAN side.
START CONFIGURATION
ASA Version 9.1(1)
!
hostname ASA5510
[Code].....
View 7 Replies
View Related
Jun 23, 2011
NAT command on 8.4? I am trying to PAT multipule Inside subnets to an IP address. With the example I found I can only PAT one subnet. If I do it the way I have below, it will end up with the last subnet (3.3.3.0) stay in the config. What is the best way of doing it? I have about 20 inside subnets I need to PAT.
object network obj-Inside-sub1
subnet 1.1.1.0 255.255.255.0subnet 2.2.2.0 255.255.0.0subnet 3.3.3.0 255.255.0.0nat (inside,outside) dynamic 199.246.5.2
View 5 Replies
View Related
Jan 24, 2013
I have a Windows 7 Pro Desktop with an on-board Ethernet and an Axis USB To Ethernet adapter. The on board Ethernet is configured as dhcp and obtain the address 10.162.146.123 with 255.255.255.0 subnet. The Axis USB to Ethernet adapter is static ip configuration with 10.38.25.37 and 255.0.0.0 as subnet. Under the adv settings I have also another ip 11.38.25.37 with 255.0.0.0 subnet. When the Axis is communicating 10.38.0.1 network I can not access the internet using the on board Ethernet 10.162.146.123. I have to disable either one of the cards to access one network at a time.
View 3 Replies
View Related
Aug 26, 2012
I've got an RV180W for my office, and so far it has been great. I have two users that use a certain application that crashes all the time. For some reason, they don't crash when put into the DMZ. Is there any way i can put both of them in the DMZ? I can only figure out how to have one host in the DMZ at a time.
View 1 Replies
View Related
May 23, 2011
I have an existing pair of PIX 515E that has two interfaces. One connected to the public internet via my ISP and one internal.
I recently ran out of IP's and had the ISP route an additional block to public IP of my firewall. This isn't working for some reason and I'm trying to figure out why.
The "ip address outside XXX" command defines the outside address and I don't see any way to add a secondary sub net.
I tried just adding a rule to the firewall for one of the IP's in the new subnet, but I can't seem to get traffic to pass though the device.
View 1 Replies
View Related
Feb 20, 2012
Is it possible to have multiple public IP addresses that are from different subnets going through one router? I have been told that this is not possible with most routers and that I would have to spend a lot of money on a router to be able to do it. I am still not totally clear on what defines a subnet even after reading up on them. What I am trying to achieve:
-My office has 10 computers.
-All would be connected to one router.
-My internet service provider has provided me with 10 public IP addresses, that are all very varied (which I asked for)
View 3 Replies
View Related
Nov 17, 2011
The ASA device is going to be the gateway for multiple distinct inside IP subnets. We can have have a unique outside IP address to correspond to each inside IP subnet if needed, but we need some means for a VPN client or a site-to-site VPN to have acess to a pre-definied IP subnet (i.e. if customer A establishes a VPN connection, they have connectivity to IP subnet X; customer B establishes a VPN connection, they have connectivity to IP subnet Y, etc.).Currently, the two inside IP subnets are 10.10.0.0/16 and 10.20.0.0/16. We will be adding more.The problem we are facing is that we cannot reach the VLAN 201 from the ASA we believe this is because. I have setup two addresses on port 0/1 Vlan1, 10.10.20.2 and 10.20.20.1 as an alias. How can we make traffic for the 10.10.0.0/16 subnet untagged and traffic for the 10.20.0.0/16 subnet tagged for VLAN 201.
View 1 Replies
View Related
Jan 5, 2012
I am new to Cisco products. We have currently got a Netgear FVX538 running in front of a few servers. We currently have 2 ranges of IP addresses provided to us on 2 separate subnets. We configured the netgear box with the first IP addresses of each subnet as the IP address of each of the primary and secondary LANs. This then allowed us to set the gateway addresses of servers on the network to either of those 2 addresses, depending on it's range.
This all worked fine - except for the fact that the Netgear box is incredibly flakey, so we decided to get a Cisco box.
We have gone for the SA520, which I have been trying to configure this afternoon. Unfortunately I am now having concerns as to whether it is possible to configure 2 separate subnets internally on this box in the same way we have done with the netgear box. ie - classical routing, one incoming WAN interface with multiple subnets?
View 5 Replies
View Related
Jun 29, 2012
I have a Cisco 2901 with the 4port gigabit ethernet switch module that I'm trying to get configured to have a seperate subnet for each port. So far I have it set up so each subnet is a vlan, then on each port I use the switchport access vlan command to tell it which subnet I want that port to be on. However, there is one port that I need to have 2 subnets on. The way I found to do that was to use switchport trunking on that port, but it doesn't seem to be working properly. how they would configure this? Right now I have vlan 101 as x.x.x.17/28 and vlan 103 as x.x.x.53/30. I think where I'm getting hung up is the proper association between the physical port and the vlan subnets.
View 5 Replies
View Related
Dec 20, 2010
We have a 6509 that was connected to 2 other locations(location A and B) and our local lan (location MAIN). We wanted to move the location A and B to a 3750 switch and only allow the traffic that needed to access our location MAIN to come through the firewall. The only problem I ran into is that before location A and B were on different interfaces so in the 6509 firewall the routes for traffic to our MAIN location was done by static routes.
I.E.
static (MAIN_intf,A_intf) 192.1.1.72 10.94.10.72 netmask 255.255.255.255 0 0
static (MAIN_intf,B_intf) 192.2.2.72 10.94.10.72 netmask 255.255.255.255 0 0
[Code]....
because it has a static overlap, which makes sense to me, but my question is how do I configure the network to get this to work? Do I have to reconfigure my network and access-list? Do I need to add more ports between the 6509 and 3750? I'm not sure if this is the best way to do what we want. If something is not clear I'll try my best to explain the setup, but I just took over for our I.T. guy when he left.
I put 10.10.10.72 instead I should have put 10.94.10.72. the routed port is on a different subnet than the computer I'm trying to access.
View 4 Replies
View Related
Sep 16, 2012
I have an ASA which is managing internet access from mutiple VLANs configured on a 3560 switch. I want to be able to limit the 100MB internet connection on the ASA on a per subnet (VLAN) basis for the multiple subnets configured on the switch..
so for example
VLAN10 - 10.0.10.0 - limit to 5MB
VLAN20 - 10.0.20.0 - limit to 10MB
VLAN30 - 10.0.30.0 - limit to 3MB
View 7 Replies
View Related
Mar 25, 2012
3750 can not support multiple subnets in it's DHCP server pool config.
Is this an issue that can be fixed with a different iOS or is there a different Cisco switch that I can replace the 3750 with that will handle multiple subnets within an individual pool?
View 1 Replies
View Related
Oct 21, 2012
how i can configure a second ssid for guest access in our environment. this is our network setup prior to this request: Internet----Firewall (not ASA)---ce520---C1131AG and CME router is also connecting to the ce520 switch. we only have two vlans: one for voice and two for data.
Presently, there is no vlan configured on the AP because it on broadcasting ont ssid and wireless users gets IP from a windows DHCP server on the LAN. the configuration on the ce520 switch port for the AP and other switches say access vlan is the DATA vlan which automatically becomes the native vlan for all trunk port connecting the AP and other Stiches to the network.
Now with this new requirement, i have made my research and i have configured the AP to broadcast both the production and the guest Vlans. The two vlans are 20-DATA and 60-Guest. I made the DATA vlan on the AP the native vlan since the poe switch is using the DATA vlan as native on the trunk ports. I configured the firewall to serve as DHCP server for the guest ssid and i have added the ip helper-address on the guest vlan interface on all switches while the windows server remains the dhcp server for the production DATA Vlan. I have confirmed that the AP, switches can ping the default gateway of the guest dhcp server which is another interface on the firewall. I can now see and connect to all broadcasted ssids but the problem is I am not getting IP addresses from both the production dhcp server and guest dhcp server when i connected to the ssid one at a time. My AP config is attached below.
Do i need to redesign the whole network to have a native vlan other nthan the data vlan? Does the access point need to be aware of the voice vlan? Do the native Vlan on the AP need to be in Bridge-group 1 or can i leave it in bridge-group 20?
View 1 Replies
View Related
Mar 15, 2013
I installed the RV180W yesterday and decided to play with it a bit today. I got stuck on the firmware update. Tried different browsers on different PC's. Tried going to 1.0.1.9 first. I have the "reset all configurations" button checked. After looking through the posts here I'm not sure this firmware will even fix my next few problems(port forwarding etc). Is there a trick with this device?
View 4 Replies
View Related
Feb 5, 2013
I'm trying to make the VPN connection between two routers CISCO RV180w.I performed the basic configuration in cisco "server". I did the same in cisco "client".The following configuration and logs, do not know what to do ...
SERVER CONFIGURATION:
IKE Policy Configuration:
VPN Policy Configuration:
CLIENT CONFIGURATION:
[code]....
View 8 Replies
View Related
Apr 9, 2013
We have installed a fiber internet access and have the ONT from the provider already installed.We're trying to use the RV180W to use this internet connection. [code] So I need to configure the router with the .36 static IP on the WAN, and using the .37 gateway and the provided DNS servers. I also need that this WAN is tagged with VLAN ID 20. I'm only able to set VLAN ID on the LAN ports via the admin interface.
View 8 Replies
View Related
Mar 19, 2013
i've installed the new firmware on my router and now the UC is showing 100% all the time. I've tried to factory reset it, it's doing the same thing. If I downgrade to previous firmware, it goes back to normal . I've only 1 PC in my network (test lab), so no big traffic here. is it a bug ?
View 1 Replies
View Related
Oct 3, 2012
I just recently switched from the WRVS4400N to the RV180W. I have 4 VLANs, and I want VLANs 1, 2, 3 to communciate freely, but I DONT want VLAN 4 to communicate with anybody, just Internet access. On the WRVS4400N, I was able to do this using the Firewall > IP Based ACL. I notcied that the RV180W, does not have such an option. I am sure there is something I am missing, I just cant find out how to isolate VLAN 4.
View 5 Replies
View Related
Sep 6, 2012
we've changed our rv042 for a rv180w and now when I try to upload files to my ftp server (vsftpd under centos) it get stuck at 100%.I've changed my ftp server to proftpd instead of vsftpd and everything's ok.but vsftpd isn't the problem since i was able to upload with my rv042 without any problems.so i guess there's a problem with the rv180w security.i've already disable stealth mode and it's doing the same thing when i try to upload to the same server but through the vpn tunnel, everything's ok.So it's really in the rv180w lan->wan routing
View 10 Replies
View Related
