I have configured EAP-FAST local authentication on a 5508 running 7.0.116.0. I am trying to connect using a motorola/symbol MC3090. In the handheld, It appears to be failing due to receiving no PAC. On the 5508, it just looks like a timeout. Are the PACs created on the 5508 automatically, or do I need to generate one?
View 1 RepliesWe are using WLC-5508 in our corporate. For authenication we have implemented ACS with LDAP configured as external user database. We can able to get authenicated for Web based authenication. When it is configured for EAP-FAST, authenitication is not happening.
View 3 Replies View RelatedHave a controller based depolyment with (2) 5508s and an 1121 ACS appliance running 5.1 code. Controllers are setup identically and we are radius authenticating users to AD via the ACS. Everything works great on the primary controller, but when I test failover to the secondary controller, my authentication fails and I get the following error message in my ACS logs:
12126 EAP-FAST cryptobinding verification passed
12147 Machine Authentication is disabled
12161 Cannot provision Authorization PAC when the stateless session resume is disabled
12106 EAP-FAST authentication phase finished successfully
11503 Prepared EAP-Success
I need to configure EAP-FAST without certificate and authenticate to the corporate Microsoft AD database, Do I need a Cisco ACS server in the middle to forward the authentication to the AD? Or I can do the authentication to the AD directly? I am using a WLC5508.
View 6 Replies View RelatedI have a pair of WLC 5508's. I am installing 7.4.100 on them and they are properly licensed. I am looking to preconfigure these and ship them to our site. My questions are:
1) How much configuration do I need to setup on the secondary controller (ie. same SSID, interaces, ap group, etc...)?
2) Do I need to configure Mobility groups for this HA Cluster?
Is there anyway to configure a 5508 via the SFP ports? Or do you have to use the service port for autoinstall or NCS auto provisioning? It looks like it grabs a DHCP address but it doesn't seem to like telnet,ssh ,HTTP or HTTPS.
View 2 Replies View RelatedI have Cisco 5508 Wlan Controller Software version 7.2.103.0 and I have Cisco AIR-CAP3602I-E-K9 Lightweight Access Points network and its working fine now I want to configure the Repeater in this network. Because there is one area we cannot layout the cable. How to add the repeater and how to configure the repeater in wlan controller network.
Do i need the change the software of Wlan Controller to support Mesh Network or this version 7.2.103.0 can support the repeater because for 1 access point i dont want to upgrade the version.
I would like to know if microsoft 2008 server RADIUS server could be use for authentication on Cosco 5508 instead of Cisco ACS.
View 4 Replies View RelatedConfiguring HP switches for Flexconnect. I am not sure if or not its doable? Access Points are 2600 and 3600 with 5508 as a controller. Idea is to keep the branch traffic local but the switches are HP.
View 3 Replies View Relatedis driver compulsory for wifi .tell me how to connect to wifi as i am unable to connect
View 1 Replies View Relatedi want to control manageent access to symbol Wireless Switch WS6000 with my ACS. the issue is that i can't find the Vendor Specific Attributes forSymbol devices. i wonder if theres a way to control it with IETF or Other Radius Attributes.
View 3 Replies View RelatedDoes anyone know if it is possible to use an 5508 WLC running version 7.0.116.0 as a DNS box? Was not able to find anything in the config guide.
View 2 Replies View RelatedAt the main site, I have 3 5508 WLCs each part of a mobility group (wlcMain-MG). In NCS, under "System/Mobility Groups" for each controller, I see each controller listed as "local" with the other Controllers listed with the group name "wlcMain-MG". None of the SSIDs are "anchored".
I have a new site with a 2500 series WLC that I would like to push out 2 SSIDs. This site contains two customers. One customer is the Main customer with the second customer leasing space.
I have the Cust2 WLAN at the remote site set to have traffic egress out of a local interface on the 2500 WLC (this traffic is then tunnelled back to their Main location via an ASA which houses the DHCP scope for that vlan). I can connect to this SSID, obtain an IP Address off the ASA and am tunnelling without issue.
For the Cust1 WLAN at the remote site, I would like to broadcast an SSID from the Main location on those same APs which are registered to the 2500. It is my understanding, that I anchor the SSID at the Main site and identically configure the SSID at the remote site. This will allow the end user to authenticate to the RADIUS server at the Main site and be placed upon the correct vlan (we are using DOT1x and dynamic vlans).
For my test, I am starting simple. I have created a test WLAN with no authentication. At the main site, on 5508 WLC3, I have created the test WLAN, and placed the interface into a low security vlan (call it VLAN-low). I have anchored this test WLAN to that controller. At the remote site, I have created the same WLAN (but placed it into the management interface for now - the VLAN-low does not exist at the remote site) and configured that WLAN to anchor back to the WLC3 at the main site. I am unable to obtain an IP address from the remote site. I have placed the remote site WLC in the wlcMain-MG as well. How close does the code need to be on the controllers - the 5508s are at 7.0.116.0 and the 2500 is at 7.0.220.0? What could I be missing?
How to configure ssh in all access points ( cisco 3500 Access points ) under wlc 5508 ?
View 3 Replies View RelatedI am using a Samsung N210 with 2GB of memory in it and Windows 7 Starter. When I use the wireless connection the "Connection Status" shows as 72Mbps, which is to be expected considering I am only a few feet from the router.the speed is nothing like that in reality. I tested the actual transfer speeds for the wired and wireless connections by copying a 238MB folder with 77 photos in it. I copied it from the NAS device, where I store all my files, to the local disk of the netbook.
View 2 Replies View Relatedhow is the IP configuration for this Fast Ethernet F0.
This is because usually we only assign IP to the BVI interface. Is it after that, the Fast Ethernet F0 automatically also be assigned the same IP?
As such, when goto the Fast Ethernet F0 by CLI, by using no shut then this will Enable the Fast Ethernet Port?
ISP provides us with 20 mb/s download speed. Both Toshiba laptops used to be able to attain this but after reinstalling windows xp on this laptop, it can only achieve 8mb/s. The other laptop will get 20 mb/s whether connected wired or wireless. For the life of me cannot figure what has changed. I have installed all windows updates including SP3 and updated all drivers via Toshiba website. It uses the Intel 3945b/g network card and the router is a motorola sbg 6580.Connecting wired will achieve 20mb/s so it has something to do with the wireless setup.Have tried connecting to router with WPA, WPA2, and no encryption but makes no difference.Testing right beside the router or 30ft away makes no difference.Have uninstalled/reinstalled network card but made no difference
View 6 Replies View RelatedI have a configuration AP & WDS (with AP):
#show version
Cisco IOS Software, C1140 Software (C1140-K9W7-M), Version 12.4(25d)JA1, RELEASE SOFTWARE (fc1)
...
ROM: Bootstrap program is C1140 boot loader
BOOTLDR: C1140 Boot Loader (C1140-BOOT-M) Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1)
[code]....
When I try to connect to WPA-ENTERPRISE or WPA-PSK - connected, but when I try to connect ot CCKM-ROAMING or WPA-ROAMING using EAP-FAST or LEAP (with or without CCKM) - connection failed.
Notice: In the current configuration, if client use LEAP (without CCKM) and AP work without WDS - WPA-ROAMING is worked correctly. But if client use LEAP (without CCKM) and AP work with WDS - WPA-ROAMING is not working.
My router isn't allowing any wireless connections. I just woke up and my router was refusing connection to my wife's laptop and both our Nintendo 3DSes. However, my Xbox and my PC are directly connected and work perfectly. The laptop keeps saying my passkey is wrong.
View 2 Replies View RelatedI just reformatted my PC and the internet is really slow. I should be getting 15 Megs down but only getting as little as 1 Meg down. Every other PC and device in the house is getting 15 down. why my PC would be slowing down my speeds?
View 1 Replies View RelatedI just set up a new computer with win 7 - 64. The cable broadband download speed is less than 1 meg/sec. My wife and daughters computers, which are wireless, see now slowdown. My computer is connected to the router thru the ethernet connection. The previous computer using win xp - 32, plugged into the same router had no unusual speed problems. I did turn off the windows 7 firewall. Did no good.Could there be some incompatibility between the router and win 7 - 64?? Are there some settings that need changing?
View 1 Replies View RelatedI get 17 mbs download on one wireless laptop, only 7 mbs on the other wireless laptop. What should I look for to fix the slow laptop.The slow laptop is 8 feet from router with drywall wall between, the faster is 25 feet, no wall between computer and router.
View 1 Replies View RelatedI recently bought a WRT160N Wireless router and am not getting fast wireless speeds. My ISP told me my speeds are 10mbps download and 1 mbps upload. I realize that this is not lighting fast but it is all that I feel like i need. My speeds on the WRT160N are about 2-3 MBPS d/l and 600kbps u/l on my wireless connection, which is hooked up to my playstation 3. My wired connection, which goes to my pc, is 9.75 mbps d/l and about .95 mbps u/l, which seems right. Why am I getting such low speeds with a router that is suppose to be build for faster wireless and longer ranges.To make a comparison, I have been using an OLD linksys b-rated router. i can't exactly remember the model, but i think it is the bef11s4, it came with a network card and is about 6-7 years old. I was getting 3-3.5 mbps d/l and 800kbps u/l with the b rated router, and it seemed like a better reception, like in the 80's-90's. ThisWRT160N is getting like in the 70's and sometimes lower.I have tried setting the router to open all ports to a dedicated ip address, it made things a little better, maybe getting 2.5 mbps d/l at the most. What am i doing wrong? I have heard something about tomato firmware but am not real familiar with it?
View 5 Replies View RelatedLenovo T61P
Win 7
Wireless Connection (Router Linksys WRT54G2)
I installed Comodo's Firewall and during installation I accepted to install the Secure DNS too. Afterward I noticed my web-pages loaded slower than usual. They weren't extremely slow but definitely slower than what I've been accustomed. I tried some OPENDNS servers and others to see if it made any difference but it didn't. I also went to my router's setup page((http://192.168.1.1/)so I could manually add the previously mentioned DNS servers. I finally decided to revert back to my old DNS list. To disable using the Comodo DNS servers I did the following:Wireless Network Connection Properties-> Internet Protocol Ver 4 (TCP/IPv4)-> Properties -> Select "Obtain DNS server address automatically"I also went into to my router's setup page (http://192.168.1.1/) to set my DNS list to zeros so that I can get back my default ISP's DNS servers (207.69.188.185,186,187). However, website loading is still sluggish.I thought the issue might just be a temporary hiccup from my ISP but my roommate doesn't have these issues. We tried a speed test at dslreports.com and the results were weird. On my laptop the results were 8500+ Kb/s with a 279ms latency. I was 10 ft away from my router.
my internet speed is fast but page loads very slow
View 1 Replies View Relatedbasically my wireless speeds are around 0.5mb when i do a speedtest on windows, however on safe mode it will be 12mb. there's obviously some sort of conflict which i have struggled to identify.
here is what i tried
- fresh installs, although at the start the speeds are fine but once i install more drivers/programs it will do it
- installed different wireless drivers
- disabled certain processes/services
windows 7
pci express wireless adapter - TL-WR781ND
I have a Linksys E1550 Wireless Router that is fast as can be on the wired connection, getting 30mbs from the cable modem connection. If I switch to using wireless on the same PC, the max connection speed I'll get is 2mbs. I've changed all sorts of settings trying to get this working right, and it still stays at 2mbs.As an additional note, this router was previously working fine at 30mbs on wireless as well, then out of nowhere this weekend, it started running at 2mbs. I went and purchased another of the same model and it is doing the same thing as well.
What is the secret to having this run at it's correct speed, not this slow 2mbs that it is now? I have configured this the same as every other Linksys router I've had in the past, and it is running horribly slow..I'm on the newest firmware as well, have already verified that. The old router was updated to newest firmware as testing to resolve this, and the new router came with it installed already.
3602I constantly shows a fast blinking green light, watching the boot up I see the following:
Loading "flash:/ap3g2-k9w8-mx.152-2.JA/ap3g2-k9w8-xx.152-2.JA"...uncompress: Unknown mzip segment type: 2
Error loading "flash:/ap3g2-k9w8-mx.152-2.JA/ap3g2-k9w8-xx.152-2.JA"
I'm finally upgrading my internet from my currently pathetic 1.5 mbps to a robust 20 mbps cable connection. It's getting installed over the weekend and my question is, should I try to place the modem close enough to my pc for a direct ethernet connection, or will wireless be fast enough to take advantage of the full 20 mbps? I have a linksys wireless-g wrt54g router. It says it's 54mbps so it should be far beyond my cable speed. My adapter on my pc is a Netgear WNDA3100-100NAR dual band usb 2.0 wireless N adapter that claims up to 300 mbps. So it seems like I should be able to achieve the same speeds wireless or wired, but really don't know much about networking other than basic router setup so wanted to double check. It will be a bit of hassle to try to route the modem into my computer room as I don't have any lines run there currently. If I place it by the tv and go wireless it's a lot easier setup.
View 4 Replies View RelatedI have a E3200 Router and when the computers are connected directly to router (Wired) the speed is SLOW and when computers are connected via wireless the speed is fast (normal). What can i do to have the wired computer with same fast speed as wireless?....i'm i missing something?Here are the speed results:
All wired computers connections (total of 4) downwload speed ranging from 8 Mbps to 13 Mbps.
All wireless computer connections download speed stable at 49 Mbps.
I bought my own modem, a Motorolla Extreme something or other, is a DOCSIS 3.0. My router is a Belkin N150. When I plug my desktop computer directly into the router, I get speeds upwards of 50Mbps. The wireless, however, gets about 0.15Mbps download, but as much as 12Mbps upload.
I know it's not computer specific, because I plugged my laptop directly into the modem and got the full speed. AND I put a wireless adaptor on the desktop and got the slower speeds.I live in a densely populated area and there are 27 other (visible) wireless networks available (all locked, unfortunately. Otherwise I wouldn't be in this situation in the first place). So I tried every channel, doing a speedtest with each, and I got almost identical results each time: 0.12-0.17Mbps download, 11-13Mbps upload. I can't imagine that getting only 0.15Mbps could be a result of a channel being clogged, but I tried it anyway;
I recently upgraded my internet speed service from my ISP (Brighthouse). They installed a gateway to replace their old modem, but I have had it bridged so it should act as a modem. Speedtest.net shows downloads on the order of 40-50 Mbps and uploads around 5 Mbps. If I try doing something interactively that pushes the speed and size of files (like flying over Google earth using my mouse to guide the direction and speed) my connection seems to hang. I have to reset the router (unpower and repower it) to get my internet connection to work. This has also happened when I quickly downloaded a series of large images - I click to get the next page fairly soon after the current page has finished downloaded. My router is a WRT350N.
View 6 Replies View RelatedAfter recently intalling the WMP600N wireless adapter I have had great trouble getting it working properly.
Current performance
- signal: verygood/ excellent
- download speed: ~1mb
- upload speed: ~2mb
- signal speed: 18-54mbps (lots of variance but never above 54)
Comparison to my laptop
Laptop in same location with wireless G capability
- signal: verygood/ excellent
- download speed: ~20mb
- upload speed: ~2mb
- signal speed: 54mbps
my router is a D-Link wireless N router I recieved from my ISP. I do not believe my router is to blame for this problem since I have a laptop with an inferior wireless adapter recieving 20X the download speed.Drivers I have installed the latest drivers for windows 7 and I am running windows 7 Ultimate 64bit.