Routers / Switches :: What Port Number Does Ping Use
Apr 13, 2011what port number does ping use?
View 3 Replies
ADVERTISEMENT
Routers / Switches :: Windows Ping Success But Mac Ping Fails
Aug 15, 2011When I ping an address from my windows machine, it succeeds, but when I ping to the same IP on my MAC OS X machine, it fails.
1. Why?
2. How to get successful ping on my MAC machine?
Routers / Switches :: Find Wifi Number To Add Tablet?
Feb 9, 2012How can I find my WiFi # to add tablet? I have it on my laptop, Ipod Touch, and don't want to reset # to add the tablet
View 1 Replies View RelatedCisco Routers :: Sa520w - Set The Port Number For Syslog?
Mar 19, 2011Is is possible to set the port number for syslog eg 192.168.75.50:20514 ? i presume the protocol would stay udp
View 3 Replies View RelatedCisco Switches :: ESW 520 8-port PoE Switch Cannot Ping
Jul 20, 2011I have an ESW 520 8-Port switch with a management ip address of 192.168.10.2 /24 After I reboot it, I can successfully ping it from a pc with an ip of 192.168.10.123 for about 50 consecutive times.After that, I get a "Destination host unreachable" (this icmp message is sent by my pinging pc (192.168.10.123).This obviously seems like a bug.Whenever I reboot it, it goes through the same sequence.
View 2 Replies View RelatedRouters / Switches :: Two PCs On Same Switch Unable To Ping Each Other
Jan 13, 2012I have two windows 2008 machines on vmware. I assign 10.0.0.1/8 and 10.0.0.2/8 to them. Both connected to same virtual switch. Now should these two PCs ping each other? In my case they dont ping. What i get is Repy from <ip address>: Destination host unreachable.
View 2 Replies View RelatedRouters / Switches :: Why Can't Ping Computers On Separates Subnets
May 21, 2012My new employer has asked me to determine any issues that could be causing performance issues our LAN. The network has two subnets and one of the first things that I noticed is that I cannot ping computers on subnet A from subnet B. I've looked into this and found a few things.-I CANNOT traceroute to computers on subnet B from subnet A-I CAN NMAP to computers on subnet B from subnet A-Computers on subnet A CAN ping other computers on subnet A and computers on subnet B CAN ping other computers on subnet B-Computers on subnet A CAN ping and access servers on subnet BI am relatively new to networking and not exactly sure where to start investigating this problem.
View 9 Replies View RelatedRouters / Switches :: Can Ping But Can't Access Linksys Router 192.168.1.1
Feb 25, 2011every time i try to acces my linksys router my IE just auto adds http:// and opens google search results. I cannot make IE not auto add that freaking http thing, on the old win XP i could type in 192.168.1.1 and it just went straight to my router login. Do i disable this IE auto http crap? i simply cannot acces my router anymore??i can ping the router, even using Cisco network magic pro I tried to reset router checked my internet settings everything works fine, this pc has a dhcp auto configuration etc.
View 9 Replies View RelatedCisco Routers :: SRP 527W - Ping External WAN Port?
Jan 14, 2013As a raw test it is handy for us to ping externally the WAN port of the SRP 527W. How we configure the SRP 527W to allow this? FYI we have the inbulit SRP firewall enabled.
View 2 Replies View RelatedRouters / Switches :: Ping 10.0.0.1 -t Give Destination Host Unreachable?
Mar 17, 2013ping 10.0.0.1 -t give me destination host unreachable in the same time when i wright ping 192.168.1.1 -t it give me the correct reply but the net doesnt work
View 3 Replies View RelatedRouters / Switches :: Port Only Forwards When On The Same Network?
Jan 8, 2012I have followed directions and forwarded the two ports to the local machine. I looked in the router setup to find my current public ip address from Comcast say its 98.221.99.99. If I am on the same network as the machine that is receiving the port forwards, and I type http:// 98.221.99.99 in a browser, the forwarding works fine.If I am external/not on the same network, typing http:// 98.221.99.99 in a browser times out. I have tried http:// 98.221.99.99:9000 too (9000 is the port I need forwarded) and that doesn work either.But, I do have remote management enabled for the router and if I am external/not on the same network and I enter http:// 98.221.99.99:8080 in a browser, I get the router login screen and can enter my user name and password and login to the router just fine.
View 11 Replies View RelatedRouters / Switches :: Port Forwarded But Still Blocked
Jan 6, 2013I am trying to create a server in a game called Minecraft. I have forwarded port 25565 (which I put in the server settings for incoming connections and I checked that 10 times so that is ok) on my thomson TG787. I've opened the same port on my firewall in windows 7. I've disabled my firewall completely. But it's still blocked. It's simply doesn't work..I'm 100% I fixed it on the router.
View 21 Replies View RelatedRouters / Switches :: Sky Router Port Forwarding
Feb 12, 2011I am trying to open port 12000 on my sky dlink router, been trying for a few days now and i just can't nail it. When i log into router, it brings up the sky router page, any one ever setup port 12000 on the sky router page.
View 1 Replies View RelatedRouters / Switches :: Port Forwarded But Still Blocked?
Jan 23, 2011I am trying to create a server in a game called Minecraft. I have forwarded port 25565 (which I put in the server settings for incoming connections and I checked that 10 times so that is ok) on my netgear wnd3700. I've opened the same port on my firewall in windows 7. I've disabled my firewall completely. Everything should be cool, but still, checking with canyouseeme.org and asking friends to join. It is still blocked. It simply doesn't work.. I checked my router for any firewall but couldnt see any.. So yeah I'm 100% I fixed it on the router, unless someone is gonna tell me that there is still an option in the router that might fix it.. but I think I did something wrong in the firewall..Although I have been trying to get this to work all day.. I'd rather get some advice on the firewall or other options in my router. Btw, I am using AVG free edition, and I am pretty sure there is no firewall in that version, but there might be something I have to disable in order for this to work ?
View 15 Replies View RelatedRouters / Switches :: Why Is Port Forwarding Not Open
Dec 25, 2011When checking my port forwarding, it says that it is not open.
View 2 Replies View RelatedRouters / Switches :: Netgear And Westell Port Forwarding
Feb 23, 2011I have set my Netgear WGR614 to a static IP, and I have tried port forwarding but I can't. I've tried disabling SPI Firewall and it still don't work. I have also tried enabling bridge settings on my connection in my modem settings, but that just wouldn't let me back on my internet. How I can port forward?I have a westell 610015.
View 3 Replies View RelatedRouters / Switches :: Plug A 8 Port Switch Directly?
Sep 27, 2011I have a Modem/Router combo and am trying to plug an 8 port switch directly into it and then have wireless AP's and other hardwired devices plugged into the switch. Normally, when I plug a switch into a router it requires no set up. This one on the other hand, will not work.
View 7 Replies View RelatedRouters / Switches :: Can Feed Router From A 4 Port Switch
Mar 19, 2011ISP Cable in Smart box. 4 cat 5 cables from various rooms in house to feed cable ready TV's and one from my computer room. Can I connect all cat 5's to switch that is connected to cable modem located in Smart box and connect Wireless Router to cat 5 in the computer room and expect router to work properly?
View 4 Replies View RelatedRouters / Switches :: Unable To Find Open Port
Feb 7, 2011I have just upgraded my AIM and Skype messengers and now it won't let me sign in. I did before with my old versions. It is saying that my internet connection is bad which it is not. I have looked up ports in my Yahoo messengers, Control Panel and Bit Torrent still nothing.
View 6 Replies View RelatedRouters / Switches :: Temporary Lab Setup 1 Network Port 8 PC's
Mar 21, 2011We recently moved 8 pc's from a room where they each had port on the switch to a room where there is only one port for all of them. I setup a DLINK DIR632 Router in there and they connect thru the one port thru the switch to the gateway which gets them out to the internet.The problems is I need to be able to remote desktop into these 8 PC's and I need them to be able to print to the network printer. I am using a Linksys WRT54G Broadband router as the gateway connecting the switch to the internet. The DLINK's dhcp server is on for the 8 PC's. The Linksys' dhcp server shows the DLINK as IP 192.168.1.19 on the network.I know I have to use advanced routing settings but I'm not sure about how what to make the subnet mask and IP's on both routers. I believe I need to turn off the dhcp server on the DLINK and have the Linksys' dhcp server serve all of the PC's but I'm not sure if thats the best way or if its possible.. I don't want to hack out fix only to find it breaks 3 days later.I used to do this stuff all day long in the 90's but its been a while and to me its like calculus.
View 13 Replies View RelatedRouters / Switches :: Can't Get Router Usb Port To Keep Reliable Connection
Apr 15, 2012how do I get my hard drive to work thru my belkin router usb port?
View 1 Replies View RelatedRouters / Switches :: Open A Port On A Motorola Modem?
Aug 26, 2011how do i open a port on Motorola modem
View 1 Replies View RelatedRouters / Switches :: How To Port Forward A Cisco DDR2200
Apr 2, 2011Looking to remote access my CCTV DVR, need to port forward. Set up dyndns domain already.
View 1 Replies View RelatedRouters / Switches :: Port Forwarding On Linksys WRT54G?
Nov 11, 2011Port forwarding on my linksys is not seem to be working from outside the network. It works fine if I try on the same network. External ip address: 69.117.132.xxx Ports from 8080 through 8080 forwarded Internal ip address: 192.168.1.150 - static ip address assigned to the webserver. I understand 80 could be blocked by the ISP. Can 8080 also be the same case?
View 12 Replies View RelatedRouters / Switches :: When Checking Port Forwarding - It Says Not Open
May 23, 2012When checking my port forwarding, it says that it is not open. Why?
View 6 Replies View RelatedRouters / Switches :: Port Forward With A Netgear DGN2200 V3?
Oct 9, 2012I cant work out how to get my Netgear DGN2200v3 to port forward.Portforward.com describes how to port forward for a Netgear DGN2200 but NOT for the DGN2200v3.The difference between the DGN2200 and the DGN2200v3 is that when I log into the router and go to port forwarding/port triggering there is no box to fill in the server IP address. It just says service name, service type, starting port, ending port.
View 1 Replies View RelatedRouters / Switches :: Linksys E3000 Router Will Not Forward Port 443
Dec 20, 2011I attached an Iomego Home Media network hard drive to my Linksys E3000 router (via ethernet cable). Before setting up the remote access on the Iomega, I forwarded the ports that it wanted (443 and 21) to the static IP of the Iomega. I checked to see that they were open using yougetsignal.com and they were both open. After setting up the remote access on the Iomega, the 443 port closed and I cant even get into the "manage storage device" page for the Iomega. Iomega uses TZo for the domain names. They tell me that the association is made between the name and my public IP address. My router is out of warranty since Sept, so Linksys wont give me the time of day. I contacted my ISP and while they block a couple of ports, 443 is not one of them.I've installed the latest firmware (1.0.04 - Build 6). Reset and rebooted numerous times, Port 443 remains closed.
View 8 Replies View RelatedRouters / Switches :: Port Range Overlap With Remote Manage?
Jan 20, 2011I am trying to Port Forward HTTP: 80, but my Router wont let me and it keep giving me this error message Status: Port Range Overlap with Remote Management.I have a NETGEAR CG814GCMR Router, I need to add that port for setting up a Game private server online, but my router wont let me, how to fix it?
View 12 Replies View RelatedRouters / Switches :: Port Forwarded But Still Says Blocked On Checking Sites?
Apr 6, 2012i have been trying to forward port 25565 for a server on a game called minecraft. I have a bt homehub 2 and i have followed everything on portforward.com and on several videos and still no luck. I have B.T net protect plus so I don't know if the firewall is blocking the port
View 1 Replies View RelatedRouters / Switches :: Trunk Port Connecting But Network Tree Not Available On Pc
Jun 26, 2012trunk port connecting but not allowing access to tree; i connected 4506 port to 3550 port; and i set both to switchport mode dynamic desirable; the 4506 port was set with switchport mode access and switchport mode access vlan ?; i used the command default switchport access vlan to remove the vlan; the ports are up but as I stated I cannot connect ot our workgroup tree
View 4 Replies View RelatedRouters / Switches :: Isolate 1841 Router Fast Ethernet Port?
Feb 4, 2011I have a Cisco 1841 router with the followingSerial T1 connection Fastethernet 1 with network address 192.168.0.1 Fastethernet 2 with network address 198.168.0.1I want to isolate Fastethernet 2 so that it cannot access the internet or the 192.168.0.1 network. Only incoming request is available.
View 5 Replies View RelatedRouters / Switches :: Quad Port Nic Server - Sharing Data Load
Jun 29, 2012We have a quad port NIC on our Dell server.I want to take all 4 ports and plug it into our switch and have it all go to the same IP of the server and just have to share the data load in/out.Do I need to configure anything to do this?
View 6 Replies View RelatedRouters / Switches :: Port Forward On A SAGEMCOM SE567 Router To Be Able To View DVR?
Jun 12, 2011How do I port forward on a SAGEMCOM SE567 router to be able to view my DVR from a remote location?
View 3 Replies View Related