Broadband :: IPv4 / IPv6 - No Internet Access
May 17, 2011I am using window 7 on my laptop. I am using broadband internet (not wireless etc) via my external lan card but IPv4: IPv6: No Internet access shows.
View 4 Replies
ADVERTISEMENT
IPv4 Connected To Internet But IPv6 No Internet Access?
Apr 22, 2011well a couple days of go it was working fine until i updated windows 7 now it says im connected to the internet but when i go on it dosnt load anything, and when i go check it says that "IPv6 connectivity: No Internet access" how ever the IPv4 is connected to the internet, should i restore settings to osmetimes earlier this week
View 2 Replies View RelatedNo Internet - Limited IPv4 And IPv6 Connection?
Aug 10, 2011I have a dell inspiron 15 and I've been having trouble fully connecting to my wireless internet. It says I have signal but gets stuck on identifying the network and I have limited IPv4 and IPv6 connectivity.
Here's the ipconfig if you can identify the issue with it:
Windows IP Configuration
Host Name . . . . . . . . . . . . : M-PC
Primary Dns Suffix . . . . . . . :
[Code].....
D-Link DIR-825 :: IpV4 Versus IpV6 Implementation For Remote Access And VPN?
May 16, 2013I currently have ipV4 as the setting on my DIR-825. Other posts seem to want ipV6 which is more secure but is not possible with a DIR-825 Rev A1. I have two routers, a primary router (DIR-825 Rev B1) capable of ipV6 and a secondary router (DIR-825 Rev A1). If I implement ipV6 on the Rev B1 router but keep ipV4 on the secondary router, will this improve the security, or will it just mess things up so nothing works?Certain devices (cell phones and most Tablets) don't deal with ipV6 very well at all. The ones I have tested flat don't connect to the wireless network if the router is set at ipV6. Is ipV4 adequate for a Home/Small Business Network when trying to implement Remote Access and VPN?
View 2 Replies View RelatedInternet Connectivity IPv4 Internet - Ipv6 - Local
May 21, 2011My laptop is not connecting to the internet, I know that it is not a router problem as my mine PC and Notebook are connecting with no issues.I have removed all router devices as had an new once once it was last working.I tried this morning to set it up again without success. I have compared to setting with my pc and have found the difference is with the IPV6 connectivity.
View 6 Replies View RelatedDNS Not Working IPV4 IPV6 Not Connected?
Jan 11, 2013has quite frankly gotten me absolutely annoyed . I've tried just about everything, from using the netsh commands to changing the dns to 8.8.8.8 or that other one or the other. Nothing is working, I unplugged the router, problem persists, I disabled IPV6 problem persists, I restore, problem persists. The only clue I have is my router, and mysteriously, there are TWO of my computer on it. It might be nothing but most certainly has caught my attention. Also, it gives me this info about my media being disconnected
View 14 Replies View RelatedCisco Security :: ACL Ipv4 And Ipv6 On Same Line Vty?
May 2, 2012I've just want to confirm if I can protect a router (telnet and ssh) putting 2 ACL's (one IPv4 and other IPv6) on the same line vty. Something like:
line vty 0 4
access-class hostsIPv4 in
ipv6 access-class hostsIPv6 in
Do I have to use named ACLs?
Routers / Switches :: IPV6 Implementation In IPV4 Network
Jul 1, 2012our company backbone is hp 5406, and desktop switches are hp 2510 currently we are working with ipv4.if we want to start use IPV6 for test environment, what’s things we need to enable in our backbone/regular switches.i mean for example if we want to set static IPV6 address for 2 servers and send ping between them, or even make new vlan with IVP6 subnet, and use it like regular vlan but with static ip's(until we got ipv6 dhcp).i have hp 5406 manual for IPV6 but i can't understand what i really need to do for start using IPV6.
View 5 Replies View RelatedD-Link DIR-615 :: Setup IPv6 In IPv4 Tunnel With Tunnerbroker Service
Mar 24, 2013Recently I wanted to setup IPv6 for my home network. I signed up for tunnelbroker.net service and was provided with IPs. Then I configured the IP address in my DIR-615. But It's not working..
Screenshot of IPv6 config (router) : Screenshot of my Win 8 network Config : I also tested at [URL] but failed...
Cisco Firewall :: 5520 - Static Mapping On ASA From IPv6 To IPv4
Dec 7, 2011ASA 5520 running 8.2
Is it possible to do static (inside,outside) with the outside address being IPv6 and the inside IPv4?
If yes, is it possible to do this in parallel with an existing static mapping that goes IPv4 to IPv4?
D-Link DIR-825 :: Firmware 2.05NA - How To Get IPv6 In IPv4 Tunnel Working
Jun 9, 2011I have a Dlink DIR-825 B1 with firmware 2.05NA. I recently reset it to factory defaults to make sure I didn't misconfigure something.
I have been struggling to get a IPv6 in IPv4 tunnel working with tunnelbroker.net. I think the issue is a problem with the router itself and i'm not sure how to get it fixed.
All of my machines were getting IPv6 addresses (both windows, mac, linux) but none of them seemed to work. All I was able to do was ping the gateway itself using the local lan address. In each case they were missing a default IPv6 route. If I added a default route then it would work.
I started looking at the packets using a network sniffer and the Router Advertisements all had a Router lifetime value of "0" which is RFC4816 speak for "don't use this router as the default router". So Windows/Linux is exactly right by not setting a default route.
The strange thing was that when I reboot the router I would briefly get a router advertisement with a lifetime of 1800s, the corrert prefix and dns server but then another router advertisement would come along 5 seconds later with a router advertisement of 0.
I have TCP' Other observations
... using 6to4 I would get working IPv6 address. The difference again seemed to be the Router Lifetime. But I want to use a permanent tunnel. I have found 6to4 unreliable.
... the router never responds to router solicitations. It only sends a router advertisement when it wants to.
... the router never responds to DHCPv6 when that is configured.
Cisco Firewall :: 3545 IPv6 Tunneling Through IPv4 - Blockage
Nov 3, 2009Would like to learn from you what tools I could use in a Network that provides IPv6 visibility and also completely blocks IPv6 from being tunneled through ipv4 only networks.
I have tested this from Linux running some internal penetration test apps,but specifically running Teredo tunneling in Local LAN that is able to completely bypass security paremeters such as websence filtering servers and be able to accessing internet IPv6 sites, even its equivalent IPv6 address based on its IPv4 PAT address could be pinged from outside.. is like the PIX firewall never existed - wide opened door .
Blocking in outbound and inbound direction udp ports 3545 and 3544 seem to done the trick in dropping IPv6 at the PIX/ASA from being tunneled out or in.. Is this so ? Realy ? not to fast!! None of our local systems - users PCs or servers have IPv6 stack enabled as a policy, however, in reality this poses a serious thread.
For example, Teredo tunneling running in a host inside LAN say by a user who is a hacker can use different UDP ports from the standard listening udp 3545/3544 ports, host will still be able to tunnel IPv6 through IPv4 again, in this case I want to have tool or a strategy that can detect this internally beside being blocked at the firewall, I am looking at AIP for our ASAs would this help? What other tools could I utilized to have some sort of IPv6 awareness in our LAN without having to rung IPv6 that can provide some visibility of this invisible traffic in IPv4 LANs.
Cisco :: Ipv6 / Ipv4 Fragmented Packet - How To Prevent It In Router Part
Jan 1, 2013i got trouble for this ipv4 & ipv6 fragment trafic prob/attack.how do i prevent it from comming in to my network? is it way to prevent it in cisco router part?
View 2 Replies View RelatedError / Ensure That Ipv4 And Ipv6 Are Selected In The Config For The Network Adapter
Aug 14, 2011I'm working on a computer that has no connectivity on wired or wireless connections. the wired eth card is a broadcom netlink card and the wireless adapter is an atheros ar5007eg. I found the drivers for the wireless on acer.com and removed the driver that was on here at first and put the one from acer. i cant find a network in range but device manager says its working fine. Then I found out the wired connection isnt working either and im getting the same messages from windows troubleshooter. It says both are "experiencing driver or hardware related issues and "make sure your internet protocol bindings are correct - ensure that ipv4 and ipv6 are selected in the config for the network adapter". it links me to the connection properties and ipv4 and ipv6 are checked off for both. futhermore, in the connection status window it says i have no ipv4 or ipv6 connectivity.
View 6 Replies View RelatedLinksys Wireless Router :: EA4500 Loses IPv4 And IPv6 Information?
Dec 21, 2012No changes made but router will lose all information for IPv connectivity. I have paid twice to support to fix this issue and it still occurs every few months. I tried rebooting router, and doing an IP Release/ Renew and router does not get IP address.
View 4 Replies View RelatedLinksys Wireless Router :: EA4500 - Translate Ipv4 Address And Port To Ipv6?
Nov 9, 2012I have a virtual machine running in my desktop which connected on the gigabit lan port on EA4500 with firmware 2.0.37.What I want to be able to do forward a port that came from an external ipv4 address to the ipv6 address and a different port to my virtual machine (to remote desktop port 3389).The reason I want to convert the traffic to ipv6 is because virtual machine is running vpn and is not reacheable through ipv4 (unless bunch of routes are setup and things get complicated etc). I verified my phsical server and virtual server get both ipv6 ip addresses through ipv6 tunnel from comcast. Without tunneling I could not get ipv6 setup using automatic mode with comcast, it simply did not work for some reason.
View 1 Replies View RelatedIPV4 Connectivity But No Internet Access
Mar 11, 2011Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersAlex>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Alex-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
Dell XPS L502X - IPv4 No Internet Access
Aug 19, 2012I have Dell XPS L502X, Windows 7 Home Premium.My internet was working last night but when I turned it on this morning it would not connect.It is connected to my bt homehub with full strength but no internet access. It says IPV4 No Internet Access. I tried using a wire to connect it but that did not work either.Other devices are connecting. So can't be a problem with the internet itself. [code]
View 5 Replies View RelatedCan Pure IPv6 Host Ping A IPv4 Host?
Feb 10, 2011I'm just wondering if its possible to ping an IPv4 host using the IPv6 host assuming that the NAT64 has already been implemented?
[code]...
Linksys Wireless Router :: E4200v2 Cannot Access IPv6 Internet Or Sites?
Feb 5, 2012I just upgraded my old WRT54G to a E4200v2 with firmware 2.0.36.126507. I installed it using the Cisco Connect CD. At first it seemed OK, but then I noted that I cannot open (or takes forever) many websites, in particular those requiring Adobe Flash Player to view. In addition, it appears that access IPv6 Internet or sites is impossible, even though IPv6 is enabled in the GUI. Is there anything I am missing in the configuration/set up of the router?
View 9 Replies View RelatedBroadband :: Internet Access Not Available
Feb 21, 2011Im unable to use internet.My modem shows that it is connected but i kept on getting "Local Area Connection" doesn't have a valid IP configuration when i tried troubleshooting.
Windows IP ConfigurationHost Name . . . . . . . . . . . . : Jesmin-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
[code]....
Broadband :: No Internet Access
Aug 26, 2011Email OK but no Int't accessHave tried updating from WindowsXP CD but I still have no communication with my router when I move to Internet Explorer
View 16 Replies View RelatedBroadband :: New PC's Internet Access Won't Work?
Aug 22, 2012I have two PCs with the same problem. The ethernet port on the motherboard does not recognize an Internet connection. I'm running Win 7 64 bit Pro on both. My older PC needs to have the enternet cable disconnected before Windows boots, then once the OS is all booted, I plug the ethernet cable back in and I get an internet connection. On my new PC, I had to go into Device Manager and delete the ethernet card ( not the drivers) then reboot. Windows then recognized the card and connection and the Internet works. What is causing this? One PC is an Intel I-7 quad core, the new one is an Intel I-7 six core. Both hardwired to the Belkin N router. My old XP PCs do not have this problem.
View 2 Replies View RelatedBroadband :: No Internet Access - Cannot Ping DNS
Apr 17, 2011I was able to go onto the internet with no problem. I've been searching forums trying to solve my problem but to no avail. I have Windows XP installed, I can connect to the LAN network but I cannot go online. I can ping the gateway but not the DNS as well as other address name or ip address. This is the output of ipconfig /all:
Description : Realtek RTL8139/810x Family Fast Ethernet NIC
Dhcp Enabled : Yes
Autoconfiguration enabled: Yes
IP address: 192.168.1.145
Subnet mask: 255.255.255.0
Default Gateway : 192.168.1.1
DHCP Server : 192.168.1.1
DNS Servers : 202.160.8.2
202.160.6.20P.s: All the other computers in the LAN can connect to the internet.
Broadband :: Cannot Access Internet And Network With Any Program
Mar 9, 2012I have two windows.Windows XP and seven.My Windows XP cant connect to the internet.I was downloading a file With IE when my ISP experienced problems and my internet was shut down.Internet explorer was not responding and finally crashed my whole computer.from then on no programs like IE ,Google Chrome , Firefox or even VPN and Dial-up connections can get me connected to the internet. I installed windows seven and internet works fine there but MANY of my programs are on the xp and i'm more familiar with that windows. How to connect that to the internet? [code]
View 3 Replies View RelatedBroadband :: Limited Internet Access At Office?
Mar 10, 2011i got one thing im in my office we have limited inter net acess but people are using much so i want to control the net. once only office hour
View 1 Replies View RelatedBroadband :: My Internet Access Drops Frequently
Feb 29, 2012The Internet access starts very slowly and then keeps dropping. My Internet connection is 3G and I get good signal strength but the Internet does not connect. I am using Windows 7 Ultimate OS. Ram is 4 GB
View 2 Replies View RelatedBroadband :: Network Works Fine But Cannot Access Internet
Mar 1, 2011connect new computer running windows 7 to small peer to peer network...modem to connect to interenet is speadstream 5660...network works fine but cannot access internet...i works great in my office with a different modem...i can access the windows 7 computer remotely using go to assist also...trying to find out if there are issues with windows 7 and the speedstream 5660 modem...
View 2 Replies View RelatedBroadband :: Can't Access Internet On Acer Aspire 6920
Feb 17, 2011I have owned my Acer Aspire 6920 for about a year. Today, it will not access the internet on our wireless setup. The other computers in the house aren't having a problem getting on the web. This has happened once before, but I can't remember exactly how I fixed it at that time, naturally. The blinking light on the right side of the keyboard that indicates the network adaptor and modem are working isn't blinking today. It is a solid light. I have tried rebooting, shutting down for a while, etc., with no luck.
View 1 Replies View RelatedPrompted / Connected To Mobile Broadband But Can't Access Internet
Aug 16, 2011i can be prompted or connected through my mobile broadband connection but i can't access to the internet,what's wrong?...is it some settings?
View 1 Replies View RelatedConnected To (Linksys Broadband Wireless-B BEFW11S4) Router But Cannot Access Internet
Jul 26, 2012I have am unable to access the Internet via my modem and router. My computer recognized the connection from my router. My modem is a Motorola 12DVC. My router is a Linksys Broadband Wireless-B BEFW11S4 version 4. I tried several things, including changes via 192.168.1.1. I am using an AT&T DSL connection. The router has only been used one time.
Here is some other information:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsJim>ipconfig /all
[Code].....
Cisco WAN :: Configure 861 Router For Simple Internet Access Using Broadband Connection
Mar 20, 2013i am trying to configure Cisco 861 router for simple internet access using my broadband connection. despite of all my efforts, I am not able to browse any site from my directly connected PC having IP address 192.168.1.254/24. but I can ping all internet destinations from router prompt. I believe, I am having problem in NAT becuase I do not see any stats or translations. I have attached the output of running configuration, sh version, sh ip nat stat, sh ip nat trans and sh ip route.
View 8 Replies View RelatedDell :: Vostro 3360 - Hotspot Station Software / Ipv4 Showing No Internet Connect
Jun 16, 2013I am using the Vostro 3360 with win 7, I did used the hotspot station software accomplish with the WiFi driver before and worked fine. However, the hotspot is not working as the ipv4 is showing 'no internet connect'. And my iPhone cannot connect it too.
View 1 Replies View Related