D-Link DIR-825 :: Router Won't Turn On After Lighting Triggered Circuit Breaker
Apr 17, 2012
Last evening when I turned on lights a circuit breaker was triggered. I turned it back on and it didn't trigger again. I went to sleep but when I woke up this morning and turned on my pc I noticed that I couldn't get online. I checked my router and it was dead - no lights at all. I've tried unplugging it, letting it stay unplugged, hitting reset etc... but to no avail.Lighting and the electric outlets are behind separate circuit breakers, but the only explanation I can think of is that the triggering of the cb and my 825 dying are linked. Am l looking at a dead router or is it more likely that the power adapter got fried? I don't have a fluke at my place right now due to early packing in preparation to moving away in a couple of months time so I cannot test the output voltage of the adapter right now. . Where can I get a replacement power adapter if that happens to be the culprit?
View 1 Replies
ADVERTISEMENT
Jul 10, 2012
I have a question regarding Circuit-speed WAN performance. I purchased a 1Gbps Internet Link and want to know what my max through put would be on that router.
The Data Sheet states 35Mbps, why buy this router if I can not utilize this 1gig circuit.
View 1 Replies
View Related
Jul 29, 2011
The idea is to get the date/time logged motion detection is triggered on a certain time frame of the day (5:00 am to 5:30 am), to a txt file or something like that. I plan to port the log to a html/php website.
View 1 Replies
View Related
May 18, 2012
Yesterday the WLAN light stopped lighting up on my wireless router. The DSL light comes on (green), however, the WLAN light doesn't light up and the 'inetrnet' light stays on red. My laptop is saying cannot detect network, but is detecting other wireless networks in area (so not laptop prob). Did all the unplugging, turning everything off and even pressing the reset button on the back of the router but its still not working. Tried plugging in a USB cable directly from router to laptop and 'internet' light flashed green for 1 second then went back to red and still not working.
View 1 Replies
View Related
Jan 3, 2012
does any one know why a dlink router won't turn on after being unplugged now it won't light back up
View 4 Replies
View Related
Mar 3, 2013
I wish to turn my TP-Link wireless router into an access point but can't figure out how to do it. I have tried several times but without any success. Below are my information about my main router and the router I want to turn into an access point:
1- Main Router: TP-LINK 3G/4G Wireless N Router 300Mbps - Model No. TL-MR3420. url..
2- Router I wish to turn into an access point:TP-LINK Wireless N Router 150Mbps - Model No. TL-WR740N. url...
View 1 Replies
View Related
Feb 18, 2013
Installation of 2 x 4 Mbps MPLS circuit on primary router (CISCO 2951) and 1 x 8 Mbps Ethernet link on secondary router (Cisco 2951). We have successfully implement the primary router with 2 x 4 Mbps MPLS circuit. Site is having two computer room CR1 and CR2 and distance between both room is 200mts. CR1 is having primary core router and primary core switch where the service provider terminated the new MPLS circuit and we have done the successful implementation. CR2 is having Secondary core router and secondary core switch where we needs to have the termination of Ethernet link but service provider has delivered the Ethernet link on the CR1 which is incorrect DMARC Location.
Both the computer rooms are connected via optical copper can we use that copper to connect the circuit on CR2, as per my understanding we can use the optical fiber to connect the wind circuit on secondary router on CR2 by using the media connector.
View 1 Replies
View Related
May 31, 2012
For the past year or so, 5-6 times a day my router's green internet light will turn red, needing a reset... 99% of its usage is through wired connections and this is the only router in my home.
View 1 Replies
View Related
Aug 18, 2010
I'm migrating the configuration from a Cisco 12416 router running Cisco IOS, to a CRS1 router running IOS-XR.In IOS I have configured the following command for FRR "ip rsvp signalling hello bfd". I cannot find the way to configure this parameter using IOS-XR.
View 7 Replies
View Related
Sep 30, 2011
if i plug a cisco 880 router in to a 100MB WAN Ethernet circuit what throughput will i get? on cisco site it says 25mb/sec but if it is Ethernet shouldn't it be done in hardware and get the full 100mb/sec?
I know that a 1841 plugged in to a 40MB WAN circuit can match that speed but Cisco site say it only can do E1 speed.
View 3 Replies
View Related
Apr 4, 2013
I'm trying to enforce a triggered EEM applet with an ACL rule. Is this even possible? I've been searching for weeks, but the closest thing I can find is using an SNMP evenst, which isn't what I'm looking for. I've looked at the list of event triggers (and I've used resource events before), but I can't find anything that works.
I'm specifically trying to switch packet capture on/off (with a script or EEM applet) on some 2900 series routers. I have 2960s and 2911s.
View 3 Replies
View Related
Aug 31, 2012
I have been assigned the task of configuring a 3945 router for sip circuit. [code] Where am I supposed to put this config? On the bonded serial link?
View 2 Replies
View Related
Jun 6, 2011
I need to make sure I have a router available to work with DS3 circuit on remote site. A remote field technician tells me there is a 3745 router with "HSSI" and external Adtran CSU/DSU available. Is that an indication this can work with DS-3 circuit?Which specific Adtran CSU/DSU do I need in order to make it work with DS3?
View 1 Replies
View Related
Jun 23, 2012
My NetGear WG111v3 router no longer lights up, so I assume it's broken. Is there a way to hardwire it in through the ethernet in the NetGear modem? It tried already but when I click on the software it just beeps at me and won't open.
View 2 Replies
View Related
Feb 25, 2011
I switched my Dell Latitude D630 on yesterday morning and the WiFi light wasn't lit, and I am unable to connect to any network. I'm completely baffled why this has happened. I was using it the previous night, streaming some music on Spotify, then I turned it off as normal, and when I tried using the internet the next day...nothing. The bluetooth light is lit as normal but the WiFi light stays off, and I've tried turning the external switch on/off to no avail.
View 8 Replies
View Related
Apr 28, 2011
was using windows 7 ultimate OS. last night my internet antenna was hit by lightning. later i switched on my PC and i was to browse internet, but i couldn't connect to it. i don't know whether my Ethernet port was damaged by lightning[CODE]
View 1 Replies
View Related
Jun 5, 2013
I had deployed Fifty 1131AG AP with Cisco 5508 Controller, the problem is some APs giving a orange ligth and some of them didn't flashing "there Led is Off"
View 8 Replies
View Related
Feb 12, 2011
My network is set up in the following way..
DSL-320B | Linksys E3000 192.168.0.0/24 Subnet A Static Route 192.168.1.0 255.255.255.0 192.168.0.100 | Wan Port 192.168.0.100 DIR-655 | DIR-655 192.168.1.0/24 Subnet B
I am unable to browse by IP any machines on Subnet B from Subnet A and suspect this is due to the NAT and the Endpoint filtering within the DIR-655.
View 2 Replies
View Related
Nov 29, 2011
I have version A3 hardware with the latest firmware installed. When i use wireless N, after transferring a large file from my PC to my NAS over wireless, the router slows to a crawl once the file is done. The next file i try to transfer moves at about 200-300kB/s as opposed the the previous 8+MB/s. Watching nextflix and gaming is also slow. After i unplug and plug back in the router, everything is fine. It doesn't do it everytime, but does happen often enough to be frustrating.
After experimenting with different wireless N settings, and trust me i've tried like every combination. I set the router to wireless G only, the transfer speeds are about 2-3MB/s but it always has that speed. It's been stable for well over a month now. But i bought an N router, and want faster speeds. What's the warranty period for this router?
View 3 Replies
View Related
Jan 22, 2012
I have the DCS-930L set up at home with motion detection emails. I only want it to be sending emails when I am not home, of course, but there's no way to turn off the camera through my dlink.com as far as I can tell (only an option to remove the camera, which I assume is something more drastic). Is my only choice to unplug the camera when I don't want it emailing?
View 6 Replies
View Related
Apr 19, 2011
Is there any way to turn off the front green LED on the DCS-930L or do I just cover it with a piece of opaque tape?
View 2 Replies
View Related
May 30, 2012
If I turn off the wireless on my DAP-1522 in bridge mode, will it basically become a Gig Switch?? I've changed my network around abit and don't need it in bridge mode at this point but would love to use it as a plain switch. Would this do the trick??
View 3 Replies
View Related
Apr 28, 2013
Region : Others
Model : TD-W8968
Hardware Version : V1
Firmware Version :
I have a problem in the model TD-W8968 of modem.Wireless abruptly stopped Even works must turn off the modem Malk happens sometimes 3 to 5 times
View 1 Replies
View Related
Jan 15, 2009
We have a new DCS-5220 that we're playing with, seeing what we can do with it, and have a number of questions as well as one possible bug to report. I was somewhat surprised when tier 3 support said this was the best place to cover them all - including the bug.We are using firmware version 1.02, which is what the camera came with.
In the webgui, under Configuration > Tools > System > "Turn off the LED indicator" this is completely ignored by the camera. The red power LED is always on, and the green status LED flashes as long as it has a network connection. This is clearly a bug.What is the root password?Is there a URL we can pole for a static image? (ie.url... which would trigger a snapshot every time the URL is requested)Are there any shell commands for motor control? If so, what are they?Is there a shell command to retrieve logged in users? If so, what is it?Is there a shell command for controlling the LED activity? It would be really nice if the status LED lit green when there was someone logged on to the webgui. Perhaps this is the intended activity, and it not doing so should be filed away as part of the above bug..
View 14 Replies
View Related
Jun 4, 2012
We recently purchased a Cisco 2921 router to be our edge device for a small satellite office (24 users). In addition, to the router we purchased a vwic3-2mft-t1/e1 module. Now the surprise, we ordered a bonded T1, I thought we were getting frame-relay circuits from Verizon, but someone ordered a 3M IMA circuit. I am new to configuring serial connections, and had planned out a frame-relay configuration. With that said, I have the following questions:
1. Can I setup a working serial connection to Verizon using the installed ATM circuit and the 2921 and vwic3-2mft-t1/e1 card I have? If not, what do I need in conjunction with the 2921?
2. With the frame-relay configuration, I enable controllers, configured the MFR interface and sub-interface, and serials. How much different is setting up serial ATM connections?
View 2 Replies
View Related
Feb 13, 2013
Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : V1_121225
ISP : Cogeco
I bought the 4300 a week ago - and just recently discovered that you cannot turn off the wi-fi radio using a schedule.
I thought this was "wireless router 101" - since my last three routers had this feature... apparently not with TP-Link.
View 2 Replies
View Related
Jan 28, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : 120926
ISP :
Is it possible to turn off the web server facing the internet. When accessing my external ip address I am presented with the logon banner requesting user name and password together with the TP-Link name and model numbers. I would much prefer if I could switch this access and banner off.
View 4 Replies
View Related
Dec 3, 2011
I found that ADSL is packet switching type of communictaion. Definition for circuit switching is "A type of communications in which a dedicated channel (or circuit) is established for the duration of a transmission."In practical, telco line connects to the ADSL modem/router through which we are communicating to internet.In this context I have some doubt.The telco line which is connected to our ADSL modem is not shared with any other device ,connects only to the CO of the telco where we get the internet connection.That means the line which connects to the modem is dedicated upto CO.then it becomes circuit switching or not upto the CO.
View 5 Replies
View Related
Apr 17, 2012
how to configure the 2nd WAN port to support 4G/LTE connectivity that will serve as the backup circuit to the primary MPLS circuit?
View 2 Replies
View Related
Jan 10, 2011
Imagine you have 5 sites, one router each site (2851 as CE) connected to MPLS network. All sites have max 3xT1.Requirement:In case CE router or circuit to MPLS fails in any of those sites, I need to provide backup circuit to reach MPLS network.
Proposal:Bring one Internet circuit to each of those sites and create DMVPN to every site.
Question:Let's say Site1-MPLS circuit goes donwn.
Then all traffic from Site1-MPLS should flow thru the IPSec tunnel to all other MPLS sites. Am I right that the traffic coming from Site1-MPLS will ingress via the 2851 CE routers, correct? Is this the typical design? How to accomplish this, I'd like to setup a lab to simulate it.
View 2 Replies
View Related
Apr 22, 2012
The only option that I have under the IOS that's installed on a 2900 series router is track. I don't have a version that supports SLA. The interface is connected to a switch that the ISP gave, and all of the tests that I've done refuse to make the circuit go down. If I were to lose the circuit, the interface won't show to be down unless the switch were to go down.
Is there any way with track to see that the provider's circuit went down on a switch? I was going to set up sla to ping the ISP's address, but I can't do that unless I upgrade the OS. These are a pair of routers running hsrp at a remote datacenter. Is sla the only way that I'm going to be able to accomplish this? I have tried track with different options in gns and all of them keep the CE's interface up and doesn't show it down. Watching a route in the table isn't feasible because I wouldn't want it to fail over because another site is having problems. Tracking the route doesn't work for connected routes either because the route itself doesn't leave the table as long as the interface is up.
View 5 Replies
View Related
Jun 12, 2002
I am setting up a T-1 circuit and the instructions for the WIC on the router request that I use a RJ48C cable. I do not have one. Can I get away using a normal RJ45 Cat5e cable?
View 8 Replies
View Related
Mar 21, 2013
We currently have 3* offices located in London, Reading and Oxford which have a (ISP) VPLS service to interconnect all sites.I am using RIPv2 for intersite routing between all offices. We plan on implementing a backup circuit at the Oxford office for resiliency.There are 2* Core 4500 Switches, Core 1 is uplinked to the Primary circuit and Core 2 will be uplinked to the Backup circuit.At the moment Core 2 learns all of its routes from Core 1.My question is, if the Primary circuit goes down, how do we get the Routing on the Core Switches to than point out of the backup circuit?
View 1 Replies
View Related
