Cisco WAN :: 2811 Characters Are Not Recognizable
Dec 22, 2008I typed confreg 0x2124 and reset my 2811 and now the characters are not recognizable.
View 4 Replies
ADVERTISEMENT
Cisco :: 2811 / Aux Login With Junk Characters?
Jun 25, 2012I have 2811 router and tried to login through AUX port. I am using multitech modem to dial. When i try to login i am getting all special characters in the screen. I have changed the cable but still the same result. I have tried with different link speed also.
When i checked the router , it is showing AUX user is logged in at the time if issue(with show user command).But i am getting only junk character and some times blank screen.
Acceptable Characters In Ping?
Apr 16, 2012I took a SANS 401 class a few years back, and I remember them showing us how you could break PING (buffer- overflow? memory stack?)by pinging things you wouldn't normally.This was on WinXP I can't duplicate this on Win7, and have forgotten what exactly it was we typed in....I think it was some ALT-code characters, or a tick, 0x33 or something....I realize PING can take octal, decimal, and hexadecimal values?
View 5 Replies View RelatedCisco VPN :: ASA 8.4 Ldap Attribute-map Does Not Support Special Characters
Sep 20, 2011After trying for several hours to configure ldap attribute to cisco attribute mapping, I found that special characters are not supported by ldap attribute-map at least on 8.4
Here is the problematic configuration:
ldap attribute-map ldap_memberof_map
map-name memberOf Group-Policy
map-value memberOf
[Code].....
Cisco Wireless :: WAP321 Not Accepting WPA2 PSK Longer Than 32 Characters?
May 13, 2012I just got one of these and it works pretty good except I can't get it to take more than a 32 character WPA2 PSK. Tried using Firefox and IE and it doesn't make a difference. This is for my house. I'm retiring an old Cisco 1200 series AP and as well as a Cisco 1130. Using the same PSK and it doesn't work. Even if I just put 32 characters and just try typing more characters, it doesn't accept any more.Running 1.0.0.3 code and don't see anything newer or any firmware for it for that matter.
View 4 Replies View RelatedCisco Wireless :: Aironet 1200 - Encryption Key Must Be 26 Hexadecimal Characters
Oct 1, 2011I have a Cisco Aironet 1200 series Access point and currently i am using wep with 128 bit . My concern is that i want to change this key with current SSID .
My current SSID is ABtc. My current key is abcdefgh12345. when i try to change the key its give me error :
"encryption key must be 26 hexadecimal characters" .
Disable Show Characters Box In Wifi Security In Windows 7?
Aug 23, 2011sometimes I let my friends to use my laptop but unfortunately they can see password of my wireless router which my laptop is connected to by going to this wifi network Properties and then to Security and then check in "Show Characters" box..so is there any way to prevent them from seeing my wifi network password in Windows 7?
View 1 Replies View RelatedLinksys Cable / DSL :: WAG320N Admin Password Length And Valid Characters
Jan 19, 2011I set the password for the router management consisting of 115 characters. Now I can not log into the router.
1. What is the maximum length of passwords to manage the WAG320N router?
2. What are valid characters in a password for this router?
D-link Dcs Network Camera :: Wifi Password With Special Characters Not Supported?
Dec 1, 2012I have been trying to connect a camera to the wifi router at my mother's assisted living facility. The password has a special character, "!".
After hours waiting on the phone with tech support, they confirmed that only letters and numbers are supported. Guess i have to take it back.
Incidentally, the software is changing "!" to "%21", which is the escape sequence used in URL's. The camera software isn't mapping it back. Should be fixable in firmware.
Cisco AAA/Identity/Nac :: ISE 1.1.1 Sponsor Portal - Change The Rule Which Checks The Fields For Illegal Characters?
Oct 16, 2012Regarding our international subsidiaries there are many names that contain the character "-" (i.e. Pierre-Pascal)When trying to create an new Guest Account the ISE refuses it because of an invalid character in the "First Name" field.In other formular fields i.e. Email Address - the character "-" is allowed.Is it possible to change the rule which checks the fields for illegal characters? (Is it a Bug?)
View 3 Replies View RelatedLinksys Wireless Adapters :: AE1000 - Network Login Password 5 Characters Long?
Jun 30, 2012I am installing my AE1000 in a new computer. During installation I enter my wireless network password which is on 5 characters long but the next tab does not light up to proceed to the next step. It only lights with 8 characters though my password is 5 characters long
View 2 Replies View RelatedCisco VPN :: Use 2811 Instead Of PIX For VPN?
Sep 19, 2012My setup is ISP-2811-PIX 515E-LAN. Right now, I am doing a PAT for IPSEC tunnels to terminate on the PIX. Do you recommend I use the 2811 instead of PIX for VPN or keep things the way it is? Trying to determine the best box to use.
View 4 Replies View RelatedCisco :: Which IOS For 2811
May 27, 2013I need to know which IOS should I download for my 2811 router to get all ip sla features
Router(config)# ip sla ?
<1-2147483> Entry Number
auto
enable
Note this is from my 2951 router.
I need full features like this in my 2811 router.so which IOS should I download.
Cisco :: 2811 To Upgrade LMS 3.2 To 4.1
Feb 29, 2012I want to upgrade LMS 3.2 to 4.1. But when I look to "Special Notes and Exceptions for Devices Supported" document ,It seems that 2811 have 2 SysID.
Why there are two IDs for the same hardware and under which ID will my 2811 routers be classified into inventory database. This information is important since customer want to have support of 2811 in CiscoView of LMS 4.1 (around 200 devices).
Cisco WAN :: CoPP On 2811 ISR?
Aug 23, 2012Looking to implement CoPP in our 2811 ISR. We currently have the base 256mb of DRAM in there. Will this bring our router to its knees? I've priced a RAM upgrade.
View 0 Replies View RelatedCisco WAN :: Setup NAT On 2811?
Mar 19, 2012i have a branch router that connects to mpls WAN. Also has a second interface that is used for dmvpn failover in case WAN goes down.We want to use this second interface also as the primary internet circuit for the branch. I changed the default route to the next hop address on the other side of the second interface and expected this to work.But i was told i need to set up NAT for this to work, and set up an ACL for NAT to use. how to set up NAT?
View 1 Replies View RelatedCisco WAN :: Configuring BGP With 2811
Nov 2, 2011I have BGP router 2811. Want to configure BGP on it with two ISPs. How can i configure it?
View 1 Replies View RelatedCisco WAN :: 2811 - Configuration Of Router And BGP
Nov 8, 2011I want to configure BGP but i am finding it very difficult to know BGP as I am new to this concept.
What is theoretical and practical approach to configure bgp??
I have to configure my office router 2811 for two ISPs which will be acting as fail-over.
I have to start it from scratch.
Cisco VPN :: 2811 / VPN Connects But Can't See Network
Feb 14, 2013I have a 2811 that I can remotely VPN to using Cisco VPN client however I cannot see the internal admin network (10.35.5.0).
Current configuration : 4845 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
[code].....
Cisco WAN :: 2811 With G.SHDSL WIC CPU Running At 99%
Sep 23, 2012I have a particular site that is causing me trouble, this site is connected in a back to back configuration using 2811 at CO and 2621XM at CPE. The CO end is also the CO for 3 other sites so has a total of 4 wics installed (WIC-1SHDSL-v2), these other sites also have 2621XMs for the CPE.
The problem i am getting is when one site in particular transfers large files to/from client machines, the CPU on the 2811 jumps to 99%:
CPU utilization for five seconds: 99%/98%; one minute: 26%;
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
11 12881868 37249378 345 0.49% 0.50% 0.51% 0 ARP Input
54 8548592 30375358 281 0.40% 0.45% 0.41% 0 XDSL BACKGROUND
[Code]......
Cisco WAN :: 2811 - External IP Not Pingable From Outside
Apr 20, 2013We have a cisco 2811 router with 2 ADSL interfaces. One dialer interface is used for internet and another dialer interface is used for VPN.
The dialer interface that is used for internet purpose is "Dialer 1" and the VPN is "Dialer 2".
The route looks like this: ip route 0.0.0.0 0.0.0.0 dialer 1
Basically, I am able to the ping the external IP address associated with the Dialer 1 interface, however, I cannot ping the external IP address associated with Dialer 2.
Cisco WAN :: 2811 NAT Anything Heading Out Of WAN Port
Mar 22, 2012I have a Cisco 2811 with an additional HWIC-4ESW card. [code] I need to NAT anything heading out of the WAN port. [code] I can ping anything connected to my other private networks from my 10.0.24.0 network but nothing on the Internet. [code]
View 3 Replies View RelatedCisco WAN :: 2811 To Enable Ssh On A Router
Jan 3, 2012I just bought an additional router for my network and I'm in the process of setting it up.I have however hit a snag with enabling ssh on the device. It is a cisco router 2811 running IOS 15.0 (refer below to my attempts)
View 3 Replies View RelatedCisco WAN :: IOS Image Download 2811?
Sep 4, 2011I want the below mentioned IOS image for backup purpose. But I am not finding it in cisco.com or anywhere in the in internet. where can I get this version of image other than my router.
c2800nm-advsecurityk9-mz.124-3d.bin
Cisco WAN :: Configuring ASA5510 With 2811 ISR
May 26, 2012I have a 2811 ISR configured to provide the following services to my network: Internet access to LAN usersCisco Call Manager ExpressSite-to-stie VPN to 3rd party networksVPN server to provide VPN access to remote usersSecurity Zone configurationsStatic NAT configurations.Now I recently just got the ASA5510 device and I am not sure how to go about with the setup, whether to put the ASA in between the internet and the ISR (Internet - ASA - ISR - LAN), or put the ISR in between the internet and the ASA (Internet - ISR - ASA - LAN)? While i know I can move most of the config unto the ASA, i know that the CME cannot be moved, hence I would like to do the setup such that users on the network still have access to CME.
View 2 Replies View RelatedCisco :: Setup NTP Server Using 2811?
Sep 30, 2012I've setup a NTP service by using Cisco 2811 routers. This works fine at the moment, but in the end there are some questions left.
1. I'm using two 2811 Routers, one for primary, which is resceiving the time from PUBLIC NTP 1, and one for backup, which is resceiving the time from PUBLIC NTP 2. Is it possible to compare these to times an check if the match? And if not, generate an alarm via e.g. SNMP
2. Is it possible to check via SNMP, if the routers are reaching PUBLIC NTP 1 and PUBLIC NTP 2 for sync?
Cisco WAN :: 2811 / Securing Ports In Nat?
Mar 22, 2012I have a site that is connected to the internet via T1 into 2811 runing C2800NM-ADVENTERPRISEK9-M), Version 12.4(11)X. I have noticed that when i do a port scan on the outside nat pool i see well know ports in the closed state .ie...7,21,22,23,25,99,100,80,443. These pools for end users to access internet. Does this pose a security risk? What can i change to provide end user access to web but not let these well know ports open?
View 6 Replies View RelatedCisco WAN :: 2811 DSL Load Balancing
Dec 9, 2010I have a Cisco 2811 router with two HWIC-ADSL cards configured for dsl connection. I have two lines from the same ISP and i am load balancing between them. I have created a couple of SLA's to check the state of the connections and add to the routing table the two default routes if both are up or any one of them is up.My problem is that when i try to download big files (especially antivirus updates) the download at some point stops (especially the antivirus exits with an error of unreachability). If i shut down one line everything works fine.Could i use something (configuration-wise) to prevent this problem from happening?????Is there any way i can combine the two lines? They are simple ADSL connctions with static ip's.
View 8 Replies View RelatedCisco VPN :: Create A VPN Between 2 Host With 2811 And NAT?
Jan 12, 2012I want to create a VPN between two PC's, (the server "Data" and "Remote Desktop" check the topology below), the Router Clabeck (cisco 2811 ) is connected to the internet through int f0/0 using a PPPoE connection and connects all the LAN PC's by PAT to the internet (you can see all the configurations in the Show Run below), the "Remote Desktop" is any PC with internet connection.
F0/1 F0/0
DATA--------------------SW-------------------ROUTER(Cisco 2811)---------------------INTERNET---------------REMOTE DESKTOP
192.168.1.51 192.168.1.254 201.122.53.177 192.168.1.1
Current configuration : 2116 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
[code]....
Cisco Firewall :: 2811 ZBF URL Filtering
Apr 18, 2012I try to implement the url filtering feature on a cisco 2811 router and whenever i enable the parameter map patterns the router retuns (after some time)
%Unable to compile obj regex.[code] The result is that the router blocks ALL webpages without giving a block page message.
Cisco WAN :: 2811 IOS For BGP Routing Protocol
Jul 6, 2011I am currently configuring a number of cisco 2811 routers that require the BGP exterior routing protocol, however the IOS version (12.4) currently installed does not support the bgp protocol.After entering the commands into the cisco CLI 'protocol not in this image' is returned.
View 2 Replies View RelatedCisco WAN :: 2811 Router LAN Ports?
Jun 14, 2012how many extra interface port can be plugged in to the 2811 router ,there are 2 fixed FE port on this router and i have 3 connection i.e one mpls link , one internet link and one sip trunk .. some body confirm me that i can insert module in 2811 ?
View 5 Replies View RelatedCisco WAN :: 2811 High Cpu Utilization
Apr 29, 2013I have a 2811 that is really hitting the CPU hard. Nothing shows on CPU processes. It has an IPsec VPN tunnel back to HQ which also has a 2811 that terminates the VPN. The HQ has 2-3 IPsec tunnels to other remote sites. The CPU at the HQ avg 50% utilization during business hrs, peaks at about 80%. The remote one is very high 95% peaks, avg 80%-95% during business hours with bandwidth utilization of only 10-20Mbps. I read somewhere that its possible that fragmentation could be causing this. My question is, if I set the MTU to 1450 on the remote, I am guessing I will need to do all the other routers as well, the HQ and other remote sites? Siince they use the same outside interface to my HQ, is that correct?
View 3 Replies View Related