Cisco Routers :: Convert The RV082 File To Work In A RV042?
Sep 22, 2011I have tried to load the config file from an RV082 to an RV042 with no luck.Is there a way to convert the RV082 file to work in a RV042?
View 3 Replies
ADVERTISEMENT
Linksys Wired Router :: RV042 - Convert EXP To Config File To Restore Backup Into New Router
Jun 7, 2011I have a problem with the router Linksys RV042, I made a backup of it that contains a file with the extention .exp Now we have buy a new Rv042 made by cisco and the backup file is .config the question is how I convert the .exp file to a .config file so I can Restore the backup in to the new router?
View 1 Replies View RelatedCisco Routers :: Are RV042 And RV082 SIP Aware?
Jul 18, 2012Are the RV042 and RV082 routers SIP AWARE?I haven't had any luck finding documentation stating such.
View 2 Replies View RelatedCisco Routers :: RV082 Backup File View?
Sep 19, 2012Is there a way to view the contents of the .exp file generated from exporting the configuration from RV082? I've got a couple of RV082 that have the same rules, but want to compare the configuration.
View 2 Replies View RelatedCisco Routers :: RV082 V3 - View Configuration File?
Feb 27, 2013Currently, the backup config is not human readable...any way to convert this?
View 1 Replies View RelatedCisco Routers :: RV042 To RV082 Tunnel / NAT-T And Slow Performance?
Feb 18, 2013I have an RV042 VPN tunnel with an RV082.The RV042 has a public IP Address obtained by PPPoE, the RV082 has a public IP Address obtained via Static IP.The problem I see is a really slow performance. Both internet conections are idle and the performance is about 2 or 3 kbyte/s My question are if I should I enable any of this:
- Agresive mode
- NAT Traversal
- IP Compresion
- Dead Pear Detection
How can I troubleshot this slow performance?
Cisco Routers :: How To Redirect Internet Traffic From RV082 To RV042 Through A VPN
Feb 24, 2013We have offices in USA and Venezuela.In our USA office we have a RV042 router and in Venezuela we have a RV082 router.We have connected a VPN tunnel (gateway-to-gateway) between both offices.
The point is:How could we redirect the internet traffic from our Venezuela office (RV082) to the USA Office (RV042) to navigate using USA public IP's?
The reason for this is that we need to use online streaming services which are only available for IP's from USA and we can't use them from the Venezuelan IP's.
We can not use the PPTP option since the equipment which will use the streaming services (like hulu, crackle, etc.) in Venezuela is a Google TV device which doesn't allow the configuration of proxy navegation or PPTP VPN connections itself. That's the reason why we need to do that through the routers.
Cisco Routers :: RV082 / RV042 - Can't Remotely Administer Through VPN Connection
Nov 19, 2012I have an RV082 and a RV042. I have been able to successfully establish a gateway to gateway vpn connection between them both, but both Routers unable to ping each other and I can't remotely administer each router through the VPN connection.
View 1 Replies View RelatedCisco Routers :: RV042 And RV082 Difference Between Logs Action
Apr 20, 2013I have RV042 V01 and V03 and RV082 V03.I'm wondering if there's a difference between the default actions taken by the "Logs" interfaces?
In the case of the V01 systems, it appears that I get a Security Notification every hour.In the case of the V03 system, it appears that I rarely get a Security Notification.
Cisco Routers :: RV016 / RV042 / RV082 Internal Port Forwarding?
May 16, 2012I'd like to setup a WCCP in those routers, but as I read, it's not possible.
Another way to circumvent this limitation is to foward a request to the router from the LAN port 80 to a LAN IP, something like:
LAN 1 192.168.1.100:80 -> router -> LAN 2 192.168.1.101:80
Cisco Routers :: RV082 DNS Local Database Doesn't Work
Feb 25, 2012I recently upgraded the firmware to 2.0.2.01-tm (from 2.0.0.19-tm). Now I noticed the RV082's local DNS server ("DNS Local Database" feature) does not work any more. Any URL-IPaddr combo I used to put in there was resolved prior to sending a request to the WAN's primary/secondary DNS server. It isn't a PC problem. I tested on different real and virtual machines, windows and Linux. Is there new "enable" switch somwhere?
View 3 Replies View RelatedCisco Routers :: Software VPN Does Not Work On RV042
Jun 15, 2011Today i have a Linux computer as a router and it works fine, but when i change to my RV042 the software VPN stops to work (VPN Direçáo) on the computer. We use this software VPN for the card payments (D-TEF) so i have to get it to work. I opened the same ports as i had in the Linux on the RV042 did not work, i opened all port on the RV042 did not work, i put it in DMZ mode and it did not work, i opened it all to the IP address of the computer that has the program on it. The computer with the VPN software has a fixed IP adress.
View 7 Replies View RelatedCisco Routers :: RV042 V3 And XBox 360 / Can't Get Open NAT To Work
Dec 14, 2011How to set this new router up correctly in a way that they can get open nat with one Xbox on the network?I have tried to setup the router so that I port forward the following ports:
UDP/TCP | 3074
TCP | 80
TCP | 88
UDP/TCP | 53
The xbox is setup with a static ip address:
IP | 10.141.167.50
Subnet Mask | 255.255.255.128
Gateway | 10.141.167.1
In addition to simple port forwarding, I setup access rules in the firewall with any source to go to the 10.141.167.50 single ip destination. I have also tried with port forwarding off, but upnp on, and the ports setup specifically in that screen for this xbox. Finally, I disabled the port forwardingin the upnp, as well as the port forwarding screen and simply setup port triggering, while leaving the upnp service enabled. After all of that, the xbox would not get open nat. It doesn't make any sense to me that this doesn't work. I even tried turning off all port forwding and triggering and putting the xbox in as the dmz host. No dice. I'm honestly thinking now that there is a problem in the firmware or something that requires some special workarounds. I'm on the new firmware (i.e. 4.1.0.2) and at the end of my rope.
Cisco Routers :: RV042 Protectlink Did Not Work After Reboot
May 7, 2012I have activated Protectlink Web. But today i started to get "router is busy" in all pages, so we restarted the router. That problem was solved but now the the web Protection is no longer working. It says activated but licence status says waiting.
View 1 Replies View RelatedCisco Routers :: Why Didn't Content Filter Still Work In RV042
Jul 25, 2012I want to make a question about RV042. I used RV042 router in my office. I used content filter feature in router.Althought this have not been apply the rules. I think I made wrong rules.I enabled the block enable forbbiden domain .And then added the websites that I want block.However, these websites are still browsing in local computer.
View 4 Replies View RelatedCisco Routers :: Will RV042 Work With AnyConnect Secure Mobility Client App
Jun 15, 2012Will the RV042 work with theAnyConnect Secure Mobility Client app? If so, is there and app note available? If not, which routers wil work with this app?
View 5 Replies View RelatedCisco AAA/Identity/Nac :: ACS 4.2 - Convert Dmp File To Another Format?
Jun 16, 2011Is there a way where I can just export the clients from one server and restore them onto another?
Is tehre maybe a way to convert the dmp file to another format, like csv, then modifying it and converting back to dmp?
Sharing :: Convert M2TS File To AVI?
May 17, 2011My Sony video camera saves in .m2ts. I need to convert the file to .avi for editing. Is there freeware available and what should the settings be for the best quality. Can PMB � Picture Motion Browser export to AVI?
View 1 Replies View RelatedLinksys Wired Router :: Getting RV042 And RV082 Throughput?
Feb 17, 2008I am currently using Netgear FVS338 Routers / VPN Devices in 3 different locations and honestly I am not happy / impressed with them whatsoever.I have been doing some research and came across the Linksys RV042 and RV082 devices that caught my eye. The question is what is the VPN throughput of these devices?I have gone over the website, spec sheets and they only really say the throughput of the LAN Links and not the WAN Links. I currently have very reliable 20Mb+ Synchronous connections between all 3 sites and have not been able to get any good performance out of the Netgear devices and contacting their support is a joke. They can't tell you anything other than it should work or we will swap out the unit. Well if I have 3 of them that have been purchased at all different times I don't believe that they are all having the same issues. What these units 3DES VPN Throughput and will more than likely be purchasing 3 of which ever once suits our needs immediately.
View 9 Replies View RelatedLinksys Wired Router :: RV082 VPN Pass-through Not Behaving As RV042?
Aug 15, 2012We have almost identical networks in two offices, with the only difference being, one uses an RV042 and the other an RV082.The setup is: two WAG54GS ADSL modems carry PPOA ADSL connections with static IPs to the two WAN ports of the RV0XX.The WAG54GS routers are configured to DMZ all incoming traffic to the relevant WAN IP of the RV0XXs. VPN pass-through is also set on them. The RV0XX port forwarding is set to forward a selection of traffic such as, PPTP, HTTP, HTTPS, RDP, POP3, SMTP and Remote Desk to the external adapter of an SBS 2003 server which processes all operations including ISA and Exchange.Mail for Exchange arrive through both ADSL connections for redundancy. VPN connection requests from remote users to the SBS come in through both ADSL connections.The office fitted with RV042 works fine and does all the following without problems.The office fitted with RV082 has issues. Remote VPN requests comming from ADSL to WAN port 1 of the RV082 connect successfully to the SBS2003 server, but the VPN requests coming from ADSL to WAN port 2 fail to connect! Similarly, incoming mail destined for Exchange don't get through if coming from ADSL of WAN port 2.I have updated the firmware on both RV042 and RV082, but the RV082 still has the above issues.
View 1 Replies View RelatedLinksys Wired Router :: RV042 / RV082 Timeout Bug Found
Jan 23, 2008telnet/ssh sessions time out after 30 minutes of in-activity This only happens in the case of a server that is setup behind the firewall, and of course port forwarding is used. If one unchecks the radio button for the enable firewall the sessions do not timeout at all. This is very reproducable in all recent (1.3.9) versions of RV042 and RV082 routers.
View 2 Replies View RelatedLinksys Wired Router :: How To Redirect Internet Traffic From RV082 To RV042
Feb 24, 2013In our USA office we have a RV042 router and in Venezuela we have a RV082 router. We have connected a VPN tunnel (gateway-to-gateway) between both offices.
The point is: How could we redirect the internet traffic from our Venezuela office (RV082) to the USA Office (RV042) to navigate using USA public IP's?
The reason for this is that we need to use online streaming services which are only available for IP's from USA and we can't use them from the Venezuelan IP's.
We can not use the PPTP option since the equipment which will use the streaming services (like hulu, crackle, etc.) in Venezuela is a Google TV device which doesn't allow the configuration of proxy navegation or PPTP VPN connections itself. That's the reason why we need to do that through the routers.
Linksys Wired Router :: RV042 Config Backup (EXP) File
Aug 2, 2009I need some info on how to open an RV042 config backup (.exp) file. I recently had an RV042 that got very wet and it is now dead, and I do not have another on hand. BUT I do have the config Backup that includes the user MAC authentication list that I really need. Is there a way to get this information other than loading into another RV042.
View 4 Replies View RelatedLinksys Wired Router :: RV082 / Remote Desktop Into Network Won't Work
Aug 8, 2012First time VPN newbie. I need to set up vpn for a friends small business using RV082 so, as a test, I set it up here at my home using a very basic config. The network topology looks like:
cloud => cable modem => RV082 => DIR655 => win7 PC
At a remote site, I fire up QUICKVPN, enter necessary data and successfully connect. Bring up Remote Desktop and put in the IP of my home pc and the logon username and, after a minute or two, it says "unable to connect to the computer" (or words to that effect). My home PC has been configured to allow remote desktop connections and this has occured in the past but not since the RV082 installation. There is nothing in the PC's logs nor in the RV082's logs.
Sharing A File Does Not Work?
Sep 12, 2011I have XP sp3 on my desktop and a new netbook with Win 7. I have set up wi-fi networking between them and have had some success of sharing a file. Today, I wanted to share my Firefox profile from my desktop to my netbook. I clicked on share this folder and could not find it on my netbook. I did a search with the title and nothing appears.
View 12 Replies View RelatedRouters / Switches :: How To Convert From Wired To Wireless
Mar 20, 2011I'm trying to upgrade my existing Netgear wired router to a Netgear N600 wireless router. I was really hoping just to replug in everything and go. But because the wired router is setup for 192.168.1.1 when I plug in the wireless router it thinks nothing is plugged in because it too wants to use that IP address. How do I disable the wired settings
View 7 Replies View RelatedRouters / Switches :: To Convert UTStarcom WA3002G4 Into A Hub For Lan
Jul 9, 2012My super awesome desktop with the regular gigabit, on board lan card (on Win7).A laptop, with wireless connectivity (again on Win7).A modem, UTStarcom WA3002G4 with an internet connection from BSNL.The modem is a wireless modem.Now for my question.I want to be able to connect the laptop and the desktop in a single LAN connection, so that i)I may play NFS Most Wanted on both the laptop and desktop through the LAN play.ii) I may share files and folders, fast and without any hassles.*though mostly only the firstSo, this being my completely descriptive question.
View 4 Replies View RelatedCisco Routers :: VPN Between Two RV082 Routers Not Working?
Aug 7, 2012We're getting the following message in the logs when we ry to connect: encrypted Informational Exchange message is invalid because it is for incomplete ISAKMP SA
One of the router is a V2 and the other is a V4 if that makes any difference.
Routers / Switches :: Convert 2Wire Router 38000HGV-b As Wireless Access Point?
Jan 11, 2013I just switched over from AT&T Uverse to time Warner cable for Internet. I bought a Motorola Surfboard sbg6580. I have the surfboard hooked up and all is well. Now I would like to do in put the old 2wire from AT&T in a room upstairs and use it as place I can plug in the Ethernet cords and also transmit another signal. I have what's a called plug link that is plugged in down stairs and then another upstairs and it allows the Internet signal to run through the power lines. So it just about the equivalent of running a cord for down stairs to upstairs. So basically I just need to plug more then 1 thing upstairs that isn't wireless and I would also like to transmit a 2.4ghz signal upstairs and use my Motorola to transmit a 5ghz.How would I set up the 2wire to do this.
View 3 Replies View RelatedLinksys Wired Router :: RV042 WAN2 Port Doesn't Work
Nov 21, 2012Continued from [URL] which appears to have been closed by a moderator with a reference to Cisco small business website, but the registration there doesn't work, all buttons are inactive etc.
I just need to know what to do with this RV042. I have two modems, a cable and an ADSL. Both are configure correctly, in bridge mode. Both work fine when connected to WAN1, but when connected to WAN2 they never go online (dont' get IP address). The connect lights are on but they never go online.
Firmware Version: 1.3.13.02-tm
Cisco Routers :: Auto / Programmatic UPnP Port Forwarding For RV042 And E4200 Routers
Jan 24, 2013I have RV042 and E4200 routers . I tried the manual UPnP port forwarding using Rv042 router and was succesful ( by typing 192.168.1.1 in the explorer and logged in using user name and password )
I am using a linux embedded system whose Internal IP ,Internal port are mapped .This system is connected to one of the LAN ports
I want to try auto UPnP port forwarding both for RV042 router and Linksys E4200 routers
After enabling the Upnp option only and logging out ,Can i add a port mapping entry in this router without logging in using a C++ program which runs on linux embedded system .
Cisco Routers :: RV042 / RV042G / Small Business Routers With Inter-VLAN Capability
Aug 22, 2012I was looking for a small business router that has VPN support and dual WAN support for load balancing. Upon reading reviews, I think RV042/RV042G is a good choice. Now am thinking if it supports intervlan/ router-on-a-stick configuration?
View 5 Replies View RelatedCisco Routers :: LAN To LAN Routing RV082?
Jan 29, 2013We have an RV082 setup with WAN to the internet and LAN IP of 192.168.188.1.If I add a static route like so:
network: 192.168.166.0
mask: 255.255.255.0
gateway: 192.168.188.2
hop count: 1
interface: LAN
The device with IP 192.168.188.2 will be connected directly to one of the LAN ports on the router.Will that work to route, trying to get to 192.168.166.0 to the IP of 192.168.188.2?It just seems odd because the packets would hit the router then go back out through the LAN port.
