Cisco WAN :: Assigned Task Of Configuring 3945 Router For Sip Circuit
Aug 31, 2012I have been assigned the task of configuring a 3945 router for sip circuit. [code] Where am I supposed to put this config? On the bonded serial link?
View 2 Replies
ADVERTISEMENT
Cisco WAN :: Circuit-speed WAN Performance 2921 With 1gig Circuit
Jul 10, 2012I have a question regarding Circuit-speed WAN performance. I purchased a 1Gbps Internet Link and want to know what my max through put would be on that router.
The Data Sheet states 35Mbps, why buy this router if I can not utilize this 1gig circuit.
Cisco WAN :: 3945 - Configuring Routing With Switch Module SM-ES3-24P
Oct 11, 2011We have Cisco 3945 Router with SM-ES3-24P Switch Module. when we tried to configure routing in Router and Layer 3 ports on Switch module, the inter-communicaiton is not working?
how we can use routing in 3945 with SM-ES3-24P module?
Cisco WAN :: 880 Router Into 100MB WAN Ethernet Circuit What Throughput Will Get
Sep 30, 2011if i plug a cisco 880 router in to a 100MB WAN Ethernet circuit what throughput will i get? on cisco site it says 25mb/sec but if it is Ethernet shouldn't it be done in hardware and get the full 100mb/sec?
I know that a 1841 plugged in to a 40MB WAN circuit can match that speed but Cisco site say it only can do E1 speed.
Cisco WAN :: 3745 Router Available To Work With DS3 Circuit On Remote Site
Jun 6, 2011I need to make sure I have a router available to work with DS3 circuit on remote site. A remote field technician tells me there is a 3745 router with "HSSI" and external Adtran CSU/DSU available. Is that an indication this can work with DS-3 circuit?Which specific Adtran CSU/DSU do I need in order to make it work with DS3?
View 1 Replies View RelatedD-Link DIR-825 :: Router Won't Turn On After Lighting Triggered Circuit Breaker
Apr 17, 2012Last evening when I turned on lights a circuit breaker was triggered. I turned it back on and it didn't trigger again. I went to sleep but when I woke up this morning and turned on my pc I noticed that I couldn't get online. I checked my router and it was dead - no lights at all. I've tried unplugging it, letting it stay unplugged, hitting reset etc... but to no avail.Lighting and the electric outlets are behind separate circuit breakers, but the only explanation I can think of is that the triggering of the cb and my 825 dying are linked. Am l looking at a dead router or is it more likely that the power adapter got fried? I don't have a fluke at my place right now due to early packing in preparation to moving away in a couple of months time so I cannot test the output voltage of the adapter right now. . Where can I get a replacement power adapter if that happens to be the culprit?
View 1 Replies View RelatedCisco :: WCS 7.0.164 - Background Task Not Working
Apr 20, 2011Everyday 04:00 AM, I set repeatly configuration sync. But, Since 04/16/11 04:00:00, Background tsak is not working. So, I was wcs stop -> start (04/18/11 08:30) this situation is randomly occurrenced. I found similar symptom, bug CSCtf23192. This bug fixed 6.0.202. But, I used 7.0.164. I want to know that this bug occurence 7.x and fix in 7.0.172.
04/16/11 03:55:37.774 INFO [monitor] [PollSerializationLock-1] SiAqStatspostNetwork Ending updateServiceDomainNodes for Area 165.243.138.6-12603442904884/GSIDC_12F, elapsed = 0 04/16/11 03:55:37.837 INFO [monitor] [PollSerializationLock-1] SiAqStatspostNetwork Ending updateServiceDomainNodes for Area 165.243.138.6-12603443248315/GSIDC_13F, elapsed = 0 04/16/11 03:55:37.837 INFO [monitor] (code)
Cisco :: Creating A Scheduled Task In LMS3.2?
Jul 1, 2012create a scheduled task in LMS. In this task I would like to regularly check time on all network devices in LMS and generate a rapport about this that would be sent to e-mail. All network devices have the same NTP server. How can I create this task? LMS version is 3.2 SP1.
View 4 Replies View RelatedCisco WAN :: Configure 877W Router As Firewall With DHCP Assigned WAN IP
Nov 15, 2010I'm configuring a Cisco 877 router as my firewall.My WAN IP will be assigned dynamically with DHCP. I will also get my default route from DHCP.I will need to configure ip inspection and packet filtering.I will need to configure NAT, I will eventually need to also configure a dial-up VPN.
View 7 Replies View RelatedCisco :: Scheduler Max-task-time 5000 Command
Dec 10, 2011I was wondering what this command that appears in default configuration of cisco routers: scheduler max-task-time 5000.I did some research in forums but did not find anything apart from the "scheduler" command with other options.
View 2 Replies View RelatedCisco :: Switches That Can Perform Task Depending On Layer?
Jul 23, 2012I'm new and just entered in the world of studying my certification for Cisco, since I'm curious I see that there are switches that can perform task depending on the layer? I see some with specifics for Layer 2, some other for layer 3 and even some others with router capabilities!I know this is a rookie question but how do I know what the best switch for a network? or how can I identify them?
View 3 Replies View RelatedCisco :: Network Design Task - None Of The Domains Will Be Able To Communicate With Each Other?
Mar 6, 2013I've been tasked with designing a network consisting of 3 separate broadcast domains with each one representing a separate business accross 3 separate floors. None of the companies should be able to communicate with each other.I've been told that the design should only represent the first 3 layers of the OSI model so I'm only looking at Cabling, Switching and Routing.
I don't expect you all to tell me exactly how I should do this, however I just need a starting point. My main issue is with routing. I'm aware that each port on a router represents a broadcast domain so if I use one router, 3 broadcast domains, does that means that none of the domains will be able to communicate with each other? Should I use more than one router or can i get away with one? Also just so you are aware I've been told not to use VLans and each broadcast domain must have its own ip address schema.
Cisco WAN :: 3945 Router CPU Temperature?
Nov 8, 2012I am trying to find out what the 'normal' operating temperature of the CPU in a 3945 router is? We have just replaced some 2800 routers for 3945's and the NMS server initially complained about the new router CPU temperature being too high. Compared to the 2800 the CPU temperature is much hotter - 50 degrees celcius as opposed to 20-smothing degrees. I have searched but can't find what are considered 'normal'?
This is the output:
router#sho environment allSYSTEM POWER SUPPLY STATUS==========================Internal Power Supply 1 Type: DCInternal Power Supply 1 12V Output Status: Normal
[Code].....
Open Internet Connections Through Task Manager?
May 30, 2011my home pc doesnt have any desktop icons or a toolbar and so i am unable to connect to the internet.could tell how i could connect to the internet using task manager
View 6 Replies View RelatedCisco :: Upgrade A Router From A 2811 To A 3945?
Nov 10, 2011I need to upgrade a router from a 2811 to a 3945.
2811 has the following modules:
Cisco WAN :: 3945 Router NAT Output Interpretation?
Oct 3, 2012I have some lags on my 3945 router. From show ip nat statistics there is following output:
BR1#show ip nat statistics
Total active translations: 20 (0 static, 20 dynamic; 20 extended)
Peak translations: 8877, occurred 1w0d ago
Outside interfaces:
GigabitEthernet0/0, GigabitEthernet0/1
[code].....
Cisco WAN :: URL Based Filtering In Router 3945
Jan 15, 2013Is Cisco 3945 router support URL based filtering . For example to block website [URL] but not the main site [URL].
View 1 Replies View RelatedCisco WAN :: Access-list On Router 3945
Mar 15, 2012I reported a really strange issue on a Cisco Router 3945. Here below info about release software used: [code] Please look at a brief extract of router running configuration file: [code] It’s an easy configuration of Extended ACL and the application on an Ethernet interface. The expected result is:
- The interface works properly (because access list is permitting every kind of data traffic in input)
- Checking “show access-list 180”, the counter of matched packets increments for all the packets that are forwarded inside the fa0/0/1.
But actually the Fastethernet 0/0/1 drops all the packets as if all the packets don’t match with access list (And this behavior is really incredible). The interface couldn't be used anymore because any kind of data traffic is denied.
Cisco WAN :: 3945 Router IOS For VoFR Feature?
May 18, 20113945 Router IOS Required for support VoFR Feature
View 1 Replies View RelatedCisco WAN :: 3945 Router And E3 / T3 Network Cards
Aug 11, 2011I just got my first 3945 router and E3/T3 Network cards and when I do a sho ver I can see the E3/T3 card but when I do a show run all I see are the 3 GE interfaces.
View 1 Replies View RelatedCisco WAN :: Router 3945 Log To Get 100 Mbps As Sum Of Tunnels
Aug 9, 2011I am getting the following message from a 3945 router: %CERM-4-TX_BW_LIMIT: Maximum Tx Bandwidth limit of 85000 Kbps reached for Crypto functionality with securityk9 technology package license.
That router has 8 Gre/IPsec tunnels and one of those tunnels is 100Mbps.The question is, could I get 100Mbps as the sum of all tunnels, or is there a restriction to 85Mbps ??
Cisco WAN :: 2921 Configuration And ATM Circuit?
Jun 4, 2012We recently purchased a Cisco 2921 router to be our edge device for a small satellite office (24 users). In addition, to the router we purchased a vwic3-2mft-t1/e1 module. Now the surprise, we ordered a bonded T1, I thought we were getting frame-relay circuits from Verizon, but someone ordered a 3M IMA circuit. I am new to configuring serial connections, and had planned out a frame-relay configuration. With that said, I have the following questions:
1. Can I setup a working serial connection to Verizon using the installed ATM circuit and the 2921 and vwic3-2mft-t1/e1 card I have? If not, what do I need in conjunction with the 2921?
2. With the frame-relay configuration, I enable controllers, configured the MFR interface and sub-interface, and serials. How much different is setting up serial ATM connections?
Linksys Wireless Router :: E4200 DHCP Server Not Automatically Assigned
Jan 4, 2012I just bought a Linksys E4200v2 router and updated the firmware to 2.0.26.124551. The DHCP server is turned on however, it won't issue any IP addresses. I have to set IP reservations for all of my devices in order for the router to give them an IP address. This includes my printer, xbox360 and 2 computers. I'm also having this problem with the wired and wireless lan.
View 4 Replies View RelatedLinksys Wireless Router :: Unable To Access Ea4500 After Static IP Assigned
Apr 2, 2013I want to do with my ea4500 is assign it a static IP and access it after doing so. But, no matter how many times I try, I cannot enter its IP address in the address bar and see its settings. I change its IP to192 168 1 200. Subset 255... DG 192 168 1 1 DNS same.Under router address 192 168 0 1I CANNOT access this router at 192 168 0 1 at all. The thing is, the **bleep** settings are not any different the. How they were when it was WORKING. I literally took a screenshot of my setting in case a scenario like this would come up, yet it more problems arise. The only way I can access the router is by doing a factory reset and accessing it at 192 168 1 1.
View 9 Replies View RelatedRouters / Switches :: Only One Task Available When Log Into Thomson TG585 V8 Modem
Apr 7, 2011I connect to the internet through a Thomson TG585 v8 modem. When I log in to the modem's IP (192.168.1.254?) through a browser, I only get one task available, that is "Check connectivity for this internet service". As far as I know, I should have some management options, like for example to block websites, to limit internet service for certain devices etc... Does anybody knows why I don't have these options? Could it be a restriction from the Internet Service Provider?
View 2 Replies View RelatedDell :: XPS L702 Wireless Icon In Task Bar Does Not Change
Feb 2, 2013 I am able to connect to the internet wireless. The wireless icon does not change. The blue dot rotates and moves about but instead of showing a connection, just the signal bars showing, it shows a land line connection with a red X over it. This happened after one of those many Windows updates.
I know I could try a reset to an earlier boot however, I made too many changes, installs and such that I don't want to loose any of it. There has to be a workaround for this lousy problem. I though of perhaps deleting my wireless connection and reinstalling it from the modem on up to the router. I just don't want to keep digging a hole! Ya know what, I really miss my apple computer which I finally gave up on because the price was overwhelming.
Cisco AAA/Identity/Nac :: Acs 5.2 Unable To Launch Common Task On Authorization Profiles?
Feb 15, 2013I have recently installed acs5.2 evaluation on a vmware and i can't launch common task on authorization profiles when i click on it i have the bellow message javascript:cuesToggleTab('NetworkAccess',1,false,false
View 4 Replies View RelatedCisco WAN :: Cannot Configure A Voice-port On Router 3945
Dec 21, 2012When I try to configure a voice port (like voice-port 0/0/0:15) after doing a conf t, it gives me an error of invalid input detected.We are using a Cisco 3945. We have successfully setup 3825 and 2851 in the past.
View 2 Replies View RelatedCisco :: 3945 Router Error While Adding In CiscoWorks
May 29, 2010I have a Cisco 3945 Router and when we try to add the same into the Cisco Works it gives me an error saying " CM0056 Config fetch failed for 192.168.xx.xx Cause: CM0204 Could not create DeviceContext for 1238 Cause: CM0206 Could not get the config transport implementation for 192.168.xx.xx Cause: UNKNOWN Action: Check if required device packages are available in RME. Action: Check if protocol is supported by device and required device package is installed.
We are using LMS version 2.6. Any info on the latest router 3945 with support or not.
Cisco WAN :: 3945 / How To Remove A File With SNMP From Router
Dec 10, 2012On a 3945 voicegateway,I want to remove a wave file (announcement), with the purpose that a new one can be automaticaly downloaden from UCCE to the box.Is there a way to do that automaticaly with SNMPSET <voicegateway> <MIB OID> <??wave file name??> <reload>
EDIT: or clear the cache, which it should be I think. (all wave file cache, or only one file, not sure what should be used and/or what is possible
Cisco Switching/Routing :: VPN Configuration For 3945 Router
Dec 2, 2012the router IPSec VPN config for remote users using Cisco VPN Client 5.0.07
Router 3945 IOS C3900-UNIVERSALK9-M Version 15.1(4)M4
Here is VPN related config part and log from router and client.
aaa new-model
!
!
aaa authentication login default none
aaa authorization network default none
!
!
crypto isakmp policy 5
encr aes 256
authentication pre-share
[Code]...
I highlighted strings with possible problems of of unabling to connect but doesn't know what to do with it.
Cisco :: ADSL Comes Under Circuit Or Packet Switching?
Dec 3, 2011I found that ADSL is packet switching type of communictaion. Definition for circuit switching is "A type of communications in which a dedicated channel (or circuit) is established for the duration of a transmission."In practical, telco line connects to the ADSL modem/router through which we are communicating to internet.In this context I have some doubt.The telco line which is connected to our ADSL modem is not shared with any other device ,connects only to the CO of the telco where we get the internet connection.That means the line which connects to the modem is dedicated upto CO.then it becomes circuit switching or not upto the CO.
View 5 Replies View RelatedCabling / Cards :: Why Does Task Manager Not Detecting Network Card
May 15, 2012I open up the task manager and it does not detect my network card even though it is inserted correctly
View 7 Replies View Related