Cisco Wireless :: How To Remove Web-authentication Bundle From WLC (7.0.116.0)

Sep 8, 2011

how can i remove webauth files from WLC?I have few versions of login.tar file used for web-authentication. After uploading a new login.tar file, the wlc still show old webauth bundle files. I tried to remove customized webauth login from wireless LAN, issue clear webauth-bundle and show>custom-web webauth-bundle WebAuth Bundle does not contain any files but when i upload new login.tar that does not include files from previous login.tar, i still get the old webauth. Is it possible to delete extracted webauth files from the controller using CLI?
 
WLC is running 7.0.116.0 code.

ADVERTISEMENT

Cisco Wireless :: Overwrite Image Web-authentication-bundle WLC 5500?

Jun 9, 2013

how to replace an image in webauth-bundle on WLC 5500?When I run "show custom-web webauth-bundle", I do see the files:

aup.html
login.html
yourlogo.jpg
 
But, the size of yourlogo.jpg is too big and need to replace with a smaller one.I have tried (with the appropiate IP and filename):

transfer download mode tftp
transfer download datatype image
transfer download serverip tftp-server-ip-addres
transfer download filename {filename.jpg | filename.gif | filename.png}
 
but, it does not work.

View 5 Replies View Related

Cisco Wireless :: 5508 Customized Web-Auth Bundle

May 30, 2012

I am trying to upload a customized web-auth bundle to a WLC 5508 and having some issues.I have downloaded the web-auth bundle from Cisco and used this as a template to create the web pages.I seem to recall that there is only a couple of Windows tools that you can use to TAR the file such as TUGZIP and IZARC. Anyway I have tried both and I still cannot get the file to extract. I have tried to strip the file out so that I only send up the login.html page and even this does not work.I am using a software release 7.0.220.0.

View 6 Replies View Related

Cisco Wireless :: WebAuth Bundle In 2106 AP Controller?

May 18, 2012

I would like to get webauth bundle sample to create custom page for our AP controllers but I'm unable to find the sample .tar within the WCS itself.Some other WCS manuals has references in them that says there should be link to download sample from WCS but clearly 2106 hasn't got one.There's one in download section "webauth bundle 1.0.2.zip" but this is for registered partners and costumers, we are not registered as partners and cannot download the sample ourselves.

View 2 Replies View Related

Cisco :: WLC 5508 - WebAuth Bundle Tar Error 256?

Nov 8, 2010

I have a new fresh 5508 release 7.0.98.0 When I try to download (I mean upload to the controller) a customized Webauth bundle in .tar format I have the following message error in the syslog :*TransferTask: Oct 29 12:56:08.894: %UPDATE-3-UNTAR_CMD_FAIL: updcode.c:2832 Error during untar of webauth bundle. Tar returned 256.

View 17 Replies View Related

Cisco WAN :: 2821 - Upgrading From 8T1 Bundle To Fractional DS3

Oct 2, 2012

I have been given a task to upgrade 8T1's bundle to DS3 Fractional circuit. We are currently using 2821 router with 4 VWIC-2MFT. What card/module I need to order for upgrading to fractional DS3. Also are there any compatability issues with ISP or local router.

View 6 Replies View Related

Cisco Application :: ACE-4710-02-K9 - Checking ACE Bundle Through CLI

Jun 16, 2012

What is the command that can show the ACE Bundle (Like: ACE-4710-02-K9, ACE-4710-04-K9). We have ordered one ACE with 4G BW, and another one with 2G BW. But nothing shows this fact using "show hardware" and "show inventory" commands !

View 1 Replies View Related

Cisco VPN :: Configuration With 7609 IPSec SPA Bundle

Feb 2, 2011

To understand and configuring VPN setup to give secure access to my DB & Application Server exist in my Datacenter, to other Service Provider organisation. They need to access those DB & Application Server sitting at their company LAN itself.
 
My DC Setup :-
 
1. Core Router 7609 with SPA-IPSEC-SSC400-1 ( Cisco 6500/7600 IPSec VPN SPA Bundle 1 )
2. Core Switch 6513 with FWSM, ACE, SVC ( Network Analyser ), SUP 720
3. Distribution 6509 SUP 720
 
All the DB & Application Server connected to Distribution Switch in various VLAN,The Server support team from another company need the access to those, for that we will take MPLS link connecting out Core Router.

View 1 Replies View Related

HP 2824 Switch - Wi-Fi Next To Ethernet Bundle

Jan 9, 2011

I'm going to be wiring a new (to me) house with a couple cat 6 runs to each room. The runs will all be brought back to an enclosed 6u rack and cat 6 110 style patch panel. This rack will contain:

- HP 2824 Switch
- PfSense router (Supermicro X7SPA-HF ITX board)
- DSL modem

Since the rack is completely metal and enclosed I'm going to put my Netgear WNDR3700 WiFi router (used as an access point only) on top of the rack. My question is, what the implications are in regards to placing a WiFi device right next to a bundle of ethernet cables?

View 4 Replies View Related

Cisco WAN :: Nexus 7000 Missing Licenses Which Should Come In Bundle

May 8, 2012

We have ordered the following 10 line items , but only got 3 licenses , unless the 3 licenses somehow have all the licenses integrated into the 3 part numbers below, but I suspect not.
  
Licenses attached from Cisco:-
 
N7K-C7009-XL-SBUN   Nexus 7009 Scalable Feature License                         x  1
N7K-C7009-SBUN-P1   Inc LAN,ADV,TRS,EL2,DCNM,DCNMSAN,MPLS,SAN,XL -Promotion     x 1

[Code].....

View 3 Replies View Related

Cisco :: WebAuth Bundle Not Uploading 2100 Series

May 19, 2012

Recectly we replaced Cisco 2100 Series LAN controller to Cisco 5508 Wirless LAN controller , I downloaded WebAuth Bundle from my Old LAN Controller ,when i am trying to upload to my New Wireless LAN controller ,its not uploading and also it gave me uploading failure error message .

View 2 Replies View Related

Cisco WAN :: Replace A ASA 5505 With 2801 With Security Bundle

Dec 21, 2011

I'm trying to replace a ASA 5505 with a Cisco 2801 w/ security bundle.I have gone through a pretty basic set up of configuring what I could and letting the Cisco Config Prof do the security audit to lock it down. I have everything working just fine except for the bandwidth.
 
As soon as I plug the router in it seems to give all the bandwidth to one computer and the rest of the campus slows down to a crawl.I turned on "fair-queue" and even tried the QoS wizard in CCP, but it seems like thats if you want to prioritize voice over data - which we aren't running VOIP so I don't need.

View 7 Replies View Related

Cisco :: 5508 - Webauth Bundle Upload Fails

Jul 26, 2011

I have in the past downloaded the webauth bundle to a wlc 5508 running 7.0.98 successfully. I am trying to upload a new bundle after modifying the AUP but I get an error after the  download to the wlc.
 
The error with FTP or TFTP is
% Error: Webauth Bundle file transfer failed - Unknown error - refer to log
 
I've tried to copy the unmodified bundle from the zip and get the same error so I don't think it's the login.tar file.

View 3 Replies View Related

Cisco WAN :: C7206 Multi-link Four T1 Circuits / 4th T1 Won't Bundle

Feb 1, 2011

I have a site which has been successfully running a multilink bundle of four T1 lines for about 6 months.  The remote location is a C3825 router and the central location router is a C7206.  I have access to both.  A few weeks ago the multilink circuit started flapping and I was able to identify one of the four T1 lines as the culprit.  When I shut down the interface for that one T1 line, the multilink circuit stops bouncing.  As soon as I issue a "no shut" command on that fourth T1 interface, the multilink circuit starts flapping, ping commands start to time out and I have to shut it down again.  The Telco has sent a technician to both locations and reported all tests run clean.  Internal wiring from the NIU to the router has also tested fine.  I've tried to move the T1 lines to different ports on both routers and the problem persists. [code]

View 9 Replies View Related

Cisco WAN :: 2961 - Multilink Frame And Abort Errors On 4 Data T1 Bundle?

Jan 5, 2011

We have 4 data T1s providing our office with 6Mbs of internet bandwidth.I have been trying to track down the reason(s) for the steadily increasing frame and abort errors on the Multilink interface of our new router.We have a new 2961 with 2 2 port T1 interface cards (VWIC2-2MFT-T1/E1).
 
At first it looked like the T1s were completely clean, but after diving down a bit the last of the 4 T1s does appear to have a decent amount of slip and error seconds.Is that something that would cause the Multilink interface to show input, frame, and abort errors?Any config or debug commands I should start with to narrow down what might be causing this problem?
 
Config snippets:
 
card type t1 0 0card type t1 0 1!controller T1 0/0/0clock source internalcablelength short 440channel-group 0 timeslots 1-24description HCFD-XXXXXX!controller T1 0/0/1clock source internalcablelength short 440channel-group 0 timeslots 1-24description HCFD-XXXXXX!controller T1 0/1/0clock source internalcablelength short 440channel-group 0 timeslots 1-24description HCFD-XXXXXX!controller T1 0/1/1clock source internalcablelength short 440channel-group 0 timeslots 1-24description HCFD-XXXXXX!interface Multilink1ip address X.X.X.X 255.255.255.252ip nat outsideip virtual-reassemblyppp multilinkppp multilink group 1ppp multilink fragment disable!interface Serial0/0/0:0description T1 : HCFD-XXXXXXno ip addressencapsulation pppppp

[code]....

View 2 Replies View Related

Cisco Application :: Configuration Generated By Dynamic Tools For Nexus Bundle N5K-C5548UP-B-S32

Sep 26, 2011

I found this reference  DCNM-L-NXACCK9  in the configuration generated by a dynamic Tools for a nexus  bundle N5K-C5548UP-B-S32. This reference is  not reflected in the price list. Has it been replaced? no datasheet  on Cisco portal.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ISE 3395 Upgrade Failing With % Manifest File Not Found In The Bundle

Nov 16, 2011

I am trying to upgrade a brand new ISE 3395 from 1.0.3.337 to 1.0.4 (latest).  It keeps failing with % Manifest file not found in the bundle Here is the output:

company-ise-01/admin# application upgrade ise-appbundle-1.0.4.573.i386.tar.gpg ftp
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle 

[code]...
 
I can't find anything about this for ISE, although there are a lot of topics for the same error for ACS.

View 7 Replies View Related

Cisco Switching/Routing :: Possible To1941 Security Bundle Router Support Minimum Of 2k Of VLAN ID

Dec 17, 2012

Is it possible to cisco 1941 security bundle router Support minimum of 2k of VLANs ID and shall support upto 60 vlans?

View 4 Replies View Related

How To Remove A Wireless Router From Computer

Dec 25, 2011

I have put my password in wrong on my new laptop and can't connect.

View 1 Replies View Related

Wireless :: Remove X Over Internet Connection On Computer?

Feb 24, 2013

I have a Toshiba note book and I can't on get on the Internet, I have a red x over my wireless icon

View 2 Replies View Related

Wireless :: Remove Road Runner ISP Software

Apr 10, 2011

I was given a Pc that had road runner on it. When I use our ISP IE does not connect, it seems to be looking for Road Runner. How do remove road runner so that I can connect to the internet?

View 1 Replies View Related

Remove Password On D-link DI-624 Wireless Router?

May 17, 2012

I have set up a password and stopped using my wireless and now i cannot remember the password, opps. is there any way to remove the password or reset it?

View 1 Replies View Related

Wireless :: Remove Desktop Zoom Network Manager

Jun 23, 2011

I currently use Pure network majic as my network manager but on my desktop zoom network manager is installed and will not allow PN to do its job. I have gone through my desktop with a fine tooth comb to find this file/application to no avail. I don't remember installing it, bit I need to get it off.I have the same problem:The previous reply was Did you look for it inside the Control Panel under "Add/Remove Programs"? Is there anyway to get rid of it? Is there a process that is running when it is running and what is the name of the process?

View 1 Replies View Related

Linksys Wireless Router :: How To Remove DD-WRT Firmware On WRT54G2 V1

Mar 25, 2009

I Installed the DD-WRT firmware on my linksys WRT54G2 v1 router....ibut now the connection keeps on dropping...not stable, how do I roll back to the original linksys firmware?

View 9 Replies View Related

Linksys Wireless Router :: Wrt150n - How To Remove A Device

Jan 23, 2008

I have the wireless-n wrt150n router. I have it wired to my computer and have it wirelessly connected to my ps3. But for some reason there is another unnamed device listed under My Network. My network was not secure before, but I changed it to secure when I noticed the unnamed device. How do I remove that unnamed device from my network?

View 3 Replies View Related

Cisco Wireless :: Remove WiSM2 From Catalyst 6500 Series Switch?

Jul 21, 2012

how to safely remove the WiSM2 from the Catalyst 6500 series switch? According to the documentation "Catalyst 6500 Series Wireless Services Module 2 Installation and Verification Note":

To remove the WiSM2, perform these steps:

Step1     Shut down the module by one of these methods: In privileged mode from the router prompt, enter the hw-mod module mod shutdown command. NoteIf you enter this command to shut down the module, you must enter the following commands in global configuration mode to restart (power down, and then power up) the module: Router# no power enable module modRouter# power enable module mod If the module does not respond to any commands, press the SHUTDOWN button located on the front panel of the module.

Step2     Verify that the WiSM2 shuts down. Do not remove the module from the switch until the POWER LEDis off.

But, in the case of Step1 (1st methods) I do not see a option "shutdown"  in the command "hw-mod module 3"...

All I prompted to enter is: c6500#hw-module module 3 ?

boot   Specify boot options for the module through Power Management Bus control register

reset          Reset specified component

simulate  Simulate options for the module Is it hidden options?

IOS version of c6500 is 12.2(33)SXJ1
 
In the case of Step2 (2nd methods) there is not any button on the front panel of the module?
 
And yet, it is better to remove the module configuration manually or use the command module clear-config prior to removing the module?

View 14 Replies View Related

Belkin Wireless G Network Adapter Seems To Disconnect / Remove Another USB Device From PC

Nov 4, 2012

My USB Belkin Wireless G Network Adapter seems to disconnect whenever I remove another USB device (usually a memory stick) from the PC.The problem started when I accidentally updated the driver via Windows. It didn't seem to work at all with this updated driver and I couldn't roll back or do a system restore to fix it. I'd done this before and ended up doing a complete re-install of Win 7. This time I did an upgrade install and the driver problem was cured.I'm running a HP XW8400 with Win 7 64 Pro which has been faultless for the 5 years I've had it.The only other change I've made recently is that I've stopped using a D-Link USB hub and started using the USB connectors on the HP LP2465 monitor.This only affects the wireless and no other USB devices.

When it disconnects, Win troubleshooting goes through the motions and reverts to LAN and doesn't see the wireless USB at all. This also happens if I don't use the troubleshooter.Device manager shows the driver to be working, but the wireless USB doesn't function even if I connect it directly to a USB port.The router is still working as all other devices in the house are connected.The only way around it seems to be a re-boot, but when this fault happens the PC gets stuck at "Shutting Down". Without the fault, re-boot or shut down works fine.When it happens I have to power off and on. This usually works fine but every now and then I notice the device driver for the Belkin is disabled.I've found a workaround in that I can take out the Belkin USB before removing another USB device. After the USB stick or whatever is removed if I then reconnect the wireless USB it reconnects fine.

View 19 Replies View Related

Linksys Wireless Router :: E3000 - How To Remove Gateway From DNS Servers

Sep 24, 2012

I have a Linksys E3000 and I see the gateway (192.168.1.1) listed in my DNS server addresses. 
1. Why is this listed here in the DNS?
2. How do I remove it from my DNS servers or stop the router from inserting it into my DNS server list?

View 4 Replies View Related

Linksys Wireless Router :: Remove Secondary Network From E2500?

May 11, 2012

I set up a linksys e2500 router with name "mynetwork" and WPA2 password.
 
The network works fine, my laptop connects securely to it.
 
But when I View Available Wireless Networks , I see a second , unsecure network named "mynetwork-guest" to which my laptop will also connect with no credentials (not sure how that network got there).
 
How can I find and delete that unsecure network? When I go into my router setup, I only see mynetwork, not mynetwork-guest If it is of any use here is the IP information for both:
 
The settingd for mynetwork:
 
IP Address: 192.168.1.133
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
 
The setting for mynetwork-guest:
 
IP Address: 192.168.33.137
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.33.1

View 2 Replies View Related

Linksys Wireless Router :: WRT150N Disconnecting - Need To Remove Power To Reconnect

May 23, 2009

My Linksys WRT150N recently gave up on me and started to give me weird issues and started to disconnect (all the ports including wired & wireless) anywhere from 3 to infinite number of times per day and my only solution was to remove the power chord and connect it. I tried all possible ways possible including resetting the router, stopping SSID broadcast, removing the encryption, etc, but non worked. As the router was out of warranty my only option was to take it to the dealers where they told me it would take 3 weeks to fix and God knows how much they would have charged me. But after flashing the firmware with the dd-wrt it has been almost 24 hours without a single problem and now I have the cool option of seeing who is connected to the router, etc. This is a MUST for every Linksys owner.

1. Reset the router using 30-30-30 and waited for 2 minutes for things to come back 2 normal
2. Flashed the router with "dd-wrt.v24_mini_generic.bin"
3. Reset again using 30-30-30 and wait again4. Flashed the router with " dd-wrt.v24_std_generic.bin"5.

View 3 Replies View Related

Cisco :: LMS 3.2 Cannot Remove Device From DCR

Apr 7, 2010

Two switches, which are not configured for SSH and snmvp3, were picked up during an discovery and automatically added to the DCR. When I view the list of devices in the DCR the two devices are shown, but when I try to edit the DCR to remove/delete the two devices they are no where to be found.

View 2 Replies View Related

How To Remove Ad Hoc Network

Jan 23, 2011

how do i remove a ad hoc network that has a ssid?

View 2 Replies View Related

How To Remove Someone From Wifi

Aug 5, 2012

im currently not running a router but comcast xfinity wireless and i download a program that detected someone on my wifi network so now how do i get rid of them?? if im not running a wireless router

View 1 Replies View Related

Cisco :: How To Remove Users In Nm-cue Module

Jun 28, 2012

I know to add a user in the service engine is (config)#user Aileen create but how would you remove it. I tried no before user to negate the command but i do #sh users and the username is still listed.

View 1 Replies View Related

Cisco :: Remove Unwanted Apps From LMS 3.2?

Feb 5, 2013

Is that possible to remove DFM and IPM from LMS 3.2 I have never used and LMS appears to be slow and i am thinking  trimming some unwanted apps may work.

View 3 Replies View Related

Cisco AAA/Identity/Nac :: 4.7.2 / How To Remove Entire NAC

May 6, 2012

We recently received the request to work on removing the entire NAC implementation from our enterprise.  The major problem is that the security team in place now was not around when it was implemented a few years ago.  Weve got about 1500 users, so its not going to be a small project to say the least.  Fortunately for us, the team that set it up didn't do much with it. IT only really checks the user against AD and permits or quarantines the user/machine, that's it. 
 
Version 4.7.2

View 9 Replies View Related

Cisco :: How To Remove Static NAT From 3845

Jul 14, 2012

I am using  cisco (C3845-ADVIPSERVICESK9-M), Version 12.4(11).  some static nat is configured. Now i want to remove all nat and configure again? i am using router# clear ip nat translation *  router (conf) # no ip nat ...... but no enty is beign delating. How to detate all nat or single nat?

View 5 Replies View Related

How To Remove Other Person's Username

Aug 15, 2011

how to remove other person's username from my computer which was served ?

View 1 Replies View Related

How To Remove Content Advisor

Feb 1, 2012

how to remove content advisor

View 1 Replies View Related

Way To Remove Others Username From My Computer

Aug 15, 2011

how to remove other's user name from my computer ?

View 2 Replies View Related

Remove A Home Network?

Feb 15, 2011

I tried to setup a network so i can access wireless printer. Now both my pc's are slow. How do I remove network I setup?

View 1 Replies View Related

ADVERTISEMENT