Cisco WAN :: 7018 - Mix And Match 1 And 10 Gig Ports In Two Different VDC?
Feb 21, 2011
We have pair of Cisco Nexus 7018 with four eight port 10gig modules.I have created two VDC's with mixing 10gig ports from diffrent modules.Now we requied some one gig SFP ports and we are planning to buy 48 port 1gig sfp+ card.My question is can
1- Can I still mix and match 1gig and 10 gig ports in two different VDC's? (1-24 for VDC1 and 25-48 for VDC2)
2- All 48 port module hve to allocate to one VDC which alreday have all 10gig ports.
View 3 Replies
ADVERTISEMENT
May 5, 2011
I am trying to upgrade IOS on my Nexus7018 from version 5.12 to 5.13. I have managed on all my three out of four Nexus succesfully but one of them is keep coming with this error,
""""N1K-7018-1# install all kickstart bootflash:n7000-s1-kickstart.5.1.3.bin system bootflash:n7000-s1-kickstart.5.1.3.bin
Another install procedure may be in progress. Please try later.
how to find out which other install is running or stop any install procedure.?
View 8 Replies
View Related
Mar 9, 2011
I am running ping between two Nexus 7018 over WAN link ,and I can see some set pattern of packet drop(7.40 % drop) with MTU size 1500.When I ping between my 6500 VSS pair and same Nexus 7018 over different SP WAN link on diffrent location , I am still getting same kind of packet drop (8% drop) with MTU 1500. Has any one else come across this issue with Nexus?
View 1 Replies
View Related
May 18, 2011
I have a situation where my Internet edge routers learn 0.0 from ATT (AS 7018) my provider. I then wish to advertise these learned routes via WAN. However my WAN MPLS provider is also ATT and they use AS 7018 for that as well. When I try to push 0.0 to my other WAN sites 0.0 is suppressed to avoid loops.What's the best way to tell the WAN routers to advertise 0.0 back to the same AS originally learned from?
View 16 Replies
View Related
Oct 30, 2011
I'm going to replace a Cat6513 with a Nexus 7018. In my Cat6513, there are object tracking config as follows:
ip sla monitor 1
type echo protocol ipIcmpEcho 112.78.254.249
timeout 3000
frequency 6
ip sla monitor schedule 1 life forever start-time now
ip route 172.17.7.0 255.255.255.0 165.202.51.46 name VPN-1 track 123
Is there similar feature in Nexus platform? Because from Nx-OS command ref, I only found:
ip route ip-prefix/mask {[interface] next-hop} [preference] [tag id]
Seems can't associate a track object to a static route in Nx-OS?
View 4 Replies
View Related
Mar 4, 2013
We have a Nexus 7018 with NX OS 5.2(1), and we were trying to understand somehow the steps to do a VACL, we know that in IOS it would be:
interface GigabitEthernet9/33
description Puerto. Captura
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 19,20
[Code]...
View 2 Replies
View Related
Dec 11, 2011
how to configure QoS on the portchannels from the nexus up to the WLC 5508's?
View 1 Replies
View Related
Nov 28, 2011
I have a serious problem with nexus 7018, there're unicast flooding on one n7k, named n7k-1, which is the member of vPC domain combined with 2 N7Ks. [code]I had clean the mac-address-table, and all mac-address-tables had been synced fine, and the unicast flooding went away.
How could I fix the mac-address sync function between the modules ?
View 6 Replies
View Related
Jan 15, 2013
I've got this syslog alarm from nexus 7018. I am wondering what the slot 19 is here.
2013 Jan 15 23:59:22 r1 %PLATFORM-3-EJECTOR_STAT_CHANGED: Ejectors' status in slot 19 has changed, Top Ejector is OPEN, Bottom Ejector is CLOSE
2013 Jan 15 23:59:24 r2 %PLATFORM-3-EJECTOR_STAT_CHANGED: Ejectors' status in slot 19 has changed, Top Ejector is CLOSE, Bottom Ejector is CLOSE
View 5 Replies
View Related
Apr 3, 2012
I need to enable vPC "peer-switch" command on a pair of Nexus 7018s which are currently vPC peers (primary and secondary). The STP root and Secondary root are currently configured across these switches.Can I enable the peer-switch command in this configuration without impacting services, and then modify both switches to have the same bridge priority without impacting services ? We have a few downstream 5ks which are not dual homed to both vPC peers (work in progress) so need to understand if the peer-switch command will in any way break this connectivity for now.
View 1 Replies
View Related
Oct 26, 2011
Can I configure a DHCP Servero on the Nexus 7018?
View 2 Replies
View Related
Apr 1, 2011
If I want to use the command match protocol xxxx when configuring traffic classification for QoS, is necessary to have the following licence?
-FLASR1-FPI-RTU
-Flexible Packet Inspection RTU Feature License for Cisco ASR 1000 Series.
View 1 Replies
View Related
Feb 20, 2013
I have a problem with latest Anyconnect Mobile clients, on any device(iPhone,PC..) I have this error message.Anyconnect cannot verify the VPN serverAll certificates(rootCA,userCER) - installed on client side, all of them are trusted.
View 1 Replies
View Related
Feb 1, 2011
I'm getting an "ACL does not match proxy IDs" error that I'm not able to troubleshoot, googled this with a lot of results, tried some; but nothing applied.I have setup 2 tunnels, 1/one from a pix 515e (office) to an ASA 5505 (hosted server) for my guys to access the hosted server2/A second one from the ASA 5505 to my client's firewall so that its equipments can reach the hosted server and from the hosted server reach the equipments.Both tunnels are working fine, my issue comes when I'm trying to join my clients equipments from my office, ie cascading the tunnels.
This is the first time I'm trying to cascade some tunnels, no issues with other vpns I have been building.I'm joining the configuration of the pix and the asa and an extract of the syslogs showing the error, any obvious error I haven't seen!
View 7 Replies
View Related
Apr 18, 2005
I am currently using a Cisco 1751 w/ 1-WIC-DUS-T1 to connect our branch locations via Frame Relay. I will be adding 2 new locations in about 2 months. What is the 1800 series match for the router I currently use and is there and performance advantages?
View 2 Replies
View Related
Feb 24, 2011
This is happening to me to multiple computers on my domain. When it happens i can only log in as a local user or if I unplug the network cable, log in and then re-connect the networkThe time on all these machines is correct within at least 1 minute but still it's throwing off this error. When reading about this problem I see many fixes that all relate to how to sych the time on the PC.
View 1 Replies
View Related
Apr 17, 2011
Data link-ARP,RARP, presentation-SSL,TSL,ASCII,JPG, Session layer-ASP(apple talk session protocol),SCP are these correct?can your provide 2 new protocols for each with the long name?
View 17 Replies
View Related
Dec 19, 2011
On the laptop, the info bar is on the left side, the website tabs on the top, this shifts the other computers screenview down and to the right, it also cuts off the right side and bottom, with still leaving space on the right side and bottom. The pointer on the lap top does not line up with the desktop, because the screen is shifted, but only a portion of the screen is visible anyway. I used the same password and log in on both computers, don't know if they have to be different.There is full a screen option at the top right, but this causes the top tabs and info buttons on the left side to go black.
View 3 Replies
View Related
Feb 29, 2012
I live in a shared house, and I am the only one who has been experiencing issues connecting to the internet. I have to ask a housemate to reset the server, as this is the only thing that works.
When I am unable to connect, and I use command ipconfig, the following appears: Autoconfiguration IPv4 169.254.23.29 On the occasions when I am connected, the following appears in its place: IPv4 IP Address: 192.168.0.2
One tip that I came across was to check the box (Wireless Network properties, Connection tab) for "Connect even if the network is not broadcasting". I had hoped this simple solution would assist, but to no avail.
View 5 Replies
View Related
Nov 24, 2011
We have some ME3800MX router/switches running ME380x-UNIVERSALK9-M), Version 12.2(52)EY2. The Cisco website says:
The switch does not support these Cisco IOS router ACL-related features: # •Non-IP protocol ACLs (see Table 26-1) or bridge-group ACLs
how we would match ICMP traffic then?
View 4 Replies
View Related
Aug 24, 2012
We have an HQ site with a 2811 (w/ADVSECURITYK9-M) acting as the firewall. We currently have 1 ASA5505 that has an established ipsec l2l VPN. I'm trying to connect a 2nd ASA, but I've noticed I can only add 1 cryptomap to the outside interface. A show ver shows 1 Virtual Private Network Module... Surely that doesn't mean only 1 VPN?Do I use one crypto map, and add a second 'set peer' & 'match address' inside the crypto map itself?
View 10 Replies
View Related
Jun 13, 2012
I've Cisco7609-S with IOS 12.2(33)SRC2 met an issue is that "show ip route x.x.x.x" and "show ip cef x.x.x.x" shown next-hop is not actual switched next-hop.
For example, "show ip route 192.168.1.1" and "show ip cef 192.168.1.1" shown correct next-hop is 10.1.1.1, but the traffic destine to 192.168.1.1 actually not through 10.1.1.1, but always through the default route next-hop. Everything works normal after rebooted the router. Suppose it should caused by a bug? BTW, my Cisco7609 is runing BGP with ISP which received about 10K routes.
View 1 Replies
View Related
Feb 4, 2013
is it possible to construct the L7 HTTP class-map expression to match all URLs except one? I have 1 correct url, for example: /correcturl.* and want to redirect requests to all other possible URLs to this one, without the need to list them all in "possitive match" statements.
View 6 Replies
View Related
Mar 13, 2013
I have a 10Mbps connection link which I will like to reduce to 5Mbps on a 6509 switch as indicated in the config below. [code] After applying the service policy on the vlan interface, i got this "match vlan is not supported for this interface". I actually tried the rate limit command but I cant see the effect using the speedtest.
View 2 Replies
View Related
Mar 27, 2012
I created several rules to balance on a specific server somes apps. Everythings works great in http but no in https.In my example, i would like [URL] to be redirected to my server2 but it's always using the default rules instead of the L7CLASSSrv2. Today [URL] is well redirected. All other apps are correctly loadbalance with the stickyness effect but I can't handle the https connections.
class-map match-all L4-WEB-IP
2 match virtual-address xxxx tcp eq www
class-map match-all L4-WEBHTTPS-IP
2 match virtual-address xxxx tcp eq https
class-map type http loadbalance match-any L7CLASSSrv1
[code]....
View 4 Replies
View Related
Feb 28, 2011
I am running ASR1002 with latest XE IOS version asr1000rp1-adventerprisek9.03.02.01.S.151-1.S1.bin configuration bellow
router bgp 65000 bgp router-id 1.1.1.1 bgp log-neighbor-changes timers bgp 5 15 ! address-family ipv4 vrf LABR01-VRF bgp router-id 1.1.1.1 neighbor bgprrclient peer-group neighbor bgprrclient remote-as 65001 neighbor bgprrclient password 7 1234 neighbor bgprrclient update-source Loopback0 neighbor bgprrclient version 4 neighbor bgprrclient route-reflector-client neighbor bgprrclient route-map set_weight in I then tried to create new route-map and get error that match next-hop can not be used on inbound
route-map set_weight permit 10 match ip next-hop prefix-list thirdparty match as-path 1 set weight 1000
LAB-ASR1002(config)#route-map set_weight permit 10LAB-ASR1002(config-route-map)# match ip next-hop prefix-list thirdparty% "set_weight" used as BGP inbound route-map, nexthop match not supported% not supported match will behave as route-map with no match% "set_weight" used as BGP inbound route-map, nexthop match not supported% not supported match will behave as route-map with no match% "set_weight" used as BGP inbound route-map, nexthop match not supported% not supported match will behave as route-map with no match% "set_weight" used as BGP inbound route-map, nexthop match not supported% not supported match will behave as route-map with no match% "set_weight" used as BGP inbound route-map, nexthop match not supported% not supported match will behave as route-map with no match Not sure why Cisco is not supporting a pretty basic feature for BGP route maps.I tried looking into matching other variables but I am unable to get same result as I have same routes on bgp table from multible inbound peers.
I also get this message when configuring tacacs. I looked for "new" cli but no luck:LAB-ASR1002(config)#tacacs-server host 2.2.2.2 This cli will be deprecated soon. Use new server cli
View 1 Replies
View Related
Apr 26, 2013
i want to ask , how to match youtube in my qos, i want to give youtube the best priority in the rush hour. currently im using an acl that match the ips of youtube but i think its not sufficeitt :
View 5 Replies
View Related
Feb 1, 2012
I am setting up officeexten. I have placed the officeextend wlc in the dmz with an mgmt ip of 192.168.10.2. in the process of anchoring this to the internal wlc. Also the ip on the firewall for this interface is 192.168.10.1
1. does the mobility group need to match the same on the internal wlc ?
2. Now do i need a NAT transnational on the firewall for the external WAN ip (AP primed address say 66.10.10.10) to NAT back to 192.168.10.2 ?
3. The 5508 WLC is running on ver6.0.199.4 (license level base) - will this support office extend?
View 14 Replies
View Related
Jun 17, 2012
While on facebook I search a friend and in the search bar it says we have say 10 mutual friends however when I click this person to and view their profile it suddenly says we only have 8 mutual friends.An even stranger thing is I have a friend on facebook (she has her friend's list hidden) who will appear on MOST mutual friends lists of others I am also friends with. However she won't appear on two of my friend's mutual list when I am CERTAIN she is friends with them and also she will appear on mutual lists of some I am not friends with but also fail to appear on mutual lists of people I'm not friends with but I know she is. TO SUMMARIZE:1.) why doesn't the mutual friends number match up. it will say 10 mutual friends but show 8.2.) why does she not appear on some lists but does on others when I KNOW she should be on the others know of any scripts to just see hidden friend lists?
View 1 Replies
View Related
Jan 16, 2011
I'm trying to get an HP laptop running Win7 to see a desktop running WinXP on my network (both wired and wireless) When I run the troubleshooter in Win7, it tells me "system clock does not match local time" as the reason. I have a Belkin wireless router attached to my cable router. I have updated the system clock via the internet on the desktop and checked the time setting in BIOS. These seem to match. I have googled around on this and can't find any accounts similar. My son's Vista laptop and the Win7 laptop have seen each other since day one. The laptop and desktop did see each other at one time, but the connection was lost after I went to a hotel and changed public network settings temporarily. I can ping the desktop from the laptop, but it times out when pinging the laptop from the desktop. I'm running an avast firewall on both, but can't see a problem there.
View 6 Replies
View Related
Dec 8, 2011
we have bought 2911 router recently has to set up VOIP line seperately for the network we have two two broadband service provider:
1. how can i use 1 line as an active and other line as a failover(when 1 line is down other line should automatically bear the traffic).clear config will be useful. NATTING using MAtch address objects( roughly )
broadband service provider 1: 97.89.X.X 255.255.252.0
broadband service provider 2: 10.0.x.x 255.255.240.0
2. there are only 20 users to set up a voip line now. here we have telecom provider where they should route the traffic to make any international calls( say telecom public ip 200.200.109.110)from lan - wan everything is allowed from wan -lan we have to allow only telcom provider IP(200.200.109.110)
View 7 Replies
View Related
Jan 13, 2013
we're using openldap for authorising our user to connect to the webvpn via our ASA.We'd like to rely on operational attributes to do some DAP matching. This is an example of how a user record looks in our LDAP tree:
# extended LDIF
#
# LDAPv3
[Code]......
Are LDAP operational attributes supported at all by the Cisco ASA?
View 2 Replies
View Related
Apr 15, 2010
I have configured a lab for RA VPNs with a ASA5510 software version 8.2 and VPN Client 5 using digital certificates with Microsoft CA on a Windows 2003 server. I did the configuration based on this document from Cisco website: URL
Now the vpn works just fine, but now I need to configure different tunnel-groups so I can provide different services to different users. The problem I have now is that I don't know how to configure it so the certificate matches the tunnel-group name. If i do a debug crypto isakmp on ASA I get this error messages:
%ASA-7-713906: IP = 165.98.139.12, Trying to find group via OU...%ASA-3-713020: IP = 165.98.139.12, No Group found by matching OU(s) from ID payload: Unknown%ASA-7-713906: IP = 165.98.139.12, Trying to find group via IKE ID...%ASA-3-713020: IP = 165.98.139.12, No Group found by matching OU(s) from ID payload: Unknown%ASA-7-713906: IP = 165.98.139.12, Trying to find group via IP ADDR...%ASA-7-713906: IP = 165.98.139.12, Trying to find group via default group...%ASA-7-713906: IP = 165.98.139.12, Connection landed on tunnel_group DefaultRAGroup
So basically when using certificates I always connect the RA VPN only with the default group DefaultRAGroup. Do I need to use a different web enrollment template for certificate request instead of the user template??? How can I define the OU on the User certificate so it matches the tunnel-group???
View 3 Replies
View Related
