Cisco Wireless :: Configuring A 1260 Autonomous AP Documentation?
Mar 5, 2012good docs for configuring a 1260 autonomous AP?
View 1 Replies
ADVERTISEMENT
Cisco Wireless :: Aironet 1260 Series MAC Filtering In Autonomous Mode
May 13, 2013Do we have Option to add MAC address of specific laptop or Mobile to connect to the Access Point in cisco Aironet AP 1260 series in Autonmous mode
View 4 Replies View RelatedCisco :: AP 1260 Autonomous With WPA2-PSK And MAC Filter
Feb 28, 2013I have two Cisco 1260 autonomous access point setup with WPA2-PSK. They are up and running. In that configuration it is Personal security since the security is only provided by the shared key. I'd like to add MAC filtering so in my open authentification I just scroll down to "with MAC filtering" and save. Doing that crash everything and switch to Enterprise security which need to have a Radius server (the shared key is not saved anymore and by using a device I now see 802.1x security).
View 1 Replies View RelatedCisco Wireless :: Configuring 1142n AP In Autonomous Mode?
May 5, 2011I’m configuring a Cisco 1142n AP in autonomous mode. The networking part is successfully working, multiple VLANs, SSIDs etc. I would like to configure one of my wireless networks to work with WAP2-PSK and the other with WPA-PSK.I’m confused as to what encryption to set on each radio and the ciphers to use on the SSID for each vlan to enable the best possible security. I’m not using a RADIUS sever in my network .point me in the right direction with the right CLI commands?
View 12 Replies View RelatedCisco Wireless :: Configuring Autonomous 1141 To Do DHCP For Guest Wi-Fi?
Oct 6, 2012I have an existing setup consisting of:
Windows Server - doing DHCP for private wired/wireless
Cisco 1141 Autonomous WAP with only private wireless access.
ASA 5505 (with very basic licensing)
HP switch
The customer wants to have guest WiFi.
The guest WiFi is going out to the internet via a seperate VLAN/interface on the ASA. Can the 1141 do DHCP for the guest WiFi? Or do I need to do it via the ASA?
Linksys Wireless Adapters :: AE2500 - Documentation For Advanced Settings
Dec 12, 2011I Recently purchased the Linksys AE2500 adapter, upon looking at the advanced adapter settings, I couldn't find any more information pertaining to these settings on any linksys website or in fact online, where can I find a guide about these settings, Nothing about these setting was included on the CD.I set the basic one such as roaming aggressiveness but there are others that I would like to know about.
View 8 Replies View RelatedCisco Wireless :: Current IOS For 1260 AP?
Jun 12, 2012What is the most current version oF IOS for the following Wireless AP(Aironet 1260)
Product/Model Number: AIR-AP1261N-E-K9
System Software Filename: ap3g1-k9w7-tar.124
Cisco Wireless :: Aironet 1260 As Bridges?
Feb 2, 2012Is it possible to create a wireless site to site link using 1260 access points as bridges (like the 1300 series)?
Also if so, can you use 11n channel bonding on the bridge link?
I need to link 2 buildings together wirelessly approximately 70 metres apart. There is direct line of sight between them.
Cisco Wireless :: Antenna Separation For AP 1260?
Oct 24, 2012We are installing 1260 Access Point (AIR-LAP1262N-E-K9) with 2 sets of external antenna:AIR-ANT2460NP-R (2.4Ghz, Patch Wall-mount, 6dBi Directional) & AIR-ANT5160NP-R (5Ghz, Patch Wall-mount, 6dBi Directional).What would be the recommended separation of the 2 antennas if they will be mounted beside each other?
View 1 Replies View RelatedCisco Wireless :: Upgrade IOS Image For 1260 AP?
Nov 3, 2012i have cisco 1260 Access point with standalone ios ap3g1-k9w7-tar.124-23c. i download new IOS to connect the AP to the controller the new ios is ap3g1-k9w8-tar.124-23c.JA5.tar. upgrade th AP to LAP. is it just install ios like in router & switch by tftp?
View 1 Replies View RelatedCisco Wireless :: 1260 Can't Get IP Address And Can't Joint WLC
Nov 24, 2012i have Cisco WLC 2504 & 1260 LAP.i connect the WLC to L3 switch & connect the LAP to another port in the same L3 switch.i configure DHCP on the same switch to provide ip for the LAP , but the LAP can't get an ip address and can't joint the controller.also if when i login to the LAP i can't enter the configuration mode.
View 6 Replies View RelatedCisco Wireless :: 1260 And 3500 - Bridge With Two AP's
May 14, 2013So I'm going to bridge two Cisco AP's 1260 and 3500, which have an 880 router on each side.
(Currently I have a VPN set-up through the internet for the two locations to communicate) (Naturally they are currently in different subnets) Will absolutely change this and set up as one subnet. There is VLANs setup on each router (same VLANs)
VLAN 1
And
VLAN 10
Everything is configured on the Routers and AP's for these VLANs (works flawlessly over the VPN).
So now since I’m going to get rid of the VPN and set-up a bridge with two AP's, will having same VLANs across both routers be a problem? Will VLANs work OK through the bridge?
Besides using (IP helper address DHCP-IP) command on the non-root bridge side router to forward DHCP requests to the root bridge side router, Also I want to be able to route internet traffic on the non-root bridge side through the WAN port, and only route LAN traffic through the bridge..
Cisco Wireless :: How New 1260 Will Work In Mixed Environment
Aug 2, 2011I am looking to slowly migrate some of our wireless devices (Aironet 1231 and 1232's) to the Wireless N spec - 1260's.I currently have four AP locations that I want to upgrade first before anywhere else. At the minute, these four AP's work on the 2.4Ghz G band.
how the new 1260's will work in the mixed environment. I believe I will need to purchase the 1262 (which is the dual band version) so that I can operate the AP in both the 2.4Ghz G band range and the 5Ghz N range at the same time, is this correct?If I was to purchase the 1261 (which is the single band version), will I only be able to operate in either th 2.4Ghz or 5Ghz, but not at the same time?
For the mixed environment, would you suggest the dual band version? Can I place the same SSID on multiple Radios if this is the case? Following example: Say I have the SSID called 'Company' - this at the minute is operating on the G band 2.4Ghz range. If I was to purcahse the dual band 1262, could I put this SSID on both the G radio and the N radio? Would clients with an N adapter automatically connect to the 5Ghz range (N Radio) and legacy G and B adapters automatically connect to the 2.4Ghz (G Radio)?
Cisco Firewall :: ASA 5512-X Getting Documentation
May 14, 2013I am having soem difficulty getting documentation and setup procedures for the new ASA 5512-X (or X models in general) firewalls.I know the IPS sensor is a software-based one, but I'm not sure how much different the setup in than with a 5510 and IPS module.
Also, is the IOS upgrade procedure different?
Documentation Of Computer Network?
Apr 21, 2012I would like to know if any of you know how to do a documentation of a network (Computer Network) in the topics of Remote Application, Users, and Group Policy.I have been trying to look for examples of documentations of those topics, but nothing.
View 1 Replies View RelatedCisco Wireless :: Replacing AP1231G-E-K9 (LEAP) With New 1260 / Will It Work
Aug 24, 2011iam currently trying to replace AP1231G-E-K9 with new equipment / Cisco AP next generation maybe?The problem is that the system, that is going to use the AP is using aironet 350 PCMCIA adapter with LEAP. If in fact we are going to use a new Cisco AP, will the new generation work with Aironet 350 Adapter and support LEAP?
View 2 Replies View RelatedCisco Wireless :: How To Setup A Standalone Aironet AP 1260 Series
Sep 13, 2011I'm new to the Cisco Aironet Access Point. I got a new STANDALONE Aironet 1260 series access point device. The part # AIR-AP1262N-A-K9. The shipping package did not come with any guide, CD, and power adapter. I searched the Cisco sites, but could not find appropriate manuals. I did find a getting started guide but not for standalone AP, it's for Controller-based AP. Question - where can I find manuals / guides to set up and configure my new standalone Cisco Aironet Access Point 1260?
View 3 Replies View RelatedCisco WAN :: ASA 5520 - Documentation To Extend VLAN?
Aug 18, 2011Is there any documentation on how to extend a VLAN over WAN using a ASA 5520 appliance?I will be inheriting the network appliance and need to make the configuration change.
View 2 Replies View RelatedCisco Wireless :: Aironet 1260 Series - Sending Station Has Left BSS
Oct 29, 2012We have been having issues with random packet drops and or some sort of radio lockup which happens a few times a day. I have a test AP setup with a few clients only a few feet away and I see this combination of messages. Should I be seeing these clients drop off and then reconnect immediately? Granted these test clients are not passing much data but my assumption is that they would not become deauthenticated because of lack of activity? This setup is using a radius server for authentication. I tested it before with just WPA2 PSK and only had a few disconnected over a number of days, compared with many a day with the Radius.
View 1 Replies View RelatedCisco Wireless :: Mesh 1260 Ethernet Bridging With VLAN Tagging
Mar 18, 2012I'm a little stuck with a 4400 7.0.220.0 + RAP 1550 + MAP 1260 Ethernet bridging issue. I'm using the VLAN tagging functionality and I'm finding that periodically a VLAN that I've tagged on the MAP will deregister from the backhaul and stop passing traffic. If I go into the Mesh tab on the MAP, select the wired interface, remove the VLAN from the list of tagged VLAN IDs and then add it right back to the list, its starts passing traffic again
View 2 Replies View RelatedCisco Wireless :: Aironet 1260 Access Point Work Without Controller??
Dec 1, 2010I would like to buy Cisco Aironet 1260 Access Points, i just want to use them independantly so i want to know do they work without the Wireless LAN Controller? or i have to have the controller for them to work? they will be in different locations so i cant have a controller per each location.
View 9 Replies View RelatedCisco Wireless :: AP 1260 Configuration / 0 Clients Connected And Light Always Green
Feb 5, 2013Recently I have installed and configurated an AP 1260, it has already IP, SSID, and ping to the router, but after install the antenna I open the web configuration and see that it has 0 clients connected and the light is always green, indicated as only is configurated with nobody connected.
Tha radio setting is up, 2,4 Ghz and 5 Ghz any issue with the antenna? or i need to configure anything else?
Cisco Wireless :: 1260 Root AP De-authenticating WGB Clients After 6 Minutes Of Inactivity
May 27, 2013i have 2 1260 Access points one is in root mode , one is wgb mode. Authentication is EAPFAST. There are 5 devices connected via WGB bridge to the rest of the network.
- If clients are sending some data , then WGB AP announces this client mac via IAPP to root AP and rest of the network sees them correctly
- If clients are "passive" , then after WBG AP announces them to root AP , they timeout after 6 minutes on root AP and obviously they are not pingable from the rest of the network. The only way to restore connectivity is to ping that device from WGB AP, then WGB AP announces via IAPP to root AP , then and only then they become visible from the rest of the network.
My question is related to this 6 minute timeout on root AP . Is it normal behaviour ?
Cisco Firewall :: Detailed Documentation On ASA 5512-x And 5515-x?
Aug 7, 2012where I can find detailed documentation on these two products. Particularly, I am looking for high availability capabilities and any license requirements.
View 1 Replies View RelatedCisco Wireless :: 1260 AP Suitable Replacements To The 1watt Luxul 2.4ghz Amplifiers
Jan 19, 2012We’re deploying new WIFI towers at several of our vacation resorts and have decided to migrate from Wireless G to Wireless N access points. We currently have the following in each WIFI tower – Hotspot I’ve been researching and speaking to our partner pre-sales team, and have narrowed the choice down to deploying 3 x AIR-AP1261N-x-K9 at each of our towers. I have been unable to find suitable replacements to the 1watt Luxul 2.4ghz amplifiers we’re using, or really good N sector antennas to mount to the top of our masts. The 1260’s are all 802.af, so besides getting power injectors there shouldn’t be to much to think about.
View 30 Replies View RelatedCisco Wireless :: Is Aironet 1260 Good For Indoor LWAP Or CAPWAP Environment
Jul 12, 2012Is Aironet 1260 good for indoor LWAP or CAPWAP environment? Do we need external antenna for the Aironet 1260 access point when using it indoor?
View 1 Replies View RelatedCisco Routers :: Is There Documentation On Setting RV042G To Router Mode
Feb 21, 2013Is there documentation on setting the RV042G to Router Mode and what that changes to it's topography? The manual simply tells us to click the button to change the mode?!?!? A 4th grader could figure that out - but what does it do to the unit? Does it basically become a glorified switch with an internet connection? Can the 2nd WAN port be used as a switch node?
View 1 Replies View RelatedCisco WAN :: 881g 3g Cannot Find Documentation About Sending USSD Requests
Aug 4, 2011I have Cisco 881g with 3g.I can;'t find any documentation about sending USSD requests from 3g module.is it possible to send USSD request ?
View 0 Replies View RelatedCisco Switching/Routing :: Documentation Of Catalyst 4500-X For Creating VSS And MEC
Mar 14, 2013I was reading the documentation of the Catalyst 4500-X for creating VSS and MEC (multichassis etherchannel).In the VSS specific part, it's written"Cisco Release IOS XE 3.4.0SG does not support Layer 3 MEC".
Can I still use VlanX interfaces ad route through them?In my setup I only have IP addresses assigned to vlanX interfaces (with some VRF-lite magic)[code] Does that sentence only mean that I can't have IP assigned directly to the MEC?
Cisco Switching/Routing :: 6500 - Commands To Get Input For Network Documentation?
Sep 15, 2012What are recommended commands to get input for network documentation (for disaster recovery)?
I've got 6500 with these modules: WS-SVC-FWM-1,
WS-SVC-IDSM-2, VS-S720-10G, WS-X6704-10GE, WS-X6748-SFP and dozens of WS-C3750E-48TD in couple of buildings.
So far I have these commands: Code...
Cisco Wireless :: 1140 AP Series Vs 1260 AP Series Technical Differences
Jul 24, 2012What's the main technical differences among the 1140 AP series and the 1260 AP series?I know that the 1260 supports external antennas while the 1140 supports internal antennas, but apart from that, is there any other important difference ?
View 10 Replies View RelatedCisco :: Aironet 1260 WDS Setup?
Jan 23, 2013I was wondering if its possible to setup the Cisco Aironet 1260 as a WDS master with radius and another Cisco Aironet 1260 as a slave for seamless roaming. How many slaves can a WDS master handle?
View 1 Replies View RelatedCisco AAA/Identity/Nac :: AIRONET 1260 With New Radius ACS 4.x?
Nov 18, 2012I have CISCO ACS 5.1 radius for VPN on ASA and tried to configure an NDG on it for AIRONET 1260 too and worked fine with IEEE 802.1x CISCO EAP-FAST authentication As I had some trouble to let users to authenticate only on VPN if are VPN users and only on CISCO AIRONET if need only WIFI AIRONET I tried exception policies rules but something not working. VPN was ok but not WIFI access denied for rule policy access I decided to install CISCO ACS 4.x on Windows 2003 that is on ACS 5 DVD I created NDG as done on ACS 5 put a shared secret , put on AIRONET too as done for ACS 5 but I receive an error against ACS 4.x To troubleshout it I tried [URL] but not work ! I think to have done all fine owever on ACS 5 it worked in 5 minutes I searched log inside ACS 4 and found "Invalid message authenticator in EAP request" and I found this: [URL]Changed shared secret more times but ever not workign with ACS 4 I need to have user and password prompt on client trying to authentincate on AIRONET WIFI and I need ACS INTERNAL USER no active directory, no LDAP , no external user database?
View 1 Replies View Related