Routers / Switches :: Can Ping But Can't Access Linksys Router 192.168.1.1
Feb 25, 2011
every time i try to acces my linksys router my IE just auto adds http:// and opens google search results. I cannot make IE not auto add that freaking http thing, on the old win XP i could type in 192.168.1.1 and it just went straight to my router login. Do i disable this IE auto http crap? i simply cannot acces my router anymore??i can ping the router, even using Cisco network magic pro I tried to reset router checked my internet settings everything works fine, this pc has a dhcp auto configuration etc.
View 9 Replies
ADVERTISEMENT
Aug 15, 2011
When I ping an address from my windows machine, it succeeds, but when I ping to the same IP on my MAC OS X machine, it fails.
1. Why?
2. How to get successful ping on my MAC machine?
View 1 Replies
View Related
Mar 29, 2013
I have windows 7 could this be the problem? it is unsecure and I have access the security part of it
View 1 Replies
View Related
Jan 13, 2012
I have two windows 2008 machines on vmware. I assign 10.0.0.1/8 and 10.0.0.2/8 to them. Both connected to same virtual switch. Now should these two PCs ping each other? In my case they dont ping. What i get is Repy from <ip address>: Destination host unreachable.
View 2 Replies
View Related
Apr 13, 2011
what port number does ping use?
View 3 Replies
View Related
May 21, 2012
My new employer has asked me to determine any issues that could be causing performance issues our LAN. The network has two subnets and one of the first things that I noticed is that I cannot ping computers on subnet A from subnet B. I've looked into this and found a few things.-I CANNOT traceroute to computers on subnet B from subnet A-I CAN NMAP to computers on subnet B from subnet A-Computers on subnet A CAN ping other computers on subnet A and computers on subnet B CAN ping other computers on subnet B-Computers on subnet A CAN ping and access servers on subnet BI am relatively new to networking and not exactly sure where to start investigating this problem.
View 9 Replies
View Related
Mar 17, 2013
ping 10.0.0.1 -t give me destination host unreachable in the same time when i wright ping 192.168.1.1 -t it give me the correct reply but the net doesnt work
View 3 Replies
View Related
Mar 25, 2012
How can I access this router?
View 2 Replies
View Related
Mar 28, 2013
i am trying to access my 02 router to access my cctv but my router will not allow remote access.
View 2 Replies
View Related
Oct 20, 2012
I have High Speed Charter Internet going to a modem in form of coaxial cable with one Ethernet port available and one coaxial connection for TV and a phone jack. I have that Ethernet port connected to a:Motorola Wireless Modem[CODE]
View 4 Replies
View Related
Feb 3, 2013
Lost connection to Internet though router appears normal. Belkin router, MacBook.
View 1 Replies
View Related
Sep 7, 2011
Can I have a wireless access point connected, by wire, to say 2 PCs and a wireless router connected to the internet (+ other PCs) and the link between the access point and router is wireless (i.e. not wired)
View 1 Replies
View Related
Apr 29, 2011
I try to access my router web page with a correct address (192.168.1.1) but on my computer i have this message {Network Error (tcp_error)} but i can access this page from another computer through the network (WHY)
View 1 Replies
View Related
Jan 3, 2012
I have a Cisco 678 connected to my ISP (Qwest) using DHCP. This is connected to a Linksys WRT54g router. I also have a home server running for remote access to some files and media streaming. I just installed security cameras that I wish to monitor remotely via the internet.I can access my home files over the internet with no issue. However I am unable to access my cameras using the internet. Looking at my router incoming log, I see my request arriving, but I never get to the DVR attached to the camereas for remote viewing.I enabled bridging on the Cisco 678 but this did not solve the issue.
View 1 Replies
View Related
Nov 5, 2011
i have a LAN network between several pc's connected with several switch's and connected to Thomson SpeedTouch 510 DSL Router its ip address is 10.0.0.100 subnet 255.0.0.0 and the router dont give auto ip to the PCs i have to issign it manually to the PCs "static ip".I bought the acer android recently so i bought a tp-link td-w8901g wireless router to act as an access point so i connected the 2 routers to each other by LAN and gave the tp-link an ip address 10.0.0.12 subnet mask 255.0.0.0 so it will be the same ip range of the speedtouch and setuped the tp-link router to fit my isp configeration it worked at first but i had to reset the router so i did the same configuration i did before but didnt work and i cant access the internet using the android or the wireless but when i connect the phone to the tp-link and unplug the speedtouch the wireless works so theres no any problem with the router?
View 1 Replies
View Related
Mar 13, 2011
I have high-speed cable access currently coming into an older D-Link 4-port wired router. I need to buy a new wired and wireless router so I can sync my new Android 4G phone (I'm in an area with bad cell coverage but I can sync with wi-fi). I have a second house about 200 feet from mine and have 3 Cat5E lines running underground in conduit to it so the lady next door and and her two kids can use the internet (I have 40-50mb service for my business use at home). Problem is that my kids have discovered YouTube, streaming video, video chat, etc. and are burning up my bandwidth. I currently have two of the lines to them disconnected so that I can limit their use to one computer at a time. I'm considering having them buy a Wireless Access Point, can they connect it to the standard single Cat5E LAN wire that is coming from my new wired and wireless router when I buy it?
View 2 Replies
View Related
Jan 4, 2011
I am using the default configuration at this point. I just connected 1 computer using the default IP with DHCP on the RV042 router. 192.168.1.0/255.255.255.0.I connect my wildblue satalite modem using a static IP address 75.106.203.xxx / 255.255.252.0 I can ping the RV042 router and the static IP address of the wildblue router but I can't ping the gateway on the wildblue side. Either from the PC or the Router diag tools.
View 1 Replies
View Related
Oct 23, 2012
I purchased Linksys (Cisco) EA2700. For the moment it is being used as an access point for a wireless network (WLAN) and an Ethernet switch. 4 laptops are being connected to it through the wireless network, the wire connects one computer and a separate ADSL modem (it is used for accessing Internet). As a result minimal ping to any of the devices in wireless network is 8 ms – the best result and sometimes rises to 20 ms. Consequently when working with local network resources one suffers from speed decrease. Ping to the access point through the wire varies from 1 to 8 ms. These delays are quite strange as even on cheaper routers ping does not rise above 2 ms (usually <1ms). Is it normal for the device?
View 9 Replies
View Related
Nov 17, 2012
I have a WRT54G that has worked fine for years, with some PCs hooked up with Ethernet and various other devices connected wirelessly. I came home this afternoon and nothing going through the router could connect to the internet. I've made no changes to anything recently.
I did troubleshooting with Comcast, and we determined that when their modem was hooked up directly to my computer then that computer could connect to the net. Problem solved as far as they are concerned--my router is busted. But I can still connect to the router, and enter its admin screen, and everything looks fine there. The computers on the router can all see each other. So the router is working.
Once I hooked it back up to the modem my computers all lost their internet, but the router does get an IP successfully from Comcast. And it even assigns IPs to my computers that are hooked up to it. It's just that for some reason they still cannot get past the router.I used the ping function in the router admin site and the router pinged Google no problem. My PCs can ping the router without difficulty. But the computers cannot ping Google.
I've tried every combination of power cycles and reboots you can name. I've tried duplicating the MAC address of the PC that connected to the internet onto my router. None of it has made any difference.
View 5 Replies
View Related
Jan 3, 2012
I have a DI-604 D-link router, is it necessay to upgrade to newer router to get faster access to internet? Upgrade Firmware? I have a PD950 processor with Win XP pro and use it for DAYTRADING streaming data and fast executions.
View 5 Replies
View Related
Jan 7, 2013
to enable UPNP on a Virgin Media Super Hub, I have tried using both the IP addresses provided by Virgin media (192.168.0.1 and 192.168.100.1) but regardless of which browser I use the page constantly fails to load.
View 2 Replies
View Related
Jan 11, 2013
I just switched over from AT&T Uverse to time Warner cable for Internet. I bought a Motorola Surfboard sbg6580. I have the surfboard hooked up and all is well. Now I would like to do in put the old 2wire from AT&T in a room upstairs and use it as place I can plug in the Ethernet cords and also transmit another signal. I have what's a called plug link that is plugged in down stairs and then another upstairs and it allows the Internet signal to run through the power lines. So it just about the equivalent of running a cord for down stairs to upstairs. So basically I just need to plug more then 1 thing upstairs that isn't wireless and I would also like to transmit a 2.4ghz signal upstairs and use my Motorola to transmit a 5ghz.How would I set up the 2wire to do this.
View 3 Replies
View Related
Apr 16, 2013
I have a RVS4000 and I would like to setup a Ping monitoring from the outside to a device behind RVS on lan network. I have created a rule to allow a service PING for range from WAN 46.xxx.xxx.xxx - 46.xxx.xxx.xxx to host 192.xxx.xxx.xxx but unfortunately this is not working. I can confirm that I can ping host 192.xxx.xxx.xxx from diagnostics on RVS.
View 2 Replies
View Related
Apr 2, 2011
cannot get acess to router to put a password with 192.168.1.1 and my default gateway showing 2002:c058:6301::c058:6301
View 11 Replies
View Related
Sep 13, 2012
how do i find the wps on my linksys router
View 4 Replies
View Related
Nov 29, 2012
I typed in my web browser 192.168.1.1 and comes up user name and password. after I type in Admin and admin kicks me back out to user name and password. I have reset the router per instructions and still doesn't work.
View 6 Replies
View Related
Mar 21, 2011
I have Qwest router on 192.168.0.1 but my linksys router is hardwired to that router to provide a stronger signal throughout the house. I can't get to the 192.168.1.1 page through the internet. I need to configue the linksys router. Specifically to forward some ports to/for the XBox360 or at least make sure Upnp is enabled.
View 1 Replies
View Related
Mar 7, 2011
I have a Linksys WRT54GS router that is giving my some trouble. I recently got a new PC and moved my old one into my bedroom along with my Xbox 360. So I didn't have to switch my Ethernet cable between my xbox and pc I bought another cable. Much to my dismay this new cable would not work. At first I thought maybe the cable was bad, but when I connect my pc directly into my modem it works fine. This had my come to the conclusion that it was my router. I have two pcs hooked into it that work fine and a laptop that connects to it wirelessly, but if I try to hook my xbox or pc to it using the new cable they just act as if there isn't a cable connected. When I look at my router the light for the ethernet port that the new cable is in will flash on and off. I've hard reset my router and updated the firmware.
View 2 Replies
View Related
Dec 26, 2011
I need to retrieve my password for the linksys router wrt54g
View 1 Replies
View Related
Apr 12, 2011
ive been having a problem with my router since ive been using it for its wireless capabilities. it is a linksys wrt120n router. our internet comes from our local cable provider and it is good internet (10Mb download speed). running to our old router that split the connection between my xbox and our desktop computer worked fine and even for a large amout of time after i switched to this wrt120n there were no internet problems. now all of a sudden the router drops connection multiple times a day which can become a hassle when i'm doing something importaant and lose connection. and just a little bit of extra information i cycle the systems every time it does it and theres no fix.
View 1 Replies
View Related
Jul 6, 2012
After a power failure nothing could connect to the internet anymore. I called MTS (ISP provider) and they had me change some setup on my PC. Now my PC connects to the internet, but nothing else will connect (X Box, WII, iPods, Laptop). They were connected wireless before the power outage through my router. MTS said they are only responsible for ensuring their model works, not routers.I have checked some router settings. It is set for DHCP with 50 users.
View 15 Replies
View Related
Dec 20, 2011
I attached an Iomego Home Media network hard drive to my Linksys E3000 router (via ethernet cable). Before setting up the remote access on the Iomega, I forwarded the ports that it wanted (443 and 21) to the static IP of the Iomega. I checked to see that they were open using yougetsignal.com and they were both open. After setting up the remote access on the Iomega, the 443 port closed and I cant even get into the "manage storage device" page for the Iomega. Iomega uses TZo for the domain names. They tell me that the association is made between the name and my public IP address. My router is out of warranty since Sept, so Linksys wont give me the time of day. I contacted my ISP and while they block a couple of ports, 443 is not one of them.I've installed the latest firmware (1.0.04 - Build 6). Reset and rebooted numerous times, Port 443 remains closed.
View 8 Replies
View Related
Jan 27, 2012
My ISP insists that in order for me to have a home network use their router/modem ("2-Wire") for internet access, I must make my own network router act as a bridge since their modem is acting as the router. I.e. she said put your router into bridge mode. I don't know how to do that and Linksys won't offer assistance.
View 6 Replies
View Related
