Cisco :: LMS 4.0 Doesn't Show The View Image For LAN WS-C3750X-48T-L In Stack Mode?
Aug 19, 2011I downloaded all updates packages of the device for the Cisco View and I could not the show the image
View 1 Replies
ADVERTISEMENT
Cisco Switching/Routing :: Can Stack Ws-c3750x-48p-l And Ws-c3750x-48pf-s
May 16, 2013Recently one of our stack switch got failed, Rma raised but we received some different part number.The dobut is like can we stack the below switches.
ws-c3750x-48p-l v02 (old switch)
ws-c3750x-48pf-s v04 (RMA switch)
Cisco Switching/Routing :: Use WS-C3750X-12S-S And WS-C3750X-24T-S In A Stack?
Jan 8, 2012Can we use WS-C3750X-12S-S and WS-C3750X-24T-S in a single stack?
View 7 Replies View RelatedCisco WAN :: 3750v2 Stack Ports Show Up As Down In Stack
Mar 24, 2011I have a cisco 3750v2-48TS connected to a cisco 3750v2-48PS in a stack. The stack ports show up as down/down in the stack.Is there a limitation as to if they can be connected.? I mean can we have a PoE and a non PoE in the stack?
View 1 Replies View RelatedCisco WAN :: Possible To Have WS-C3750G-12S-S And WS-C3750X-24T-L In Same Stack
Aug 7, 2011Is it possible to have a WS-C3750G-12S-S and a WS-C3750X-24T-L in the same stack, if so do they need to both be running the same software version/IOS.
View 6 Replies View RelatedCisco Switching/Routing :: C3750x-48P-E Stack Switch Best IOS
Mar 27, 2013Which is the best and advanced IOS for c3750x-48P-E stack switch among below listed IOS.
c3750e-universalk9-mz.122-58.SE2 ?
or
c3750e-universalk9-mz.122-55.SE6..??
Cisco Switching/Routing :: Stack Compatibility With WS-C3750X-12S?
Dec 18, 2011Can a WS-C3750X-12S coexist in an existing stack made up of a WS-C3750G-12S and a WS-C3750G-24TS?
View 7 Replies View RelatedCisco Infrastructure :: WS-C3750X-24T-S - One Of Four Switches Of Stack Crashed
Jan 10, 2012Symptoms: The switch hangs - after a hard reboot and after two hours switch No. 2 flew out from the stack. After the reboot, everything returned to normal and now when a few days passed switch works without problems. Devices: WS-C3750X-24T-S
View 3 Replies View RelatedCisco Switching/Routing :: 3750 - Show Interface Vlan (ID) Doesn't Show In / Out Traffic Rate
Mar 13, 2013I have configured a vlan interface on a 3750 switch. there is aprox 4Mb active traffic flowing through the interface, but when I do a "show interface vlan (vlanid)" the output show zero bits in and zero bits out. Its a typical L3 config with one IP on the vllan interface acting as the gateway for the VLAN devices. Is this a normal behaviur ? and if so is there any way to get the traffic in/out stats. The end PC/devices are connected to this switch via an L2 TRUNK and I dont have access to the L2 switch on which the actual devices connect. so cant get the real time stats of those interfaces.
View 2 Replies View RelatedCisco WAN :: Mixed Stack C3750G And C3750X IOS Update Required
Sep 6, 2011I have running a Stack with two C3750G-24TS-S1U with the IOS c3750-ipbasek9-mz.122-50.SE3.Now I want put a new C3750X-24T-S in the existing stack. I have read this is possible. I have running a other mixed stack with a C3750G-12S and an C3750E-48TD. Its running fine until I want to make an IOS update. The update was done with the CW LMS 3.1. After the automatic update and restart only the C3750E had an new IOS the C3750G doesn't have any IOS. Do I have the same problem with the mixed Stack C3750G and C3750X?Do I have to upgrade the IOS by copying the different IOS Versions ( c3750-ipbasek9-mz.122-50.SE3 / c3750e-ipbasek9-mz.122-50.SE3) to every switch ?
View 5 Replies View RelatedCisco Switching/Routing :: Can Stack (ws-c3750G-12s) With (ws-c3750X-24p-poe-s) With (ws-c3750-48p-10/100 Poe)
Feb 3, 2012can i stack cisco (ws-c3750G-12s) with (ws-c3750X-24p-poe-s) with (ws-c3750-48p-10/100 poe) i mean even a switch is 10/100 and the other switch is 10/100/1000?
View 3 Replies View RelatedCisco Switching/Routing :: C3750X - Power Stack Configuration
Oct 26, 2011Any issues are reported while configuring power stack ? We did several times with 12.2.58SE1 and SE2, sometimes the power stack is created automatically, sometimes needs to be configured manually. Looks like the behavior is not the same. Maybe it depends on the number/type of switches and number/type of power supplies.
View 1 Replies View RelatedCisco Switching/Routing :: C3750X Stack Power Cables End Colors
Oct 26, 2011Does the color strips on C3750X stack power cables mean anything, I mean the green and yellow ones. On all Cisco pictures the green one seems to be plugged in the upper ports. I asked local Cisco representative, but he seems not to be sure. We tried to try different scenarios, and it looks like it does not matter what cable end we use. We do not have any external power supply, only interconnecting C3750Xs.
View 1 Replies View RelatedCisco Switching/Routing :: Adding New Switch To Existing C3750x Stack?
Dec 6, 2012I am having an issue with adding a c3750x switch to an existing switch stack Currently there is 2 x WS-C3750X-48P and I am trying to add another WS-C3750X-48P to this switch I have cabled the switch to the stack using the stack cables and added the command to provision the switch on the exisitng stack. However when I turn the switch on it just goes on its own stack.
I noticed the new switch had a later version of IOS so have downgraded this to the same version as the other switches but still no joy Here is the sh ver from the exisitng stack
uptime is 4 weeks, 4 days, 23 hours, 30 minutes
System image file is "flash:/c3750e-universalk9-mz.122-53.SE2/c3750e-universalk9-mz.122-53.SE2.bin"
License Level: ipbaseLicense Type: PermanentNext reload license Level: ipbase
cisco WS-C3750X-48P (PowerPC405) processor (revision A0) with 262144K bytes of memory.Processor board ID FDO1448Z0FJLast reset from power-on21 Virtual Ethernet interfaces1 FastEthernet interface156 Gigabit Ethernet interfaces6 Ten Gigabit Ethernet interfacesThe password-recovery mechanism is enabled.
[code]....
Cisco Switching/Routing :: Stack WS-C3750-24FS With WS-C3750X To Use C3KX-SM-10G
Aug 9, 2012We have WS-C3750-24FS switches stacked supporting users on our LAN. I want take advantage of the netflow capabilities of the WS-C3750X using the C3KX-SM-10G card.
Would I be to see netflow data coming from the WS-C3750's if I stacked it with the WS-C3750X?
Also I read that the C3KX-SM-10G card would support a 1G SFP is that correct?
Cisco Switching/Routing :: WS-C3750X-48T-S / IP BASE Licensed Connected As Stack
Mar 15, 2013I have two WS-C3750X-48T-S which is "IP BASE" licensed, which are connected as stack.I need to use Policy Based Routing (PBR) to direct Vlans to two different gateways, and command "ip policy route-map" which is supported only in C3750-IPSERVICES license.Do I need upgrade only master switch with Cisco IOS IP Services - product upgrade licenseMfg. Part#: L-C3750X-48-S-E, or both switches need to be upgraded?
View 20 Replies View RelatedCisco Switching/Routing :: C3750X Stack / Difference Between LanBase And IPBase For ISCSI?
Dec 26, 2011Cisco let us try a CISCO C3750X- 24T-S Stack (2 switches) ->> IpBase Sofware licence We've 2 Hyper-v 2008 R2 and one SAN Netapp FAS2040 connected via Iscsi.All was working well with this stacks.Hyper-V see Nas Iscsi interface without problem. Even with basic stack config (no Vlan, ect...).Then, after this test period, we bought a C3750X-24T-L stack (2 switches) to replace the stack lent by Cisco.This one is LanBase Software.
With this stack, hyper-v work very bad ! We've got a lot of Iscsi error in the eventvwr.I can't access luns.So, is there a difference between LanBase and IpBase for a iscsi use ?I put the 24T-S config on the 24T-L switch without pb. So config is the same on both stacks...Also i've got a "TestPortAsicLoopback" = "Failed" on the new stack...I've tried with other stack cables. Not better.
Cisco Switching/Routing :: Stack C3750G And C3750X - Major Version Mismatch
Jun 11, 2013I'm trying to stack 3750G & 3750X. As discussed in previous threads I am aware of that the version need to match.
Here the switch details:
Switch Ports Model SW Version SW Image
------ ----- -------------- ----------
* 1 24 WS-C3750G-24T 12.2(55)SE7 C3750-IPBASEK9-M
---------------------------------------------------------------------------------------------------------------
* 1 54 WS-C3750X-48 12.2(55)SE7 C3750E-IPBASEK9-M
I have changed the universal IOS on the 3750X to IP base..but they still wont come up as a stack. On the 3750X I don't see any log entry, on 3750G (major version mismatch).
Cisco Switching/Routing :: WS-C3750X-12S-S Options To Achieve Putting All 4 Switches Into Single Stack
Feb 12, 2012I have a couple of WS-C3750X-48T-L and a couple of WS-C3750X-12S-S, I want to stack all four of them together into a single stack. WS- C3750X-12S-S are running c3750e-universalk9-mz.122-58.SE2 whereas WS-C3750X-48T-L are running c3750e-universalk9-mz.122-55.SE3.I have got a couple of queries as under:What are the options to achieve putting all these 4 switches into a single stack? Can the LAN Base switches upgraded to IP Base?
View 3 Replies View RelatedCisco :: Show Command To View Ram Modules
Nov 30, 2011Looking for a show command to display the actual physical Ram modules inside a 2911 router. I believe they come with 2x ram slots and I need to know if it has 1 ram stick or 2.show version displays the total amount of ram, but not if its 2x128 or 1x256 etc.This is also production gear so I cannot open it up and have a look until the scheduled downtime.
View 3 Replies View RelatedEmachines Laptop Does Not Show / View Wireless Networks
Jun 5, 2012why does my laptop not even show any view wireless networks.In the wireless connection status box, it only says properties, disable but where it should say view wireless networks there is nothing! It is blank. Why is this? And how do I get it to view my wireless networks? I have tried a wireless usb adapter which I use for my other laptop. That usb adapter is comptabile with both WEP and WPA and the computer does not pick up the software. I don't know what else to do.
View 5 Replies View RelatedD-Link DCS-930L :: D-View Program Does Not Show Camera
Feb 15, 2013If i run the software CD and activate the cam by "setup your cloud camera" it works and i can see the camera but i can only run it per local router command 192.168.... and there i only have the 320x240 solution. Important info: I only want to run the camera in my local network, i wont use the mydlink option,But if i install the D-ViewCam software the screen remains black and the program wont find my camera. I have already had a phone call with the d-link software
View 1 Replies View RelatedCisco :: View 3750 Stack Serial Number Inventory LMS 3.2?
Oct 17, 2011I am trying to come up with an inventory report of all our 3750v2 stack switches, but for some reason I could not get the serial number of the member switch under each stack. Can Ciscowork LMS 3.2 see the serial number for each switch under a stack?
View 2 Replies View RelatedCisco Switching/Routing :: Change Of Software Image In 3750 Stack
Nov 9, 2011End user have had problem with IP phones that are connected to 3750 stack; many times IP phones lose connection with CallManager and the only way to clear this issue is with clear arp command. DHCP for IP phones is configured in 3750 stack.
At the beginning 3750 stack was set a VTP server, and the others as VTP clients, we detected another VTP server switch so we thought that was the problem, but after removing the issue remains. Finally we set all switch in transparent mode.
Base on this we decided to change the software image 12.2(35)SE1 C3750-ADVIPSERVICESK ---> 122-53.SE2 IPSERVICES I'm going to follow the procedure 3750 Series Switch Stack IOS Upgrade − Automatic .
as it show in the following information there are 4 differents models of 3750 switches, I have already download c3750-ipservicesk9-tar.122-53.SE2.tar for 3750G-24TS.
I have two doubts:
1. There is no problem for using this tar file for all models?
2. I followig command is correct for the change I plann to do ?
Switch#archive download-sw /allow-feature-upgrade /overwrite tftp://192.168.0.24/c3750-ipservicesk9-tar.122-53.SE2.tar
#sh inventoryNAME: "1", DESCR: "WS-C3750G-24TS" 16MB Flash 128 DRAMPID: WS-C3750G-24TS-E
[Code].....
Cisco Switching/Routing :: Stacking WS-C3750X-12S-E And WS-C3750X-48P-E
Nov 7, 2012Can i put in stack the ws-c3750X-12S-E and ws-c3750X-48P-E? considering the follow features:
WS-C3750X-48P-E (Catalyst 3750X 48 Port PoE IP Services)
S375XVK9T-12253S
CAT 3750X IOS UNIVERSAL WITH WEB BASE DEV MGR
WS-C3750X-12S-E (Catalyst 3750X 12 Port GE SFP IP Services)
C3KX-NM-10G
S375XVK9T-12255SE
CAT 3750X IOS UNIVERSAL WITH WEB BASE DEV MGR
Cisco WAN :: 2811 - IOS Image Doesn't Loading
Aug 23, 2011I've a problem with a router 2811:
Upgrade ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xcb80
program load complete, entry point: 0x8000f000, size: 0xcb80
[Code]......
Cisco Switching/Routing :: Show Inventory Not Showing All Members In 3750-stack?
May 1, 2012I notice that show inventory not showing all members in a 3750-stack after we merged two stacks. Its only showing the master of the new stack, and the previous master of the old stack.
View 3 Replies View RelatedCisco :: After Upgrade WISM To 7.0.116.0 / Local Mode APs Will Not Download Image
May 25, 2011I upgraded my WISM software to v. 7.0.116.0. The upgrade went smoothly. Most of my WAPs are H-REAP and they are working fine. I have a few local mode WAPs that are stuck in a downloading state. They will try to download, reboot, then try to download again. This is happening only with the WAPs in local mode. These WAPs were working before the upgrade.
View 2 Replies View RelatedCisco Switching/Routing :: 3560 ISO Image Installation XY Mode
Apr 24, 2013I have L3 switch 3560 v2 cisco switch. If i connect the switch via the console cable in XP system i am not getting any responce. I think i need to install via XY mode.
how can i install the ISO iamge via XY mode in cisco switch 3560 v2.Cisco Model: WS-C3560v2-48tS-S.
Cisco Switching/Routing :: 3750X Switch Doesn't Load Image?
Oct 31, 2011I've 3750X switch that isn't loading email. then I went to rommon mode and accidently for "format flash". after that I loaded 15.0 SE2 s/w on it using tftp server but it doesn't boot up with that image. flash had only .bin file after I loaded it from tftp server.
since it wasn't booting up, I did format flash again and thought to load image again from tftp server but now, it doesn't load image from tftp server.
Cisco Switching/Routing :: X4516 Upload Image From Common Mode
Nov 15, 2011I was trying to upload image to sup x4516 V10G from Rommon using the management port but did not succeed. The steps which I did as mentioned below: [code]I got the tftp request on the tftp server but from the switch was showing access violation
View 0 Replies View RelatedCisco WAN :: 887 Doesn't Support Show DSL Command?
Jun 26, 2011The Cisco 887 doesn't support the show dsl command, what is the command that I need to use to display the speed my ADSL is operating at? On the Cisco 877 the command I use is show dsl int atm 0 but this doesn't work on the 887
View 4 Replies View RelatedCisco :: LMS 4.2.1 Fault Setup Doesn't Show Any Devices
Aug 8, 2012LMS discoverd all my devices and updated the DCR. This devices are visible in DFM. For some of this devices i would like to change the threshold values. For some reason the devices are not visible in Monitor->Fault Settings->Seup->Threshold Settings (please see screenshot) Is there another approach to change the threshold values?
View 5 Replies View Related