Cisco VPN :: Old Software With Brand New ASA5505
Jan 21, 2013
We just purchased a brand new ASA 5505 from EBuyer in the UK. This device only came with the AnyConnect 2.5 software, and actually old firmware too. However, I've discovered that I need a support contract to be able to update the software. We're now stuch with VPN software that doesn't work with Windows 8. This should have been up-to-date out of the box, yet we're being told that we have to pay extra for a support contract just to make it current. This is discusting! Am I missing something, or are other people experiencing the same? Is this a typical Cisco tactic to force people into purchasing support contracts?We paid over £700 for the firewal. I would expect it to have current software bundled with it.
View 2 Replies
ADVERTISEMENT
Jun 1, 2011
My brother's Speedstream has died. Lights don't work, etc. etc. He has ATT DSL in Detroit; Detroit does not have an internet wireless service, so he has to deal with ATT. He's po'd that he's paying $92 a month for service that doesn't work. I told him he needed a new DSL modem.
View 2 Replies
View Related
May 24, 2011
I had a new computer delivered today and it will only connect with the ethernet cable, not wirelessly. My housemate's computer still connects fine, my old computer connected fine, the trouble shooting option doesn't work. I'm using windows 7. The computer recognises the wireless strength as 'excellent' but simply informs me that it is unable to connect.
View 3 Replies
View Related
Mar 25, 2012
I just bought a brand new Linksys Cisco E3200 router. I set almost everything up in my house through the included software and went to port forward for some of my games. I realized I had something wrong with the ports and when I went back to access the ports through the web by typing in 192.168.1.1 which is the way I originally did the ports I could not. I then opened the software that came with the router and it could not detect the wireless network even though that is what I am using to type this now.
View 1 Replies
View Related
Dec 11, 2012
I am about to configure a brand new AIR-WLC2106-K9 V05 and didn't manage to find what is the deafult IP address configured on the device. I need it so I could start Web GUI management session.
View 4 Replies
View Related
Aug 21, 2012
So i recently purchased a new laptop, Lenovo y580, came with win7 home premium, 8gbs ram. But i noticed the downloading speed is around 30-100kb/s, which i have no problem getting 1mb/s on any of my other computers. I'm using comcast and i really doubt its their service, I tried to upgrade my wireless router firmware, reinstalling the wireless adapter, and they didn't seems to work.
View 8 Replies
View Related
Jan 3, 2012
I just bought a HP Pavilion h9. I enjoyed surfing and gaming for a few days when my wireless decided to disappear (when my brother was using it. He can't remember what he was doing when the problem occured)There seems to be nothing wrong with the router (an AirPort Extreme) since all the 4 of my households laptops can "see" and connect without problems.I've been trying to update my 802.11n WLAN card and other basic stuff, such as restoring to the day before the issue occurred.
View 7 Replies
View Related
Jun 6, 2012
Just a few days my vostro 3450 was arrived, and at that ocasion, I got a wifi connection once with my (preferred OS) xubuntu 12.04.
Now, when I type "Fn+F2", just the bluetouth interface start, but the wifi interface not.
View 2 Replies
View Related
Jan 17, 2013
Any one experience with this issue that cannot access to console port. USB serial cable and terminal server working fine with all other ASA 5510 except one of them. I rarely see the console and aux port failed to response.
View 2 Replies
View Related
Nov 29, 2012
I have a brand new 1921 router that I can't login to using cisco/cisco. Is there a new password?
[URL]
I don't have physical access so I can't reboot it until Monday. Just wanted to get it working today.
View 8 Replies
View Related
Sep 22, 2011
After a brand new Router/Modem combo., there is NO local/wired connection with XP, although other PCs has a good connection with strong signal.
Is it because a spectific folder needed for wired/local connection got lost, .... or Networking card inside got defective?
View 3 Replies
View Related
Dec 27, 2012
I just got a new Lenovo Ideapad y500 a few days ago, and the internet speed has been incredibly slow from the get-go. Loading images on pages takes way longer than it should, I can't watch streaming videos that last 4 minutes without it pausing to buffer every 5-10 seconds. It took about 20 minutes to download a 50mb file. My 4 year old laptop loads everything way faster, especially when downloading files. I did a ping test on both and everything was about the same, except I got a download speed of .75 mb/s on the new laptop, and between 12-17 mb/s on the old laptopI did a few ping tests, and this is what I got:Ping: 25 msDownload speed: .75 mbpsUpload speed: 4.10 mpbs.
And then I tried the same test with the laptop plugged directly in to the router with the ethernet cable and I got a ping of 20 + download speed of 25.12 mbps, and I tried loading a few youtube videos and they ran perfectly. Then I ran the test again over wifi, only this time I ran it sitting right next to the router. Still got download speeds of about 20 mbps. As soon as I got back to my room (which isn't that far from the router) the download speed dropped back to ~.80 and everything went back to loading slow again. The thing is, running the test from the exact same spot in my room on my old laptop, I still was able to get download speeds of around 18 mbps. My network card is an Intel Centrino Wireless N-2230 and the router is Linksys WRT150N wireless-n.I've tried downloading the wireless drivers from Lenovo, and it didn't change anything. So those are up to date. There were no firmware updates available for the router on Linksys' site
View 2 Replies
View Related
Aug 25, 2011
I purchased a new laptop (wireless-n). However, the old laptop I have from 6 six years ago (wireless g) has a faster wireless connection than the new one (20-25 mbps vs. 0.50-1.00 mbps). The 2 computers are at the same location in the house in regards to the router.
View 12 Replies
View Related
Jul 11, 2012
i want to coverage area of Wi-Fi router of any brand
View 2 Replies
View Related
Oct 24, 2012
When the ethernet cable is plugged directly into my laptop i can input my user name and password and connect directly without a problem. But as soon as i plug the cable into the router, the activity lights turn off like its not plugged in on the other end...which it is. So when going through the setup process, both using the cd and inputting the information on the web based setup. It does nothing, the automatic setup says the cable isnt plugged in. When using the browser setup i can click connect as many times as i want and it does nothing but say disconnected.
View 9 Replies
View Related
Aug 29, 2010
I'm running Windows 7 64-bit with the very latest AE1000 driver (3.0.10.0). I have a Netgear WNDR3700 with dual band support. I replaced a D-Link DWA-556 PCIe 2.4 GHz card with this USB unit because I was seeing interference with my keyboard and mouse (Logitech Bluetooth). When the AE1000 works, I can consistently connect at 300 Mbps and the speed is great.Unfortunately, every so often, the connection to the internet drops and Windows 7 must do a wireless adapter reset in order to regain access to my network. During this time no other machines connected on the wireless network report any disruption and neither the 2.4 GHz or 5 GHz WiFi profiles are connectable with the AE1000.I've tried switching from the built-in USB 2.0 ports on my motherboard to the USB 3.0 daughtercard to no avail. I've tried uninstalling and reinstalling the driver. However, I started seeing this issue literally the day I installed this thing. The problem happens sometimes a few instances in an hour but then won't happen again for another few hours.In Event Viewer, I'm pretty consistently seeing:The TCP/IP NetBIOS Helper service was successfully sent a stop control. The reason specified was: 0x40030011 [Operating System: Network Connectivity (Planned)]
View 9 Replies
View Related
May 20, 2011
I saw some other mentions online of intermittent internet connectivity using the factory-installed Intel Centrino wireless-N 1030 card on various new Dell computers running Windows 7, but didn't see any resolution to the problem.
I can connect directly to my router via an ethernet cord, but trying to use the wireless card gives me intermittent connectivity. I will pretty quickly lose the ability to load a new page if I'm browsing with IE or Firefox, and can regain it (temporarily) by disconnecting/reconnecting or letting the wireless manager troubleshoot, during which it resets the wireless adaptor. Doing a continuous ping of my router gives me anywhere from 30-70% data loss and lengthy round trips (I am currently one foot away from the router). Other (ancient!) computers work fine on my router; I have updated the router's firmware/reset it many times, etc). I didn't specifically go download a new driver for the wireless card, but going into its properties and having it search for an updated driver results in it reporting it already has the most up-to-date driver.
I spent a lot of late nights talking to Dell support, and their eventual fix (after a complete reinstall from the factory setting partition) was to set up my home network as a WEP, which I'm not happy with due to it's poor security compared to WPA2/WPA. This appeared to resolve the connectivity issue (why??). But I feel like I should be able to use WPA2 security with a brand-new laptop. So I changed it back to WPA2/WPA and tried installing all the critical updates that Windows Update could find, including SP1, and then looked at some continuous pings of various webpages and of my router itself.
Then I noticed my ping round trip time was awesome and they were 100% successful while my computer was plugged in with the power cord, but this unfailingly changed to reporting unsuccessful pings and having 1000ms round trips as soon as I disconnect the power. Seems like the on-battery power settings are starving the wireless card?
Also, I'm sure my initial intermittent connectivity (before the complete OS reinstall) was still occurring while plugged in with the power cord, so I'm not sure if the reinstall fixed some aspect of the problem, or whether the appearance of success while plugged in now is just temporary. Perhaps my card is just bad and I need a new one? I'm using the factory default power settings and the factory-installed wireless card (and I couldn't choose a different wireless card when I built my laptop)
View 53 Replies
View Related
Jun 26, 2011
I have a brand new E4200 constantly losing internet connection (both wireless and wired). I have a ADSL connection to the internet, last router I had did not have the same issue. I also have a Cisco ASA 5505 for work connected to the ADSL modem and is not experiencing any disconnect issues. All computers connected to the router is losing internet connection, local lan keeps working. The internet connection gets back again after a 10-15 minutes or when resetting / turning off the router.
I have tried the following;
Changed ethernet cables
Disconnected the ASA 5505
Turned off wireless
Upgraded the firmware
Reseted to factory settings
View 9 Replies
View Related
Oct 26, 2011
I just bought an XPS 8300 brand new.After woeking OK a few days, now it connects to the Broadcom Netlink Communication card only after rebooting 3-4 times at cold-start.
All the other home computers are connecting from the first shot. (two laptops and another desktop. They much slower computers.At the begining I have re-installed the driver (from DVD and downloaded), but not this is the problem.
The computer has to get a bit warm.When it does not connect, the Dell Test tool DOES NOT SEE (does not appear in the test list) the Broadcom NetLink Gigabite Ethernet card.
View 285 Replies
View Related
Jul 20, 2012
i have the asa5505 with asa8.4.5 and asdm 6.4.2. my asa work like site to site vpn with the other asa5505. i would be love that monitoring status of VPN. i enabled on asa logging, i puted address of smtp server, receipent email, source email, the problem is because my smtp server require authentication, TLS. how set configuration on asa5505?
configuration of logging for send notification on email.
View 3 Replies
View Related
Jan 22, 2011
We are pulled the plug on our PIX 501 as its not letting us use all 100Mbit that our cable provider is now piping to us. I read the conversion guide but it made no mention of the 501's. Only the 515's or newer.The ASA5505 is putting up a little bit of a fight (This what I get for failing my CCNA??)After refusing to configure the LAN ip address to something other than what it was shipped with, I broke down and connected to the management console and forced an IP address on the LAN side. Now I reset my default config and everyone can get on the internet.Until the ISP cuts you off because you forgot to set your static IP. Oh, and by the way, they dont support Cisco gear.
When I attempt to assign the IP to the outside interface, it accepts without a hitch, but everything grinds to a halt. I cannot have this, as I have off-site users that operate with dedicated ports using Remote Desktop. I've attempted to set the IP via both ASDM and management console. I've tried setting a static route, but that doesnt give me any love either. Im running ASA Version 8.2(1) and ASDM Version 6.2(1)Once I get the static IP set and working properly, I can tackle moving the port configs.
View 10 Replies
View Related
Jun 17, 2012
Can I have two IPSec tunnels over two different Internet links to two different destination?
View 1 Replies
View Related
Aug 22, 2012
Our client has a vendor who needs to establish a VPN tunnel to their own router which sits behind our Firewall.
VPN Concentrator (Vendor) <------> ASA5505 Client (7.2) <-------> 3750 Switch <-------> VPN ASA outside Interface - 208.64.1x.x4 DG - 208.64.1x.x3
ASA Inside Interface - 172.20.58.13/30
3750 Switch Interface Connected to ASA - 172.20.58.14/30 and DG - 172.20.58.13
3750 Switch Interface connected to VPN router - 172.20.58.21
VPN Router Interface connected to the 3750 - 172.20.58.22/30 DG - 172.20.58.21
I have also attached a Visio for this and the running configuration from the ASA and 3750. We don't have access to the TNS VPN router. Our responsibility is to just to make sure the tunnel comes up.
1) Create a static NAT on the ASA for Public to Private IP of the VPN router
Public - 208.64.1x.x5 / 28
Private - 172.20.58.21 / 30
Will the ASA automatically ARP for this address or do i have to configure another interface on the ASA with this public IP?
2) What would the access list look like on the ASA?
3) The client gave us some config to copy the stuff on the ASA so that they can create the tunnel but i couldn't put those commands in the ASA. How would this be applied and on what interface?
Firewall Access: The following information pertains to access between the VPN router and the
VPN concentrator. If a firewall/router is present in front of the VPN the following services need to be
allowed:
permit esp host 208.224.x.x any
permit gre host 208.224.x.x any
permit udp host 208.224.x.x any eq isakmp
permit udp host 208.224.x.x any eq non500-isakmp(code )
View 2 Replies
View Related
Jan 19, 2012
am not sure if it is different on the 8.2 or if I am missing something. I can connect to the vpn but cannot get to the inside computers. I can ping them from the ASA but not from the vpn client.
View 17 Replies
View Related
Jun 16, 2011
I have ASA 5505 with outside interface IP 206.206.206.5 I configured the SSL vpn on this but still i am getting page can not be displaed when opening https://206.206.206.5 from broadband.
Below is the related configuration in ASA. What needs to be done in order to able to connect SSL vpn.
group-policy GroupPolicy1 internalgroup-policy GroupPolicy1 attributesvpn-tunnel-protocol IPSec l2tp-ipsecwebvpn functions url-entry file-access file-entry file-browsing
tunnel-group DefaultWEBVPNGroup general-attributesdefault-group-policy GroupPolicy1tunnel-group DefaultWEBVPNGroup webvpn-attributesnbns-server 10.10.10.11 timeout 2 retry 2
policy-map type inspect http Http_inspect_policyparameters protocol-violation action drop-connectionclass BlockDomainClass resetpolicy-map global-policyclass global-class inspect dns inspect esmtp inspect ftp inspect netbios inspect rsh inspect rtsp inspect snmp inspect sqlnet inspect tftp inspect xdmcp inspect icmppolicy-map inside-policyclass HTTPTrafic inspect http Http_inspect_policy!service-policy global-policy global
webvpnenable outsideurl-list nuk001 "abc002" cifs://10.10.10.1 1
View 2 Replies
View Related
Jun 26, 2012
We have multiple servers on the DMZ (192.168.2.0/24) but they cannot access any resources in the Inside, by default. We would like to open up a Syslog server from the Inside (10.1.1.5) to the DMZ servers, so we can collect system log from the servers.
View 2 Replies
View Related
Nov 17, 2011
I have an ASA 5505 with the Security License running 8.4 and 6.4.5 software, I have a fully working VPN solution on there using a ISP IP - works fine. My boss wants to split the lines/bandwidth to another ISP we have coming into the office. So what I want to acheieve if possible is this Say my current isp is 5.5.5.5, my internal network is 192.168.2.x and my other ISP is 6.6.6.6 - is it possible to use the ASA to accept VPN clients from both ISP's and use the internal network?
View 2 Replies
View Related
Jan 17, 2012
I have 4 remote sites that are using a ASA as thir firewall / router. I'm setting up a full mesh VPN between all the sites. One of the sites have a UC500 and the other sites access that UC over the VPN tunnels. I would like to set up some basic QoS for the VOIP traffic
The site that has the UC will have multiple vpn tunnles coming in from the remote sites. How will I do QoS with voice traffic on that site?
View 11 Replies
View Related
Jul 8, 2012
I have 2 office buildings using Cisco 800 series routers with a L2L VPN between both. I'm upgrading the router to an ASA5505 at one of the offices but can't figure out the L2L VPN on the ASA. Specifically, can't figure out how to set the pre-shared key. On the Cisco 800 it's:That doesn't seem to work on the ASA. Here is my current config on the Cisco 800. [code]
View 9 Replies
View Related
Jun 17, 2011
I need to create second VPN in same ASA5505, it has already a VPN to one of our clients. So it alredy have a transformset,cryptomap,policy.Now i need to create new one. i like to create a seperate transformset and crypto map for this 2nd VPN with a new name to identfy very easily.But i have doubt like may it will affect the current VPN? because it has another VPN with another tranformset and cryptomap.......
1) will it affect the current VPN?
2) do i need to create a seperate tranformset and cryptomap? or with same tranformset and cryptomap with different number.....if it possible to create multiple cryptomap then i would like that to create.....
View 2 Replies
View Related
Sep 25, 2012
My company purchased a PAK for ASA5505-SEC-PL a while back. I found it unopened and need to know if it can be used, without activating it on an ASA. I opened up a case with the Cisco TAC, provided them the PAK serial number and got the following responses from 2 different individuals:
1.Since the product was covered under warranty and then expired this means that the activation key was used before.
2. This PAK number is expired since (Warranty End Date 21-Feb-2009).
I responded that I am not interested in warranty information but I just want to know if the PAK can be used. Just because the warranty expired, does that REALLY mean the PAK can no longer be used? That doesnt make sense to me. Isn't there a tool on Cisco's website to put in the PAK S/N to see if it is available, has been used, and if so, when?
View 2 Replies
View Related
Aug 6, 2012
I have 2 x ASA 5505's , I would like one to sit at my office behind an ADSL router with a static IP address, and be configured as a Server. I would like the other to connect to an ADSL router with a dynamic IP address, and be configured as a Client.
This must be a plug & play setup, so that when the 5505 client is plugged into ANY broadband router, it automatically creates a VPN tunnel to the 5505 server. Incase it's relevant... the purpose of this link will be to stream video data back to my office from remote locations. We have "played" around with the ASDM, EasyVPN and wizzards and still cannot get this to work!
View 3 Replies
View Related
Jul 3, 2012
i exported config file from asa5505. i changed this file and i imported in my asa5510. can you tell me that config file allright
View 1 Replies
View Related
