Cisco WAN :: 3945E - Configuration For 20 T1 / E1
Sep 28, 2011
Does following configuration is responding to the request of my client asking for 20 T1/E1 connections on a Secure ISR 3945E, by combining on the same router One (01) NM-8CE1T1-PRI card and Three (03) HWIC-4T1/E1 cards.
Here are the router configuration:
CISCO3945E-SEC/K9 Cisco 3945E Security Bundle w/SEC license PAK
MEM-3900-1GU2GB 1GB to 2GB DRAM Upgrade (1GB+1GB) for Cisco 3925/3945 ISR
MEM-CF-256U1GB 256MB to 1GB Compact Flash Upgrade for Cisco 1900,2900,3900
NM-8CE1T1-PRI 8 port channelized T1/E1 and PRI network module
HWIC-4T1/E1 4 port clear channel T1/E1 HWIC
SM-NM-ADPTR Network Module Adapter for SM Slot on Cisco 2900, 3900 ISR
PWR-3900-AC/2 Cisco 3925/3945 AC Power Supply (Secondary PS)
CAB-ACE AC Power Cord (Europe), C13, CEE 7, 1.5M
S39EUK9-15104M Cisco 3925-3945 SPE IOS UNIVERSAL
PWR-3900-AC Cisco 3925/3945 AC Power Supply
3900-FANASSY Cisco 3925/3945 Fan Assembly (Bezel included)
C3900-SPE250/K9 Cisco Services Performance Engine 250 for Cisco 3945 ISR
ISR-CCP-EXP Cisco Config Pro Express on Router Flash
SL-39-IPB-K9 IP Base License for Cisco 3925/3945
SL-39-SEC-K9 Security License for Cisco 3900 Series
View 1 Replies
ADVERTISEMENT
May 30, 2013
I'm trying to migrate the running-config from our old 3725 router to our new 3945e router. Almost all of the config is copied over except for a few lines that come up as unrecongnized commands. So it looks like these commands were either removed or changed to something new.
View 12 Replies
View Related
Dec 13, 2012
I have a NAT setup. Some of my udp packets are dropping. How to find more about the NAT to find whether it missed anything or not. the router is 3945e. [code]
View 3 Replies
View Related
Mar 31, 2013
Can Cisco 3945E support VRF-Lite ?
View 4 Replies
View Related
Oct 23, 2012
the feature difference between Cisco 7204vxr vs 3945E.
Wanted to know the limitation in 3945E compared to 7204VXR
Features39457204VXR with G2MemoryPacket processingBandwidth support
View 1 Replies
View Related
Dec 16, 2011
I have inherited a 3945E router with an NM-8CE1T1-PRI card installed in slot 2 using the SM-NM adapter card. The command 'card type E1 2' has been issued but I only see interfaces Serial2/0:0 to Serial2/0:30.
Since it as 8 port card I was also expecting there to be
Serial2/1:0 to Serial2/1:30
Serial2/2:0 to Serial2/2:30
etc etc.......
Serial2/7:0 to Serial2/7:30
The router will not allow me to issue a sub slot number with the card type command.
Am I missing something in the configuration or is there an issue with this card and router combination? The show inventory has the following:
NAME: "Network Module Adapter for SM Slot on Slot 2", DESCR: "Network Module Adapter for SM Slot"
PID: SM-NM-ADPTR , VID: V01, SN: FOCxxxxxxxx
NAME: "8 port channelized and PRI T1/E1 NM on Slot 2", DESCR: "8 port channelized and PRI T1/E1 NM"
PID: NM-8CE1T1-PRI , VID: V01 , SN: FOCxxxxxxxx
It doesn't give any errors when booting up and the router is running c3900e-universalk9-mz.SPA.152-1.T.bin IOS.
View 2 Replies
View Related
May 29, 2013
I was looking for Rack Unit required for 7206 VXR & 3945E but couldn't find it.
View 1 Replies
View Related
Jan 8, 2011
Am looking at purchasing a router that is capable of serving a WAN bearer at up to 1Gbps. The 3945E has had good reviews as a high throughput router but the datasheets suggests performance of 350Mbps. It also states that additional performance can be ensured by adding SPE modules. Whether the 3945E could achieve up to 1Gbps with SPE modules?
If the 3945E can't achieve such performance, The key features I am after are:
IPV4 and IPV6 support
L2tpV3 support
BGP
IP SLA
1Gb Copper Connections on-board with capability of at least 4 Ports
View 2 Replies
View Related
Jan 20, 2013
I have an issue understanding the difference between 3945 and 3945E from VPN support perspective.
If you check this link here:
[URL]
You will see that the 3945E doesn't even have an ISM slot for a VPN ISM module and of course I could not find any ISM module for 3945E (I think this is obvious). Nevertheless, the above mentioned page and
[URL]
say "Embedded hardware-accelerated VPN encryption for secure connectivity" for 3945E
That the Cisco 3945E supports the same VPN features (including packet encryption / decryption in hardware) like a Cisco 3945 with VPN ISM card?
View 1 Replies
View Related
Nov 15, 2011
I'm looking to use a Cisco 3945E to terminate a 1Gbps Ethernet internet connection and I want to know the realistic throughput that I can expect. The router will only be configured with BGP with partial routes. No firewall or QoS will be configured.
View 8 Replies
View Related
Dec 1, 2011
I have a question concerning about how many ospf and bgp route entries does 3945E isr g2 router support?
View 6 Replies
View Related
Sep 11, 2011
I am wondering if IOS bundled by default with CISCO3945E-SEC/K9 and CISCO2911-SEC/K9 contains adv. ip services features (like Eigrp, OSPF etc.).
View 1 Replies
View Related
Jan 19, 2012
what this syslog message means? Being getting this on my 3945e series routers. My gut tells me they are caused by our Security guys scanning my routers with invalid login attempts.
%SSH-3-DH_RANGE_FAIL: Client DH key range mismatch with maximum configured DH key on server
View 1 Replies
View Related
Jun 24, 2012
I am using 3945E Router as Easy VPN Server, with 15.1 IOS. On router I have bunch on usernames for VPN authentication, I want to restrict Router management access for them(ssh,telnet, http and so on).
View 2 Replies
View Related
Jul 15, 2012
I'm trying wrap my head around bandwidth guarantee for nested maps. I tried adding a new class to two of my policy-maps today, and got this error: 3945E-1(config-pmap-c)#bandwidth 3000 Insufficient bandwidth 3000 kbps for the bandwidth guarantee
I'm not sure how it knows that with the nested maps and how it's computed. I have a 100mb WAN connectin going to 19 branches. I have a class-map that identifies traffic to the individual branch and within that class, a policy-map is applied to prioritize voice over video etc.
Here's the QoS setup:
class-map Branch1-Policy
match access-group branch-1-acl
*
*
[code]....
I was adding the Video-Conf class to both Traffic-6calls and Traffic-10calls when I got the above error. How would that percentage be calculated? I know by default i can only reserve up to 75% of interface bandwidth. The platform is 3945E running 15.1(3)
View 1 Replies
View Related
Feb 12, 2012
i want to create a trunk between 4507 & 3945E router & route two vlans from router 3945E
4507# vlan 99 & 51
# int vlan 99
# ip add 10.22.100.1/24
#int vlan 51
# ip add 10.22.103.1/24
[code].....
4507 version : IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.02.00.SG RELEASE SOFTWARE (fc4)
3945E: 15.1(2)T4 what I am missing?
View 3 Replies
View Related
Jul 17, 2012
I am position to migrate from CatOS 6509 switch to native IOS 6509 switch. long time ago, there was some site to convert automatically based on copy and paste onto the tool, but i can not find.
Does anybody know how to convert CatOS configuration to Native IOS configuration ? It is not IOS change, but it is configuration convert.
View 1 Replies
View Related
Dec 14, 2012
I have webcams that need port 8081 opened and I did that, everything worked fine until my DIR655 jammed up and power cycling it and the modem 3-4 times DID not make it work: no internet access and it was definitely a DIR655 problem. So, out with the paperclip to do the big reset, causing me to lose my configuration. When "most" of it came back up with my new config (I had screen prints), all was okay EXCEPT the webcams. Addresses and ports were all configured properly, address was fixed too on the client computer rather than use DHCP. I had a DNS relocation service running (DYNDNS) for the WAN side, but that address (My IP) didn't change either. I tried EVERYTHING. Finally, I realized in all my screwing around that I had enabled UPnP in my application, something I hadn't done before, but did this time as a desperation move. UPnP had always been checked off in the router. So.....I REMOVED my port forwarding and virtual server settings (either one worked before), and voila, everything working, Is this a normal occurrence, that if you have UPnP running, that this auto configuration overrides any manual configuration?
View 2 Replies
View Related
Feb 6, 2013
Can any explain this topology for me and how it works ? I don't understand the necessity of defining tow PVCs .
View 2 Replies
View Related
Feb 6, 2011
I want just want to know on how to add NAT inside and outside ip address.
For instance:
Original Address = 119.xx.xxx.257 (8138)
Translated Address = 119.xx.xx.28 (8138)
On the example above, I can access my web application by typing www.wesbite.com:8138
The settings above was configured by the previous administrator and unfortunately I dont know how to configure same thing as he did.
Now, I made new web application and set it to port 8139, so I should be able to access it by typing the www.wesbite.com:8139
In order to make it accessable on the internet, I should make configuration first on the router via NAT, and I dont know how.
Also, I tried to edit NAT configuration via Cisco SDM (Secutiry Device Manager)
Cisco SDM>Configure>NAT>Edit NAT Configuration
I clicked Add button but nothing happens, even clicking Edit and Delete button
View 4 Replies
View Related
Feb 25, 2013
I have an LMS 4.1 where sys log reports available for all the reachable devices on the network. All the devices were configured with the command "logging host <LMS_IP_address>".
The problem is that the report on LMS are shifted 2 hours from the clock displaying on the devices ("show logging" on any device).
How can I check the NTP configuration of LMS? Is it supposed to use the NTP configuration of the operating system (Windows Server 2008)?
View 3 Replies
View Related
Mar 27, 2011
Just trying to find my way through the new NAT configuration in later version of the ASA OS but having a few issues.
View 7 Replies
View Related
Jul 20, 2012
i have the asa5505 with asa8.4.5 and asdm 6.4.2. my asa work like site to site vpn with the other asa5505. i would be love that monitoring status of VPN. i enabled on asa logging, i puted address of smtp server, receipent email, source email, the problem is because my smtp server require authentication, TLS. how set configuration on asa5505?
configuration of logging for send notification on email.
View 3 Replies
View Related
Apr 11, 2011
why the following configuration is not working? I have two clustered ASAs inline from one another, in front of a 4506-E switch in front of a host I want to access via RDP, like so: My issue at this stage lies with getting the UNTRUST firewall configured. I've tried the following configuration 1) Creating the host.
View 13 Replies
View Related
Dec 4, 2012
I'm trying to setup an IPSEC tunnel above GRE using the topology in the attached image file.However the traffic between the 2 endpoints: lo0 on R5 (10.0.5.1) and lo0 on R4 is traveling via the GRE tunnel without being encapsulated in IPSEC: I'm using 2 routing protocols:
- OSPF area 0 for the connectivity between R1,R2 and R3
- EIGRP AS 1 for the internal sites connectivity
View 8 Replies
View Related
Jun 8, 2012
I'm shortly going to move our stuff to a new data centre, where we have two network feeds - so there'll be two lengths of CAT 5 coming into the rack, for "first hop redundancy".I have something similar at our existing DC, but I'm simplifying the equation somewhat at the new DC, and using a simpler configuration that just uses two switches, rather than two switches and two routers. All of the servers will have public IP addresses.Now - the network guy at the new DC has confirmed that a simpler two switch configuration will work.
View 17 Replies
View Related
Sep 27, 2011
Cisco 3550 and when I do a sh int fa0/1 and the status does not show last input or last output. Is a 3550 have a configuration that needs to be set?
View 0 Replies
View Related
Oct 6, 2011
I have a nat configuration to apply on a 8.4. I am a bit confused.On a ASA 7.0 the configuration is as such static (inside, outside) 10.102.247.0 10.102.247.0 netmask 255.255.255.0Basically, I want a bidirectional nat .. for users to connect to the inside network using the real IP.object network Delta subnet 10.102.247.0 255.255.255.0,object network Delta
View 0 Replies
View Related
Mar 30, 2012
The basic setup Newly installed redundant ISP, thus setting up the 891 with dual WAN Using PFR to load balance between the two. Did initial config through CCP (not express), but I am familiar with the basics of IOS CLI (not used to the new zone based firewall yet, managed aour old Pix for too long, but that is a different subject)
I cannot seem to get anything but Gi0 to be accepted as a WAN interface. I go through the entire setup in CCP, test each connection, etc, and it all looks good until I exit out of CCP and go back in. At that point, I get squat out of Fa8. CCP won't let me test the connection, won't let me edit the connection, wont let me delete the connection. The wizard for a new WAN connection becomes available again (Wanting to set up a "second" WAN on Fa7...)
Again, I have verified connections to each ISP line independently, either one works just fine on Gi0, neither ever works on Fa8. This is my first real foray into PfR.
Building configuration...
Current configuration : 21486 bytes
Last configuration change at 18:59:43 UTC Mon Mar 26 2012 by admin
[URL]....
View 4 Replies
View Related
Apr 22, 2012
After launching config collection job in LMS 4.2 I can't get job results and receive error message - Unable to get results of job execution for device. I've increased the job result wait time using option in Admin > Collection Settings ... , but nothing changed.Here are screenshots of error message and wait settings I used.
View 3 Replies
View Related
Nov 21, 2012
1)how can i backup the configuration on cisco lms 4.2 and to re-imported later when i re-install the lms 4.2
2)how can i change the admin password on cisco lms 4.2
View 3 Replies
View Related
Aug 22, 2012
Our client has a vendor who needs to establish a VPN tunnel to their own router which sits behind our Firewall.
VPN Concentrator (Vendor) <------> ASA5505 Client (7.2) <-------> 3750 Switch <-------> VPN ASA outside Interface - 208.64.1x.x4 DG - 208.64.1x.x3
ASA Inside Interface - 172.20.58.13/30
3750 Switch Interface Connected to ASA - 172.20.58.14/30 and DG - 172.20.58.13
3750 Switch Interface connected to VPN router - 172.20.58.21
VPN Router Interface connected to the 3750 - 172.20.58.22/30 DG - 172.20.58.21
I have also attached a Visio for this and the running configuration from the ASA and 3750. We don't have access to the TNS VPN router. Our responsibility is to just to make sure the tunnel comes up.
1) Create a static NAT on the ASA for Public to Private IP of the VPN router
Public - 208.64.1x.x5 / 28
Private - 172.20.58.21 / 30
Will the ASA automatically ARP for this address or do i have to configure another interface on the ASA with this public IP?
2) What would the access list look like on the ASA?
3) The client gave us some config to copy the stuff on the ASA so that they can create the tunnel but i couldn't put those commands in the ASA. How would this be applied and on what interface?
Firewall Access: The following information pertains to access between the VPN router and the
VPN concentrator. If a firewall/router is present in front of the VPN the following services need to be
allowed:
permit esp host 208.224.x.x any
permit gre host 208.224.x.x any
permit udp host 208.224.x.x any eq isakmp
permit udp host 208.224.x.x any eq non500-isakmp(code )
View 2 Replies
View Related
Nov 28, 2012
I am using Prime LMS 4.2.2 software to archive configuration for my cisco Network Device switch and firewall . All works fine except for two new Cisco ASA 5525 and ASA 5545 ( Software Version 8.6.1.2 ) . I have already checked credential , ssh access , snmp configuration and all seem correct. But Archive configuration job end with failure. This is the error message:
View 1 Replies
View Related
