I have a RV042 Dual WAN router. What I would like to be able to do is to direct a computer on my network to access one particular WAN. For example, WAN1 is a DSL line and WAN2 is a cable line. I would like to direct a computer on our LAN to access the cable line always, even though I have Smart Link Backup set to WAN1. Is this possible?
View 6 RepliesI have this that comes up when i go on the networking
View 2 Replies View RelatedI have an RV042. I understand and have created the services I need. The documentation is just not clear on how to direct traffic for these services to a specific wan port.
Can this even be done with this router? If so, the how? Use rate control or priority? Does checking a wan port mean that it will only go through that port?
I have a RV042 (firmware 1.3.13.02-tm). Is it possible to configure so traffic from a specific domain (incl. its sub-domains) is directed exclusively to one WAN port?
View 10 Replies View RelatedI've just got my DCS-2121 up and working. But i can't figureout how to access the direct URL for the camera?And is there a URL for still images aswell?I got an iPad and an iPhone, but i can't access the camera because it use Java.I had another DCS-900 where i could access IMAGE.jpg and Video.cgi. Is there anything like those for the DCS-2121?
View 7 Replies View RelatedWe have ASA 5550, I have a portal server in the dmz which is natted statically to a public ip address for port 443. The application works fine from outside world. The server is also nated with a dynamic nat from inside to dmz and when I hit on the dmz ip from my inside it works fine.
The requirement for us is that the users sitting behind the inside (i.e. LAN) should access the server on the public ip address and not thru the dmz.
I have a Cisco RV042 Wired Router. I've got a static IP and a MS Small Business Server in my Router Network. I have forwarded the essential ports to use the IIS and the Exchange Server of my SBS2011 (HTTPS, HTTP, smtp, rpc). I have also created some access rules for these ports, but I don't have any access on my server services, if the firewall is activated.
Here are my Firewall Access Rules from the RV042 Web Interface:
I have a new router (ASUS RT-N10)and It is asking me to direct connect my cable modem to my computer, and then find my MAC address via command prompt, and clone it to the new router.I can get to my command prompt, the problem lies in windows 7 and vista's (or mine) inability to realize that my network card is directly connecting to the modem. (No internet connection available, doesn't think anything is connected). I have tried on multiple machines to try and find my modem's mac address but it simply is not working.I want to know if I can find the mac address through the old router, or what I need to do to have windows 7 recognize I'm directly connecting the modem to the PC.
View 3 Replies View RelatedI have CentOS and the application I am running does not listen on 192.168.1.5 (Private IP address). Right now I have connected using bridge mode and I can see in my network configuration-> ppp and eth0. PPP has public IP and eth0 has private IP. Is there any way that I can get public ip assigned to eth0? I do not have Static IP, I want to use the public dynamic IP assigned by my ISP to use in eth0 interface.
View 2 Replies View RelatedWe have 3 VLAN in our cisco 3750G switch. VLAN 1 10.1.0.0/24 for domain network, VLAN 2 10.2.0.0/24 for student and VLAN 3 10.3.0.0/24 for public. We have one printer 10.3.0.206 in the VLAN 3 and want to allow student server 10.2.0.253 in the VLAN 2 to access the printer. How can we configure access-list? Here is current configuration.
ip access-list extended publicaccess
permit icmp any any
permit ip any host 10.2.0.253
permit tcp any any established log
deny ip 10.3.0.0 0.0.0.255 10.1.0.0 0.0.0.255
deny ip 10.3.0.0 0.0.0.255 10.2.0.0 0.0.0.255
I'm trying to set up Windows Server UAG for Direct Access in a Testlab. The UAG Server has two network nics. One in my Testdomain (internal) and the other one in a DMZ of our Cisco ASA (external).Our ASA dmz has subnet 192.168.3.x but UAG Direct Access needs public ip adresses.Is there documentation how to configure an ASA 5520 Firewall so i can use my Windows UAG Server with Direct Access?
View 7 Replies View RelatedWe have an RV042 as main router.We have a netgear WNR2000v2 as WIFI router.We would like to offer our drop-in customers an internet access. But without letting them into our network.
View 1 Replies View RelatedWith an ASA 5505, i would l like to guide a sub network to an ISP and another sub network to the other ISP.i have 2 differents ISP.My major problem is the metric. I tried with access-list command to force the way out, but it seems that "metric" is stronger than "access-list".I don't know how to manage such LAB. is that possible with ASA 5505 appliance?
View 9 Replies View RelatedI have an RV042 using Quick VPN to connect to a remote network. I have port 1723 forwarded to a static IP address on a Windows 7 Pro 64 bit PC. I can establish the VPN and ping a printer but not the Win 7 PC. I can not acccess any shares on the pc via the IP address. It has Norton Antivirus and Windows Firewall. This remote PC replaced a Windows xp PC that allowed access to the shares. I have tried access with a Windows XP Pro and Windows Vista Home Premium PC. Neither have worked.
View 1 Replies View RelatedI have the rv042 vpn router which is the main gateway for our internet, connected to the vpn is one server for a software and then another computer is connected for a web server software, well i need to get these setup like so
Setup firewall rules that will block all inbound Internet access to the web server except port 443Setup firewall rules that will block all communication between the two internal networks, except ports 7000 and 1702These must be on two different internal networks
I have 2 networks.
NETWORK 1:EOC connection fro ISP going into a router (not the RV042) with a static WAN address from ISP. This router is hooked up to a switch that all the computers are connected to. All the computers on this network are using 192.168.1.x addresses. Most of these addresses are static, but the router is running DHCP in case we hook up temporary computers like laptops or client machines to this network.
NETWORK 2:DSL connection going into a router (not the RV042) with a static block of IPs from ISP. (8 IPs, 5 usable for the WAN interface, 1 static IP is being used for WAN interface). This router has a VPN connection set up for remote access to the linux machines on this network. This router is running DHCP on the LAN interface for this network with addresses 172.16.1.x. All the computers on this network are tied together with another switch, completely seperate from the 192.168.1.x network switch.
PROBLEM:We needed computers on the 192 network to be able to access computers on the 172 network. Someone decided to just run a cat 5 cable from the 192 switch to the 172 switch (not the routers, the switches). This "worked" - badly. Appearently there is a DHCP conflict (or something else going on) that was causing the router on the 172 network to try and assign addresses to the 192 network computers, and it was also "resetting" a connection about once an hour. This crashed our server on the 192 network. I disconnected that cat 5 cable between the two siwtches, and now each of the two networks are working properly, but they are now completely isolated from one another.
I need to create a bridge between the 2 networks so that machines on the 192 network can access machines on the 172 network while filtering out DHCP broadcasts from either network router to the other network. (I may need to filter out other protocols as well, but don't know yet.)So, I see 3 potential ways of doing this but don't know if they will work:
1) Can I just set up multiple subnets on the LAN interface of the RV042 and just run 2 cat5 cables from each switch on the two networks to the LAN ports of the RV042?
1a) If I do set up multiple subnets on the LAN interface of the RV042, do I need to assign the two ports to different VLANs? (I don't see any way to set each port to a specific IP address.)
2) Can I set up the 2 WAN ports on the RV042, one static for each network, and will the RV042 route traffic from 1 WAN port to the second WAN port?
3) Is there some other way I should consider setting this up?
Finally, someone mentioned that once I get the RV042 set up correctly as a bridge, I will need to route 172 addresses on the 192 network to the 192 interface of the RV042 via the DHCP router on the 192 network, and conversely, I will need to route 192 addresses on the 172 network from the DHCP router to the 172 IP interface of the RV042. I think this will be easy enough to set up in each of the DHCP routers...
Currently i am having a scenario where i have setup RV042 and which is connected to Microsoft Forefront 2010. PPTP works fine only on rv042 subnet but i am not able to access the "internal" network of TMG.RV042 (172.16.1.1) ---> TMG [external] (172.16.1.2) ---> TMG [internal] (192.168.1.1) Is there any way through static route to access the TMG internal network through RV042 pptp server?
View 1 Replies View Relatedupgrade IOS in cisco 4948 switch, I do not have admin right and network access
View 22 Replies View RelatedI've been trying to get my wireless configured for the past few days with no luck. I can ping every device on my local network and I can ping outside my network and surf the web. My wireless devices can see my wireless network but cannot connect to it.
[code]....
i am currently using 2 DSL WIFI modem and wants to combine them to my RV042 dual wan router but as i set them up using WAN1 and Wan2 as "Obtain IP Automatically" there is no internet connection?
View 2 Replies View RelatedCurrently have two laptops: one is a MacBook using OS X, the other a Gateway PC running Vista Home Edition. A Dell Inspiron 17R notebook running Windows 7 Home Premium is in process of delivery. Current laptops linked on a home Wi-Fi network with AirPort Express router. Anticipated use of new Dell notebook requires its direct connection to Internet outside of current network configuration. Is it possible to have both accesses available in my setup utilizing my one cable high speed service connection? If so, what are the steps needed to accomplish the required setup?
View 1 Replies View RelatedI have been trying to get this setup for 2 days now and so far NADA.....
Router: Linksys E3000 - below is a list of all devices connected (hardwired T568B) to the 4 ports with a laptop connected via wireless
1. Main PC - motherboard: ASUS Maximus IV Extreme-Z (dual GB LAN ports)
2. Media Server - motherboard: MSI Z68A-GD80 (dual GB LAN ports)
3. Test Bench AMD PC
4. WD TV Live
Currently: I have all 3 computers running Windows 7 and connected to a Homegroup. I have given the correct permissions to enable sharing of files between each of the 3 computers and can transfer files from one PC to the next w/o any issues.
Desired: I want to connect my Main PC and Media Sever with a crossover cable using the 2nd LAN port on each motherboard, so that I don't have to go through the router to transfer data to and from these 2 PCs. I will have each PC also connected to the Linksys E3000 router via the 1st LAN port on each motherboard to supply the internet connection, so I am also not trying to "share" an internet connection between these 2 PCs. Basically, I want to run my home network through the Linksys E3000 and then a 2nd network for the 2 PCs using the crossover cable.
Current Problem: I disconnected the straight-through cables from the router to each computer from the 1st LAN port. I then connected the crossover cable from the Main PC to the Media Server and setup a new Home network in the Network and Sharing Center in Windows 7. Everything worked and I could transfer data to and from each these 2 PCs, so i know I wired the crossover cable correctly. Then I reconnected the straight-through cables coming from the router to the 1st LAN ports of each mobo, thinking that each PC would auto-detect the internet connection and reacquire my existing home network, enabling an internet connection again. However, this did not happen.
[URL] I also followed this how-to guide on microsoft.com, but when I get to Step 3 where it says that an "Unidentified network icon" will aprear in the Network and Sharing Center, it does not!
From Googling, reading, and troubleshooting I believe I know 2 things:
1. All of the hardware is functioning properly - when the straight-through cables from the router are disconnected, the 2 PCs are networked through the crossover cable and files can be transferred.
2. The problem is with Windows 7 somewhere - I think?
I just bought a DCS-2130 for outdoor use (city landscape through my window in the nineteenth floor), and I'm trying to get it work during the daylight, but I'm having some problems.It seems like this camera can't handle direct sunlight, and in these situations the image gets blurry, even when I set the exposure to auto with max of 0dB in setup menu. Simply there's nothing I can do in this options menu to solve this problem.As the day passes by (and the sunlight gets weaker), the image gets better 'til the night, when it's perfect.What I need to know is if there is any way to setup it properly for daylight use. Is there possible to setup these exposure parameteres some other way, like editing an .ini file or something like that? Or this expensive camera simply can't handle this?
View 7 Replies View RelatedHow do I access shared folders over network XP pro v2002 sp3.I set up a network and have a workgroup called Workgroup. when I go to "entire network"->microsoft windows network->Workgroup and attempt to enter a certain computer I receive the message:"\comp_3 is not accessible. Yu might not have permission to use this network resource. Contact the administrator of this server to find out if you have access to permissions.Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again."What should I do? I have already enable netbios in the tcpip for the LAN for both computers. I have put on a password for the user of the computer that holds the file and subsequently get prompted on the remote computer, but even after entering the username and password of the host computer I still get this message. What do I need to do to access filesfolders on another computer?
View 2 Replies View Relatedhave a VPN set up through windows 7 at home. Until recently, I've always been able to connect to my VPN with my work laptop and access the files on my home computer. Now for some reason, my home computer no longer shows up under "network". I can connect to my VPN without issue, but the home computers just do not show up and I cannot access the files
View 1 Replies View RelatedUsing RV042 router,have an office with 4 computers XP PRO SP3 and only 2 need to use the VPN connection.problem is each one will connect just fine BUT when one is connected the other will not connect untill the other is disconnected.have another office with very similar setup (same quickvpn client) (same router)and i have 2 computers connecting at same time just fine.have checked all i can think of.
View 2 Replies View Related#2) Laptop - Windows 7 Pro 32 bitI have advanced sharing settings exactly the same.Set to share files and folders on private network. Both computers on the same Workgroup. Set to use username and password rather than homegroup. On the desktop, I set my second hard drive to share a video folder. If I try to access it using \COMPUTER1NAMEVideo (the share path), I get a denied message.If I access the laptop from the desktop and transfer the file that way, it works just fine. The laptop is wireless. The desktop is hooked up to the router.
View 6 Replies View RelatedSince a while back my internet access dies intermittently. I have a bunch of computers (mine, the kids, media stations etc.) in my network and one of them is configured to run two different instances of Windows: One for serious stuff (like work) and another for leisure. They're both Windows 7 Ultimate x64 instances and I use BootIt NG for this dual boot setup. Now, when I run the "work" instance I have no problems whatsoever but when I fire up the "game" instance internet dies off at irregular intervals, usually once or twice per hour.I've tried the usual stuff like resetting the IP stack (with ipconfig) and reinstalling the network card driver but the only thing that facilitatess is restarting the VDSL modem/router. I have also replaced the VDSL modem. What's really queer is that all other computers also looses internet access when this happens. And, if this wasn't strange enough, I never loose my WIFI, just the cabled network.
View 6 Replies View RelatedI cannot connect my Dell Inspiron 1300 through the NetworkManager "wired" connection, when I try to go direct to the cable modem. It fails to connect. If I connect the cable modem to my (linksys WRT54GS) wireless router, and then connect my laptop to a wired port in the router, it connects in seconds, successfully, This has happened to me 2 other times, when I tried to connect my laptop to a client's cable modem, because my client did not have a wireless router available, in their home. My wireless works fine. This has me perplexed. I'm using Ubuntu 10.04 LTS and NetworkManager Applet 0.8, I've tried some things to see what is going on, such as "ifconfig" "dhclient" as well as modifying the "Auto eth0" parameters and adding my laptop's MAC address, etc.
View 5 Replies View Relatedi have an internet connection thru USB from a ppp adapter from there i've made a netowrk with another computer now on the client computer from my network i have XAMP server who i want to be accessed from the internet .i have subdomain like radionis.zapto.org (192.168.0.2) registered at no-ip.org.now what IP i have to introduce there to make my server accessible.
View 1 Replies View RelatedHow can I block my son's computer from internet access through our wireless router without having his computer in hand? I have accessed the router on line but don't know what to change there.
[code]...
I suspect that he did something and gained remote access to my computer.I found out about it when I checked my wireless connections on my router and found his name on the network : Steve's - Iphone and a couple of unfamiliar connections. I then opened my task manager and ended some tasks I thought were possibly infected. When I went back to the wireless status, the unfamiliar connections disappeared.
I use Norton firewall + kaspersky internet security and my virus definitions have always been up to date, but I cannot detect anything. I also set my options to permit only MAC authenticated computers and changed my wireless WPA/WPA2 key, but every time I turn my wireless on, this guy somehow is connected to my network. [code]
recommend a cisco core switch and access switches in IPTV network infrastructure?I was ask to implement a network for IPTV system but i don't have idea what will be the model i will use.
Core Switch = Cisco 4503
Access Switches = Cisco 3560X