Auto-Configuration IPv4 Does Not Match Up
Feb 29, 2012
I live in a shared house, and I am the only one who has been experiencing issues connecting to the internet. I have to ask a housemate to reset the server, as this is the only thing that works.
When I am unable to connect, and I use command ipconfig, the following appears: Autoconfiguration IPv4 169.254.23.29 On the occasions when I am connected, the following appears in its place: IPv4 IP Address: 192.168.0.2
One tip that I came across was to check the box (Wireless Network properties, Connection tab) for "Connect even if the network is not broadcasting". I had hoped this simple solution would assist, but to no avail.
View 5 Replies
ADVERTISEMENT
Mar 30, 2012
Last two weeks, I have had a problem connecting to public hotspots. My own WiFi network is fine, but while I am connected to any public hotspot I get the 'no internet access' message on the wifi symbol.While connected to my own network, ipconfig/all shows that I have an Autoconfiguration IPv4 address in the (correct) 192 range - but when connected to a hotspot, the address is in the 169 range, or occasionally (as in the instance below) in the 10 range. Clearly this is the problem, but I cannot figure out what has caused it. Is it hardware? Software? Malware? Or user error?I have run the Wireless Test and the log results are pasted below.
Windows IP Configuration
Host Name . . . . . . . . . . . . : XPS-CLIENT-TIM
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
View 14 Replies
View Related
Dec 14, 2012
I have webcams that need port 8081 opened and I did that, everything worked fine until my DIR655 jammed up and power cycling it and the modem 3-4 times DID not make it work: no internet access and it was definitely a DIR655 problem. So, out with the paperclip to do the big reset, causing me to lose my configuration. When "most" of it came back up with my new config (I had screen prints), all was okay EXCEPT the webcams. Addresses and ports were all configured properly, address was fixed too on the client computer rather than use DHCP. I had a DNS relocation service running (DYNDNS) for the WAN side, but that address (My IP) didn't change either. I tried EVERYTHING. Finally, I realized in all my screwing around that I had enabled UPnP in my application, something I hadn't done before, but did this time as a desperation move. UPnP had always been checked off in the router. So.....I REMOVED my port forwarding and virtual server settings (either one worked before), and voila, everything working, Is this a normal occurrence, that if you have UPnP running, that this auto configuration overrides any manual configuration?
View 2 Replies
View Related
Aug 19, 2011
Newly acquired DIR-615 E3 with F/W vers. 5.10. Router configured with IPv4 static address for WAN works fine. As soon as I configure the WAN IPv6 with a static IP address also, the configuration for the IPv4 static IP is corrupted. Other combinations of (WAN config) using static for either IPv4 or IPv6 with DHCP or other seem to work. Just appears to have conflict with two WAN static IP configurations.
View 11 Replies
View Related
Mar 27, 2013
I configure safari with auto proxy configuration, insert the proxy server name, and click apply.However, if i go to network-tools.com and do a traceroute, the trace does not show the proxy serverin the series of IP address's. I have tried with several different server names but i makes no
View 1 Replies
View Related
Mar 6, 2012
Is it possible to create a job what automatically export the devices configs that are in the folder CSCOpxfiles medemushadow? It would be wonderdul if CW could export the .cfg files into a .rar and send in email or something like this.
View 1 Replies
View Related
Jun 28, 2012
I configured Auto QoS on some access ports on two 4506-E (Sup 6E-L) and I wanted to apply the same generated config on the port channel/port channel members but it didn't work.
Ex:
int gig1/3
service-policy input AutoQos-VoIP-Input-Cos-Policy
% A service-policy with non-queuing actions should be attached to the port-channel associated with this physical port.
[Code].....
View 1 Replies
View Related
Apr 15, 2012
I have a question about a netmask.How many netmask are there for IPV4?
View 5 Replies
View Related
Feb 24, 2011
This is happening to me to multiple computers on my domain. When it happens i can only log in as a local user or if I unplug the network cable, log in and then re-connect the networkThe time on all these machines is correct within at least 1 minute but still it's throwing off this error. When reading about this problem I see many fixes that all relate to how to sych the time on the PC.
View 1 Replies
View Related
Apr 17, 2011
Data link-ARP,RARP, presentation-SSL,TSL,ASCII,JPG, Session layer-ASP(apple talk session protocol),SCP are these correct?can your provide 2 new protocols for each with the long name?
View 17 Replies
View Related
Dec 19, 2011
On the laptop, the info bar is on the left side, the website tabs on the top, this shifts the other computers screenview down and to the right, it also cuts off the right side and bottom, with still leaving space on the right side and bottom. The pointer on the lap top does not line up with the desktop, because the screen is shifted, but only a portion of the screen is visible anyway. I used the same password and log in on both computers, don't know if they have to be different.There is full a screen option at the top right, but this causes the top tabs and info buttons on the left side to go black.
View 3 Replies
View Related
Feb 21, 2011
We have pair of Cisco Nexus 7018 with four eight port 10gig modules.I have created two VDC's with mixing 10gig ports from diffrent modules.Now we requied some one gig SFP ports and we are planning to buy 48 port 1gig sfp+ card.My question is can
1- Can I still mix and match 1gig and 10 gig ports in two different VDC's? (1-24 for VDC1 and 25-48 for VDC2)
2- All 48 port module hve to allocate to one VDC which alreday have all 10gig ports.
View 3 Replies
View Related
Aug 15, 2012
I understand you can't assign an IPv4 Address to a "port". But here's my issue. I have two network cables attached to a managed switch, the location of the two cables are very important. Two computers attached to the said cables.I would like to communicate with one of the computers on PORT 1 and PORT 2, regardless of what computer is plugged into them. They get there IP's via DHCP, and a static IP wont work - as the computer plugged into PORT 1 or 2 may be different.So. I have two ports on the switch that I always want to communicate with the computer on the other end. But I don't (will not) always know the IP address of the computer(s) connected.
View 12 Replies
View Related
Mar 11, 2011
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersAlex>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Alex-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
View 8 Replies
View Related
Jan 11, 2013
has quite frankly gotten me absolutely annoyed . I've tried just about everything, from using the netsh commands to changing the dns to 8.8.8.8 or that other one or the other. Nothing is working, I unplugged the router, problem persists, I disabled IPV6 problem persists, I restore, problem persists. The only clue I have is my router, and mysteriously, there are TWO of my computer on it. It might be nothing but most certainly has caught my attention. Also, it gives me this info about my media being disconnected
View 14 Replies
View Related
Jul 10, 2011
So I have been trouble shooting this for just over a day and still nothing, but anyways. My computer says that I am connected to the wireless router and that I have great signal strength but I have no internet access from either my IPv4 or IPv6. I have been using the cmd commands such as netsh reset, and the like. I have restarted both modem and router a few times as well as my computer. Also just did a recent avg scan and firewalls are all off. This is all coming from my mac laptop which is connected just fine which leaves me even more confused.
View 12 Replies
View Related
Oct 4, 2012
I have a Windows 7 computer. My boss changed the IPv4 address of this computer. Nowalthough all computers can connect to the network, they can no longer see this computer. And this computer cannot connect to the other computers.
View 1 Replies
View Related
Jun 17, 2012
While on facebook I search a friend and in the search bar it says we have say 10 mutual friends however when I click this person to and view their profile it suddenly says we only have 8 mutual friends.An even stranger thing is I have a friend on facebook (she has her friend's list hidden) who will appear on MOST mutual friends lists of others I am also friends with. However she won't appear on two of my friend's mutual list when I am CERTAIN she is friends with them and also she will appear on mutual lists of some I am not friends with but also fail to appear on mutual lists of people I'm not friends with but I know she is. TO SUMMARIZE:1.) why doesn't the mutual friends number match up. it will say 10 mutual friends but show 8.2.) why does she not appear on some lists but does on others when I KNOW she should be on the others know of any scripts to just see hidden friend lists?
View 1 Replies
View Related
Jan 16, 2011
I'm trying to get an HP laptop running Win7 to see a desktop running WinXP on my network (both wired and wireless) When I run the troubleshooter in Win7, it tells me "system clock does not match local time" as the reason. I have a Belkin wireless router attached to my cable router. I have updated the system clock via the internet on the desktop and checked the time setting in BIOS. These seem to match. I have googled around on this and can't find any accounts similar. My son's Vista laptop and the Win7 laptop have seen each other since day one. The laptop and desktop did see each other at one time, but the connection was lost after I went to a hotel and changed public network settings temporarily. I can ping the desktop from the laptop, but it times out when pinging the laptop from the desktop. I'm running an avast firewall on both, but can't see a problem there.
View 6 Replies
View Related
Apr 1, 2011
If I want to use the command match protocol xxxx when configuring traffic classification for QoS, is necessary to have the following licence?
-FLASR1-FPI-RTU
-Flexible Packet Inspection RTU Feature License for Cisco ASR 1000 Series.
View 1 Replies
View Related
Feb 20, 2013
I have a problem with latest Anyconnect Mobile clients, on any device(iPhone,PC..) I have this error message.Anyconnect cannot verify the VPN serverAll certificates(rootCA,userCER) - installed on client side, all of them are trusted.
View 1 Replies
View Related
Feb 1, 2011
I'm getting an "ACL does not match proxy IDs" error that I'm not able to troubleshoot, googled this with a lot of results, tried some; but nothing applied.I have setup 2 tunnels, 1/one from a pix 515e (office) to an ASA 5505 (hosted server) for my guys to access the hosted server2/A second one from the ASA 5505 to my client's firewall so that its equipments can reach the hosted server and from the hosted server reach the equipments.Both tunnels are working fine, my issue comes when I'm trying to join my clients equipments from my office, ie cascading the tunnels.
This is the first time I'm trying to cascade some tunnels, no issues with other vpns I have been building.I'm joining the configuration of the pix and the asa and an extract of the syslogs showing the error, any obvious error I haven't seen!
View 7 Replies
View Related
Apr 18, 2005
I am currently using a Cisco 1751 w/ 1-WIC-DUS-T1 to connect our branch locations via Frame Relay. I will be adding 2 new locations in about 2 months. What is the 1800 series match for the router I currently use and is there and performance advantages?
View 2 Replies
View Related
May 17, 2011
I am using window 7 on my laptop. I am using broadband internet (not wireless etc) via my external lan card but IPv4: IPv6: No Internet access shows.
View 4 Replies
View Related
Jan 28, 2012
Lenovo G550 with windows 7 shows that the Internet is connected but the IPv4 and IPv6 connectivity says no network access. I updated and reinstalled drivers, typed in some cmd command and restarted computer with no success. I also called tech support and they had me go into safe mode, the Internet didn't work there so he said it was a driver problem but wouldn't fix it.
View 6 Replies
View Related
Mar 16, 2012
We set up three new terminals this week at the office; they're all running Win 7 Pro 32-bit. I set them all up simultaneously (literally sat at a desk and entered the same keystrokes at each of them), so I don't see any obvious reason that one is behaving differently from the other two. The essential problem is that the terminal doesn't see the Internet.
Here are all the particulars that I think might be interesting, listed in no particular order:
- The terminal ran fine for several hours. Email access, Internet access, from 9 a.m. to 2 p.m. At that point, the user called me to show me a dialog box. I used System Restore to go back in time to 9 a.m. in case the user had somehow managed to do anything (though she's not an admin).
- IPv6 is disabled.
- The workplace uses Static IPs. The IP address is entered correctly in the IPv4 properties (x.x.x.213), but at cmd / ipconfig, I get this result: "Autoconfiguration IPv4 address: 169.254.95.187"
- In Network and Sharing Center, the network (which is only known as Unidentified Network) is set to type Public. When I reset it to type Work and reboot, it resets to type Public.
View 1 Replies
View Related
Aug 10, 2011
I have a dell inspiron 15 and I've been having trouble fully connecting to my wireless internet. It says I have signal but gets stuck on identifying the network and I have limited IPv4 and IPv6 connectivity.
Here's the ipconfig if you can identify the issue with it:
Windows IP Configuration
Host Name . . . . . . . . . . . . : M-PC
Primary Dns Suffix . . . . . . . :
[Code].....
View 11 Replies
View Related
Feb 15, 2011
my ipv4 show limited and my ipv6 also show limited when connect internet through wireless..yesteday can wep but show limited connectivity...
Windows IP Configuration
code...
View 3 Replies
View Related
Aug 19, 2012
I have Dell XPS L502X, Windows 7 Home Premium.My internet was working last night but when I turned it on this morning it would not connect.It is connected to my bt homehub with full strength but no internet access. It says IPV4 No Internet Access. I tried using a wire to connect it but that did not work either.Other devices are connecting. So can't be a problem with the internet itself. [code]
View 5 Replies
View Related
Jun 13, 2012
A few months back, my computer stopped connecting to networks. Through some process or another, I ended up "fixing" it by manually inserting the ipv4 settings. Apparently that only allows it to connect to my router though, as public wi fi won't work for it. If I leave the ipv4 settings set to automatically obtain information, the computer won't connect to the network. It will stay on the "identifying network" part indefinitely. In addition, I can't connect through the modem directly either, manual settings or not.
Here is the ipconfig while ipv4 is in auto-obtain
Windows IP Configuration
Host Name . . . . . . . . . . . . : Home
Primary Dns Suffix . . . . . . . :
[Code].....
View 14 Replies
View Related
May 10, 2013
I bought the SG300-10 Switch a few days ago and updated it to firmware 1.3.0.59, but i think there's a bug in this firmware. If I go to "IP Configuration" IPv4 Routes" in L3 Mode nothing is displayed. In the log file i see that:
21474773112013-Mar-16 09:51:34Error%HTTP_HTTPS-E-DIAGNOSTICS: ERROR - in <RL_vtLeadTableGet> tag, can not find the table rlInetRoutingDistanceTable in the MIB. 21474775182013-Mar-14 22:39:22Error%HTTP_HTTPS-E-DIAGNOSTICS: ERROR - in <RL_vtLeadTableGet> tag, can not find the table rlInetRoutingDistanceTable in the MIB., aggregated (1)
Reset of the Switch doesn't work.
View 4 Replies
View Related
May 2, 2012
I've just want to confirm if I can protect a router (telnet and ssh) putting 2 ACL's (one IPv4 and other IPv6) on the same line vty. Something like:
line vty 0 4
access-class hostsIPv4 in
ipv6 access-class hostsIPv6 in
Do I have to use named ACLs?
View 1 Replies
View Related
May 12, 2013
In my Ethernet IPv4 and IPv6 is not enabled. When I'm trying to set the IP address for my Ethernet it says it has to install the driver. Realtek PCIe Family Controller. Ethernet card.
OS: Windows 8 and BIOS v A12.
I have tried but couldn't set the IP.
View 1 Replies
View Related