Cisco :: WAP321 - Forgot Port Number For Radius Settings?
Apr 22, 2013
Where can you set the port numbers for auth and accounting on a WAP321?I can see where to set up to four IP addresses for the servers themselves, shared secret etc - but nowhere can I see where the port number is configured.
In a day and age of exceptionally limited IP resources, cloud hosted services and even just a little "security through obscurity" there are many reasons for needing to set a non-standard port number for the radius server.I'm at a loss how it could be in residential products, but not small business devices?
View 1 Replies
ADVERTISEMENT
Apr 19, 2012
End user has APs config with Radius server, working fine
-server 10.42.1.21 auth-port 1645 acct-port 1646
-server 10.36.1.46 auth-port 1645 acct-port 1646
In some weeks all APs will be migrated to WLC. My doubt is regarding the config in RADIUS Athentication Server port number field. There is only one option for adding.Which port number should I use? , When a new server is added always show 1812 port number; documentation states that is for authentication and 1813 for accounting.
View 8 Replies
View Related
Nov 11, 2011
I forgot password for my modem settings. I changed the default 'admin' 'password' for security reasons but now I forgot it.Without it I couldn't even change WEP Key to connect wireless. I'm using Compex WRL254G All in One Router/Modem.
View 6 Replies
View Related
Aug 1, 2012
I'm fighting for a few days now to setup the captive portal of 2 wireless access point WAP321. I was able to make it work with local user authentication but now, I want to manage my guest users on active directory. So I setup the captive portal to authentication user with NPS on Windows 2011 SBS.
The problem is that my guest SSID in not encrypted, so the NPS server do not let me login. I try to setup the NPS server like that :
Uncrypted authentification (PAP, SPAP)
Service-Type : Login
View 2 Replies
View Related
Oct 14, 2011
How to Open Port and I forgot my password.
View 2 Replies
View Related
Feb 28, 2012
I am doing 802.1X for a user on Cisco 3650 and wanted the Radius Server to return an attribute to set the Duplex setting of the port. with the correct Radius Return Attribute.
View 4 Replies
View Related
May 28, 2012
How to know port number of any URL, for example what is port number used by google.
View 19 Replies
View Related
Mar 19, 2011
Is is possible to set the port number for syslog eg 192.168.75.50:20514 ? i presume the protocol would stay udp
View 3 Replies
View Related
Oct 30, 2012
We have IP device on the farm switch(cat6500, which is an access layer siwtch), with the gateway on the core switches (Nexus7000), on the core when I do show ip arp, I found the mac.But when I do sh mac add add of that mac there is no port attached to that mac.
Since that particular vlan only resides on the cat 6500 and two cores, so I logged in to the 6500, and when I show mac- in that vlan, I didn’t find that mac addresss. Instead, I found another mac address with last 8bit are the same of that mac.
Is it some kind VIP of the mac? How so, if no port, how can the switch forward the frame? [code]
View 1 Replies
View Related
Apr 13, 2011
what port number does ping use?
View 3 Replies
View Related
Feb 15, 2013
I changed my router from Belkin F5D 7633-4 (G) to Belkin F5D 8636-4 v2 (N) on the 7633 I was able to set up virtual server page and access my CCTV cameras remotely with no problem but on the 8636 with the same info into virtual servers page I get "No 1 WAN address is invalid".The format of the page is slightly different the 7633 required "inbound Port" number to be put in twice in different boxes side by side and the same with "Private Port".The 8636 has only one box to enter the port number under each heading.
View 3 Replies
View Related
May 31, 2012
I have a ACS 5.1, My mailing server does not run on standard port number of smtp (25). Need to know if i can customize the port number suiting my mailing server requirement.
View 0 Replies
View Related
May 12, 2012
I have configured the following access-list on routers fa0 interface (i am using 1801)
access-list 111 permit ip any any log
and applied it in "in" direction on Fa0 interface.
Now when i am sending ssh packets to this interface its showing below
*May 14 05:09:00.104: %SEC-6-IPACCESSLOGP: list 111 permitted tcp 172.18.128.2(0) -> 172.18.128.146(0), 1 packet
why its not showing any port number ?
View 1 Replies
View Related
Dec 23, 2012
I would like to understand how public IP works in remote access. I do have belkin router and when I access it remote I type my public IP and after it the port number for example xxx.xxx.xxx.xxx:80 and if I would like to access an IP cam remotely in the same network i would do the same thing xxx.xxx.xxx.xxx:5656 (public IP). I do know my Public IP is unique.Thus, its quite logical I can access my devices remotely. my understanding of the port number is application specific that addresses packets in different applications in the same computer. For example port 80 is for HTTP connection used browsing the web, for chatting in MSN i will use different port number specifically for MSN...etc. my question is how I can access my belkin router remotely by typing the public IP and the port number knowing that the port number is application specific not device specific? My second question is, is it possible to access two routers in the same network remotely?
View 7 Replies
View Related
Jan 1, 2012
Clarifying whats the correct # of port asic in WS-X6704-LC?According to the following link (Catalyst 6500 Architectural white paper): [URL]
"In the WS-X6704-10GE line card, there are two port ASICs each supporting 2 x 10 Gigabit Ethernet ports"
While in the document: Understanding Quality of Service on the Catalyst 6500 Switch: [URL]
Table 10.
WS-X6704
Number of 10 GE Ports 4
- QoS on 10-Gigabit Ethernet Line Cards (WS-X6704-10GE)
So whats correct? 4 port asic or 2 port asic?
# Port ASIC’s on the linecard 4
# Physical Ports per Port ASIC 1
View 1 Replies
View Related
Nov 26, 2011
With basic "Wizard" setup I got DHCP and port 80 for the camera. It was working just fine with MyDLink and locally with DLink-ViewCam software and some local test web pages. However, we have a wireless printer on that router which also uses port 80, so when it was installed we set up a "port forward" for port 80 traffic to it for administration from other subnets. How MyDLink website is able to tunnel through our hardware firewall and the wireless routers firewall to communicate with the camera is not clear to me (perhaps someone can send me a link to an explanation??), but it works...Thus, to allow access to the camera from other subents, I wanted to change the camera's port from 80 to another, say 8181 and set up the appropriate "port forwarding for TCP and UDP. All of the steps below were from a PC within the camera's subnet/router so port forwarding is not an issue
View 5 Replies
View Related
Apr 23, 2013
Are you only able to have two sessions for port mirroring on a Cisco 4510?
View 1 Replies
View Related
Dec 2, 2012
I'm developing a project where I use the SNMP protocol to discover the network. By discovering the network I mean go through all the routers and switches and retrieve the IP routing table from routers and the forwarding table from switches. With the routers I have no problem. For the switches I need to know for each port the MAC addresses and the Vlans. Basically it's use SNMP to find a port number from a MAC address. To do that i followed this tutorial: [URL]
The problem is that I'm using a Cisco 3725 Router with IOS 12.4 (21) and a NM-16ESW module to work as a Switch and when I use the OID .1.3.6.1.2.1.17 corresponding to the BRIDGE-MIB as it follows:
snmpwalk -v2c -c myrouter 10.1.1.5 .1.3.6.1.2.1.17
it returns:
SNMPv2-SMI::mib-2.17.1.1.0 = Hex-STRING: 00 00 00 00 00 00
SNMPv2-SMI::mib-2.17.1.2.0 = INTEGER: 0
SNMPv2-SMI::mib-2.17.1.3.0 = INTEGER: 4
From this I guess there's no information on the router about Vlans or anything. Other thing is that when I use community string indexing it returns a timeout. My theory is that this version doesn't support indexing but I don't know.
how can I get the Port Number from a MAC address from this "switch" (it's a router working as a switch) using SNMP?
View 2 Replies
View Related
Apr 19, 2012
Background: currently have a WRT320N, thinking of upgrading to an EA4500 assuming ONE feature has been improved: Port Forwarding.
Scenario: Currently I have a WRT320N router, and while it "does everything we need" it has one limitation that is now getting in the way: limitation on number of forwardable ports. In the port forwarding panel, it has 15 total rows: the first five rows can be enabled for specificaly named services (SMTP, FTP, etc). The last 10 rows are fully customizable in that we can set the name, ports and protocol.
The problem is that of the 13 total ports I currently need to forward, only ONE of them is listed in that fixed list. So, sadly, I can only use one of those first five rows. I've now filled the remaining ten custom rows, and still have need for two additional ports (for now, may need more down the road).
Trying to get creative, I figured maybe I could just spill over to the Port Range Forwarding page and add a row or two there. The only problem: it's buggy. I've found that if the Single Port Forwarding list is filled, then the Port Forwarding Range entries don't work properly. For example, if I wanted ports 12345 and 12346 forwarded to 192.168.1.5, they work fine with two single port forwarding entries. However, if I delete those, add two other port lines I need forwarded (the single list being full again), and add a port forwarding range 12345..12346, they don't work properly, ports just are closed. Only the singles work, the ranges don't.
Question: Has the EA4500 resolved this issue and allow for either more lines (i.e. 20 customizable entries instead of 10), or, better, does it just have an [Add Entry] button to allow for additional rows to be created? In today's day and age, where one single device (such as an Xbox) can take four rows, a 10-row limit is pretty sparse. Comparing it to some competitors, for example the D-Link DIR-825 (aging, but still great) allows you to add as many as you want.
I realize "expensive" firewalls like SonicWall's have virtually unlimited customization, but I don't need many of the additional features and don't want to spend $350 on a "high-end" firewall to solve the problem of needing two more ports open.
View 4 Replies
View Related
Jan 3, 2012
I'm in the middle of a Nexus 5000 project and recognized today while configuring port-channels, that some of the interface numbers are reserved for internal use.
Is it possible to change or configure which port-channel interface numbers are allocated for internal use by NX-OS?
Unfortunatly I wasn't able to find a solution for this issue in the offical Nexus documentation, the search function of this forum or Google. If I did miss something or didn't look careful enough at the Nexus docs, I'm also happy with RTFM (... fine manual) responses and links to the info :-)
Additional info:
Nexus5k(config)# interface port-channel 128 ignored port-channel128: internally used, configuration not allowed
Port-Channels 111, 113, 115, 119, 121, 200, 211, 222 were created manually, but 127 - 129 were not.
Nexus5k# show port-channel usage
Total 11 port-channel numbers used
============================================
Used : 111 , 113 , 115 , 119 , 121 , 127 - 129 , 200 , 211 , 222
Unused: 1 - 110 , 112 , 114 , 116 - 118 , 120 , 122 - 126 , 130 - 199
201 - 210 , 212 - 221 , 223 - 4096
[Code]......
View 3 Replies
View Related
Apr 26, 2012
I want to be able to gather some time metrics based on source IP, and destination port. Is it possiable to track how much time a user spends using a service based on it's port number. I have figured out how to capture all the data, and I can then look at timestamps, but I would like a better way if possible. Can this be done at the firewall, or do I need a different appliance?
View 1 Replies
View Related
May 7, 2011
I am actually more of a 3Com guy than Cisco but I like to think I know my stuff and having just discovered this site I hope to join in as it looks a good place.I have a question about the general theroy underneath DHCP relay (IP Helper in the Cisco world I believe!)I've always put the DHCP server in VLAN1 only. A few weeks ago, I repatched the DHCP server in one of our offices (small site, single switch) into a different port by mistake. A few days ago I noticed (when doing something entirely unrelated) that I had left it in a port on both VLANs meant for PC's/phones. So, untagged on VLAN1, tagged on the voice VLAN. It had continued to work properly all that time however.By contrast, at a larger site, a new DHCP server came online and was put on a switch elsewhere in the building and was also put into a port on both VLANs - however things didn't work at all - of course we noticed immediately and changed the port setting to VLAN1 only, and it came back.In the second example, the server was on a different switch to where the main L3 switch for the Voice VLAN was (which also does the DHCP relay), and was connected over a fibre trunk link.Is there any reason why it should work on a single switch on a port on both VLANs, but not when connected over a trunk link? The server does not understand tagging. In the case where it worked, the phones were getting an IP from the correct scope; so the relay obviously must have been working with the server issuing an address based on the GIADDR field.
View 2 Replies
View Related
Mar 26, 2011
I have some tunnels which terminate to my home router. I'm allowing the other ends of the tunnels to use my voice setup. I need to prepend *67 to all called numbers which don't originate from my house. I don't want people calling my home number based on the caller-id number they see when someone across one of the tunnels calls.
So if 5008 calls 212-333-4444 I want it sent to my provider as *672123334444. If 5001 calls a number, I don't want it touched. Can I do this? I can use IOS or CUCM here.
View 13 Replies
View Related
May 27, 2012
I have two servers behind the RV180 and a list of ports I would like to open to the public (80, 443, 21, 3389).In that case, I have to setup 8 Access Rules. I am OK in the first time setting up.But later on, if I would like to change the external IP <-> internal IP mapping, I have to change the Access Rules one by one for all related ports.
Does it has a setting for grouping the ports together so that I can set the Access Rules by one time only ?BTW, the summary view of the Access Rules in RV180 is not very clear, I can't differentiate the Rules for different Destination NATs ... I have to click into the details one by one ...
View 1 Replies
View Related
Nov 30, 2012
None of the port forwarding settings are working at all on my router. I have just a couple very simple settings. One of them is just an IP camera. I input the name, the TCP port, the computer (IP address) and that's it. This works just fine with my other Netgear router, but with this router, NADA. The router has the latest version of the firmware applied. Just applied it. Hardware version B. Firmware version: 2.10NA. If so, then I really need my money back since it is a main function of a router and it should work. Can't return it now, since I bought it several months ago. Never knew port forwarding didn't work because I never needed it until now.
View 6 Replies
View Related
Dec 28, 2011
I have a pair of ASA 5510s configured in active/standby mode. I have already configured the fail over settings on the firewalls. Both firewalls are connected to a 2960G. I made a change to the interfaces on the 2960 to allow 2 mac addresses on each port. [code]
Upon testing failover via the failover active command, I get port-security errors on the outside interface for each device:%PORT_SECURITY-2- PSECURE_ VIOLATION: Security violation occurred, caused by MAC address aaaa.bbbb.cccc on port GigabitEthernet0/8. After a few minutes, the error goes away and I can then connect to each firewall. It seems that it still waits for the aging time to expire before allowing the other MAC address. Shouldn't the "maximum 2" setting allow for both mac addresses?
I'd rather not have to hardcode the firewall's MAC addresses on each switchport because I could see this causing problems for us down the road. Is there anything else that can be done?
View 1 Replies
View Related
Nov 28, 2011
i am trying to port forward my router so that i can run a minecraft server. When I put in th port number and save the changes, it brings me to a screen that says my changes have been saved yet when i go back to the page they haven't. I have tried deleting the cookies on my browser, using another browser, using another computer, and hard resetting the router for ten seconds. None of this works.
View 2 Replies
View Related
Sep 6, 2011
I did read the thread entitled ''WRT160N Can't save settings'', but I believe this might be different. My router is actually communicating with my computer (physically plugged in), since I can save all other settings EXCEPT the port-fowarding ones.I am trying to save settings for a gaming application in the Single Port Forwarding section of my router settings. After clicking both ''save settings'' and ''continue'', it simply returns to the Single Port Forwarding section, except everything is blank, as though nothing was saved.
Here are my specs:
WRT160Nv1
Firmware Version: v3.0.03
Here are the steps I have already undertaken:
1- Erase browser cache and cookies
2- Updated to latest firmware (v3.0.03), 10-second reset button, 20-second power cycle.
View 1 Replies
View Related
May 17, 2012
I forgot my network key/password
View 1 Replies
View Related
Dec 23, 2011
how can I recover my router password - forgot it netgear router
View 1 Replies
View Related
Nov 7, 2011
i have forgot my router password
View 1 Replies
View Related
Jan 26, 2013
What is my internet password?
View 1 Replies
View Related
Aug 29, 2011
forgot my wireless security key number
View 1 Replies
View Related
