Cisco WAN :: 3945 Vs 3945E From VPN Feature Perspective
Jan 20, 2013
I have an issue understanding the difference between 3945 and 3945E from VPN support perspective.
If you check this link here:
[URL]
You will see that the 3945E doesn't even have an ISM slot for a VPN ISM module and of course I could not find any ISM module for 3945E (I think this is obvious). Nevertheless, the above mentioned page and
[URL]
say "Embedded hardware-accelerated VPN encryption for secure connectivity" for 3945E
That the Cisco 3945E supports the same VPN features (including packet encryption / decryption in hardware) like a Cisco 3945 with VPN ISM card?
View 1 Replies
ADVERTISEMENT
May 18, 2011
3945 Router IOS Required for support VoFR Feature
View 1 Replies
View Related
Sep 28, 2011
Does following configuration is responding to the request of my client asking for 20 T1/E1 connections on a Secure ISR 3945E, by combining on the same router One (01) NM-8CE1T1-PRI card and Three (03) HWIC-4T1/E1 cards.
Here are the router configuration:
CISCO3945E-SEC/K9 Cisco 3945E Security Bundle w/SEC license PAK
MEM-3900-1GU2GB 1GB to 2GB DRAM Upgrade (1GB+1GB) for Cisco 3925/3945 ISR
MEM-CF-256U1GB 256MB to 1GB Compact Flash Upgrade for Cisco 1900,2900,3900
NM-8CE1T1-PRI 8 port channelized T1/E1 and PRI network module
HWIC-4T1/E1 4 port clear channel T1/E1 HWIC
SM-NM-ADPTR Network Module Adapter for SM Slot on Cisco 2900, 3900 ISR
PWR-3900-AC/2 Cisco 3925/3945 AC Power Supply (Secondary PS)
CAB-ACE AC Power Cord (Europe), C13, CEE 7, 1.5M
S39EUK9-15104M Cisco 3925-3945 SPE IOS UNIVERSAL
PWR-3900-AC Cisco 3925/3945 AC Power Supply
3900-FANASSY Cisco 3925/3945 Fan Assembly (Bezel included)
C3900-SPE250/K9 Cisco Services Performance Engine 250 for Cisco 3945 ISR
ISR-CCP-EXP Cisco Config Pro Express on Router Flash
SL-39-IPB-K9 IP Base License for Cisco 3925/3945
SL-39-SEC-K9 Security License for Cisco 3900 Series
View 1 Replies
View Related
Dec 13, 2012
I have a NAT setup. Some of my udp packets are dropping. How to find more about the NAT to find whether it missed anything or not. the router is 3945e. [code]
View 3 Replies
View Related
Mar 31, 2013
Can Cisco 3945E support VRF-Lite ?
View 4 Replies
View Related
Oct 23, 2012
the feature difference between Cisco 7204vxr vs 3945E.
Wanted to know the limitation in 3945E compared to 7204VXR
Features39457204VXR with G2MemoryPacket processingBandwidth support
View 1 Replies
View Related
Dec 16, 2011
I have inherited a 3945E router with an NM-8CE1T1-PRI card installed in slot 2 using the SM-NM adapter card. The command 'card type E1 2' has been issued but I only see interfaces Serial2/0:0 to Serial2/0:30.
Since it as 8 port card I was also expecting there to be
Serial2/1:0 to Serial2/1:30
Serial2/2:0 to Serial2/2:30
etc etc.......
Serial2/7:0 to Serial2/7:30
The router will not allow me to issue a sub slot number with the card type command.
Am I missing something in the configuration or is there an issue with this card and router combination? The show inventory has the following:
NAME: "Network Module Adapter for SM Slot on Slot 2", DESCR: "Network Module Adapter for SM Slot"
PID: SM-NM-ADPTR , VID: V01, SN: FOCxxxxxxxx
NAME: "8 port channelized and PRI T1/E1 NM on Slot 2", DESCR: "8 port channelized and PRI T1/E1 NM"
PID: NM-8CE1T1-PRI , VID: V01 , SN: FOCxxxxxxxx
It doesn't give any errors when booting up and the router is running c3900e-universalk9-mz.SPA.152-1.T.bin IOS.
View 2 Replies
View Related
May 29, 2013
I was looking for Rack Unit required for 7206 VXR & 3945E but couldn't find it.
View 1 Replies
View Related
Jan 8, 2011
Am looking at purchasing a router that is capable of serving a WAN bearer at up to 1Gbps. The 3945E has had good reviews as a high throughput router but the datasheets suggests performance of 350Mbps. It also states that additional performance can be ensured by adding SPE modules. Whether the 3945E could achieve up to 1Gbps with SPE modules?
If the 3945E can't achieve such performance, The key features I am after are:
IPV4 and IPV6 support
L2tpV3 support
BGP
IP SLA
1Gb Copper Connections on-board with capability of at least 4 Ports
View 2 Replies
View Related
Nov 15, 2011
I'm looking to use a Cisco 3945E to terminate a 1Gbps Ethernet internet connection and I want to know the realistic throughput that I can expect. The router will only be configured with BGP with partial routes. No firewall or QoS will be configured.
View 8 Replies
View Related
May 30, 2013
I'm trying to migrate the running-config from our old 3725 router to our new 3945e router. Almost all of the config is copied over except for a few lines that come up as unrecongnized commands. So it looks like these commands were either removed or changed to something new.
View 12 Replies
View Related
Dec 1, 2011
I have a question concerning about how many ospf and bgp route entries does 3945E isr g2 router support?
View 6 Replies
View Related
Sep 11, 2011
I am wondering if IOS bundled by default with CISCO3945E-SEC/K9 and CISCO2911-SEC/K9 contains adv. ip services features (like Eigrp, OSPF etc.).
View 1 Replies
View Related
Jan 19, 2012
what this syslog message means? Being getting this on my 3945e series routers. My gut tells me they are caused by our Security guys scanning my routers with invalid login attempts.
%SSH-3-DH_RANGE_FAIL: Client DH key range mismatch with maximum configured DH key on server
View 1 Replies
View Related
Jun 24, 2012
I am using 3945E Router as Easy VPN Server, with 15.1 IOS. On router I have bunch on usernames for VPN authentication, I want to restrict Router management access for them(ssh,telnet, http and so on).
View 2 Replies
View Related
Jul 15, 2012
I'm trying wrap my head around bandwidth guarantee for nested maps. I tried adding a new class to two of my policy-maps today, and got this error: 3945E-1(config-pmap-c)#bandwidth 3000 Insufficient bandwidth 3000 kbps for the bandwidth guarantee
I'm not sure how it knows that with the nested maps and how it's computed. I have a 100mb WAN connectin going to 19 branches. I have a class-map that identifies traffic to the individual branch and within that class, a policy-map is applied to prioritize voice over video etc.
Here's the QoS setup:
class-map Branch1-Policy
match access-group branch-1-acl
*
*
[code]....
I was adding the Video-Conf class to both Traffic-6calls and Traffic-10calls when I got the above error. How would that percentage be calculated? I know by default i can only reserve up to 75% of interface bandwidth. The platform is 3945E running 15.1(3)
View 1 Replies
View Related
Feb 12, 2012
i want to create a trunk between 4507 & 3945E router & route two vlans from router 3945E
4507# vlan 99 & 51
# int vlan 99
# ip add 10.22.100.1/24
#int vlan 51
# ip add 10.22.103.1/24
[code].....
4507 version : IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.02.00.SG RELEASE SOFTWARE (fc4)
3945E: 15.1(2)T4 what I am missing?
View 3 Replies
View Related
Nov 8, 2012
I am trying to find out what the 'normal' operating temperature of the CPU in a 3945 router is? We have just replaced some 2800 routers for 3945's and the NMS server initially complained about the new router CPU temperature being too high. Compared to the 2800 the CPU temperature is much hotter - 50 degrees celcius as opposed to 20-smothing degrees. I have searched but can't find what are considered 'normal'?
This is the output:
router#sho environment allSYSTEM POWER SUPPLY STATUS==========================Internal Power Supply 1 Type: DCInternal Power Supply 1 12V Output Status: Normal
[Code].....
View 3 Replies
View Related
Mar 3, 2013
We have recentrly replaced a 1700 router with Cisco 3945 router (Core Router) and the Channalised E1 interface is configured as given below: [code]
The issue happens intermittenly and makes network not reahable.Status of the links are UP/UP - No traffic forwarded through the link (Ser 0/0/0:1 and Ser 0/0/0:2) and at the same time not able to ping the local IP Address as well - 10.5.10.1/10.7.10.1.No issue on the Ser 0/0/0:0 link - Working fine.If you replace the new router with the old one all are working fine.
View 1 Replies
View Related
Apr 12, 2013
Our company have purchase new cisco 3945 and install SM ES3G-24-P.
Etherswitch already configure and can access service module. But assigned VLAN in a port and and ping the host connected on is RTO from the router.
Do i need to upgrade the IOS of the chassis so that the SM installed be detect as ordinary GE port?
View 1 Replies
View Related
Jan 7, 2013
How to find the maximum number of PRIs supported on a given router:
Let's say I need to find maximum number of PRIs I can connect on a C3945.
I see that I could buy for example (4) VWIC3-4MFT-T1/E1. The C3945 comes with (4) EHWICs where such VWIC3-4MFT-T1/E1 cards can be inserted. Since each VWIC3 has (4) ports each, that would be total of 16 PRIs.
Then let's say I want to put more Service Modules and allow me to expand it further. The C3945 can support up to (4) service modules.
If I want to put the maximum number of PRIs possible, is it right I could install (4) NM-8CE1T1-PRI. That would give me maximum of 48 PRIs in a C3945.
View 1 Replies
View Related
Dec 27, 2011
I wanted to confirm if the NM-2W is compatible with 3845 (says it is compatible) and 3945.I wanted increase WIC density in these routers to install ISDN HWIC-4B-S/T 4-port ISDN BRI High-Speed WAN Interface Card.However, i am not sure if these cards are compatible on the NM-2W. Is there any other NM* module that can extend WIC density on those routers.
View 1 Replies
View Related
Feb 13, 2012
I have 2 Cisco routers 3945. Use HSRP for links failover. Does exist any possibility (any protocol) which makes routers configuration's automatic synchronization (as failover for ASA firewalls)? I mean, if I will make any configuration changes on the Active router, automticly will taken this changes by the Standby router.
View 3 Replies
View Related
Sep 3, 2011
Transceiver integration within Cisco 3945.I need to supervise the DOM (Digital optical monitoring) capability of LX laser integrated within CISCO 3945.But after study of the Cisco DataSheet on transceiver module compatibility:
[URL]
I've seen that the SFP-GE-L model which supports DOM cannot be integrated within Cisco 3945.As specified in the datasheet, the only model of LX lasers compliant with CISCO 3945 is GLC-LH-SM (without DOM).However, after study of this datasheet, I can see that Cisco propose this Tranceiver model with DOM capability: GLC-LH-SMD But, so far I can't figure out if this model (GLC-LH-SMD) with the DOM capability is supported on Cisco 3945 and can be monitored through monitoring tools? If not, is there an other alternative to supervise the DOM capability with transceiver (LX) to be intergated within Cisco 3925?
View 1 Replies
View Related
Mar 7, 2012
We want to implement HSRP between two 3945 ISRs:
RouterModelIOSModuleR1Cisco 3945 Integrated Service
Routerc3900-universalk9-mz.SPA.151-1.T.binNME-AIR-WLC12-K9
R2Cisco 3945 Integrated Service
Routerc3900-universalk9-mz.SPA.151-4.M1.binNME-AIR-WLC25-K9
The issue that we are experimenting is that, although the module's interfaces are up and HSRP in correctly configured, the show standby summary displays that the Active router is local in both routers. We also have some GigabitEthernet in the routers and they are correctly running HSRP. Does the WLC Modules physically support HSRP?
View 1 Replies
View Related
Jan 30, 2012
Does 3945 support nat for SCTP ?
View 3 Replies
View Related
Mar 29, 2012
I have to replace the 3745 which is our edge router (running (C3745-ADVIPSERVICESK9-M), Version 12.4(23), RELEASE SOFTWARE (fc1)) with (I think) a 3900 (drawing from memory, I haven't actually seen the device yet).In an ideal world, I SHOULD be able to just set term length to "0", do a show run, copy that off to a text file, and then paste it into the new one...
View 19 Replies
View Related
Nov 10, 2011
I need to upgrade a router from a 2811 to a 3945.
2811 has the following modules:
View 1 Replies
View Related
Aug 8, 2012
I have a Ethernet module (SM-ES3G-16-P) installed in a 3945 router and noticed during first boot no licenses are active at all. I would assume at a mimimum ipbase would be active. With this module, does static routing work with just ipbase?
Example:
interface g0/1
no switchport
ip addr 192.168.254.2 255.255.255.0
[code]....
View 3 Replies
View Related
Oct 3, 2012
I have some lags on my 3945 router. From show ip nat statistics there is following output:
BR1#show ip nat statistics
Total active translations: 20 (0 static, 20 dynamic; 20 extended)
Peak translations: 8877, occurred 1w0d ago
Outside interfaces:
GigabitEthernet0/0, GigabitEthernet0/1
[code].....
View 1 Replies
View Related
Jan 15, 2013
Is Cisco 3945 router support URL based filtering . For example to block website [URL] but not the main site [URL].
View 1 Replies
View Related
Mar 15, 2012
I reported a really strange issue on a Cisco Router 3945. Here below info about release software used: [code] Please look at a brief extract of router running configuration file: [code] It’s an easy configuration of Extended ACL and the application on an Ethernet interface. The expected result is:
- The interface works properly (because access list is permitting every kind of data traffic in input)
- Checking “show access-list 180”, the counter of matched packets increments for all the packets that are forwarded inside the fa0/0/1.
But actually the Fastethernet 0/0/1 drops all the packets as if all the packets don’t match with access list (And this behavior is really incredible). The interface couldn't be used anymore because any kind of data traffic is denied.
View 14 Replies
View Related
Mar 12, 2013
Will the 3945 router work on 208 V single phase (line to line)? I know it mentions 100-240 VAC, but would the line-to-line issue cause a problem?
View 1 Replies
View Related
