Cisco :: Sup720 - Supported Slots On A 6513?
Nov 28, 2011Can the sup720b be used in any other slot on a 6513 besides 7 and 8?
View 1 Replies
ADVERTISEMENT
Cisco Wireless :: 6500 - Why WiSM2 Not Recommended In SUP720 Slots
Jun 27, 2012I have a situation where a customer doesn't have the required power units installed in their 6500 for me to provision a WiSM2.They use a VSS pair with a single Sup720 in each. They have no intention of adding a second Sup to each chassis.
I need to justify why they can't use slot 6 (which has power reserved) if I am to get them to upgrade the PSU's. The documentation I've found says it is supported but not recommended.
Cisco Switching/Routing :: IOS Latest Stable Version 6513 With Sup720
Mar 29, 2012I have Cisco 6513 with sup720 running s72033-adventerprisek9_wan-mz.122-18.SXF8.bin. I would like to upgrade with the latest and stable IOS.
View 5 Replies View RelatedCisco Switching/Routing :: Different Netflow Export Profiles On Cat 6513 With Sup720
Aug 28, 2012Is it possible to have one netflow export profile (may not be the right word...) to send all the flow information to one collector and another profile to only send traffic to and from centain IP addresses to another collector? If it is possible on the hardware and software, any quick sample config?
#sh ver
Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXH4,
#sho module 7
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
7 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAL1115LJBR
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
7 0017.9444.9814 to 0017.9444.9817 5.3 8.4(2) 12.2(33)SXH4 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
7 Policy Feature Card 3 WS-F6K-PFC3B SAL1115L2NH 2.3 Ok
7 MSFC3 Daughterboard WS-SUP720 SAL1115LH7W 2.6 Ok
Mod Online Diag Status
---- -------------------
7 Pass
AAA/Identity/Nac :: SUP720 ISE Supported Switch IOS Version
Apr 18, 2012The table referenced in the new 1.1 ISE guide show 12.2(33)SXI6 is the minimum version for support. Does this mean this version or above? Does ISE is tested in newer SXJ streams? We have a massive rollout of SUP720s to do and need to know the most stable version to load in preparation for ISE.
View 1 Replies View RelatedCisco Switching/Routing :: Is WS-SUP720-BASE Supported In 6509-E Chassis
Nov 29, 2010I have a heck of a time finding this kind of information on the cisco site...Is the WS-SUP720-BASE line card a fully supported module in the 6509-E chassis?
View 4 Replies View RelatedCisco Switching/Routing :: 6513-E / 6513 And WS-X6748-GE-TX Compatibility
Oct 29, 2012we have a chassis 6513-E and a module WS-X6748-GE-TX, I'd like to know if could I put this module in any slot, since the documentation from Cisco says that any slot from a chassis 6500-E Series can support this module. And then in the documentation of WS-X6748-GE-TX says that this module is not compatible in the slots 1-8 of the 6513 chassis, only from 9th to 13th slots, in those slots from the 6513-E we already have 4x WS-X6748-GE-TX, and we'd like to know if could we put the module in the rest of the slots. The 6513, and 6513-E is kind of confusing.
View 4 Replies View RelatedCisco WAN :: 2811 - Transport Two Time Slots Over IP Network?
Aug 20, 2011I would like to transport two time slots (TDM traffic) over an IP network in order to connect two telecom devices located in different sites, i have cisco 2811 routers on both sites with ip advanced services 12.4.20T IOS
View 5 Replies View RelatedDell :: XPS 9000 Are Expansion Slots PCI Or PCI Express
Jan 7, 2013I want install a wireless card--dual band, N, -- in my Studio XPS 9000 desktop. I have a dual band router.My questions:
1. Are the expansion slots PCI or PCI Express?
2. What card is recommended?
Cisco Switching/Routing :: 6509 Has Four Module Slots Empty
Apr 1, 2013I have a cisco 6509 (ws-c6509-e) IOS 12.2.(18)SXF6 with the following modules and submodules: [code] I would like to add another module, I have WS-6816-GBIC or WS-6516-GBIC which one will work with my 6509 ? The 6509 has four module slots empty: 4-7-8-9, Can I add the card in one of these slots ?
View 10 Replies View RelatedCisco Firewall :: 5510 Have 1 / 4 Memory Slots Without Having To Open Chassis
Aug 10, 2010Is there a way of ascertaining whether my 5510's have 1 memory slot or 4 memory slots without having to open the chassis?
View 6 Replies View RelatedFitting PCI WLAN Card To A Desktop That Has Only PCIe 2.0 Slots?
Jun 4, 2011when I browse for internal WLAN cards for my new desktop their interface is described as "PCI 32 bit", which is weird because expension slots on new desktop mobos are all PCIexpress.I know the PCIexpress's interface is physically different then PCI's, and that it carries 64 bits.So, will that work? Do you know internal cards that with PCIexpress interface?
View 3 Replies View RelatedCisco Switching/Routing :: 2960 Switch Hanging With SFP Module Slots
Sep 2, 2012My Cisco 2960 Switch hanging problem (does not work or LED light), when i removed SFP module slots its working fine.
View 1 Replies View RelatedBelkin Routers :: Access Control On AC1200 Does Not Allow Time Slots
Apr 21, 2013Access Control on an ac1200 does not seem to flexible enough to include hours from say 8pm - 6am. On my old Linksys I would simply have multiple entries for the same MAC address but this does not seem possible.
View 1 Replies View RelatedCisco WAN :: Can Populate All 4 EHWIC Slots In 2911 Router With VWIC3-4MFT-T1/E1 Cards
Mar 12, 2013Can I populate all 4 EHWIC slots in a Cisco 2911 router with VWIC3-4MFT-T1/E1 cards supporting clear channel T1 data traffic?Or do I need a higher performance router inthe 3900 series to do this?The data sheets lead me to the conclusion that I can but I just want to validate this.
View 6 Replies View RelatedCisco Infrastructure :: HWIC-2FE Fails To Pass Ping Packets Greater Than 449 In Slots 0 Or 1
Apr 9, 2013When we install an HWIC-2FE card in slot 0 or slot 1 of a 3845, the interface fails to pass any ping packet greater in size than 449 bytes. It works fine up until that limit is reached, but then fails completely on a larger size packet. If we move to slot 3 or slot 4 on the 3845, the card works just fine! I have looked through the cisco official bug tracker for HWIC-2FE, but could not find a similar symptom listed. We're running advanced ip services 12.4(24)T7 code on the routers. Any software fix or if this is a platform problem with the 3800 series.
View 3 Replies View RelatedTP-Link 300Mbps Wireless :: Expanding Port Forwarding Slots For WR-941N?
Dec 31, 2012Region : UnitedStates
Model : TL-WR941ND
Hardware Version : Not Clear
Firmware Version : 3.12.5 Build 100929 Rel. 57776n
ISP :
I have a TP Link router model number: WR941N (under hardware version it says "v2/v3", that's why I put "not clear" under "hardware version" in the form). Whether it was possible to add even more slots for Port Forwarding for this router, the current hard limit is 16, and I would like to have more than that, what would be the procedure to do so?
Cisco WAN :: 7600 - QoS On Sup720?
Oct 16, 2012I have a strange QoS problem with one Cisco7600 (sup7203BXL, IOS 12.2(33)SRE6).
This is layer 2 traffic,and all ports are L2 dot1q trunks:
1) Packet comes with DSCP 46 on Gigabit port (WS6728-SFP) with "mls qos trust dscp" configured. It goes out the port of the same card/slot with DSCP 0.
2) packet comes with DSCP 46 on different Gigabit port on the same card/slot with "mls qos trust dscp" and also "mls qos vlan-based" configured. It qoes out out the port with DSCP 46.
Why the switch behave differently if "mls qos vlan-based" is configured on port (or to say it works correct since it doesn't override DSCP)?
I have global command "mls qos rewrite ip dscp" since this 7600 is also MPLS PE router and I found in documentation that "mls qos rewite ip dscp" is mandatory for QoS on MPLS (EXP bits). So I can't turn off "rewrite ip dscp". Again the problem that I presents is L2 problem not MPLS (MPLS is used for different traffic).
Also mls qos mappings are ok COS to DSCp are 5 to 46 and vice versa.
Furthermore, as far as I know if I have configured "mls qos trust dscp" on Gigabit ethernet port, switch (7600) should work in this order:
- make internal DSCP from packet DSCP
- since I don't have configured DSCP mutation DSCP should stay the same (46)
- using map DSCP - COS ( 46 -5 ) switch will choose queue on outgoing interface in regards to mapped COS
Cisco VPN :: 6500 Sup720-3B SPA IOS SXI - GRE Tunnel Will Not Come Up
Apr 26, 2011Cisco 6500 Sup720-3B SPA IOS SXI - GRE tunnel will not come up.It worked fine on SXF code, but the crypto map can not be applied on tunnel interface.The iskmp is up with the OM_IDLE The crypto give it a Cryto UP, the the Tunnel does not come up. It is UP down.Does some one have a working config with a 6500 IOS SXI Train with GRE IPSEC Tunnel?
View 1 Replies View RelatedCisco WAN :: SUP720 / GRE Traffic Which Is Not Processed In CEF?
Jan 10, 2008we have some problem with GRE traffic which is processed by CPU and not by CEF.In sniffed packets I can see a lot of "TCP window update" packets. I found that some kind of GRE traffic are forwarded to CPU, like packets with IP options or TTL=0 but non of those are seen in the sniffed packets.
View 2 Replies View RelatedCisco WAN :: SUP720-3BXL / Using Of ECC Or Plain Memory?
Dec 7, 2010i know that Sup720-3BXL has been used the SDRAM.but i don't know that which of memory? using of ECC or plain memory?if use the plain SDRAM, how can prevent to parity error?
View 1 Replies View RelatedCisco Application :: 6509-E SUP720 And SLB Limitations?
Mar 21, 2012We are looking into replacing our current Windows NLB configuration with a SLB solution as NLB creates some nasty multicast traffic.
We are currently curious about the limitations for running SLB without a dedicated ACE Module, will it handle line-rate speed (1 and 10 gbit) with SLB?
Does VSS introduce any limitations for SLB? Any other pitfalls/limitations we should be aware of?
Hardware info: 2x WS-C6509-E in VSS with VS-S720-10G (VS-F6K-PFC3C) running s72033-ipservicesk9_wan-mz.122-33.SXI7
Cisco Switching/Routing :: How Many Session Can Use In Sup720-3b
Aug 30, 2012I will use function of span in sup70-3b.How many session can use in sup720-3b? For example, 2 or 4 session.
View 1 Replies View RelatedCisco WAN :: Migrating Sup720 Configuration To Sup2T?
Jul 4, 2012migration of an existing Sup720 configuration to a new Sup2T. At present we have a Sup2T chassis in the lab running 15.0(1)SY1 and a production Sup720 chassis running 12.2(33)SXI5.I've taken a copy of the production startup-config, renamed it to 'startup-config-BGFL_6509_MBAS-020712' and copied it to the bootdisk (and slave bootdisk) of the new Sup2Ts.I've then added the command 'boot config bootdisk:startup-config-BGFL_6509_MBAS-020712' in an attempt to boot from that config and have the Sup2T migrate it to the new config standards (particularly from a QoS perspective as mentioned here :[URL]
!
boot-start-marker
boot system flash bootflash:s2t54-advipservicesk9-mz.SPA.150-1.SY1.bin
boot config bootdisk:startup-config-BGFL_6509_MBAS-020712
...
Router#sh bootvar
BOOT variable = bootflash:s2t54-advipservicesk9-mz.SPA.150-1.SY1.bin,1;
[code]....
Cisco WAN :: WS-SUP720-3BXL And WS-X6748-GE-TX Configuration
Feb 20, 2013I have the above config in a 6509-E chassis with X2 Cac-3000 psu's
The problem i'm having is when everything is powered up it runs fine for about 10minutes then reloads the switch,The 6748 has a 6700-CFC installed the only way i have managed to get it run without crashes is to remove the 3BXL card from the sup and replace it with a PFC-3B, whilst this has solved the problem the client wants the 3BXL card to be installed, am I right in thinking that the CFC installed on the 6748 is incompatible with the 3BXL or maybe the 3BXL is faulty
Cisco Switching/Routing :: Need To Know Serial Number Of Sup720
Dec 10, 2011How can i find the serial number of sup-720 which is totally dead and not boot?By which sticker on SUP and where ? How many digits ?
View 4 Replies View RelatedCisco Switching/Routing :: Sup720-3BXL Stuck On SP
Mar 19, 2013I have a SUP720-3BXL that will not boot. It will get stuck at booting from the SP. It never switches over to the RP. [code]
View 5 Replies View RelatedCisco Switching/Routing :: SUP720-3B Internal Flash
Dec 1, 2011I have received a sup720-3B from Cisco with an internal 512MB flash(sup-bootdisk). I want to verify what IOS image is on the disk and do not have an spare 6509 chasis. Can I remove the 512 MB flash disk and insert it to my disk0: on my production 6509 with the sup32 that the 720 will repplace and view what is on the disk without corrupting?
View 7 Replies View RelatedCisco WAN :: BGP Flapping After Upgrading 7600-SUP720 To 12.2(33)-SRD8?
Jan 23, 2013We have a Cisco 7600 Router with SUP720/MFSC3 that was running version 12.3(33)-SRC3 for more than 2 years now. We recently had to upgrade to a newer release to solve a bug issue after recommendations, so we chose to go to SRD8 release. Since then we are facing a rather strange problem with one of my peer ebpg. we have 2-3 peering on the same router. only one of them is affected. The ebp keeps flapping every 3 minutes due to hold down timers.
12:14:33: %BGP-5-ADJCHANGE: neighbor 15.14.11.18 Down BGP Notification sent
12:14:33: %BGP-3-NOTIFICATION: sent to neighbor 15.14.11.18 4/0 (hold time expired) 0 bytes
12:14:33: %BGP_SESSION-5-ADJCHANGE: neighbor 15.14.11.18 IPv4 Unicast topology base removed from session BGP Notification sent
12:14:47: %BGP-5-ADJCHANGE: neighbor 15.14.11.18 Up
[code]....
We asked our peer if they have similar problems but it seems they do not. Our peer is using Cisco 12810 running 12.0(32)SY11 After downgrading back to version 12.2(33)SRC3 again, the probem was fixed...
Cisco WAN :: How Many BGP Routes WS-SUP720-BASE Engine Can Handle
Jan 6, 2011to the above question. I see the specs for the WS-SUP720-3B and 3BXL but not the WS-SUP720-BASE with the MSFC3 and PFC3A daughter cards.The 3B can handle 256,000 routes using IPv4 and the 3BXL can do 1,000,000.
View 4 Replies View RelatedCisco Switching/Routing :: MLS Statistics On Cat 6500 With Sup720
Sep 11, 2012when using "show mls statistics" I see a lot packets are getting L3 Processed. Does that mean they are getting software-forwarded?
IOS is 12.2(33)SXI5.
Cat6k#show mls statistics
Statistics for Earl in Module 5
L2 Forwarding Engine
[Code]....
Cisco WAN :: Sup720-10G 6509 - Multicasting In Same Vlan Broken
Oct 9, 2011Currently we do not have multicat routing enabled on either of our 2x Sup720-10G 6509 Switches. We have no intention of doing so either. I am looking for clarification on how mutlicasting operates within a Vlan.
IOS: s72033-ipservicesk9_wan-mz.122-33.SXH2a.bin
Our Vlan has IGMP snooping enabled. Here is the output.
6509Switch#sh ip igmp inter vlan 25
Vlan25 is up, line protocol is up
Internet address is 10.1.1.254/24
IGMP is disabled on interface
we do not want to disable IGMP due to this one concern that I can't find documented. If we disable IGMP snooping on the vlan, what happens to multicast packets with a TTL > 1. Do they get flooded to the entire switch and all Vlans? Or does it stay within the Vlan?
Cisco Switching/Routing :: Downgrading IOS On Sup720 VS-S720-10G?
Oct 26, 2011I got a new VS-S720-10G it had 122-33.SXH8b on there. I had to downgrade it to 12.2.33.SXI1 to match our other switches. I installed the file I use in all the other switches, s72033-adventerprisek9_wan-mz.122-33.SXI1.bin but the Sup is now is only booting up only to ROMMON mode.
Initializing ATA monitor library...
Self extracting the image... [OK]
Self decompressing the image : #################################################
################################################################################
################################################################ [OK]
%SYSTEM-1-INITFAIL: Network boot is not supported.
System Bootstrap, Version 8.5(4)
Copyright (c) 1994-2009 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory
[code]....
How do I get the older version of IOS to load up?