Advantage Of Using MPLS Compare With Ethernet?
Aug 12, 2011What is the advantage of using MPLS compare with Ethernet? And do MPLS provide a internet access?
View 1 Replies
ADVERTISEMENT
Cisco :: Ethernet Over MPLS Quality?
Feb 27, 2013there is a line set with a provider with EoMPLS.This is an international line coming with 10M connectivity.the line is working fine with udp traffic but with tcp we don t get any use more than 1M.
View 7 Replies View RelatedCisco WAN :: Possible To Use Gigabit Ethernet On 2951 ISR For MPLS Connection?
Dec 15, 2011Purchased and configured 2951 router based on Telco specs that required T3/DS3 card with coax connection for MPLS. When telco showed up to install DS3 they handed me a UTP copper connection.... Can I use one of the Gigabit ethernet connections on the 2951 as my MPLS interface into the provider's cloud?
View 2 Replies View RelatedCisco WAN :: 5520 Fail Over Between Serial (MPLS) And Ethernet (VPN)
Dec 29, 2011I have a 1941 router with the security licence. I am setting up both a T1 wic that connects to my enterprise MPLS cloud and one of the two gig interfaces that will connect to my home office through a VPN tunnel to a ASA 5520. I have tried multiple solutions though my gues is that I am making this WAY more difficult than it needs to be. What I am trying to create is a primary on the serial interface and then a failover through the VPN.So far, I have tried to:
-Track the serial interface and then set the default route, based on the tracking
-Create an IP SLA to echo the gateway of the serial interface to change the routing
-Started to create HSRP between the two interfaces though I could not figure out if / how a standby could be put into a sub-interface on the serial
The SLA seems to be working somewhat. The problem is that it is not transparent and sometimes even needs me to clear the VPN tunnel to get things back to smoothly through the serial interface. [code]
Cisco :: 7206 MPLS To Export Netflow From Its MPLS
Jul 11, 2012I have P router (7206VXR) and I need to export netflow from its MPLS interfaces to the netflow software.
View 2 Replies View RelatedCisco WAN :: 2951 - Installation Of 2x4 Mbps MPLS Circuit And 1x8 Mbps Ethernet Link
Feb 18, 2013Installation of 2 x 4 Mbps MPLS circuit on primary router (CISCO 2951) and 1 x 8 Mbps Ethernet link on secondary router (Cisco 2951). We have successfully implement the primary router with 2 x 4 Mbps MPLS circuit. Site is having two computer room CR1 and CR2 and distance between both room is 200mts. CR1 is having primary core router and primary core switch where the service provider terminated the new MPLS circuit and we have done the successful implementation. CR2 is having Secondary core router and secondary core switch where we needs to have the termination of Ethernet link but service provider has delivered the Ethernet link on the CR1 which is incorrect DMARC Location.
Both the computer rooms are connected via optical copper can we use that copper to connect the circuit on CR2, as per my understanding we can use the optical fiber to connect the wind circuit on secondary router on CR2 by using the media connector.
Cisco WAN :: 1130AG / What Is The Advantage Of Upgrading IOS
Apr 27, 2012I have 100 nos of cisco 1130AG access points and I upgraded the ios for one of the access point.
the existing image is c1130-k9w7-tar.124-21a.JA1
upgraded image c1130-k9w7-tar.124-25d.JA.
what is the advantage of upgrading the ios.and i want to upgrade the image to all the access points at time?
Netwroking :: ASUS A8N - Take Advantage Of Multiple Network Interfaces
Jun 26, 2012The PC I'm using right now was built almost six years ago (ASUS A8N-SLI Premium), but it has dual Gbit NICs. My home file server was built four years ago using an entry level server board (Tyan S5211G2NR) and it also has two Gbit NICs.
I never quite understood how to take advantage of the multiple network interfaces. Can it be done through a standard unmanaged Gbit switch?
I'm building a new desktop, probably using the ASUS P8Z77-V mobo, which has just one NIC.
Linksys Wireless Router :: What Does E4200 Media Server Advantage
Oct 27, 2011I have 2 machines using Windows 7 and a Xbox 360. If I use the router for streaming media. Am I able to see the hard drive through the main computer it is hooked up to? Say if I dl something and want to put it on the external drive for media server. Can I save it to drive even though it is hooked up to the router? Overall. What does E4200 media server advantage have over something like windows media player to stream or windows media center?
View 3 Replies View RelatedCisco Firewall :: ASA 5585 - Advantage / Disadvantage For Using Multiple DMZs
Oct 16, 2011we are planning to use multiple DMZ's in our organization, we are using cisco asa 5585, what is the advantage and disadvantage for using multiple DMZ's?. and which better to use one or two DMZ's or split every service in different DMZ ?
View 7 Replies View RelatedCisco WAN :: Compare 2851 To 2921?
Oct 14, 2012I have an office with 50 users. I have both a 2851 and a 2921 available. Which one would be a better fit?
Comparativley, which is the more powerful unit?
Cisco Wireless :: Compare AIR-CAP1602I-E-K9 With AIR-AP1261N-E-K9
Jan 1, 2013Current, i have a project to deploy wifi for hotel 5 stars.And i have two type AP Cisco AIR-CAP1602I-E-K9 and AIR-AP1261N-E-K9 I want to compare performance about:
+ Coverage Radio ( Power transmitter, antenna gain)
+ Bandwith or throught put
+ Concurrent users or connection
Cisco WAN :: Compare WS-c2960s-24TS-s With PowerConnect 6224?
Feb 2, 2012I need to compare a cisco ws-c2960s-24TS-s with a PowerConnect 6224, the scenario is to interconnect SAN ISCSI to 1G in RJ45.
View 1 Replies View RelatedHome Network :: Topologies In Real Time Implementation Compare And Contrast Each Other
Apr 26, 2011Topologies in real time implementation compare and contrast each other?
View 3 Replies View RelatedLinksys Wireless Router :: Wrt160n Really Slow Wifi Compare To Wired?
Jun 25, 2012get a new router. but lets give it a try. I read many many post on how to optimize the speed of the router but none worked so far.I got a great wired Internet connexion hitting between 45 to 60 Mbps[URL] the wifi is crazy slow on Iphone, Macbook pro and iPad staying between 3 to 8 Mbps....
I tried to change all of the specs, did the firmware update. is there a perfect configuration with the new firmware ?
Cisco Routers :: How Does Quality And Longevity Of SRP500 Series Compare To RV Series
May 27, 2012My Draytek 2710 just dies after 2 years so I was looking for something a little more reliable and noticed the spec of the SRP527W-U.I take it with only one antenna and reading a couple of past discussions, the wireless will only manage n-lite as some people call it i.e. 150Mbps, and not the full 300? Oh, and are the ports still only 100M and not Gig?I know the 547 would tick both these boxes but we are talking twice the price. How does the quality and logevity of the SRP500 series compare to the RV series (which would need an adsl modem) or the Linksys boxes?
View 1 Replies View RelatedAny MPLS Providers
Nov 7, 2012We're looking at rolling out MPLS between each of our sites. probably more soon.Do you guys have favorite MPLS providers? How have your experiences been?
View 10 Replies View RelatedBroadband :: VPN Provision Using MPLS
Feb 28, 2011what is MPLS VPN and VPN over broadband. BSNL is providing VPN over broadband using MPLS.
View 1 Replies View RelatedCisco - How To Establish New MPLS
Feb 19, 2013Am having 2621 router, going to upgrade to gh speed wan interface card(HWIC-4ESW). whether it can able to handle routing as like a normal serial and ethernet interface? Shall i establish a new MPLS or Leased line connectivity in that interface(HWIC-4ESW) ?
View 5 Replies View RelatedCisco WAN :: MPLS MTU 6500 With SUP 720
Jan 14, 2013Just like to ask first your inputs about the MTUs needed on our proposed setup. We currently have a large internal network composed of several metro ethernet links. We have different carriers and we all know that they do not always provide L1 connectivity. They sometimes do Q-in-Q or EoMPLS or other technologies that would hide their internal network and appear as a point-to-point ME circuit to customers.
We are planning to create our own MPLS network for our clients so we don't have to leak their networks inside ours and we are trying to avoid the overhead of GRE/IPSEC since we'll be adding a lot of client networks and the overhead is not reasonable. So we just thought of MPLS-VPN to at least reduce the overhead and we don't have to purchase a lot of network devices.
With that said, what is the safest thing to ask the carriers and what settings should i put in our network devices. I am still confused with the differences of MTU, IP MTU, and MPLS MTU.
We also have one circuit running 802.1q instead of using routed-port on the switch. Is 802.1q supported in LDP?
Our internal network is comprised of 6500 switches with Sup720 and Gigabit linecards and we are planning to use 3900 routers as PEs. We all hooked up our ME circuits across the 6500 switches.
Cisco WAN :: IOS For 2621 XM That Has MPLS?
Sep 21, 2011tell me the IOS (c2600-???) needed to be able to do MPLS on the 2621 XM router?
View 2 Replies View RelatedCisco :: Purpose Of VPN Label In Mpls
Jan 29, 2013What is the purpose VPN label?As we know, in the MPLS VPN, the following mechanisms:RD - used to distinguish between overlapping routesRT - used to determine the VRF in which to send the route.But why need a VPN label?
View 11 Replies View RelatedAccessing Sever Via HTTP Over MPLS?
Sep 30, 2011This one is kicking my butt.I have an MPLS network with three stes.Site1 is where all my servers reside.Site2 and Site3 just have a few PC's.From Site2 and Site3 I cannot access the server at Site1 via http://IPADRESS.Of.Server.I am able to ping just fine.I thought it may be a router issue but... there is is a single PC at Site2 that can access it with out any issues.All the IP settings (Default GW, DNS, etc...) match the other PCs.The windows firewall is turned off on all PC's. AVG is disabled on the PCs.
View 9 Replies View RelatedCisco WAN :: 7609 / MPLS Over GRE Tunnels?
May 7, 2008Configuring MPLS over GRE tunnels. I did not find any proper configuration example. I need to do this for encrypt the traffic between two PE routers. I have 7609 routers.
View 20 Replies View RelatedCisco WAN :: 150 3G Router On MPLS Network
Mar 24, 2013I currently have a 150 nodes MPLS network. My management is anxious to join some sites with 3G routers as their centres move around a lot.My current MPLS site as 4 x Ps with lots of PEs linking to the 150 x CEs. Is there a way to easily link up my 3G routers to my MPLS network? I have heard DMVPN may be a solution, but not sure how to implement.
View 4 Replies View RelatedCisco WAN :: MPLS Connection On 861 K9 Router?
Jan 5, 2011Recently i purchased Cisco 861-K9 router for my head office.
I have 2 offices (1 is head-office & other is Branch.). i have MPLS Connectivity between 2 offices.
i used 861-K9 WAN port for MPLS Connection.
My question is "is it possible to use the FastEthernet Port of 861-K9 router for connecting the internet Link ?"
Cisco WAN :: Can't Enable MPLS On 6509-E
Apr 17, 2012I've got a 6509-E in the lab at the moment for some pre-deployment testing, however I don't seem to be able to enable MPLS on a select interface.
router#conf t
router(config)# interface gi1/48
router(config-if)#mpls ip
router(config)#
As you can see after I enter the "MPLS IP" command it simply backs out of interface level configuration back to global exec, and naturally the MPLS command doesn't show in configuration for that interface.
I'm running a SUP720-3BXL with WS-X6748-GE-TX line cards with the DFC upgrade (WS-F6700-3BXL).
The IOS is: s72033-adventerprisek9_wan-mz.122-33.SXI2a.bin
Cisco WAN :: MPLS On Nexus 7000?
Dec 27, 2010i wanted to know if i can and when i will be able to run the nexus 7000 as a Fully MPLS PE router (L2VPN, L3VPN etc..) ?
the interfeces need to be 10Gbps so i need to use the 8 ports & the 32 ports M1 modules.
Cisco WAN :: PA-MC-T3 - Testing Of New MPLS Link
Nov 17, 2011I have done a bunch of research in trying to re-use an old card/router for testing our new MPLS link. I have a 45m DS3 and was wondering if the PA-MC-T3= card will work UN-channelized. I have tried the "no channelized" command under the controller to no avail. I believe that the card only works for channelized T1's.
View 1 Replies View RelatedRefine Nmap Scan For MPLS Network?
Aug 10, 2011I am trying to use Nmap to determine whether a certain IP address is available or not. However, the output of the scan shows that it scanned the subnet my computer is on and only one address in the network I typed in (MPLS network). Is there any way I can have Nmap only scan that one subnet and not all the others?
View 5 Replies View RelatedCalculate Aggregate Bandwidth Of MPLS Link?
Jul 22, 2011How to calculate aggregate bandwidth of MPLS link. Is there any tool available for the same.
View 3 Replies View RelatedProtocols / Routing :: MPLS QoS To Reserve Traffic
Sep 21, 2012Before going further let me tell you I hate QoS..the policies that I applied. I am trying to create reserve traffic for a CE but when I try to download or upload the traffic goes from 2MB which is where it should stay to up to 6MB?completly losted, I will not move to ccnp sp like this.
View 2 Replies View RelatedCisco :: Enabling MPLS Forwarding Over A PE-CE Link
May 17, 2012I have few inter-AS and Hub & Spoke MPLS L3VPNs up and running but, all of them uses plain IPv4 on the PE-to-CE connecting interfaces for switching the L3VPN customer traffic. While, this is ok to route traffic between customer sites over a ISP backbone using the VRF and MP-BGP/LDP configurations which does the MPLS forwarding in the ISP backbone, i would like to know, how to enable MPLS forwarding on the PE-CE links as well to make it MPLS right from CE1 - PE1 - P - PE2 - CE2 all the way for the VPN traffic.
This way, even the last mile access to CE devices will be an MPLS link over a Ethernet PHY so that, the traffic originating from CE1 to CE 2 will be carried on a MPLS tagged Ethernet frame instead of IPoEthernet frame.
