D-Link DIR-655 :: Have To Turn Off Wireless N For Stability
Nov 29, 2011
I have version A3 hardware with the latest firmware installed. When i use wireless N, after transferring a large file from my PC to my NAS over wireless, the router slows to a crawl once the file is done. The next file i try to transfer moves at about 200-300kB/s as opposed the the previous 8+MB/s. Watching nextflix and gaming is also slow. After i unplug and plug back in the router, everything is fine. It doesn't do it everytime, but does happen often enough to be frustrating.
After experimenting with different wireless N settings, and trust me i've tried like every combination. I set the router to wireless G only, the transfer speeds are about 2-3MB/s but it always has that speed. It's been stable for well over a month now. But i bought an N router, and want faster speeds. What's the warranty period for this router?
View 3 Replies
ADVERTISEMENT
Nov 8, 2012
I have a WLC 5508 with half a dozen LAPs (AIR-CAP3502I-E-K9).They have been working but sometimes clients detect conectivity problems with the wlan.Here is the message log I can obtain from the controller:
View 1 Replies
View Related
Feb 8, 2011
my old D-link DGL-4300 was rock steady showing 54 Mbps constant speed (link rate) (in Windows 7 Home Premium 32 bit Wireless Network Connection Status window). The new E4200 jumps around from 72 Mbps to 114 Mbps to 130 Mbps to 144 Mbps. However, it mainly stays at 72 Mbps. I have seen 150 Mbps briefly but I have never seen 300 Mbps. I have even placed my laptop within 2 -3 ft of the router and have a strong signal (4 bars) but I still have the same link rate issue. I would think that Windows would show 300 Mbps link rate for my connection when it is that close to the router. My laptop is a Toshiba with an integrated Intel WiFi Link 5100 AGN wireless adapter. My son also has a Toshiba laptop with the same wireless adapter but he gets lower speeds than mine due to the fact that he is 50' away in another room in the house. His connection also jumps around but it is at lower link rates than mine.
View 9 Replies
View Related
Aug 24, 2012
I have a client family who will be moving into a big one floor (but on a giant slope hill as if it had two floors) house. About 88 feet seems to be the longest distance from a small room with the new cable modem. This is based on Google Maps' aerial shot: [URL] Longest Distance FromACableModemRoom.jpg (right side/east is a huge hill with trees).Will an old wireless Linksys WRT54GL router be able to handle this far distance with fast speeds and stability? If not, then which wireless routers can do it? It would be nice to have third party firmware options like Linksys WRT54GL routers. Also, fast speed like gigabits for fast local file transfers between computers in the big house! 100mb/sec is slow these days! Stability and support are important too. The routers doesn't need to be the latest too
View 9 Replies
View Related
May 30, 2012
If I turn off the wireless on my DAP-1522 in bridge mode, will it basically become a Gig Switch?? I've changed my network around abit and don't need it in bridge mode at this point but would love to use it as a plain switch. Would this do the trick??
View 3 Replies
View Related
Apr 28, 2013
Region : Others
Model : TD-W8968
Hardware Version : V1
Firmware Version :
I have a problem in the model TD-W8968 of modem.Wireless abruptly stopped Even works must turn off the modem Malk happens sometimes 3 to 5 times
View 1 Replies
View Related
Feb 13, 2013
Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : V1_121225
ISP : Cogeco
I bought the 4300 a week ago - and just recently discovered that you cannot turn off the wi-fi radio using a schedule.
I thought this was "wireless router 101" - since my last three routers had this feature... apparently not with TP-Link.
View 2 Replies
View Related
Jan 28, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : 120926
ISP :
Is it possible to turn off the web server facing the internet. When accessing my external ip address I am presented with the logon banner requesting user name and password together with the TP-Link name and model numbers. I would much prefer if I could switch this access and banner off.
View 4 Replies
View Related
Dec 19, 2010
We have several 877 routers across a few cities and experience infrequent 'drop-out's which are typically characterised by log entries like the example below.
Our biggest problem is that there is a 60-90 second hard-down period rather than just a 1-2 second 'blip' ... and TCP etc. don't cope well with an outage of this duration.
In general the SnR etc. on the links is good and these occurances are quite rare but when they happen it can be very alarming for users and transactions can fail.
configuration (prefereable acheivable at the CPE rather than the DSLAM end) to work:
1. reduce the outage duration... can the interface be instructed to be less sensitive to temporary line noise and just 'suck it up' rather than resynching?
2. improve the stability of the line... perhaps at the cost of a reduced speed?
3. improve logging of the root cause of the interface going 'down'?
%LINK-3-UPDOWN: Interface Virtual-Access2, changed state to down%DIALER-6-UNBIND: Interface Vi2 unbound from profile Di1%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to down%LINK-3-UPDOWN:
[Code].....
View 3 Replies
View Related
Mar 5, 2013
I have an ASA 5550 appliance that I am upgrading the code on. It is not being used for anything crazy advanced. It is simply an IPSEC tunnel and router. My main concern is stability, so obviously I would not be using a latest release. I want something that's tried and true. I am currently using asa831-k8.bin
View 16 Replies
View Related
Jul 30, 2012
I’m testing a 1841 with 2 WIC-1ADSL cards, but the connections are dropping every 30-50mins. If I swap the cars out for HWIC-1ADSL’s then the lines are stable. I’ve had the profiles on the lines dropped the 4mb down and 512k up but I’m still getting the same issue.
I’ve tried a few 1841’s with various IOS’s and different WIC’s but still get the same result.
View 2 Replies
View Related
Jan 3, 2012
does any one know why a dlink router won't turn on after being unplugged now it won't light back up
View 4 Replies
View Related
Feb 12, 2011
My network is set up in the following way..
DSL-320B | Linksys E3000 192.168.0.0/24 Subnet A Static Route 192.168.1.0 255.255.255.0 192.168.0.100 | Wan Port 192.168.0.100 DIR-655 | DIR-655 192.168.1.0/24 Subnet B
I am unable to browse by IP any machines on Subnet B from Subnet A and suspect this is due to the NAT and the Endpoint filtering within the DIR-655.
View 2 Replies
View Related
Jan 22, 2012
I have the DCS-930L set up at home with motion detection emails. I only want it to be sending emails when I am not home, of course, but there's no way to turn off the camera through my dlink.com as far as I can tell (only an option to remove the camera, which I assume is something more drastic). Is my only choice to unplug the camera when I don't want it emailing?
View 6 Replies
View Related
Apr 19, 2011
Is there any way to turn off the front green LED on the DCS-930L or do I just cover it with a piece of opaque tape?
View 2 Replies
View Related
Mar 3, 2013
I wish to turn my TP-Link wireless router into an access point but can't figure out how to do it. I have tried several times but without any success. Below are my information about my main router and the router I want to turn into an access point:
1- Main Router: TP-LINK 3G/4G Wireless N Router 300Mbps - Model No. TL-MR3420. url..
2- Router I wish to turn into an access point:TP-LINK Wireless N Router 150Mbps - Model No. TL-WR740N. url...
View 1 Replies
View Related
May 31, 2012
For the past year or so, 5-6 times a day my router's green internet light will turn red, needing a reset... 99% of its usage is through wired connections and this is the only router in my home.
View 1 Replies
View Related
Apr 17, 2012
Last evening when I turned on lights a circuit breaker was triggered. I turned it back on and it didn't trigger again. I went to sleep but when I woke up this morning and turned on my pc I noticed that I couldn't get online. I checked my router and it was dead - no lights at all. I've tried unplugging it, letting it stay unplugged, hitting reset etc... but to no avail.Lighting and the electric outlets are behind separate circuit breakers, but the only explanation I can think of is that the triggering of the cb and my 825 dying are linked. Am l looking at a dead router or is it more likely that the power adapter got fried? I don't have a fluke at my place right now due to early packing in preparation to moving away in a couple of months time so I cannot test the output voltage of the adapter right now. . Where can I get a replacement power adapter if that happens to be the culprit?
View 1 Replies
View Related
Jan 15, 2009
We have a new DCS-5220 that we're playing with, seeing what we can do with it, and have a number of questions as well as one possible bug to report. I was somewhat surprised when tier 3 support said this was the best place to cover them all - including the bug.We are using firmware version 1.02, which is what the camera came with.
In the webgui, under Configuration > Tools > System > "Turn off the LED indicator" this is completely ignored by the camera. The red power LED is always on, and the green status LED flashes as long as it has a network connection. This is clearly a bug.What is the root password?Is there a URL we can pole for a static image? (ie.url... which would trigger a snapshot every time the URL is requested)Are there any shell commands for motor control? If so, what are they?Is there a shell command to retrieve logged in users? If so, what is it?Is there a shell command for controlling the LED activity? It would be really nice if the status LED lit green when there was someone logged on to the webgui. Perhaps this is the intended activity, and it not doing so should be filed away as part of the above bug..
View 14 Replies
View Related
Feb 27, 2012
How do you turn the wireless on?
View 1 Replies
View Related
Dec 16, 2012
I have a HP 6910p laptop computer and no wireless button to turn so how do i turn on my wireless
View 1 Replies
View Related
Jun 6, 2012
how to turn wireless capability on ,on hp 530?
View 1 Replies
View Related
Jul 14, 2011
I have a sling catcher but I need to access my rought on the 3rd floor how can I get it on a wirless network
View 4 Replies
View Related
Jan 3, 2013
How to turn on wireless on acer
View 1 Replies
View Related
Aug 27, 2011
my wireless on my computer says that it is not enabled... how do i enable it? i do not have a wireless button, and my computer defonately is wireless?
View 1 Replies
View Related
Apr 9, 2012
i have a ibm thinkpad and dont know how to turn on the wireless switch
View 3 Replies
View Related
Feb 17, 2012
I recently got a d630 and installed a wireless card the computer detects it and i installed the drivers computer says it's working good but no wifi light turns on and nothing happens when I push the wifi button and it is running windows vista and the card is shown in windows networking just want to get this fixed
View 4 Replies
View Related
Dec 17, 2012
how do i turn my wireless connection back on my laptop
View 1 Replies
View Related
May 27, 2011
PB c3 easy notes wireless wont turn on wireless adaptar and drivers updated
View 2 Replies
View Related
Dec 8, 2012
i have an hp laptop that has a wireless button on the top right hand of the typing area. It has turned red before and all i had to do was push the button and it would turn gree. It has gone red again and when i push the button it stays red.
View 1 Replies
View Related
Dec 20, 2011
How to turn on Wireless on Emachines E627?
View 1 Replies
View Related
Mar 17, 2011
I can't find out how to turn on my wireless radio on IBM T41p. The Fn+F5 does nothing. I do not have internet because of this.
View 2 Replies
View Related
Sep 28, 2011
I have lost my wireless connection. I was wondering if somehow it got turned off on my Linksys E2000
View 1 Replies
View Related
