Cisco WAN :: 5520 Fail Over Between Serial (MPLS) And Ethernet (VPN)
Dec 29, 2011
I have a 1941 router with the security licence. I am setting up both a T1 wic that connects to my enterprise MPLS cloud and one of the two gig interfaces that will connect to my home office through a VPN tunnel to a ASA 5520. I have tried multiple solutions though my gues is that I am making this WAY more difficult than it needs to be. What I am trying to create is a primary on the serial interface and then a failover through the VPN.So far, I have tried to:
-Track the serial interface and then set the default route, based on the tracking
-Create an IP SLA to echo the gateway of the serial interface to change the routing
-Started to create HSRP between the two interfaces though I could not figure out if / how a standby could be put into a sub-interface on the serial
The SLA seems to be working somewhat. The problem is that it is not transparent and sometimes even needs me to clear the VPN tunnel to get things back to smoothly through the serial interface. [code]
View 1 Replies
ADVERTISEMENT
Feb 27, 2013
there is a line set with a provider with EoMPLS.This is an international line coming with 10M connectivity.the line is working fine with udp traffic but with tcp we don t get any use more than 1M.
View 7 Replies
View Related
Apr 20, 2011
We have a wan serial connection connected to cisco router 1750, and we want to upgrade the serial connection to ethernet but we haven't any additional ethernet interface on the router. Is there any converter from ethernet to serial?
View 8 Replies
View Related
Mar 4, 2012
Is it possible to simulate ISDN in a lab using a serial or ethernet interface. I want to setup FR and have ISDN running between a couple of routers with DoD routing.
View 6 Replies
View Related
Dec 6, 2011
I know serial interfaces are called that because they put bits on the wire serially - i.e. one bit at a time. If that's the case for serial interfaces, how do other kinds of interfaces, such as Ethernet interfaces, put bits on the wire? Do they somehow put more than one bit on the wire at a time? I assume it's a faster process, but how so?
View 4 Replies
View Related
Aug 12, 2011
What is the advantage of using MPLS compare with Ethernet? And do MPLS provide a internet access?
View 1 Replies
View Related
Oct 24, 2011
I have a faulty ASA5520 and I am not sure if I have a SMART net contract for it or not (I manage over 200+ ASAs). The problem is that the Serial Number sticker that is normally on the back of the ASA is missing. The ASA5520 is also faulty and doesn't power on so I cannot boot it up and run 'show ver' or similar. If I open the chassis there appears to be other Serial numbers on the Power Supply, and Motherboard etc but they do not seem to be the correct Chassis serial number i.e not in the right format, and if I put them into the Trade tool I get no results.
There must be another record of the serial numbers besides 1x sticker to the rear of the chassis that can fall off? How I can get the chassis serial when the device isn't booting. or (Cisco) is there a way to find the chassis serial number from the power or motherboard serial?
View 4 Replies
View Related
Dec 15, 2011
Purchased and configured 2951 router based on Telco specs that required T3/DS3 card with coax connection for MPLS. When telco showed up to install DS3 they handed me a UTP copper connection.... Can I use one of the Gigabit ethernet connections on the 2951 as my MPLS interface into the provider's cloud?
View 2 Replies
View Related
May 26, 2012
I am having cisco asa 5520 with internet having public ip and cisco 2911 with mpls link in my office. the mpls link is between my HO and my branchmi am putting my webserver in the branch side i want to port forward one of my publicip in my office to be forwarded to branch we, server.is it poosible on the firewall ouside the local network.
View 3 Replies
View Related
Sep 20, 2011
I have an ASA 5520 running, user web trafic, incoming VPN and systems NAT for DMZ services. Nothing new for a standard firewall. I have upgraded the memory in it to 2GB, per Cisco so that I could install and run IOS 8.41. I have uploaded the both the IOS bn image and the ASDM 645 image and set it as the primary boot file. When I reload the ASA, everything boots fine, no errors and all traffic appears to be working fine.But here is my problem:ALL the previously configured VPN sessions will connect to the ASA and show that they are passing traffice (TX and RX increments through the monitor) but if I try to access a device on the other side of the VPN or they try to access services in the corporate network, the connection fails. Ping works, So I know I can reach the devices and the tunnel has been correctly created, but nothing else, . I did not change anything in the configurations for the VPN connectors.But, if I reload the ASA with the 8.21 version image, everything works just as before and all connections are good.
View 3 Replies
View Related
Jun 21, 2011
I am currently using g0/3 for failover between my two ASA5520's. I would like to move that to the management interface to free up g0/3 for a second DMZ segment. are there any implications to doing this live other than i would only have a single ASA during the move?
View 1 Replies
View Related
Jul 21, 2011
last night we tried to upgrade our cluster (2x ASA5520) from 8.0(4) to 8.2(3) and failed miserably.
1. Both units got the new image, but when we reloaded the secondary unit then we got the following strange message:
"Mate's license (10GE I/O Enabled) is not compatible with my license (10GE I/O Disabled). Fail over will be disabled."
After this message fail over was not there anymore and both units became active (!!!) which killed everything. Of course ASA5520 doesn't have 10GE and we have exactly the same units. What could be the problem here? Currently we run with a single unit with 8.2(3) and the secondary unit is switched off.
2. After the upgrade we cannot connect with multiple VPN sessions from the same client, this gets logged:
"Multiple sessions per tunnel are not supported"
This was working just fine with 8.0(4) and doesn't work with 8.2(3). Do we have to update something in the config or what is causing this? If you ask why we went with 8.2(3) instead of 8.2(5) then the answer is because we were testing that for several month in our secondary data center, but unfortunately only on a single ASA and not on a cluster. We couldn't go higher due to the 512MB RAM we have in all units.
And we had to upgrade, because we had crashes with 8.0(4) which was working fine for a long-long time.
View 7 Replies
View Related
Dec 12, 2012
Just upgraded to Win8 Pro last night by wi-fi. Cannot access internet router via ethernet cable. Cannot access wireless either.
Using Network & Internet troubleshooting for Internet Connections, I get:
Problem with wireless adapter or access point Not Fixed X "Local Area Connection" doesn't have a valid IP configuration Not Fixed X
If I do a ifconfig, I see that LAN has its media disconnected. But not wireless. HP Pavillion dv1190us Notebook PC.
View 1 Replies
View Related
Jul 11, 2012
I have P router (7206VXR) and I need to export netflow from its MPLS interfaces to the netflow software.
View 2 Replies
View Related
Feb 18, 2013
Installation of 2 x 4 Mbps MPLS circuit on primary router (CISCO 2951) and 1 x 8 Mbps Ethernet link on secondary router (Cisco 2951). We have successfully implement the primary router with 2 x 4 Mbps MPLS circuit. Site is having two computer room CR1 and CR2 and distance between both room is 200mts. CR1 is having primary core router and primary core switch where the service provider terminated the new MPLS circuit and we have done the successful implementation. CR2 is having Secondary core router and secondary core switch where we needs to have the termination of Ethernet link but service provider has delivered the Ethernet link on the CR1 which is incorrect DMARC Location.
Both the computer rooms are connected via optical copper can we use that copper to connect the circuit on CR2, as per my understanding we can use the optical fiber to connect the wind circuit on secondary router on CR2 by using the media connector.
View 1 Replies
View Related
Feb 22, 2012
We have two Cisco 2960 TT-L switches. I'd like to reduce single points of failure and have dual servers for most tasks. For example, two firewall servers and two web servers. Should one server fail the other will act as a failover.I'd like to extend the redundancy to the switches, and am thinking of connecting one web server to one switch, and one to the other. In the event a switch failed a set of servers would still run, and be able to talk to each other.I'd like to run two VLANs, one for the LAN, and one of the WAN, and connect the two VLANs on each of the switches with the associated VLAN on the other switch.
View 3 Replies
View Related
May 24, 2012
can i use a cat 5 cable to extend a 9 pin serial cable to connect my PC to my home audio controller? I have a serial to USB converter but my PC is upstairs and my audio component is downstairs?
View 1 Replies
View Related
Feb 6, 2013
I have configured four E1 links between two locations on my 3745 using WIC-2T cards. At both ends all the serial links are configured as ip unnunmbered fastethernet 0/0 encapsulation ppp OSPF is enabled without CEF I would like to know how load balancing will occur in this scenario?Will all my links be utilised at the same time? Will multiple links be used only when the need (in terms of bandwidth) arises?
View 3 Replies
View Related
Sep 9, 2012
I understand that IPv6 uses the MAC address of a LAN interface to make up the EUI-64 of a serial interface since serial interfaces don't have MACs. What happens when there is no LAN interface available? What if the switch has only serial interface cards?
View 2 Replies
View Related
Feb 1, 2012
Were bringing up a new site shortly and I'm trying to configure Serial0/0/0 which will be connected to an MPLS over 1.5m T1 line. I am basically doing a simular configuration as other sites where one of the ethernet interfaces is handed off from a fiber optic wan, but a T1 MPLS is connected to a WIC card and this provides a redundant path (though slower) in case of a fiber cut or equipment failure. This should be pretty straightforward but it appears as if I have no serial interface on this router. Card is in and everything, it is a VMIC-3-1MFT-T1/E1 in EHWIC 0.
View 7 Replies
View Related
Sep 29, 2011
i have LMS 3.2 installed in my campus. i need the serial number of the LMS suite to open a service request with cisco. but unable to find the same. How to find the same.
View 1 Replies
View Related
Dec 11, 2011
How to get Ciscoworks LMS 4.0.1 serial number ? I need that to put the product under mainrtenance, and I can't manage to get it.
View 2 Replies
View Related
Feb 19, 2013
Am having 2621 router, going to upgrade to gh speed wan interface card(HWIC-4ESW). whether it can able to handle routing as like a normal serial and ethernet interface? Shall i establish a new MPLS or Leased line connectivity in that interface(HWIC-4ESW) ?
View 5 Replies
View Related
Jan 14, 2013
Just like to ask first your inputs about the MTUs needed on our proposed setup. We currently have a large internal network composed of several metro ethernet links. We have different carriers and we all know that they do not always provide L1 connectivity. They sometimes do Q-in-Q or EoMPLS or other technologies that would hide their internal network and appear as a point-to-point ME circuit to customers.
We are planning to create our own MPLS network for our clients so we don't have to leak their networks inside ours and we are trying to avoid the overhead of GRE/IPSEC since we'll be adding a lot of client networks and the overhead is not reasonable. So we just thought of MPLS-VPN to at least reduce the overhead and we don't have to purchase a lot of network devices.
With that said, what is the safest thing to ask the carriers and what settings should i put in our network devices. I am still confused with the differences of MTU, IP MTU, and MPLS MTU.
We also have one circuit running 802.1q instead of using routed-port on the switch. Is 802.1q supported in LDP?
Our internal network is comprised of 6500 switches with Sup720 and Gigabit linecards and we are planning to use 3900 routers as PEs. We all hooked up our ME circuits across the 6500 switches.
View 1 Replies
View Related
Sep 21, 2011
tell me the IOS (c2600-???) needed to be able to do MPLS on the 2621 XM router?
View 2 Replies
View Related
Nov 23, 2011
I think the crappy usb to serial cable from china broke because when i boot up my cisco router, after it decompose the IOS image and shows all the interface links, it won't do anything. I can't get to user exec mode.anyways, i think my usb to serial cable is faultily. I got one that is from ebay for like 2 bucks and i think it is the reason why i can't even connect to my router now
View 3 Replies
View Related
Sep 7, 2011
IP Address : 192.168.1.0 /24
I need 50 hosts
I need to subnet for f 0/0 and s 0/0
I know for f 0/0 its 192.168.1.1 /26, but after hours and hours i can't seem how to subnet for the s 0/0
View 2 Replies
View Related
Apr 23, 2013
Any good way to force a serial link to delay packets to simulate a hi latency WAN link? Found this command so far:
Router(config-if)# transmitter-delay hdlc-flags
I can dial the speed up/down via clock rate all good but I need to also simulate latency. This is for simulating a WAN bonding scenario so I was going to aggregate a 10M ethernet port with a 2M serial and a 512k serial. But I need to also ensure varying latency.
View 2 Replies
View Related
Jan 22, 2012
Any good way of depicting serial links in Visio? Manually drawing is pretty clunky and quick searches in google isn't turning up much.
View 10 Replies
View Related
Dec 29, 2012
How to know the serial 0 or 1 (to v35 modem)was good or not ? is there any tool (software) or hardwire jumper to simulate loop back ?
View 12 Replies
View Related
Jun 14, 2011
From all of the documentation I am seeing, the 2911 does not support the NM-E3/T3 serial card.
View 16 Replies
View Related
Apr 11, 2006
How to know the serial0 or 1 (to v35 modem)was good or not ? is there any tool (software) or hardwire jumper to simulate loop back ?
View 4 Replies
View Related
Oct 21, 2004
I have a cisco router 2621 when i install the module cisco NM4T it is not detectetd. following are the outputs.i have tried IOS 12.2.15T15 & 12.3
booting up:
smart init is sizing iomem
ID MEMORY_REQ TYPE
0000A2 0X00103980 C2600 Dual Fast Ethernet
[Code]......
View 4 Replies
View Related
