Routers / Switches :: Temporary Lab Setup 1 Network Port 8 PC's

Mar 21, 2011

We recently moved 8 pc's from a room where they each had port on the switch to a room where there is only one port for all of them. I setup a DLINK DIR632 Router in there and they connect thru the one port thru the switch to the gateway which gets them out to the internet.The problems is I need to be able to remote desktop into these 8 PC's and I need them to be able to print to the network printer. I am using a Linksys WRT54G Broadband router as the gateway connecting the switch to the internet. The DLINK's dhcp server is on for the 8 PC's. The Linksys' dhcp server shows the DLINK as IP 192.168.1.19 on the network.I know I have to use advanced routing settings but I'm not sure about how what to make the subnet mask and IP's on both routers. I believe I need to turn off the dhcp server on the DLINK and have the Linksys' dhcp server serve all of the PC's but I'm not sure if thats the best way or if its possible.. I don't want to hack out fix only to find it breaks 3 days later.I used to do this stuff all day long in the 90's but its been a while and to me its like calculus.

View 13 Replies


ADVERTISEMENT

Routers / Switches :: Setup An Home Network With A Wireless Router And Use Multiple Switches?

Jan 29, 2011

I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.

View 3 Replies View Related

Routers / Switches :: Setup A Vlan To Access Internet Not Network?

Nov 7, 2011

I have a Dell switch setup with 2 Vlan's. Vlan 1 is to the network. Vlan 20 is going to be for wireless access to the internet. How do I configure the switch/router so that Vlan 20 only connects to the internet and not the network? I will later want to have a 2nd SSID that I want to connect to both the internet and network.

View 5 Replies View Related

Routers / Switches :: Wireless Network Setup - Configuring Linksys Router

Sep 18, 2011

I am following instructions I found to set up my wirelss network, but am having trouble configuring my router. I'm specifically at a standstill, because I can't connect to http://192.168.1.1. I pinged the router and got a response and went to run/ip config to confirm I have the right URL for the router, but still not able to get to the URL.

View 1 Replies View Related

Routers / Switches :: Port Only Forwards When On The Same Network?

Jan 8, 2012

I have followed directions and forwarded the two ports to the local machine. I looked in the router setup to find my current public ip address from Comcast say its 98.221.99.99. If I am on the same network as the machine that is receiving the port forwards, and I type http:// 98.221.99.99 in a browser, the forwarding works fine.If I am external/not on the same network, typing http:// 98.221.99.99 in a browser times out. I have tried http:// 98.221.99.99:9000 too (9000 is the port I need forwarded) and that doesn work either.But, I do have remote management enabled for the router and if I am external/not on the same network and I enter http:// 98.221.99.99:8080 in a browser, I get the router login screen and can enter my user name and password and login to the router just fine.

View 11 Replies View Related

Routers / Switches :: Trunk Port Connecting But Network Tree Not Available On Pc

Jun 26, 2012

trunk port connecting but not allowing access to tree; i connected 4506 port to 3550 port; and i set both to switchport mode dynamic desirable; the 4506 port was set with switchport mode access and switchport mode access vlan ?; i used the command default switchport access vlan to remove the vlan; the ports are up but as I stated I cannot connect ot our workgroup tree

View 4 Replies View Related

Routers / Switches :: LAN Setup For 3 Different Office Locations?

Jun 28, 2011

I have 3 different office location and I need to set up a LAN so that all three are connected and can share info?

View 1 Replies View Related

Routers / Switches :: Setup Multiple Public IP's?

Apr 7, 2011

At my company, we lease 3 static public IP addresses from 1 ISP. We want to have 3 separate networks that each use one of the IP addresses. Network 1 is the computer network, network 2 is the VOIP network, and network 3 is the security camera network. I am trying to determine the best way to do this. I have come up with 2 solutions in my head, but I'm not sure if they will work or not. I would like to get some input. Solution 1:Solution 1 looks something like this. Fiber box -> Router-> 3 switches. There would be one WAN input on the router, that would have a static route to 3 different LAN ports. For example, address 24.244.208.101 would be assigned to LAN port 1, 24.244.208.102 would be assigned to LAN port 2, and 24.244.208.103 would be assigned to LAN port 3 (by assigned, I mean have a static route to it). Is there some type of router that is capable of doing this? Solution 2:Solution 2 looks something like this. Fiber box -> Switch -> 3 Routers. The ethernet cable would run from the Fiber Box to a switch, and then 3 routers would be plugged into the switch. Each router would have the Static information configured in them. Would both of these methods work? If so, which would be the best way to go?

View 2 Replies View Related

Routers / Switches :: How To Setup Cisco 2900

Feb 17, 2011

We are in the process of switching to a new internet provider in our office and have run into some problems. Our old setup was with AT&T, where they provided a managed router which linked to our internal switch and also provided NAT to the internal IP of our email server.Our new setup right now is just the internet coming in through a cable connected to a switch, we were told we needed to provide our own router. Someone donated a Cisco 2900.What should our proper set-up be? Should the internet come in directly to the router and then to our switch, or should it go to the switch they provided, then the router, and then our switch?Also, there seems to be some confusion about whether or not we need anything else to get the internet to work. There are slots for network cards in the router. Does it come with at least one built in we can use, or do we need to provide one?

View 1 Replies View Related

Routers / Switches :: Did A Recovery And IE6 Page Won't Setup

Mar 13, 2011

I did RECOVERY on my computer. Its a Compac Windows XP Home edition. This computer runs off of my main computer by a router & adapter. My router & adaptor are showing green but the Internet is showing red. Its becuz my high speed Internat service is ATT.my.yahoo.com. which comes through IE. On my newer computer all is fine. My IE works good & all is working. but my IE on my older one which runs with the router wont set up.

View 1 Replies View Related

Routers / Switches :: How To Setup A LAN Connection Properly

Jul 1, 2011

I Have a Computer Ready for setup as a Server in the LAN Connection:

Windows 7 Professional.

Another 2 Computers for LAN Connection:

1st Computer is a Windows 7 Professional (Connect as LAN)

2nd Computer is also Windows 7 Professional (Must connect using a Wifi D-Link)

Another 2 Computer for LAN Connection:

Windows XP: Must Connect Using LAN port.

1 Computer:

Windows 7 Home Edition: Must Connect Using LAN port

2 Laptops:

1st Laptop is using Windows 7 Ultimate.

2nd Laptop is a Vista.

How to Connect these Computers to the above mentioned computer ready for setup as as Server?

View 1 Replies View Related

Routers / Switches :: Networking Setup With DLink DL-604

Apr 8, 2011

I had this small internet cafe with 15 units pc. and browsing the web is not that stable. i have to unplug the internet modem everytime i can't connect to the internet.I think it has something to do with the settings that was in the router since it was just configured by a tech guy which i think not 100% sure of what he did, though it can connect to net for sometime but most of the time it is down.

View 5 Replies View Related

Routers / Switches :: Basic Networking Setup For More Than 40 PCs

Jul 23, 2011

How to set up more than 40 pc's with out internet connection using linksys switch.

View 3 Replies View Related

Routers / Switches :: Manage Static IPS In VOIP Setup?

Jul 21, 2011

I have VOIP and was provided a modem, a Tilgen Router (Vood 452_A). I also currently have a Linksys WRT54G router. I also have a home surveillance system with a DVR that can be accessed via the net. I am trying to allow the ports to open so that traffic can navigate down to the DVR.My IPs:My VOIP has provided me with 6 static IP addresses. For sake of this issue they are:

67.xx.xxx.153, through .158My subnetmask is set to:

255.255.255.248My Settings:

The Modem is connected to world. To the modem I have the Tilgen Router connected. The Tilgen is set with an ip of .153 and the subnetmask listed above. DHCP is turned on and has IP range set for .154-.158. It is set in Bridge Mode with NAT and Firewall turned off. To that I have the WRTG54G router connected and assigned the router an Static IP of .154.. The cable is going into the Linksys WAN port.From a computer connected to a LAN port on the WRT54G, I see my public IP as .154, currently my internal IP is 192.168.1.15 so I believe I have to assign one of my Static IPs to this PC, however when I try to connect to the Linksys Router (.154) from the outside web, I am get a time out error. (also from a ping test.) My thoughts are to assign the Linksys to DHCP and use a range of .155-.158 to give each lan item a static IP. My question is will this work? Will each item in the network have its own IP and if I forward the port to the DVR that i needed, ie 80 for web client or 6100 for desktop client, will that forward through?Or do I set it to Router Mode and use the Tilgen to assign the ips.

On the Tilgen I also have an option for a DHCP relay or to turn off DHCP.

For clarification here is the setup chain
Broadband/DSL Line>>Tilgen Modem>>(LANPort1)Tilgen Router(LAN Port2)>>(WAN) Linksys(LANPort1)>>DVR/Computers
Found this walkthrough on setting the WRT54G into a Switch. If I did this, in theory the VOOD would assign those computers/dvr connected downstream via the WRT54G a static ip from my range set on the router. Then in theory I would not need to port forward port 80 since the DVR would be on its own public IP.?

View 7 Replies View Related

Routers / Switches :: How To Open The Tp-link Interface Setup

Aug 16, 2012

how to open the tp-link interface setup for my TD-W896ON? i have a user and a password but where do i add them ??

View 1 Replies View Related

Routers / Switches :: Vlan Setup On 2848 Switch?

Jul 25, 2012

I have a dell powerconnect 2848 switch and setting up a vlan 3 an make port 1 mngt, port 48 uplink to layer 3 switch and tag vlan 1 and 3 to port 48 with cli commands for this setup. and also to untag ports 2-10 for computers

View 1 Replies View Related

Routers / Switches :: Can Setup A Staticip Address On A Wireless Computer

Aug 28, 2012

I want to setup a static ip address for a h.264 network dvr ,however my desktop computer is out of order, that is connected direct to router,is it possible to use my wireless laptop to setup the router,or will I have to connect the eithernet cable to the laptop.

View 4 Replies View Related

Routers / Switches :: Linksys E1000 Wifi N Router Setup Without Cd?

Apr 19, 2011

The router was working fine when it was setup but was disconnected for a short while. There is now no recognition of the router and the install cd was misplaced...

View 2 Replies View Related

Routers / Switches :: Setup DMZ By Using Home Router To Prevent Attack?

May 5, 2011

Currently in my office have a TPlink wireless router (WR1043N), and Dlink 615 router.Below is my office's network organization.Internet-->TPLinkRouter(192.168.2.0)-->DlinkRouter(192.168.0.0)We want to host a demo website but we are afraid our network being attacked. So we wish to implement a DMZ network to hide our internal network from outside. My question is can i setup a dmz network with the above capabilities by using home routers?

View 5 Replies View Related

Routers / Switches :: Unable To Configure The Setup On A Hawking 300 N Router

Mar 17, 2012

I have a Hawking 300N and I have misplaced my disk and I neing walked through this to have it set back up. I hooked it all up correctly and it says no internet connection

View 1 Replies View Related

Cisco Routers :: Setup Port Forwarding On RV220W To Allow Outside Connections On RDP

Sep 5, 2011

I have setup port forwarding on the RV220W, to allow outside connections on RDP. I have tested that LAN RDP works fine, but when I test using an outside address trying to connect to an inside windows PC with RDP nothing happens.

View 11 Replies View Related

Cisco AAA/Identity/Nac :: 3750 / Get RADIUS Setup For Authentication To Switches And Routers?

Sep 19, 2012

We are setting up a new office and I am trying to get RADIUS setup for authentication to my switches and routers.  Currently I am working on a 3750 running IOS 15 and getting hung on what I think on something small.  I have attached my Microsoft NPS Network Policy.  Below is my IOS config:
 
aaa group server radius corp-radius
server 10.15.10.20 auth-port 1812 acct-port 1813
!
aaa authentication login default group corp-radius local
aaa authentication login radius-localfallback group corp-radius enable
aaa authorization exec default group radius

[code]....

View 4 Replies View Related

Routers / Switches :: Port Forwarded But Still Blocked

Jan 6, 2013

I am trying to create a server in a game called Minecraft. I have forwarded port 25565 (which I put in the server settings for incoming connections and I checked that 10 times so that is ok) on my thomson TG787. I've opened the same port on my firewall in windows 7. I've disabled my firewall completely. But it's still blocked. It's simply doesn't work..I'm 100% I fixed it on the router.

View 21 Replies View Related

Routers / Switches :: Sky Router Port Forwarding

Feb 12, 2011

I am trying to open port 12000 on my sky dlink router, been trying for a few days now and i just can't nail it. When i log into router, it brings up the sky router page, any one ever setup port 12000 on the sky router page.

View 1 Replies View Related

Routers / Switches :: What Port Number Does Ping Use

Apr 13, 2011

what port number does ping use?

View 3 Replies View Related

Routers / Switches :: Port Forwarded But Still Blocked?

Jan 23, 2011

I am trying to create a server in a game called Minecraft. I have forwarded port 25565 (which I put in the server settings for incoming connections and I checked that 10 times so that is ok) on my netgear wnd3700. I've opened the same port on my firewall in windows 7. I've disabled my firewall completely. Everything should be cool, but still, checking with canyouseeme.org and asking friends to join. It is still blocked. It simply doesn't work.. I checked my router for any firewall but couldnt see any.. So yeah I'm 100% I fixed it on the router, unless someone is gonna tell me that there is still an option in the router that might fix it.. but I think I did something wrong in the firewall..Although I have been trying to get this to work all day.. I'd rather get some advice on the firewall or other options in my router. Btw, I am using AVG free edition, and I am pretty sure there is no firewall in that version, but there might be something I have to disable in order for this to work ?

View 15 Replies View Related

Routers / Switches :: Why Is Port Forwarding Not Open

Dec 25, 2011

When checking my port forwarding, it says that it is not open.

View 2 Replies View Related

Routers / Switches :: Netgear And Westell Port Forwarding

Feb 23, 2011

I have set my Netgear WGR614 to a static IP, and I have tried port forwarding but I can't. I've tried disabling SPI Firewall and it still don't work. I have also tried enabling bridge settings on my connection in my modem settings, but that just wouldn't let me back on my internet. How I can port forward?I have a westell 610015.

View 3 Replies View Related

Routers / Switches :: Plug A 8 Port Switch Directly?

Sep 27, 2011

I have a Modem/Router combo and am trying to plug an 8 port switch directly into it and then have wireless AP's and other hardwired devices plugged into the switch. Normally, when I plug a switch into a router it requires no set up. This one on the other hand, will not work.

View 7 Replies View Related

Routers / Switches :: Can Feed Router From A 4 Port Switch

Mar 19, 2011

ISP Cable in Smart box. 4 cat 5 cables from various rooms in house to feed cable ready TV's and one from my computer room. Can I connect all cat 5's to switch that is connected to cable modem located in Smart box and connect Wireless Router to cat 5 in the computer room and expect router to work properly?

View 4 Replies View Related

Routers / Switches :: Unable To Find Open Port

Feb 7, 2011

I have just upgraded my AIM and Skype messengers and now it won't let me sign in. I did before with my old versions. It is saying that my internet connection is bad which it is not. I have looked up ports in my Yahoo messengers, Control Panel and Bit Torrent still nothing.

View 6 Replies View Related

Routers / Switches :: Can't Get Router Usb Port To Keep Reliable Connection

Apr 15, 2012

how do I get my hard drive to work thru my belkin router usb port?

View 1 Replies View Related

Routers / Switches :: Open A Port On A Motorola Modem?

Aug 26, 2011

how do i open a port on Motorola modem

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved