Cisco Switching/Routing :: Use WS-C3750X-12S-S And WS-C3750X-24T-S In A Stack?
Jan 8, 2012Can we use WS-C3750X-12S-S and WS-C3750X-24T-S in a single stack?
View 7 Replies
ADVERTISEMENT
Cisco Switching/Routing :: Can Stack Ws-c3750x-48p-l And Ws-c3750x-48pf-s
May 16, 2013Recently one of our stack switch got failed, Rma raised but we received some different part number.The dobut is like can we stack the below switches.
ws-c3750x-48p-l v02 (old switch)
ws-c3750x-48pf-s v04 (RMA switch)
Cisco Switching/Routing :: Stacking WS-C3750X-12S-E And WS-C3750X-48P-E
Nov 7, 2012Can i put in stack the ws-c3750X-12S-E and ws-c3750X-48P-E? considering the follow features:
WS-C3750X-48P-E (Catalyst 3750X 48 Port PoE IP Services)
S375XVK9T-12253S
CAT 3750X IOS UNIVERSAL WITH WEB BASE DEV MGR
WS-C3750X-12S-E (Catalyst 3750X 12 Port GE SFP IP Services)
C3KX-NM-10G
S375XVK9T-12255SE
CAT 3750X IOS UNIVERSAL WITH WEB BASE DEV MGR
Cisco Switching/Routing :: C3750x-48P-E Stack Switch Best IOS
Mar 27, 2013Which is the best and advanced IOS for c3750x-48P-E stack switch among below listed IOS.
c3750e-universalk9-mz.122-58.SE2 ?
or
c3750e-universalk9-mz.122-55.SE6..??
Cisco Switching/Routing :: Stack Compatibility With WS-C3750X-12S?
Dec 18, 2011Can a WS-C3750X-12S coexist in an existing stack made up of a WS-C3750G-12S and a WS-C3750G-24TS?
View 7 Replies View RelatedCisco Switching/Routing :: Can Stack (ws-c3750G-12s) With (ws-c3750X-24p-poe-s) With (ws-c3750-48p-10/100 Poe)
Feb 3, 2012can i stack cisco (ws-c3750G-12s) with (ws-c3750X-24p-poe-s) with (ws-c3750-48p-10/100 poe) i mean even a switch is 10/100 and the other switch is 10/100/1000?
View 3 Replies View RelatedCisco Switching/Routing :: C3750X - Power Stack Configuration
Oct 26, 2011Any issues are reported while configuring power stack ? We did several times with 12.2.58SE1 and SE2, sometimes the power stack is created automatically, sometimes needs to be configured manually. Looks like the behavior is not the same. Maybe it depends on the number/type of switches and number/type of power supplies.
View 1 Replies View RelatedCisco Switching/Routing :: C3750X Stack Power Cables End Colors
Oct 26, 2011Does the color strips on C3750X stack power cables mean anything, I mean the green and yellow ones. On all Cisco pictures the green one seems to be plugged in the upper ports. I asked local Cisco representative, but he seems not to be sure. We tried to try different scenarios, and it looks like it does not matter what cable end we use. We do not have any external power supply, only interconnecting C3750Xs.
View 1 Replies View RelatedCisco Switching/Routing :: Adding New Switch To Existing C3750x Stack?
Dec 6, 2012I am having an issue with adding a c3750x switch to an existing switch stack Currently there is 2 x WS-C3750X-48P and I am trying to add another WS-C3750X-48P to this switch I have cabled the switch to the stack using the stack cables and added the command to provision the switch on the exisitng stack. However when I turn the switch on it just goes on its own stack.
I noticed the new switch had a later version of IOS so have downgraded this to the same version as the other switches but still no joy Here is the sh ver from the exisitng stack
uptime is 4 weeks, 4 days, 23 hours, 30 minutes
System image file is "flash:/c3750e-universalk9-mz.122-53.SE2/c3750e-universalk9-mz.122-53.SE2.bin"
License Level: ipbaseLicense Type: PermanentNext reload license Level: ipbase
cisco WS-C3750X-48P (PowerPC405) processor (revision A0) with 262144K bytes of memory.Processor board ID FDO1448Z0FJLast reset from power-on21 Virtual Ethernet interfaces1 FastEthernet interface156 Gigabit Ethernet interfaces6 Ten Gigabit Ethernet interfacesThe password-recovery mechanism is enabled.
[code]....
Cisco Switching/Routing :: Stack WS-C3750-24FS With WS-C3750X To Use C3KX-SM-10G
Aug 9, 2012We have WS-C3750-24FS switches stacked supporting users on our LAN. I want take advantage of the netflow capabilities of the WS-C3750X using the C3KX-SM-10G card.
Would I be to see netflow data coming from the WS-C3750's if I stacked it with the WS-C3750X?
Also I read that the C3KX-SM-10G card would support a 1G SFP is that correct?
Cisco Switching/Routing :: WS-C3750X-48T-S / IP BASE Licensed Connected As Stack
Mar 15, 2013I have two WS-C3750X-48T-S which is "IP BASE" licensed, which are connected as stack.I need to use Policy Based Routing (PBR) to direct Vlans to two different gateways, and command "ip policy route-map" which is supported only in C3750-IPSERVICES license.Do I need upgrade only master switch with Cisco IOS IP Services - product upgrade licenseMfg. Part#: L-C3750X-48-S-E, or both switches need to be upgraded?
View 20 Replies View RelatedCisco Switching/Routing :: C3750X Stack / Difference Between LanBase And IPBase For ISCSI?
Dec 26, 2011Cisco let us try a CISCO C3750X- 24T-S Stack (2 switches) ->> IpBase Sofware licence We've 2 Hyper-v 2008 R2 and one SAN Netapp FAS2040 connected via Iscsi.All was working well with this stacks.Hyper-V see Nas Iscsi interface without problem. Even with basic stack config (no Vlan, ect...).Then, after this test period, we bought a C3750X-24T-L stack (2 switches) to replace the stack lent by Cisco.This one is LanBase Software.
With this stack, hyper-v work very bad ! We've got a lot of Iscsi error in the eventvwr.I can't access luns.So, is there a difference between LanBase and IpBase for a iscsi use ?I put the 24T-S config on the 24T-L switch without pb. So config is the same on both stacks...Also i've got a "TestPortAsicLoopback" = "Failed" on the new stack...I've tried with other stack cables. Not better.
Cisco Switching/Routing :: Stack C3750G And C3750X - Major Version Mismatch
Jun 11, 2013I'm trying to stack 3750G & 3750X. As discussed in previous threads I am aware of that the version need to match.
Here the switch details:
Switch Ports Model SW Version SW Image
------ ----- -------------- ----------
* 1 24 WS-C3750G-24T 12.2(55)SE7 C3750-IPBASEK9-M
---------------------------------------------------------------------------------------------------------------
* 1 54 WS-C3750X-48 12.2(55)SE7 C3750E-IPBASEK9-M
I have changed the universal IOS on the 3750X to IP base..but they still wont come up as a stack. On the 3750X I don't see any log entry, on 3750G (major version mismatch).
Cisco Switching/Routing :: WS-C3750X-12S-S Options To Achieve Putting All 4 Switches Into Single Stack
Feb 12, 2012I have a couple of WS-C3750X-48T-L and a couple of WS-C3750X-12S-S, I want to stack all four of them together into a single stack. WS- C3750X-12S-S are running c3750e-universalk9-mz.122-58.SE2 whereas WS-C3750X-48T-L are running c3750e-universalk9-mz.122-55.SE3.I have got a couple of queries as under:What are the options to achieve putting all these 4 switches into a single stack? Can the LAN Base switches upgraded to IP Base?
View 3 Replies View RelatedCisco WAN :: Possible To Have WS-C3750G-12S-S And WS-C3750X-24T-L In Same Stack
Aug 7, 2011Is it possible to have a WS-C3750G-12S-S and a WS-C3750X-24T-L in the same stack, if so do they need to both be running the same software version/IOS.
View 6 Replies View RelatedCisco Infrastructure :: WS-C3750X-24T-S - One Of Four Switches Of Stack Crashed
Jan 10, 2012Symptoms: The switch hangs - after a hard reboot and after two hours switch No. 2 flew out from the stack. After the reboot, everything returned to normal and now when a few days passed switch works without problems. Devices: WS-C3750X-24T-S
View 3 Replies View RelatedCisco WAN :: Mixed Stack C3750G And C3750X IOS Update Required
Sep 6, 2011I have running a Stack with two C3750G-24TS-S1U with the IOS c3750-ipbasek9-mz.122-50.SE3.Now I want put a new C3750X-24T-S in the existing stack. I have read this is possible. I have running a other mixed stack with a C3750G-12S and an C3750E-48TD. Its running fine until I want to make an IOS update. The update was done with the CW LMS 3.1. After the automatic update and restart only the C3750E had an new IOS the C3750G doesn't have any IOS. Do I have the same problem with the mixed Stack C3750G and C3750X?Do I have to upgrade the IOS by copying the different IOS Versions ( c3750-ipbasek9-mz.122-50.SE3 / c3750e-ipbasek9-mz.122-50.SE3) to every switch ?
View 5 Replies View RelatedCisco :: LMS 4.0 Doesn't Show The View Image For LAN WS-C3750X-48T-L In Stack Mode?
Aug 19, 2011I downloaded all updates packages of the device for the Cisco View and I could not the show the image
View 1 Replies View RelatedCisco Switching/Routing :: High CPU In WS-C3750X-48
Nov 7, 2011Currently, my Cisco 3750x (2 switches stacking) is having very hight CPU. Below are some of the output :
3750-ANA#sh processes cpu sorted | ex 0.00
CPU utilization for five seconds: 55%/30%; one minute: 55%; five minutes: 55%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
[Code]....
I am not sure what is using CPU to go up like this. I had tried some troubleshooting guide on Cisco web site like "Troubleshooting high CPU Utilization"
Cisco Switching/Routing :: Does WS-C3750X-24S-S Support GLBP
Dec 28, 2011I would like to ask you that switch WS-C3750x-24S-S can support with GLBP?i have IOS version : S375xvk9t-12258SE.
View 2 Replies View RelatedCisco Switching/Routing :: WS-C3750X-48T-S - No Shutdown / Not Working
Jan 5, 2013I'm experiencing strange issue with my WS-C3750X-48T-S.
Model number: WS-C3750X-48T-S
System image file is "flash:/c3750e-universalk9-mz.122-55.SE3/c3750e-universalk9-mz.122-55.SE3.bin"
This switch is situated on a remote site and on the 6th of January it was rebooted.
I still do not know the cause, but it might be power outage or smth. We are still checking. After the reboot I've noticed that one port on this cisco switch is in 'notconnect' state, while I'm pretty sure it should be 'connected'.
I've tried to shutdown the port adminstratevly and do the 'no shutdown' but this port remained in 'disable' state.
#sh run interface Gi1/0/5
Building configuration...
!
interface GigabitEthernet1/0/5
[Code].....
Cisco Switching/Routing :: C3750X-24S-E As Core In A L2 Network
Nov 24, 2011I want to deploy the C3750X 24-port SFP switch as the core switch in a large Layer 2 switching domain.The switch will need to run:
+/- only 10 large VLANs, 6 VLANs with HSRP
+/- 500 MACs total
+/- 5 OSPF sessions default timers
standard PVST+ (no Rapid PVST+)i need around 27 SFP ports (24 + 4 on network module=28=ok, extra capacity by stacking)
Looking at the switching capacity of the specs (160 Gbps) this is much better than a C6500 with SUP32-GE !Will it be able to handle this or should i look for C6500+SUP32GE or C6500-SUP720 or maybe even C4500 ?
Cisco Switching/Routing :: WS-C3750X-48PF-S CPU Utilization
Feb 12, 2012First of all I purchased the switches with part no. WS-C3750X-48P with the following IOS c3750e-universalk9-mz.150-1.SE1 & IOS feature license to work as ipservice.
Symptoms:
1) - When running the switches in stack mode (connecting the booth switch with full-duplex stack) I found the cpu utilization on each switch reached to 34% The Hulc LED Process reaches to 20%
3) - After about 1 hour with no connections to the switch I found the status not changed.
4) - I tried to run each switch in stand-alone mode (without stack cables connected) & monitor the status of the cpu utilization. I found it the same problem exist. Actions taken:
1) - Refereeing to the internet I found a bug ID describing the status of the mentioned symptoms (attached)
2) - I made a down grade for the IOS version to be c3750e-universalk9-mz.122-58.SE2.bin
3) - The mentioned IOS solved the Hulc LED Process (became 1 : 3 % ) & however cpu utilization became 18% with no links or traffic connected to the switches.
4) - I guess that 18 % utilization is too much for a free switch (refer to the show run file) as I did not configure any advanced commands.
Cisco Switching/Routing :: 3750 - ME3600X Vs WS-C3750X-24S-S
Apr 16, 2012I'm looking for a 24-port SFP switch. Each of the two switches in the subject meets that requirement. If I went with the ME switch over the 3750 (at about half the cost), what features/functionality if any, would I be giving up?
View 5 Replies View RelatedCisco Switching/Routing :: C3750X Web Interface Missing
Jun 3, 2012I just loaded the web interface IOS on a C3750X. The first thing I noticed was there was basically no web interface. I can look at things, and do default configurations on ports, but it doesn't appear I can configure VLANs or QoS or anything like that.
Am I missing something, or is this just how the web interface functions?
Cisco Switching/Routing :: C3KX-PWR-1100WAC / WS-C3750X-24P-S - Compatibility
Mar 5, 2012Is the C3KX-PWR-1100WAC= compatible with the WS-C3750X-24P-S?
View 1 Replies View RelatedCisco Switching/Routing :: Replacing WS-3750-48p With WS-C3750X-48PF-S?
Mar 10, 2013In my MDF I have a 4stack of the WS-3750-48P switches. Is it possible to replace one with a C3750X48PF-S with out causing any issues? Or would it be better to just have 3 stacked and trunk this one to the core 4506. Keeping in mind I bought this one to expand the port number for one of our remote offices.. I would hate to send them the gig switch when there isn't as much usage..Besides if I can get my CFO on this switch he might authorize me to replace the rest... He is reticent to believe it makes really all that much of a difference.
View 2 Replies View RelatedCisco Switching/Routing :: C3KX-PWR-440WDC On Catalyst WS-C3750X-24T-S
Oct 2, 2012I have a Catalyst WS-C3750X-24T-S with two power supply C3KX-PWR-440WDC, each of these power supply have two input to deliver 440 W, my question is: Can I use only one Input in each power supply to power up the switch?, I know that I dont going to get the total power of 440W, but the power delivers by the supply with one input circuit is enough to power up the switch condidering that the switch are not PoE and only have 24 ports?.
View 3 Replies View RelatedCisco Switching/Routing :: Stacking WS-C3750X-24P With WS-C3750G-24PS?
Dec 10, 2011I'm having trouble stacking a new WS-C3750X-24P with existing switches WS-C3750G-24PS ?I can see the license is on the new WS-C3750X-24P:
switch#sho lic
Index 1 Feature: ipservices
Period left: 8 weeks 4 days
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
License Priority: None
[code].....
I could put on the c3750e-ipbasek9-mz.122-55.SE1 image, but I may need to get the license sorted still, but not sure if that will work or how to add it if i got one.....
Cisco Switching/Routing :: C3750X-24S Two Switches Never Associate With Firewall
Jan 27, 2013We have a new backbone in our LAN with two C3750X-24S 15.0(1)SE3. Since we change the model of our equipment we can't update NTP on this two switches.We try to update NTP with two firewall Juniper SSG-140 in version 6.3.0r12.0. The two switchs never arive to associate with firewall (we try with the comme ntp server and ntp peer)
So we configure ntp server on our distribution servers switchs (one 4900 12.2(54)SG and one stack of 3750G and 3750E 12.2(50)SE5). They have no problem to update NTP on the firewal.So we change our configuration ntp server on the backbone and we try to update it with the distributions servers switchs. With the command ntp server it doesn't work. With the commande ntp peer it works but not everytime. The core switchs are in "synchronized" state then "unsynchronized" then "synchronized" etc...When they are in "unsynchronized" state there is "x falseticker" raison behind the IP of the ntp peer.
Is it an IOS version problem on our core switch?
Cisco Switching/Routing :: WS-C3750X-48PF-S Connection With HP DL380 Gen8
Dec 4, 2012I would like to connect a DL380Gen8 to a Cisco 3750X using 10G.
On HP side, i have a Ethernet 10Gb 2-port 530FLR-SFP+ Adapter (without any SFP) and a WS-C3750X-48PF-S + a C3KX-NM-10G= module (without SFP).
What kind of cable and/or SFP are suitable to connect everything together ?
Cisco Switching/Routing :: WS-C3750X-48 Dscp Removed On Router Port
May 26, 2013I have a problem with dscp preservation on a WS-C3750X-48 catalyst; in my little diagram, his name will be SW2, so I have this:SW1 <-> SW2 <-> RT1. some phone connected to SW1 mark with dscp EF (46) the voice traffic.The "mls qos" was enabled on SW1 and SWt. The interlink switch ports has the "mls qos trust dscp" option, the phone port and the router port also.And the problem is I can see the dscp marking on the SW2 when I span the voice vlan on this switch but the dscp was removed ( DSCP set to 0) on the router port ( span on the router port for look )If I made also a packet capture on the router RT1, I see the DSCP was effectively reset to zero.If I disable the "mls qos" on SW2, of course all is fine and the dscp was preserved and forwarded to the router. [code]
View 2 Replies View RelatedCisco Switching/Routing :: Old WS-C3750G-48TS Works With New Replacement (WS-C3750X-48T-E)
Aug 12, 2012Situation: Currently WS-C3750G-48TS-(S or E) switches are on stack. Now these units will soon EOL on Jan. 30, 2013 and Cisco recommends that
WS-C3750X-48T-S or WS-C3750X-48T-E will be used.
The question is: Will the new SKU works together in a stack with the old ones? Will there be no changes on the type of stacking cable to be used?