Cisco WAN :: 881 To Use Ntp As Feature
Jul 28, 2011I can see that the Cisco 881 does not have NTP as standard, but can this feature be used anyway with the latest software upgrade ?
View 1 Replies
ADVERTISEMENT
OTT Feature On A Set Top Box
Jul 19, 2012I am attempting to send net and IPTV multicast to an Entone STB. This STB has some OTT features such as Vudu that need internet access. The DHCP address that we receive from our ISP strictly sends multicast streams to the STB.The first challenge is allowing DHCP options to pass through to the STB.Then I need to figure out a way to pass both the net and multicast to the STB.
View 3 Replies View RelatedCisco WAN :: 891 To Get The History Feature
Jun 5, 2013I'm running a cisco 891 with ios Version 15.2(4)M3 ,now I have a dialer 0 interface with fast0 and 1 as well, all is working fine.now I just read about the new sh int 'INT' history feature but when I do it I get nothing.. not a graph or anything I get just nothing as if I just hit enter.anything I need to do to enable the feature?,if I do a sho proc cpu history that works just fine but not the sh int XYZ history commands
View 2 Replies View RelatedCisco WAN :: 881 To Use Ntp As Standard Feature
Nov 25, 2012I can see that the Cisco 881 does not have NTP as standard, but can this feature be used anyway with the latest software upgrade?
View 4 Replies View RelatedCisco :: EEM Feature In 3560G?
Sep 11, 2011I have cisco 3560G with C3560 Software (C3560-IPSERVICESK9-M), Version 12.2(53)SE1 Image. I want to configure it for EEM feature so that when my Gig 0/7 port goes on it will automatically shutdown the port Gig 0/1.
MPLS_WAN_NET#show event manager versionEmbedded Event Manager Version 3.20Component Versions:eem: (v320_throttle)2.1.50eem-gold: (v320_throttle)1.0.4eem-call-home: (v320_throttle)1.0.4Event
[Code]....
Cisco Firewall :: NAT-Control Feature In ASA 8.4 (2)?
Aug 26, 2011I'm a bit confused about new NAT functionality in Ver 8.4(2). I've gone through all the documentation as well as different blogs but still not clear about the various things.One of these is NAT-CONTROL. I understand that this has now been removed. Does this means that traffic traversing the ASA doesn't need any NAT'ing commands unless specifically required by the administrator? In other words by default traffic is allowed through the firewall without any NAT'ing.
My Second Query
I've ASA5520 running ver 8.4(2). For inside interface, I've created 13 x sub-interfaces under Gi0/1. All have same security level i.e. 100. What I want to achieve is that:Traffic from these sub-interfaces should be NATTed to outside interface when going to internetBut, intra sub-interface traffic should be allowed without NAT'ing. I'm using RFC1918 on both sides i.e. source / destination The first point is not a problem it's working, however. I'm struggling with the second point. On ver 8.2, it wasn't a problem, I used NAT 0 with access-list permitting RFC1918 addresses as source and destination.
Cisco Firewall :: Name Feature On ASA5550 8.4
Feb 16, 2012I have upgraded ASA5550 version from 7.2(4) to 8.4(2).
On version 7, I am used to "names" command, like this:
names
name 107.25.1.10 Picard
name 107.25.2.20 Administrativa
By addition, when configuring acls it was very usefull, for example:
access-list inside_access_out line 15 extended permit udp host Picard host 107.25.4.61 eq snmp
On version 8, I have verified that names replacement is no more available:
ASA(config)# access-list outside_access_in permit ip host ?
configure mode commands/options:
A.B.C.D Source host IP address
Cisco WAN :: ASR 1006 - IRB Feature Is Not Supported
Sep 9, 2011My problem with ASR 1006 as i tried to use the feature IRB ( integrated routing and bridging ) but i find that this feature is not supported i assume it may be a problem with IOS version or may be i made he configuration not in the proper way
so i am asking to try this feature on ASR 1000 series and work with it as I test this feature on other routers and it work just fine.
DLink Dir-632 IP Filtering Feature
Sep 19, 2011I've a new Dlink DIR-632. All ports snif from outside are answering stealth by default. And the port forwarding feature works good.The problem is that I would like to allow a trusted net IP to reach my computer, whatever the request may be (whatever tcp/udp and on any ports). A kind of DMZ just for a precise IP. I tried the inbound filter feature. I've choosen allow, and I've put the remote IP start and end the same IP. It has been added correctly to the list. However, this IP still doesn't seem to be able to access to my computer on any port unless it tries on an already forwarded port.
View 1 Replies View RelatedCisco :: CUCM Feature Ring Like CUCME
May 28, 2012I've looked in many places but cannot see how or if it is possible to configure a phone, in CUCM to have a feature ring instead of the normal ring.In CUCME you go into the ephone x configuration mode, and assign the DN to the phone with the button xfx command. What this gives you is a slightly different ring tone when a call comes through. If I am not mistaken it is the same ringtone they use on the show "24".Is there a way to do this "feature" with CUCM?
View 1 Replies View RelatedCisco Routers :: RV042 V3 Web Filter Feature?
Jan 10, 2012We are currently installing RV-042 V3 Dual WAN VPN Routers for a Customer with an HQ Office & 3 Branch Offices. The Customer recently requested to use the WEB Filter feature available in the RV-042 V3 Router to do the followng : - " Block all the HTTP Traffic Except for the company Website " We tried all the Combinations between " Access Rules " & " Content Filtering " available under the " Firewall " but we always reach the result that either to Allow ALL HTTP Tarffic to All Websites or to Block ALL HTTP Traffic.
how to Block all HTTP Traffic except for certain URL ( Using the URL Name NOT the IP Address ).
Cisco Wireless :: WAP321 E K9 Will Support WMM Feature Or Not
May 7, 2013We need U-APSD (a special WMM Feature).Does the WAP321-E-K9 Support this feature?We need it for powersave mode from cordless wlan phones.
View 1 Replies View RelatedCisco :: 6500 VSS Unable To Manage Vss Feature
Mar 27, 2013We have 6500 chassises in our set up. But using CWLMS 4.0 , we are unable to manage VSS feature of 6500.Also User tracking for Nexus 7K Switches subnets are not working.
View 1 Replies View RelatedCisco LAN :: 3560 To Use IP Address Helper Feature
Mar 5, 2012I would like to use the ip address-helper feature of my 3560 switch to point 10.1.0.0/24 to my Windows DHCP Server on 10.0.0.0/24 and I am unsure how to go about doing this.
View 2 Replies View RelatedCisco Firewall :: Active IPS Feature In ASA5500-X?
May 5, 2013Should we active IPS feature in ASA 5500-x by useing license?in the 5500-x ordering guide:IPS is only sold as ASA-IPS combo SKUs i.e., one cannot add IPS service as an option on top of ASA SKU. For example, if IPS service is desired on ASA 5515-X appliance, the relevant SKU is ASA5515-IPS-K8 or ASA5515-IPS-K9.But my customer has actived it by using the ASA5525-IPS-SSP on ASA5525-K9.
View 2 Replies View RelatedCisco Firewall :: ASA 5520 Dual ISP Feature
May 31, 2013I would like to knwo if i have dual ISP feature with my ASA 5520 licence? With ASA 5505 i can see Dual ISP feature but with ASA 5520 it's not!
View 3 Replies View RelatedCisco Wireless :: Purpose Of Remote LAN Feature In 7.0.116.0?
Jul 28, 2011I have a remote site that has an AP running in H-REAP mode which connects over our MPLS cloud to a WLC, which has one interface on the "inside" network and one on our DMZ. The remote AP in H-REAP mode currently only runs our Guest SSID, but now I need to established an isolated VLAN.
Two of the hosts on this isolated VLAN, which is need to support some conference room devices, need to run on wireless and communicate with two devices on the same VLAN that are hard-wired to the switch.
Getting the wireless devices to connect remotely is easy enough by setting up an SSID that uses an IP subnet which one of the WLC's interfaces actually connects to...but can I do that for a completely remote IP subnet (i.e. one that the WLC does NOT physically connect to?). I'm not sure and I'm wondering whether that's the purpose of the "Remote LAN" feature...which is a very new feature.
Cisco VPN :: SSL Feature License On 1941 Not Deployed
Jul 18, 2011I have recently purchased 2 x 1941 routers with 2 L-SL-19-SEC-K9= and 2 L-FL-SSLVPN10-K9= licenses. I've installed the licenses through Cisco Configuration Pro ver 2.5 and installation did not generate any errors. After saving config and reloading the device, on the License dashboard, the deploy status for the SSL VPN is "Not deployed" and I have no way of deploying it. The state also says "Active, Not in use". I have tried reinstalling the license via command line but get error "license duplicate - already installed" suggesting the installation was OK. The sec license deployed without any issues. Is there any way to manually deploy this SSL_VPN license?
View 4 Replies View RelatedCisco WAN :: 3945 Router IOS For VoFR Feature?
May 18, 20113945 Router IOS Required for support VoFR Feature
View 1 Replies View RelatedCisco Firewall :: ASA5505 Use Web Filtering Feature
Nov 16, 2011i am going to implement a ASA5505 in one of my offices. I would like to use web filtering feature on it. Will it cause any performance degradation in ASA? will it utilized more memory?
View 1 Replies View RelatedCisco Switching/Routing :: 3750X Did Not Have NAT Feature
May 22, 2013I have a query regarding attached Network Design
PC---2960---3750(One Routed Port and All Switched Port)------------------------ 3750(One Routed Port and All Switched Port)-----2960------Internet
I have many Vlans on left side of image , Right Side of Image is having internet connection via Modem, and local connectivity between VLAN works fine but Other Vlans Except Vlan1 is able to Access Internet.Note that 3750X did not have NAT Feature ,How should I able to get Internet on Other Vlans (10,20)
Cisco WAN :: 1841 / Router ISP Failover Feature - IP SLA
Feb 13, 2012I got a simple office: one flat LAN, one single 1841 router and 2 ISPs.LAN is 10.10.20.0/24 and is connected to a port on an HWIC card I installed in the 1841. Then FA0/0 connects to ISP1 and FA0/1 connects to ISP2.
Everything is fine except that I am having some issues with the Failover feature. Currently, I am using Object Tracking with SLAs. I am pinging 2 hosts located on the internet and then I have an SLA OR statement which basically say if ANY of the 2 objects are unreachable, DO NOT trigger a failover to ISP2. If in the case that BOTH objects become unreachable, then DO trigger a failover. It works like a charm.
The problems:Any internet hiccup obviously makes the router activate the tracks and redirects all traffic to ISP2. However, 99% of the time ISP1 is back online within minutes or seconds, so after 180 seconds the traffic gets redirected back to ISP1. So in essence, the customer suffers 2 interruptions.
Besides internet hiccups, I have also noticed that every time any user tries to copy a big file accross the tunnel (the 1841 has site to site tunnels with 2 branches) the tracks go crazy and the objects become unreachable so a failover is triggered. We were breaking our heads and fighting with the ISP1 provider because every time this happened, we called them but every time they kept telling us that their line was UP and running without any problems. So after careful investigation, I do admit they were right.... it is not so much that the ISP1 experiences hiccups, it is actually the fact that users putting heavy load into the router are causing it to have its track to stop reaching the objects.
Cisco Wireless :: Planned AP Association Feature In WCS 7.0.164.0?
Dec 6, 2010Has used the "Planned AP association" feature in WCS 7 planning mode? I haven't been able to find any documentation on it, but I was hoping that it allowed you to map your planning AP's and locations to freshly deployed AP's and place them on the floorplan when doing a synchronize, but I can't get it to complete successfully.
View 3 Replies View RelatedCisco WAN :: 3945 Vs 3945E From VPN Feature Perspective
Jan 20, 2013I have an issue understanding the difference between 3945 and 3945E from VPN support perspective.
If you check this link here:
[URL]
You will see that the 3945E doesn't even have an ISM slot for a VPN ISM module and of course I could not find any ISM module for 3945E (I think this is obvious). Nevertheless, the above mentioned page and
[URL]
say "Embedded hardware-accelerated VPN encryption for secure connectivity" for 3945E
That the Cisco 3945E supports the same VPN features (including packet encryption / decryption in hardware) like a Cisco 3945 with VPN ISM card?
Cisco WAN :: 2651XM - NAT Feature Set / Can IP-BASE Be Used On Router
Apr 17, 2012I have Cisco 2651XM and currently running old IOS c2600-is-mz.123-26.bin (IP PLUS) which I used the NAT protocol. I was wondering can I use IP-BASE on this router and I am not sure if this feature set has NAT protocol.
View 1 Replies View RelatedCisco :: To Use MBSSID On 851W Feature Navigator
Feb 3, 2011I have looked at the Cisco Feature Navigator and according to the output with IOS 12.4(15)T1 thru T13 there is support for multiple SSID's and the feature "Multiple Basic Service Set ID" should be supported.
When I try to invoke that command mbssid on my Dot11 interface I get 'Invalid' response. Am I missing something here? Is the Feature Navigator misleading me or am I doing something wrong?
All I want to do is broadcast both SSID's that I currently have configured. Currently only one guest mode SSID is allowed and broadcast.
Does Modem Have An Integrated Routing Feature
Mar 12, 2011What I am trying to do is port forward certain ports so the servers I'm trying to run will allow other people to connect.So far I got no where since I got a new ISP. They can't provide any assistance since I use a netgear router. One of their tech support said their modem has a built in router. The rest all said no. I noticed that the IP in CMD when I type ipconfig /all is 192.168.1.(15-47) it switches every now and then. But that is a local IP. Wouldn't that single that the modem is already routing the IP? When I put my router on it switches to 10.0.0.(2-55). These are all local IP's though. Does the modem have an integrated routing feature? Verizon really sucks so far. They can't answer their own questions without conflicting with each other.
The modem is getting the IP, and putting it into a local IP (What I believe is a routing feature) for the network. Now the local IP goes to the netgear wireless router, and gets routed again (Changed the local IP to 10.0.0.?). The netgear only got a Local IP the first time however, so the external IP is not being... worked with in the netgear router. It is trying to port forward for the local IP address, which already works for me obviously, however it is not a WAN IP address and therefore no one else is able to connect to any of my servers.And lastly, verizon states they have only "Modems" and "Wireless routers" so if they have no modems that doesn't come with this feature, then I need to learn how to port forward while the IP is being routed twice, similarly to when you have two routers hooked into each other.
D-Link DIR-655 :: Is Guest Network Feature Available In 1.2x FW
Apr 16, 2011I've been fighting the Rev A4 HW and 1.3x firmware stability issues. I would like to try the 1.21 firmware, but I use the guest network feature. The unofficial backrev'in instruction look to be a PITA... and I just would like make sure the guest network feature exists in the 1.2x firmware before I got through the trouble.
View 2 Replies View RelatedCisco Switching/Routing :: 3750X IP Base IOS Feature Set?
Oct 26, 2011I have been looking to find out the list of features that the IP Base IOS has for the 3750X series switch. What would be ideal is a comparable list but essentially I need to know which of the LAN Base/IP Base/IP Services has SSH functionality.
View 1 Replies View RelatedCisco Switching/Routing :: 3750x 12.2-55.SE3 IP Base Feature Set?
Sep 9, 2012Full feature set for IP Base with the 3750x.I just wanted to verify that I could create a routed port, turn ip routing on, and create static routes as well as a default route. From what I can find, there shouldn't be a problem with this on the IP Base Feature Set, I just wanted to verify. Or any link for the Features of IP Base on the 3750x.
View 3 Replies View RelatedCisco Switches :: Power Save Feature Of SG 102-24 Can Be Disabled
Jul 17, 2011Does the power save feature of the SG 102-24 can be disabled somehow ? Our college just purchased 24 of these switches. We are having a problem with the switches affecting some of our monitoring software (Vision from Nettop).Basically, the client pc's become invisible to the master station. I believe this is due to the ports doing an automatic shutoff.I know these switches are unmanaged, but I'm hoping they at least have some form of configurability. Right now our only option is to have an instructor cycle the power of the switch to get the client pc's visible again.
View 3 Replies View RelatedCisco WAN :: 2851 Router Auto Mdix Feature
Jan 30, 2013I'm just wondering if there is any documentation that confirms if the 2 built-in Gigabit ports on a Cisco 2851 router support (or otherwise) auto-mdix.I can find information for the modules but not the 2 built-in ports.
View 3 Replies View RelatedCisco WAN :: 3560X Not Found RSTP Feature In Switch
Apr 6, 2012My entire switching network is enabled RSTP and I have purchased a new cisco 3560X series switch and I have not found RSTP feature in my switch.Is it available if I change the image? will cisco switches supports RSTP?
View 1 Replies View Related