Routers / Switches :: Quad Port Nic Server - Sharing Data Load

Jun 29, 2012

We have a quad port NIC on our Dell server.I want to take all 4 ports and plug it into our switch and have it all go to the same IP of the server and just have to share the data load in/out.Do I need to configure anything to do this?

View 6 Replies


ADVERTISEMENT

Dell PN YT674 - Intel PRO / 1000 VT Quad Port Gigabit Server 2012 Driver

Jun 4, 2013

This is a Dell PN YT674. I can't find a freaking Server 2012 driver for it anywhere.

View 3 Replies View Related

Unable To Load Webpage Because Server Sent No Data

Apr 4, 2012

I did nothing different to my computer. It was online fine and then an hour later when I came back, it wouldn't load any pages. I have a DSL modem and a wireless router that also connects another family member's desktop to the Internet. (As well as our phones via wifi.). The connection is fine on the other PC through a wireless adapter (both are desktops), and on the wifi the phones work perfectly so I know the modem and router aren't the problem. But even though my desktop says it's connected (not wirelessly, it directly connects to the router.), no pages will load. If I use chrome browser it eventually tells me this webpage is not available regardless of which page I try to load, or sometimes it's telling me no data received - unable to load the webpage because the server sent no data. Yet oddly a couple of times after forever it seemed to half load a couple pages. Internet Explorer just keeps trying to load pages forever with blank white page as a result.

View 10 Replies View Related

Cisco Switches :: SG 200-26 Double Gbit Port Configured In Load Balancing And Failover

Sep 21, 2011

I've a network with 28 computers and 2 servers. Each server have a double Gbit port configured in Load Balancing & Fail Over.Now, I want to buy two Cisco's Switch SG 200-26 and I would know the best way to connect them and if it's possible to interconnect them with more than one cable to share the trafic.
 
1. Is this following solution a good one (does the link between swhitches will work when computers will access to servers) ?

2. Is this next solution possible ?

View 3 Replies View Related

Routers / Switches :: RSTP Status Is Flapping With Broadcast Data?

Mar 16, 2011

RSTP port role in the switches are flapping if broadcast data is flowing through the ring. Also I've tried applying broadcast suppression to all the port to 64kbps for ports of 100Mbps/1Gbps, All the devices I'm using are L2 switches.

View 1 Replies View Related

Routers / Switches :: Router Network Not Load Certain Websites

Mar 11, 2011

For some time now, I haven't been able to connect to websites from one.com, from my personal network.I've had full access to all those sites before and the only change I've made myself, is changing the standard internet browser from IE to Firefox.At first I thought the problem was on my desktop Win7 computer (which uses a network cable), but after testing the sites on my macbook, with a wireless connection, and having the same issue.

View 4 Replies View Related

Routers / Switches :: 192.168.1.1 Doesn't Load Router Options

Apr 27, 2012

I type it into google and it just loads normal search options. We have a Thompson Reuter. I am trying to get an open Nat type for xbox live but nothing is working right.

View 3 Replies View Related

Routers / Switches :: Sharing Across Two Networks In Same Office

Aug 6, 2011

My workplace currently has one AD Forest. Slowly we have drifted in to two slightly separate businesses and my boss wants us to create a new AD Forest and segregate the users doing each business. Although we will all be in the same office, each side will authenticate to a different DC. The problem is, that we have some resources that still need to be shared and I would like to share them as eloquently as possible without converging the networks too much. The two networks will be in the same server rack but they will logically appear as this:Forest1.local (original)

-Cable Internet -- Router A (192.168.1.x) -- 48-port switch A -- PC/Phones/Domain Controller AForest2.local (new)

-Cable Internet -- Router B (10.1.1.x) -- 48-port switch B -- PC/Phones/Domain Controller B.

The problem I have is that the users in the "new" network need access to a shared folder, shared customer DB, and shared printers on the original Domain Controller, named "DC A" above. I have complete control over both networks but cant figure it out the best way.My main concern is physical access between the networks. How will a pc on the 10.1.1.x network know where printer 192.168.1.2 is? I thought about creating a forest trust in order to assign proper permission but how will they resolve the names on a different subnets? The two "routers" are just simple SOHO type routers so I cant do much there. I thought about connecting the two switches together but don't know if that would work. Wouldn't the data just get passed to the default gateway (router) anyway. The router would then just drop it. I also though about using the 2nd NIC in each DC and connecting them in each other's subnet. But again Im not sure if it matters if the DC's can reach each other or if the PC's would have to be able to reach the other subnet etc. I also thought about just creating some kind of VPN (hamagachi) or whatever to go out into the internet then back into the other router to the network.The problem is wouldnt every computer wanting to access the shared folder have to have this setup. I would like to limit setting things up on workstations and just limit config to the DC's if possible.I basically just want users in subnet two to be able to map a drive and access printers on DC in subnet one.

View 3 Replies View Related

Sharing :: Data Sharing Between Two Different Networks In A PC

Jun 21, 2012

I have two network card in my server and they are connected with different network and we are sharing data between them, but i dont know how, how to transfer data between these two different network.

View 4 Replies View Related

Routers / Switches :: How To Start Network Sharing System

Jun 29, 2011

me and my cousins have bought a router and we want to start a network sharing system

View 1 Replies View Related

Cisco Switches :: SF300-24P / Configure Vlan 10 For Data And Vlan 20 For Voice On The Same Port?

May 12, 2011

We are trying to config vlan 10 for data and vlan 20 for voice on the same port - port 1 of swtich SF300-24P to run both data and voice on different vlans.Do I have to add vlan 10 as an untagged vlan to port 1 and add vlan 20 as an tagged vlan to port 1?If I do not want to assign the native vlan 1 to port 1, how can I remove it ? The GUI page - assign VLAN to port does not allow to remove it.Aslo, what mode shall I set up on port 1? General, trunk or access ?

View 18 Replies View Related

How To Trace The Load Balancers In Data Center

Feb 22, 2012

How to trace firewall and load balancers placed in data center.

View 6 Replies View Related

How Much Load (DATA) Cat-6 Cable Can Handle Over A Length Of 100 Meters

Mar 1, 2012

How much load (DATA) cat-6 cable can handle over a length of 100 meters?

View 2 Replies View Related

Role Of Internet In Data Sharing?

Jan 19, 2012

How does the Internet play a role in data sharing?

View 1 Replies View Related

Cisco Switching/Routing :: 3750s Port Channel Between Server And 2 Different Switches

Jan 27, 2013

Here's what I'm trying to do.  We are having new storage servers installed that will be using NFS.  I'm being told that they need to have their connections port channeled.  Right now, the servers have connections to 2 different 3750s for HA. Is it possible to configure a port channel between these 2 connections?

View 4 Replies View Related

Cisco Switches :: Configure SF300 48 Port Switch As DHCP Server?

Aug 23, 2011

How to configure SF300 48port switch as DHCP Server or not.
 
My Configuration as below
 
I have 8 vlan configure in SF300  (SVI with ip address)isit possible to configure dhcp server and how i can apply access-list to restrict with other vlans.

View 1 Replies View Related

Sharing :: Use 1 External Hdd To Backup Data From 2 Separate PC's?

Jan 20, 2011

I have got a 1TB external HDD...I want to use this to backup my data (dokuments , pics , video) that are on 2 desktops and one laptop---

AS I understand the terminology a I won't have enough room to do image backups (these back up all info incl OS ??) as on pc is usingb 677 gb and the other 400 gb ---- and anyway I can re-install windows if anything goes wrong...

SO---am I able to do this-

1. connect the ext- HDD to PC running win 7 64 bit....create a folder called "win 7 64 bit" and then drag and drop filesand folders into that folder(or use windows backup..which i am unfamilar with)

2. then connect to PC running Vista 64 bit ..create a f�lder called "Vista 64 bit" and do as above....

3. Do the same for the laptop running win 7 32 bit

Am I right in assumming that because it's just data I can put info from different OS on to it without and conflicts when connecting it to different Pc's?

View 7 Replies View Related

Routers / Switches :: Can't Log On To Server With Pc

May 8, 2011

I no longer have my netwk admin and i moved the server to my residence and i also have the pcs that logged on.i booted the servers up and connected the pcs using a router but can't log on im using a verizon wireless router can i get rid of that since i dont want to have it on the internet.

View 1 Replies View Related

Home Network :: How To Manage Data Sharing In A Little Intranet On Windows

Mar 10, 2012

I should set up a network for a little enterprise.The requirements can be summarized as follows:

- All the "business" softwares have to be stored in a single computer (let's call it "the server"). The other computers (in this case there should be at most 2 or 3 computers) can execute these softwares through the server. So there are no local copies of those softwares on clients, only on the server.
- The main computer (the server) shares also a printer.
- All the computers in the network, are interconnected through a single wi-fi modem/router. Some of them are connected through the wi-fi interface and others through an ethernet cable.

the server, in order to perform some special procedures, has to connect to a special modem which connects it to a remote private network. In order to do so, the server disconnects from the local enterprise network because Windows does not allow me to stay connected to more than one network at the same time.The remote private network does not require to disconnect from any other network, it's just a constraint imposed by Windows.In the meantime, clients are not able to execute softwares anymore and cannot print anything.when the server is connected to the private network, it still needs to execute the "business" softwares.

Is it possible to keep the server connected to both the networks without denying the access to softwares, data and printers to anyone? If yes, how?If not, how can I design the topology of the network in order to share softwares and other data among all the computers (server and clients)? It's important that when the server connects to the private network every computer (including the server itself) can still access softwares, data and printers.

View 1 Replies View Related

Controlling The Data Flow And File Sharing Between Computers Is Slow?

Aug 14, 2011

I have 2 computers in my room which between them i very frequently share files between. Wirelessly they were both connected to my home's router until recently the router was removed, but will be back soon.The problem though, was that with using the router, file sharing between those computers was slow, and with the router gone, I was lost because there was no movement of data between the computers whatsoever, I had no crossover cable, but plenty of regular ethernet cable. Than I remembered something about gigabit lan not needing crossovers(both of the computers being gigabit) and I connected them, and marveled at the new way to share files. And more by the exponential boost in speed(800kb/s to a grand 12mb/s{though I still think that is slow for gigabit.}). Obviously I've overcome a problem, but that's not where this story ends, it comes with another problem. When the router is reconnected to these computers, will the files still transfer through there new found direct connection? or will it attempt to go through the router, only allowing me to get the speeds I want when one of these computers isn't connected to the router?

View 11 Replies View Related

Routers / Switches :: Port Only Forwards When On The Same Network?

Jan 8, 2012

I have followed directions and forwarded the two ports to the local machine. I looked in the router setup to find my current public ip address from Comcast say its 98.221.99.99. If I am on the same network as the machine that is receiving the port forwards, and I type http:// 98.221.99.99 in a browser, the forwarding works fine.If I am external/not on the same network, typing http:// 98.221.99.99 in a browser times out. I have tried http:// 98.221.99.99:9000 too (9000 is the port I need forwarded) and that doesn work either.But, I do have remote management enabled for the router and if I am external/not on the same network and I enter http:// 98.221.99.99:8080 in a browser, I get the router login screen and can enter my user name and password and login to the router just fine.

View 11 Replies View Related

Routers / Switches :: Port Forwarded But Still Blocked

Jan 6, 2013

I am trying to create a server in a game called Minecraft. I have forwarded port 25565 (which I put in the server settings for incoming connections and I checked that 10 times so that is ok) on my thomson TG787. I've opened the same port on my firewall in windows 7. I've disabled my firewall completely. But it's still blocked. It's simply doesn't work..I'm 100% I fixed it on the router.

View 21 Replies View Related

Routers / Switches :: Sky Router Port Forwarding

Feb 12, 2011

I am trying to open port 12000 on my sky dlink router, been trying for a few days now and i just can't nail it. When i log into router, it brings up the sky router page, any one ever setup port 12000 on the sky router page.

View 1 Replies View Related

Routers / Switches :: What Port Number Does Ping Use

Apr 13, 2011

what port number does ping use?

View 3 Replies View Related

Routers / Switches :: Port Forwarded But Still Blocked?

Jan 23, 2011

I am trying to create a server in a game called Minecraft. I have forwarded port 25565 (which I put in the server settings for incoming connections and I checked that 10 times so that is ok) on my netgear wnd3700. I've opened the same port on my firewall in windows 7. I've disabled my firewall completely. Everything should be cool, but still, checking with canyouseeme.org and asking friends to join. It is still blocked. It simply doesn't work.. I checked my router for any firewall but couldnt see any.. So yeah I'm 100% I fixed it on the router, unless someone is gonna tell me that there is still an option in the router that might fix it.. but I think I did something wrong in the firewall..Although I have been trying to get this to work all day.. I'd rather get some advice on the firewall or other options in my router. Btw, I am using AVG free edition, and I am pretty sure there is no firewall in that version, but there might be something I have to disable in order for this to work ?

View 15 Replies View Related

Routers / Switches :: Why Is Port Forwarding Not Open

Dec 25, 2011

When checking my port forwarding, it says that it is not open.

View 2 Replies View Related

Routers / Switches :: Primary DNS Server Is Not Responding?

Jun 19, 2012

I got an internet from provider (which is LAN cable sticking from the wall) - and it works fine when I connect via LAN cable - when I write the IP Address, Subnet Mask, Default Gateway, and DNS servers on the LAN adapter and create a PPPoE connection with username and password. I want to do the same but wirelessly. I have an ASUS RT-N10 LX wi-fi router - and connected the cable from the provider to the WAN slot on the router. Then I have accessed the router from my laptop [URL] - and configured everything as it was on my laptop.

IP Adddress: 192.168.17.191
Submask: 255.255.252.0
Default Gateway: 192.168.16.1
DNS1: 192.168.1.250
DNS1: 192.168.1.10

Wireless network works fine, the default gateway is pinging - but DNS servers are not accessible. As a result no internet connection available ( Moreover - when I want to ping the DNS (ping 192.168.1.250) - I tries to get a response from other location 192.168.1.3

View 9 Replies View Related

Routers / Switches :: How To Set Server 2008 R2 On A Lan Of 12 Computers

Jan 17, 2011

We need internet connectivity on all workstations

View 1 Replies View Related

Cisco WAN :: 6500 Per-Packet Load Sharing?

Aug 6, 2012

Does Cisco 6500 with Sup 720 3BXL sipports per-packet load sharing amogn interfaces? CLI shows only per-destination is supported.

View 1 Replies View Related

Cisco WAN :: Per Packet Load Sharing On 7600

Apr 14, 2011

How to activate "per-packet load sharing" on a 7606S with RSP720-3CXL engine and 7600-ES+20G3CXL module. The IOS version is : 7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRD4, RELEASE SOFTWARE (fc2)
 
I tried the two (2) following commands but they are not supported :-

hw-module slot1 ip load-sharing per-packet
- ip load-sharing per-packet (on interface)

View 1 Replies View Related

Routers / Switches :: Netgear And Westell Port Forwarding

Feb 23, 2011

I have set my Netgear WGR614 to a static IP, and I have tried port forwarding but I can't. I've tried disabling SPI Firewall and it still don't work. I have also tried enabling bridge settings on my connection in my modem settings, but that just wouldn't let me back on my internet. How I can port forward?I have a westell 610015.

View 3 Replies View Related

Routers / Switches :: Plug A 8 Port Switch Directly?

Sep 27, 2011

I have a Modem/Router combo and am trying to plug an 8 port switch directly into it and then have wireless AP's and other hardwired devices plugged into the switch. Normally, when I plug a switch into a router it requires no set up. This one on the other hand, will not work.

View 7 Replies View Related

Routers / Switches :: Can Feed Router From A 4 Port Switch

Mar 19, 2011

ISP Cable in Smart box. 4 cat 5 cables from various rooms in house to feed cable ready TV's and one from my computer room. Can I connect all cat 5's to switch that is connected to cable modem located in Smart box and connect Wireless Router to cat 5 in the computer room and expect router to work properly?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved