Cisco Wireless :: SF302-08P Switch / 8 WAP200 - Massive Disconnection?
Feb 19, 2012
For a customer of mine I've installed 8 WAP 200 access points with an SF302 switch. The Access point are powered with POE. All seems to function properly: the clients are simple Android device and the connection appears solid.. We've a good roaming between access points (not seamless of course but is ok) and no particalur problems, also because the network is used to drive very LOW data (no internet): the clients opens a tcp connection to the server and sends only a keep alive packets over this connection.. Then sometime the server send a very small amount of data (some byte) to activate the display of the device and show a question.. the clients reply with some other byte of data and so on.. During an event of 3/4 hour we can do this 12/14 times, so the network load is nearly 0....
Last night the system suddenly stopped working: ALL clients (300) lost connection from their access points at the same time! How this can happens? The only reason that I can imagine is a power loss on the switch...
View 1 Replies
ADVERTISEMENT
Sep 30, 2012
i got the echolife HG520b with this weird problem that's bugging me a lot nowadays which is disconnection. The internet light bulb always go off and the internet cuts every 5-10 minutes. I've tried to reboot with factory settings but it didn't work.
View 6 Replies
View Related
May 22, 2011
What is the difference between SF302-08P and SF302-08MP Switches? Comparison Chart is identical.
View 1 Replies
View Related
Jan 24, 2012
I plan on starting a high speed LAN for my Gaming LAN party's. We send 100's of GB of data over our LAN networking when we do this, so i need a good switch that can handle the stress of the massive data transfers. It needs to be a gigabit switch and at least 8 RJ45 ports.or is there a different one i should get all together? i cant spend a butt load. url...
View 3 Replies
View Related
Jan 29, 2013
Yesterday I had BT Infinity fitted and my main PC (Wired) shows download speed of 70 megs but my laptop only gets around 4 megs download yet 5-6 megs upload.
View 1 Replies
View Related
Dec 21, 2012
Is there a more detailed log or information from the router?I'm still having massive network variations, even with everything wire connected.
View 1 Replies
View Related
Apr 22, 2013
I purchased 3 of these Wireless-G access points and none of them are plug and play. I am here because I have spent the last three hours trying to go through every step they suggest in the Quick Start Guide.
I tried entering in a web browser the default IP address and wait for a login that does not appear.
View 4 Replies
View Related
Oct 30, 2011
For 10 days, I have had massive upload volumes (2 - 7 GB) per day on my home network, not sure why. I am not downloading streaming video or any videos. We have several computers on our network, and I am not sure which one is diong all of this uploading. So, I installed AnalogX Netstat version 2.15 to monitor the stats on my computer, and it shows all totals for incoming and outgoing are "0kb", which I know isn't true.Why isn't it measuring my transmission? I am running Windows 7.
It shows local machine IP x.x.x.x, device All TCP/IP devices, and "remote" worked - I was able to ping url..successfully. But no stats are being measured at all. Not even CPU usage.
View 1 Replies
View Related
Nov 16, 2011
I have a wap200 with a static ipaddress e.g. 192.168.249.205/24 (it is for management and is in vlan 1). Firmware of the wap is 2.0.4.0. No gw and no dns. (they are not necessary) I export the config . I have a second wap200 and import the config.bin to the new wap. ThenI like to change the static address and the name of the new wap, but - and this is the problem - it asks me to fill out the dns (the address for primary dns cannot be 0 and 255), but I absolutely don't want that because there is no dns or gw (management only). And if I fill it out I cannot go the the internet with the wap.
So I also have some other wap200 where I could import the config.bin and change the static ip without giving a dns (firmware 2.0.1.0). can I go back to a previous firmware (Europe) and where can I find it. Looked for it, but seeing only the last one 2.0.4.0 etsi.Or is there another method to skip the dns with a static ipaddress?
View 3 Replies
View Related
Mar 29, 2012
I do have problems with remote management of a Wireless Accespoint WAP200.The WAP200 is connected to a router RVS4000 and works well..There are several nodes in the LAN, all static IP, all forwarded in the RVS4000..All nodes can be managed in the LAN as well as from outside..Exept the WAP200, from inside in LAN no problem, but from outside gives a 404 return.I build other similar LAN's, but the same, no connection.
View 8 Replies
View Related
Oct 31, 2010
I have a Cisco WAP200 Wireless-G Access Point - PoE/Rangebooster with the latest firmware 2.0.2.4-ETSI?I’m trying to set it up as a repeater, repeating the wireless signal from a Cisco 877W.I have configured the WAP200 with the same SSID, WPA key, and channel as the 877W.
I have changed the WAP200’s AP Mode setting to Repeater, and picked up the 877W’s MAC Address.The WAP200 is broadcasting and I can connect to the wireless network, but I don’t get DHCP. It’s almost like it’s still in Access Point mode.
View 3 Replies
View Related
Oct 12, 2010
I'm trying to setup a WAP200 as a wireless repeater and I am having some problems. The SSID I am trying to bridge is coming from a WRV210.
I on both devices I have the SSID, security, and channel set the same. The WAP200 is set to Repeater mode and I did a site survey to find the WRV210. The WRV210 is set to to allow the WAP200 repeat its signa using auto select, manual with site survey and manual actually entering the MAC address by hand.
Nothing seems to work. I can see the wireless next work but when i connect to the repeater I never get an IP address.
View 2 Replies
View Related
Aug 21, 2011
Network set up; wireless router (D-link DIR825) to Cisco switch (SD208p) and have Wap200 hooked to cisco switch to extend range up one floor. Can see it as wireless network, but cannot configure it with web browser. Address 192.168.1.245 just times out via pings as well. Have done all resets, power on reset, etc nothing.
View 3 Replies
View Related
Aug 11, 2011
I have two WAP200's code level version 2.0.4.0 connected to two SFE2000 24port, one switch per building. I have 3 vlans that I want to bridge between those two switches. I know the trunks on the switch are setup correctly because I can connect them directly and test all vlans.
I am able to get the untagged Vlan 1 to work fine with the bridge, but I have issues with the tagged Vlans 2 and 3. I have checked that I have the correct SSID tied to the correct Vlan number. I cause the whole network to lock up when I try to add the other SSID MAC addresses to the AP Mode -> AP Mode -> Wireless Bridge -> "Remote Wireless Bridge's MAC Addresses:" section. The wireless lights and ethernet lights go solid.
Should I be adding the additional MACs there?Does the WAP200 even support multiple VLAN/SSID?
Network diagram: SFE2000 --trunk-- WAP200 --(((((3xSSIDs)))))--WAP200--trunk--SFE2000
View 2 Replies
View Related
Mar 16, 2013
is any way to get information about clients connected to an AP WAP200?
View 2 Replies
View Related
Aug 6, 2012
Which AP's Wap200 can bridge with this ?
View 1 Replies
View Related
Oct 19, 2010
I have 3 WAP200 wireless-G access points. I have one set up as an AP the other two are set up as repeaters to the main AP.
My question is Do I need a lan connection to each repeater ?
also, do I need to create SSIDs for all three? & if so, do they need to be the same?
View 7 Replies
View Related
Feb 15, 2012
I have a Linksys WAP200 Wireless-G Access Point problem. It is SW version 2.0.4.0. I have it configured for a small network and the problem seems to be that it is not forwarding DHCP requests onto my DHCP server. I know that it is not a SSID or Key issue as when I give my devices static IP addresses, they communicate fine within my system. The only issue seems to be when the devices make DHCP client requests. I also know that the problem is not my DHCP server as it has the device's IP / mac addresses in its configuration file and other wired devices are able to communicate with it to get their IP address through DHCP.
I have seen that there was talk in some blogs about WAP200 no forwarding DHCP requests and I was hoping that updating the device to the latest release would have resolved the problems.
View 3 Replies
View Related
Aug 2, 2012
I was brought a WAP200 that was giving a client some issues. I've been told the first thing to try is to update/reinstall the firmware. I have the newest firmware file downloaded and saved, and I have the WAP200 plugged in and sitting on my desk.
I reset the access point and connected it directly to my computer with a patch cable, then entered the default IP address (192.168.1.245) to attempt to access the device. No go. Is that supposed to work and something is wrong with it? All I want to do is update the firmware, because if the device has been reset and the firmware reinstalled and it's still not working, then we'll just deem it defective and have it replaced.
View 1 Replies
View Related
Jan 4, 2013
i have Accesspoint WAP200 Model.iam trying to make repeater mode from other routers ( not linksys or cisco) but not works for me.when try to connect to the network which repeated with WAP200 its trying to take ip then failed ( its like DHCP not works in repeater mode)
View 2 Replies
View Related
Oct 30, 2011
I'm looking at a stack of WAP200 and WAP4410N APs. I'd like to use Cacti to track number of associations on each AP.What's the OID I should be querying? Are there multiple OIDs that would correspond to the multiple SSIDs? I'm running 2 SSIDs on all of them, and it would be extra nice to be able to track number of stations on each SSID, though the total number would also be acceptable as well.
View 4 Replies
View Related
Feb 20, 2013
i have a problem with the AP WAP200, i can't make access to web setup. It gives to me the error "Unauthorised" without asks to me user or pass.
I tried to reset the AP and i tried to access with others pc and smatphones but the problem persists.
View 5 Replies
View Related
Mar 27, 2012
I have a wap200 wireless access point configured and connected to the switch 2690 switch on vlan1, when I connect the wireless access points to the switch the port become disabled.
View 1 Replies
View Related
Feb 6, 2013
Bought wap200. I can't adjust the wireless repeater mode. Linksys x3000 supports wap200? What settings need to be made?
View 1 Replies
View Related
Apr 14, 2012
I just recently had comcast high-speed cable installed, and purchased a Linksys E2500 advanced dual-band N router to get myself going. I'm running an Asus G74s series laptop with windows 7 and everything runs great while I am the only one connected.That being said when another laptop connects (Toshiba satellite also windows 7) the internet stays stable. It isn't until we try and do something that the internet randomly disconnects for 2 or more seconds before re-connecting and putting us in a constant loop of idiotic disconnection.
A quick example would be using the Toshiba to connect to World of Warcraft, I on my Asus can surf the web just fine for about an hour before it disconnects. When I try connecting to a, or the game at the same time it'll allow play for about 7 mins before the net drops for a few seconds then re-connects. This happens frequently no matter the time of day.I have attempted re-setting everything. Everything is up to date including the router. I've attempted to release and renew my IP. However I get this :
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersVirus>ipconfig/all
Windows IP Configuration[code].....
View 5 Replies
View Related
Aug 23, 2012
I thought I had this problem fixed i.e.unticking `allow computer to turn this device off to save power`in Wireless Connection Properties, I still have the problem the diagnostics say I did not receive any response from the wireless router or access point! I have Vista SP2.
View 15 Replies
View Related
Jan 21, 2013
i have issues with my 3 Cisco WAP200, they are rebooting after uptime from 9 to 20 days, i've tried to use latest firmware available 2.0.4.0 but it makes no differance to 2.0.2.4. I can't see logs to point out the problem (by SNMP i found only something like "out of swap space", and nothing by web interface).
View 3 Replies
View Related
Feb 7, 2013
Bought wap200. I can't adjust the wireless repeater mode. Linksys x3000 supports wap200? What settings need to be made?
View 4 Replies
View Related
Oct 19, 2011
I've just got a BRAND NEW HP dv7-6197ca
Specs: Windows 7 64 bit
Processor: Intel i7-2360QM 2.0 Ghz with Turbo boost technology
RAM: 8GB DDR3
Graphics: Radeon HD 6770m 1GB
Storage: 2 x 500 GB 7200rpm
Network Interface: Integrated 10/100/1000 Gigabit Ethernet LAN
Wireless: Wireless LAN 802.11 b/g/n. Bluetooth wireless networking with WiDi
So problem is with persistent disconnection from my landlord's wireless hotspot. The usual exclamation mark at the wireless bar indicating that I'm connected to the network but I don't get internet access...I've got the computer checked up by STAPLES where I bought it and everything was in perfect shape, network card fully functional... I mean it is brand new. They even reformatted the computer and installed clean Windows 7 with no crap software in it...I brought the computer to school and internet works FLAWLESSLY. Disgustingly fast.The problem is only when I'm at home where my internet would work fine for say 5 mins and then the exclamation mark will pop at the wireless bar and I would lose internet access for half an hour or more. I would get the access back and then it would disconnect again.
I called my ISP and they suggested to change my wireless channel to a unique # say channel 11 from 1-11. Turns out the wireless channel already is on 11... I then got it changed to 1 by my landlord. Still same situation. We then tried to change the wireless security encryption (e.g WPA-personal to WPA2). My computer can't connect in that case...On a side note I do have an older laptop (~7 years old), the one I had before purchasing this new computer. This old laptop can connect to the wireless and work PERFECTLY.
So the problem happens only with this new computer, and only at home. I'm completely clueless as to what the problem might be. It looks like some kind of interference but I've tried changing wireless channel (from 11 to 1) which didn't get rid of the persistent disconnection. Could it be interference with another computer that's using the same wireless hotspot in the house?
View 5 Replies
View Related
Mar 9, 2012
We have 5 pcs Cisco Aironet 1142 Access Points without controller at the same building. SSID is same for all of them. Our problem is client connected via wireless disconnecting randomly and continues working after a few seconds. IOS versions are same for all of them you can find detailed information about versions and configurations below.
[code]....
View 6 Replies
View Related
Jun 9, 2013
We have this access point AIR-AP1231G-A-K9 for mobile users. current version is c1200-k9w7-mx.123-7.JA4. Sometimes users are able to associate but not getting IP address from dhcp. It shows 0.0.0.0 for the particular client.
View 2 Replies
View Related
Sep 24, 2011
I have a Compaq Presario V2000 running Windows XP and whenever i close the lid of the laptop the wireless disconnects.
I have all of my power settings set to NOTHING. I have set the adapter, Minimum Power Consumption disabled, same with the Power Save Mode.
View 6 Replies
View Related
Apr 6, 2012
How do I make the following work with Cisco 302-08G ? I have a 4-port Cisco wireless/wired router that allows for a guest account. I also have Cisco SF302-08 that I bought so I could use its port/vlan mirroring capability. How should I configure the network, given the aforementioned equipment, so that I can get a single point sniff.
Assume I have two wireless clients, one using the "regular" wireless SSID, and the other using the "guest" SSID. I can see 192.168.1.x (regular SSID) and 192.168.169.x (guest ssid) on the internet side (one the same physical cat5 of the wireless router. So far so good. But, I would like to use 302-08 to actually allow the guest SSID/network comm cable)unicate with the regular SSID/network. For example, if I ping 192.168.169.x from 192.168.1.x, I would like to see a response. Can I make them communicate properly with the 302-08 ?? if so, what do I need to do ?? (I will also have wired clients tied into the 302-08..so its important that it be the central sniffer point).
View 2 Replies
View Related
