Cisco Routers :: RV220W To Support Dual Band Simultaneously
Jan 11, 2012Cisco RV220W works in 2.4GHz or 5GHz.There is any plan to support these bands simultaneously?
View 1 Replies
ADVERTISEMENT
Dual-band Router With Open Firmware Support?
Jul 7, 2011I'm about to jump on the bandwagon and drop my whr-g125 running tomato for a new wireless-n router that runs tomatousb. I can't seem to find a dual-band one that is supported.
Need:
- Wireless-n dual-band (2.4ghz+5ghz). Doesn't have to be the super fast type.. whatever is entry for this.
- At least 1 usb port for printer sharing
- Prefer gigabit, but I can live without
- Must be able to run Tomato in some form, or if I have to, run dd-wrt as a last resort.
TP-Link Dual-Band Wireless :: Does WNR4300 Support With DD-WRT
Nov 15, 2012Region : Iraq
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : Newroz Telecom
Can I replace firmawre TP-Link WDR4300 to DD-WRT to use it?, either my TP-link already has VPN,NAT,QOS,..etc like as DD-WRT so does need to replace firmware for better?
Does TP-Link WDR4300 support with DD-wrt? Is it working clearly without any problem?
TP-Link Dual-Band Wireless :: TL-WDR3600 - WDS Encryption Support
Mar 1, 2013Region : Italy
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.17 Build 120508 Rel.45884n
ISP :
I've got two WDR3600
the first one is the main router:
- connected to ISP modem
- DHCP on
- 2.4Ghz radio to serve WiFi clients security WPA-PSK
- 5GHz radio to link to the second WDR3600
protocol 802.11n only
the second WDR3600 is WDS of the main router:
- DHCP off
- 2.4GHz radio to serve WiFi clients security WPA-PSK
- 5GHz radio to link to the first WDR3600
protocol 802.11n only
All is working fine, however WDS connection works only with security off. WPA-PSK is not selectable, cannot test WPA2, no radius server available, WEP not supported due to incompatibilty with 802.11n protocol. Is this the expected behaviour? How to get WDS working with WPA-PSK encryption? Could this be due to the firmware or s it a limitation of Atheros chipset?
TP-Link Dual-Band Wireless :: TL-WDR4300 / Any Firmware For Unify Support
Jan 16, 2013Region : Malaysia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : Unifi
I just bought this hardware, I haven't tried it yet. Will tested it when I reach home today. Someone told me that I need to update the firmware. Do I really need this, or I can just simply use the existing firmware?
Cisco Routers :: SSL Email Support On RV220W
Aug 29, 2011I do you not think the RV220W needs to have better E-mail support that the feature it supports at present?No SSL support at all. The only setting for authentication is: Login Plain or CRAM-MD5. Every mail server I use now, supports SSL as the default authentication and not CRAM or Plain, this makes the E-mail feature useless. [code]
View 1 Replies View RelatedCisco Routers :: How To Open Support Ticket For SMB RV220W
Jan 24, 2012I am trying to open a support ticket with Cisco for an SMB router (RV220W) using the link: URL
When I reach the point when I am asked to supply the serial number of the device I do and then I get an error message that the serial number cannot be found in some database. Am I doing something wrong? Am I supposed to register this product's serial number somewhere?
Maximum Transfer Speed On Concurrent Dual Band Routers?
Feb 19, 2012i am going to purchase a Simultaneous Dual Band Router with Gigabit Lan. Can anybody tell me whats the transfer speed it got on Concurrent Dual Band 900(450+450) , 750(300+450) and 600(300+300). I am going to use it for hard drive that can network attached or may be just external hard drive via USB interface.
View 2 Replies View RelatedBelkin Routers :: N750 DB - How To Utilize Dual Band Feature
Dec 1, 2012How do I utilize the dual band feature on my belkin N750 DB? Do I have to set up two separate networks? Even then how when my devices PC, iPod, gaming devices are only recognizing the 2.4GHz band network?
View 3 Replies View RelatedCisco Routers :: Get Status On Mac Lion Or Windows 7 64-bit SSL VPN Support For RV220W?
Dec 12, 2011get a status on Mac Lion and/or Windows 7 64-bit SSL VPN support for the RV220W? QuickVPN (for Windows 7 64-bit users) and IPSecuritas (for Mac Lion users) are our current workarounds, but for folks that use/own their own equipment we prefer SSL VPN. This is why we retired our WRVS4400N v2 for the RV220W.
View 3 Replies View RelatedBelkin Routers :: N600 DB Wireless Dual-Band USB Adapter / Windows 8
Nov 18, 2012I got the N600 DB Wireless Dual-Band USB Adapter in October 2012. How do I install it on Windows 8?
View 1 Replies View RelatedBelkin Routers :: Firmware Compatibility With N600 Hd Wireless Dual Band
Apr 1, 2013I have belkin n600 hd wireless dual band n router f7d8301 v1. do i need to do any firmware upgrade? should i down load and install V3 of firmware of V1 only? i want to increase / enhance the range of WiFi.
View 1 Replies View RelatedBelkin Routers :: How To Bridge N600 DB Wireless Dual-Band Router F9K1102
Dec 31, 2012Is there a way to Bridge N600 DB Wireless Dual-Band N+ Router F9K1102?
View 1 Replies View RelatedBelkin Routers :: Play Max N600 HD F7D4401 Dual-Band Signal Very Weak?
Jun 12, 2013belkin play max n600 hd model F7D4401 Dual-Band signal very week so i need the best setup.
View 1 Replies View RelatedBelkin Routers :: F9L1101 N600 DB Wireless Dual-Band USB Adapter / No Internet
Nov 13, 2012F9L1101 N600 DB Wireless Dual-Band USB Adapter : recognizing and connecting to wireless network but unable to use internet. Changed static IP adress, etc but no luck. Followed instructions on support email response:
Windows XP:
Start->Control Panel->Network Connections(classic view)->Right click on Local Area connection(wired)/Wireless network connection(wireless)->Properties->Select Internet Protocol(TCP/IP)->Properties->Under General tab, choose "Use the following IP address" and type the IP address, Subnet mask and Default Gateway, DNS and press OK.
Type in the ip address 192.168.2.20
Enter the subnet mask as 255.255.255.0
Enter the default gate way as 192.168.2.1
Type in the primary DNS as 4.2.2.2
Type the alternate DNS as 8.8.8.8
Am currently unstalling and reinstalling. The network is WEP with a long alpha numeric key, which was accepted and network detected and connected. No internet. No internet. No internet.
Linksys Wireless Router :: No Connection To 5GHz Band On E3000 Dual Band?
Apr 14, 2010I have the new XBOX 360 black N wireless adapter and the Linksys E3000 dual band router as I want to upgrade the network range and speed to N. I set up a unique SSID and passphrase (WPA2) for both 2.4GHz and 5GHz bands. My XBOX could connect to the 2.4GHz band network and could connect to XBOX Live. But when I configured all the settings and tried to connect to the 5GHz band network, but no luck. My XBOX just said it failed to connect. I was sure that I did type in the SSID and passphrase correctly. I still cannot figure out what went wrong. I even suspected either the wireless adapter or the router malfunctioned.
View 9 Replies View RelatedRouters / Switches :: Netgear 3300 Dual Band Router 5G Mode Quit Working?
Nov 27, 2011I have had the Netgear 3300 Dual Band for three years. Everytime I wanted to access using my laptop, I had to choose between 2.4G and 5G connection. For about a month now, the 5G does not show up. It doesn't show up as a network to select no matter what device I use. I have reset the router and updated the firmware. Both connection lights are blinking. I recently purchased and IPhone 4 and still I do not have the option of selecting 5G.
View 4 Replies View RelatedBelkin Routers :: Put More Than One N300 Dual-band Wifi Range Extender On Home Network?
Jan 17, 2013Can I put more than one N300 Dual-Band Wi-Fi Range Extender on my home network?
View 4 Replies View RelatedBelkin Routers :: Change NAT Type From Moderate To Open For Xbox 360 N450 Dual Band?
Dec 31, 2012How to change my NAT type from moderate to open for xbox 360. Belkin n450 dual band
View 1 Replies View RelatedBelkin Routers :: Dual-Band Wireless Range Extender F9K1106 With AirPort Extreme?
Jan 12, 2013Does the Dual-Band Wireless Range Extender #F9K1106 work with the Apple AirPort Extreme Base Station?
View 1 Replies View RelatedTP-Link Dual-Band Wireless :: DHCP Not Working For 6 GHz Band?
Apr 2, 2013Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP : Centurylink
I'm using a WDR3600 router, and I'm having difficulty with getting internet access on the 5 GHz band. Right now the router is broadcasting in both 2.4 and 5 GHz as two separate APs. The 2.4 GHz band works perfectly fine, but when I connect to the 5 GHz band my device is not assigned an IP address and cannot connect to the internet (or even the router configuration page). Unfortunately, I don't have another device capable of accessing the 5 GHz band, so I can't check to see if the computer is at fault, but both the computer and the router have worked together with no problems before, and this computer has done fine in accessing other 5 GHz bands.
D-Link DCS-930L :: Camera Support Multiple Destinations Simultaneously?
Aug 31, 2011Can the camera support multiple destinations simultaneously?
In testing set-up for ftp and email, while observing results in a browser on the Mac, and also MyDlink app on an iPad, I observe that a few jpegs get sent to email, a few to ftp, and MyDlink keeps "timing out". My Mac is wired gigabit ethernet to the router, and the wireless LAN is 802.11n.
Maybe it can't handle multiple destinations?
Does MyDlink cause continued transmissions at the video frame rate set in the setup panel, even if no one is connected to look.
Belkin Routers :: Update F9L1101 N600 DB Wireless Dual-Band USB Adapter From Windows 7 To Windows 8
Nov 25, 2012My new Windows 8 computer is not wi-fi capable, I bought the adapter but it only works with Windows 7, they have a link to upgrade to Windows 8 but I don't know where to go from there.
[URL]
Linksys Cisco Dual Band Pci Adapter?
Oct 25, 2011why is my connection to the interet so bad wh=ith this card i have windows 7 64bitalso my connection to the internet on my laptop is fine but my pci card keeps stopping and low connection when it does start it takes really long for google to load up but on my laptop it loads straight away?
View 1 Replies View RelatedCisco Wireless :: 2602E Run As Non-Dual Band?
May 27, 2013We had been purchasing the Aironet 1242AG's but found they are discontinued and we should purchase the 2602E Standalone device. I have noticed that all the antennas are dual band and support MIMO. In the past we would just buy a splitter box and connect it to one of the antenna ports on the AP, and then run cables to antennas and connect those to the splitter box. The antennas were just standard 2.4Ghz 3-5 dBi. We would set that one radio on the AP to transmit and receive. Now I am wondering if this whole setup will change on a 2602E because of the MIMO?I have seen there are MIMO antennas and I am trying to figure out what is compatible and what is not. Is my old way of doing this still going to work but we'll only see G speed? And to get N speed do we need the MIMO antennas in place?
View 5 Replies View RelatedCisco Wireless :: Dual Band On AP541
Jul 24, 2011I just got 3 AP541, the reason for getting this was the dual band , but how to get this AP to actually give both 2.4 and 5 GHZ at the same time?
I have in my other office a Asus RT56, it costs about 1/3 of the Cisco and this supports both 5 and 2.4 GHZ and i get a 450 mbit connection, can only get 130 on the Cisco.
D-Link NWA-160 A2 Dual Band Slow?
Jan 29, 2013I have just bought a D-Link DWA-160 A2 network adapter and it is really slow.I have been using a D-Link DWA-125 N 150 A2 for a while now and it is faster, getting a higher signal.My new network adapter is suppose to be faster.The only thing I can think of is that the software coming with the adapter never installed. I get an error: Wireless adapter not found! insert the adapter now.Thing is, the driver is installed and I can surf the internet.I did some speedtest net tests and I see that my DWA-125 A2 is faster.
View 4 Replies View RelatedCisco Wireless :: WLC 7.4 Dual-Band Radio Section
Apr 9, 2013Not sure if it's new in WLC 7.4 code, but I now see "Dual-band radio" section everywhere in addition to "802.11a/n" and "802.11b/g/n". My dual band APs (for example 2600's) show up under both 802.11a/n and 802.11b/g/n as in the past. So what is this new category "dual-band radio" for then?
View 3 Replies View RelatedUsing A Dual - Band Router As An Access Point?
Mar 29, 2011I'm networking a clients home and he specifically wants dual-band wifi through-out. Now he has a fairly large 3 story house, and wanted to place an access point on the top floor to be assured he'll have strong and reliable signal. He's going to have multiple TV's wired into the network, as well as computers, laptops, phones, a Xbox 360 and a PS3. Were using Gigabit switches and a D-link Simultaneous Dual-band Gigabit router.The modem, router, and main 16 port switch will be in his basement in a semi-server room. He currently has 12 lines run throughout his house, 3 to the top floor, 5 to the main floor, and the ability to lay some in the basement if he needs. The 16port switch will plug into the router, I'm also putting an 8 port into the router from the main and top floor. The remaining lines will plug into the switch in the basement. On the top floor I was going to install an AP or Router turned into an AP into the 8port switch.Now the only reason I am considering using a router instead of just getting an AP, is that neither of us can find a simultaneous Dual-band AP. It seems the only simultaneous DB out there is in routers. So, my question is, will I be able to easily use a router as an AP AND get simultaneous Dual-band out of it if I do so? Is there a Simultaneous Dual-band AP on the market that would a better investment?
View 1 Replies View RelatedDual Band Broadcasting / Only 1 Works At A Time
Feb 10, 2012I'm trying to save a neighbor some money by fixing their wireless network.WNDR3700 Dual band Netgear router.2.4ghz wireless b/g/n with enabled SSID broadcast, channel= auto, mode set to 130Mbps WPA-TKIP + WPA2-AES. wireless isolation is not enabled.5Ghz wireless a/n enabled SSID broadcast, channel = 44, Mode is up to 300Mbps..No security encription. (i know...bad, but the lady has lots of kids and family members coming and going from the house so she doesn't want one encripted). Video network enabled..Both Radio frequencies are enabled, fragment and CTS/RTS set to max WPS settings = keep existing. IPv6 not enabled, No repeating is enabled, No guest networks are enabled(however ssid broadcast is enabled for guest profile 1)The problem, and reason for fixing the problem is that the 2.4 Ghz band light on the router is ON however the SSID is not being seen by any client in the house. the netgear interface says it is on and working. the neighbor needs the 2.4ghz band to work because the printer is wireless and will only recognize 2.4Ghz SSIDs. Also they have older nintendo DS clients they would like to use on the network.During the day the 5 Ghz band works with very seldom (1-2) disconnects while the 2.4 Ghz band wont be visible to any device. in the evening both bands will come online, and very often will every computer get disconnected from either, the 5Ghz band will stay online longer than the 2.4 band and it seems as though every 10 minutes everyone gets disconnected from 1, and then all the sudden the other band will start working. once every so often both bands will be visable by all computers however only 1 will work.
-Updated the firmware, appeared to fix the problem. Fix only lasted for about 5 hours.
-turned off the router and modem to let them sit. restarted both multiple times.
-Called netgear tech support, asked me about firmware, restarting, then rerouted me someone with more broken English and a horrible phone connection than ive ever seen or heard. then they tried to charge me 30$ for a 1 time. or 100$ for the year. might as well buy a new router at this point in costs.
My personal fix would be to just broadcast on the 5ghz band and wire the printer to the router, buy another router and broadcast the 2.4 ghz one from it, but the lady wants it all to work with the one router. i dont know if the networked has ever worked as intended and ive spent hours reading forums.the main issue is leaving her with internet that she and her family can use so kids can do homework and stuff after i leave the house.
Netgear N300 Dual Band Route Lag?
Jun 25, 2011I have recently purchased a netgear N300 Dual Band router. I am getting some problems with it! I replaced my bog standard belkin 54g router (which never dropped out, never lagged), you just plugged it in, stuck your isp settings in and away you went. Not the same story with this netgear, it promises to give you a better connection in game, but since installing it, all games lag, my laptop is slow browsing, it is getting to the point where we cannot game at all and I am giving up waiting for websites to load! My xbox is connected with ethernet my laptop is wireless, but both lag. Is it to do with the router settings? I am running windows 7 on the laptop, windows xp on another desktop pc, 2 xboxes, one wired one wireless and a wii wireless. All lag!
View 6 Replies View RelatedAr8152 NDIS 6.2 - How To Setup Dual Band
Jun 10, 2012When I try gaming on my computer and someone else is gaming on the ps3 or is on another laptop I run into lots of lag. I've upgraded my internet service for more bandwidth, I forget exactly how much it is. Anyway, I want to connect my normal devices on the 2.4 and my two gaming computers and ps3 on the 5.0. How do I do this and how do I know if my computers and ps3 are even compatible with the 5.0?
The Network adapter for one of the computers is atheros ar8152 NDIS 6.2
Boosting Netgear Dual Band Router?
Dec 21, 2012I use a Netgear Dual band router and it works great. I was messing with a PC i bult and screwed something up(of course) I couldn't get a strong signal on either band. I have a Belkin wireless N router that I dont use, can I use it to boost my signal?
View 1 Replies View Related